Programming :: C Preprocessor Fails Sanity Check?
Jan 31, 2010
Recently, every time I try to compile an app from its source code, after issuing the ./configure command I get this message:configure: error: C preprocessor "/lib/cpp" fails sanity checkSee `config.log' for more details.I check /lib/cpp but there is not directory named /cpp under /libthis problem occurs on all source packages.
View 3 Replies
ADVERTISEMENT
Aug 3, 2010
I have no idea what I've done but I can't compile from source anymore.
VectorLinux standard 6.0
everything I try to compile fails at ./configure with an error :
Quote:
The content of config.log: (kinda long)
Quote:
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.
It was created by mpc configure 0.8.2, which was generated by GNU Autoconf 2.65.
Invocation command line was:
configure: exit 1
I was intending to recompile gcc from source instead of the the one came with the distro, but to do so I need MPC, which I can't compile.
View 18 Replies
View Related
Jan 1, 2011
when trying to install a tarball i am getting the following error when configuring:
configure: error: in `/home/server/tazzed/mkahawa-printer-0.0.1':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
View 2 Replies
View Related
Mar 17, 2010
am trying to build some programs like lmms or qtraktorbut I often get the reported erro
View 3 Replies
View Related
Jul 2, 2010
is I've restored a tar.bz2 backup I've made, all fine until it comes to configure/make.the backup was made on my laptop, the transferred to another computer, I used tarxvpf filename
and sure backup was madetar -zcvpf filename / (--exclude=dev etc)dist is lfs,he laptopstill works fine, file date, size, mods all the same so quite pu as to way I get"/lib/gcc failed sanity check"when running .configurep.s. laptop and computer both based
View 2 Replies
View Related
Sep 10, 2010
Updating my kernel corrupted grub preventing me from booting. Running the grub shell to restore the primary stage bootloader, restored bootability. It is important to note, that several months ago, I had a similar failure that corrupted the MBR.Are there any Linux based tools to check an HD for sanity? By the latter I am not only understanding software integrity but also hardware sanity.
View 1 Replies
View Related
Dec 7, 2009
Keep receiving the following error message when i try to compile any code:
Code:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
logs test out some code with the C preprocessor and fail, thereby failing the "sanity check" I reinstalled cpp, but to no avail.
View 1 Replies
View Related
Sep 6, 2010
yesterday i tried to install bt4 from alongside ubuntu 10.04. Unfortunately the DVD had some errors and the installation stopped. Everything was fine till then, even the GRUB was working(i guess!) but when i tried to log into my Ubuntu it gave me an error... " /usr/lib/libgconf2-4/gconf-sanity-check-2 exited with error status 256" also there was a popup like "gnome power management was not properly installed ....blah blah blah Contact you network admin"
i have only one user on that system. i tried the single user mode but no success... i then tried to Ctrl+Alt+F1-F6 no success... can't switch to command line(this is my display problem i guess)
i have now decided to install a fresh install but i do need to take the backup. What all should i copy to the new install so that i get the same feel as before?
View 1 Replies
View Related
Jul 22, 2011
I ran update through the terminal and rebooted i get this error message on start up and again after I log in Please Help!! I'm running Ubuntu 11.04 using unity 2d and the latest version of Gnome 2 on a Dell Inspiron 5150 laptop There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 32512)
View 5 Replies
View Related
Dec 24, 2010
I'm reading about GNU CPP(GNU C preprocessor). In the CPP manual -> 1.1 Character sets:
Code:
After preprocessing is complete, string and character constants are converted again, into the execution character set. This character set is under control of the user; the default is UTF-8, matching the source character set. I think "under control of the user" means to use the option -fexec-charset=, right? And in the above part, it says pretty clear: "After preprocessing is complete", so the job -- "string and character constants are converted again, into the execution character set" -- should be done by the C compiler(compilation proper), not GNU CPP. Then the option -fexec-charset= should be an option controlling the C compiler, not the preprocessor. But in the GCC manual, this option is listed in the "3.11 Options Controlling the Preprocessor". I don't understand this, If this option is an option controlling the preprocessor, it conflicts with the CPP manual. How to understand this?
View 4 Replies
View Related
Jan 18, 2011
Why do I still get mutiple definition of "_my_variable" error even after I used the #ifndef preprocessor in my hpp file?
This is my scenario
I have:
1. A.cpp (including X.hpp)
2. B.cpp (including X.hpp)
3. X.hpp
[Code]...
View 4 Replies
View Related
Jun 20, 2011
Having downloaded 11.4 Gnome, finding it did not install I bought it on DVD from ebay, when trying DVD installation my PC is displaying: There is a problem with the configuration server (/usr/lib/Gconf-sanity- check - 2 exited with status 256, I would like to install this rather then just run it off disk
View 9 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Aug 19, 2010
I want to put check menu & check list in utility dialog.i dont know how i do this
View 1 Replies
View Related
Aug 1, 2011
I was able to burn a DVD-RW with K3B (after changing "sudo chmod 4755 /usr/bin/wodim") but when I try to burn to a CD-R it fails after the opc check. I tried changing the write-speed to 8X (since that's the max for this CD-R) but it still fails.
View 3 Replies
View Related
Aug 31, 2009
i have finished installing mysql, howeve some of the files were missing, like mysql.h. i have downloaded a DEV version which has all the files im looking for, however when i add my c++ file to the directory that they are in, it still does not run because it cannot find the mysql.h where does the compiler look for these files, or where should i put them?
View 3 Replies
View Related
Feb 11, 2010
Using 64bit current, I noticed that usbimg2disk.sh fails on dependencies check. It searches for mbr.bin in:
Code:
/usr/lib/syslinux/
but that portion of package now seams to be in:
[code]...
View 1 Replies
View Related
Nov 18, 2010
My friend is having trouble installing Ubuntu on his Asus laptop. He says that when he boots it takes him to a root menu then fails a battery check:
[Code]...
View 3 Replies
View Related
Jul 10, 2010
Googled this and found the same problem mentioned in the yum site:
[root@plouton ~]# yum update kernel
Loaded plugins: refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.6-147.fc13 set to be installed
--> Finished Dependency Resolution
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.4-95.fc13 set to be erased
--> Finished Dependency Resolution
Dependencies Resolved
View 4 Replies
View Related
Feb 13, 2009
I wish to install a new libc.so and have compiled the latest glibc (2.9.90) with the latest gcc (4.3.3) and the latest binutils (2.19, compiled with gcc 4.3.3). Compilation succeeded without errors, although not before I did some non- obvious things (e.g., I had to put '-march=i686' into my CFLAGS to avoid getting undefined symbol errors from the linker). 'Make check' also produced errors, a number of which I averted by doing non-obvious things (e.g., I had to copy iconvdata/gconv-modules and libio/tst-*.input from the source
directory to the build directory, and I had to export into the environment TIMEOUTFACTOR=2; the glibc documentation gave me no clue that I had to do any of those things). Now I am running into an error with rt/tst-cputimer that I do not know how to avert. I have run 'make check' 3 times; here are the 3 results. From rt/tst-cputimer1.out:
And from rt/tst-cputimer2.out:
Before running the 3rd 'make check', I increased TIMEOUTFACTOR
(to 3). It made no difference. From rt/tst-cputimer3.out:
I don't want to install the new libc.so until I can get all the tests to succeed, or, failing that, until I understand the significance of the error, and can intelligently dismiss it.
View 2 Replies
View Related
Feb 21, 2010
After creating a new JFS root file system, boot (actually /etc/rc.d/rc.S ?) fails when checking it with:
Code:
fsck 1.41.8
/sbin/e2fsck: Bad magic number in super-block while trying to open /dev/sda7:
[code]....
View 2 Replies
View Related
Jul 20, 2009
The server comes up after rebooting and after setting the hostname it starts setting up logical volume management. It says that 2 logical volume(s) in volume group "VolGroupOO" now active But then it starts to check the file system and errors with fsck.ext3: Device or resource busy while trying to open /dev/sdb1 [failed]
***An error occured during the file system check
***Droppping you to a shell, the system will reboot when you leave the shell
Give root password for maintenace
After I log in with the root I get the message mesg: error tty device is not owned by group 'tty' Can the forum tell me how to troubleshoot this issue so I can boot back up again? I have 2 harddrives in this server and only 1 drive was detected when I first installed CentOS. The error first appeared when I mounted the 2nd drive at the mount point /UserGeneratedData. drive was formatted with ext3 before mounting and did not have any data on it I don't want any software RAID if thats what seems to be going on with "VolGroup00"
View 4 Replies
View Related
Aug 17, 2010
I am trying to run yum update on my CentOS 5.3 server, 32-bit, but it responds with the following:
Quote:Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
memcached is needed by (installed) memcached-selinux-1.2.8-1.el5.i386
Complete (1, [u'Please report this error in [URL]...
View 1 Replies
View Related
Dec 2, 2009
I have one hard disk for my root partition and a disk array on a separate mount point. I rebuilt my disk array, but I didn't delete my original mount points beforehand because I was hoping it would just "pick up". So now when I boot up, the OS tells me that the filesytem check fails because it can't find the array to map to the mount point. I know that I need to edit my /etc/fstab and remove the line that defines my mount point on the disk array. But it appears to be read only filesystem when I am in repair mode. I can't force the write with vi.
View 3 Replies
View Related
Feb 10, 2010
sql statement. I am trying to check if there is such a value in the database.
Code:
string NewMovie = "ww";
string queryText ;
queryText = "Select * from movie_info WHERE movie_title = '"+ NewTitle +"'";
MYSQL *conn;
conn=mysql_init(NULL);
mysql_real_connect(conn,host,username,password,database,0,NULL,0);
[Code]......
return 0; The problem i am facing is how do i check if the value is found. I read up and found that a query will return a value of TRUE if the query is a success and a FAIL if there is an error. How do i call these values and then based the check on it?
View 1 Replies
View Related
Jul 22, 2011
I have written a tiny script for kernel compilation, which call menuconfig and then compile the kernel. It is working fine. Now I like to test my environment and if it is shell menuconfig will be called and if X then xconfig will be called. How can I check the environment then?
View 7 Replies
View Related
May 25, 2010
I need to check if $var is not start with 0
Code:
read var
if [ $var IS NOT START WITH 0 (or something like 006077) ];then echo 'Good'
View 15 Replies
View Related
Aug 5, 2010
I need to find if, in a folder any directories exist, except a certain one named "mes croquis".What I am trying to say, is that the re already is a directory named "my croquis", which I have to ignore. IF any other directory appears, I have to archive them.I got everything so far, except the starting condition.In other terms , I am lookign for something like this:
IF anyDir EXIST AND name != "mes croquis"
do something
else
[code]....
View 2 Replies
View Related
Apr 30, 2011
I've created (as a homework) to create as many folders as told but I still need to check if the variable is a number or not :
Code: #!/bin/sh
echo "Veuillez saisir un nombre"; read nmbr
nmbrf=$nmbr
while [ $nmbrf -gt 0 ]
do mkdir -p "foo$nmbrf"
nmbrf=`expr $nmbrf - 1`
echo "$nmbrf"
how do I check that nmbr is a number or something else?
View 1 Replies
View Related
May 11, 2011
I have a file with one line. I want to check whether the first character is TAB or space, how can i do this.? using "cut" wont as it "bypasses the tab and space characters"
View 3 Replies
View Related