Software :: Gcc Sanity Check Fails After Restore Tar Backup?
Jul 2, 2010
is I've restored a tar.bz2 backup I've made, all fine until it comes to configure/make.the backup was made on my laptop, the transferred to another computer, I used tarxvpf filename
and sure backup was madetar -zcvpf filename / (--exclude=dev etc)dist is lfs,he laptopstill works fine, file date, size, mods all the same so quite pu as to way I get"/lib/gcc failed sanity check"when running .configurep.s. laptop and computer both based
View 2 Replies
ADVERTISEMENT
Mar 17, 2010
am trying to build some programs like lmms or qtraktorbut I often get the reported erro
View 3 Replies
View Related
Jan 31, 2010
Recently, every time I try to compile an app from its source code, after issuing the ./configure command I get this message:configure: error: C preprocessor "/lib/cpp" fails sanity checkSee `config.log' for more details.I check /lib/cpp but there is not directory named /cpp under /libthis problem occurs on all source packages.
View 3 Replies
View Related
Aug 3, 2010
I have no idea what I've done but I can't compile from source anymore.
VectorLinux standard 6.0
everything I try to compile fails at ./configure with an error :
Quote:
The content of config.log: (kinda long)
Quote:
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.
It was created by mpc configure 0.8.2, which was generated by GNU Autoconf 2.65.
Invocation command line was:
configure: exit 1
I was intending to recompile gcc from source instead of the the one came with the distro, but to do so I need MPC, which I can't compile.
View 18 Replies
View Related
Jan 1, 2011
when trying to install a tarball i am getting the following error when configuring:
configure: error: in `/home/server/tazzed/mkahawa-printer-0.0.1':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
View 2 Replies
View Related
Sep 10, 2010
Updating my kernel corrupted grub preventing me from booting. Running the grub shell to restore the primary stage bootloader, restored bootability. It is important to note, that several months ago, I had a similar failure that corrupted the MBR.Are there any Linux based tools to check an HD for sanity? By the latter I am not only understanding software integrity but also hardware sanity.
View 1 Replies
View Related
Dec 7, 2009
Keep receiving the following error message when i try to compile any code:
Code:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
logs test out some code with the C preprocessor and fail, thereby failing the "sanity check" I reinstalled cpp, but to no avail.
View 1 Replies
View Related
Sep 6, 2010
yesterday i tried to install bt4 from alongside ubuntu 10.04. Unfortunately the DVD had some errors and the installation stopped. Everything was fine till then, even the GRUB was working(i guess!) but when i tried to log into my Ubuntu it gave me an error... " /usr/lib/libgconf2-4/gconf-sanity-check-2 exited with error status 256" also there was a popup like "gnome power management was not properly installed ....blah blah blah Contact you network admin"
i have only one user on that system. i tried the single user mode but no success... i then tried to Ctrl+Alt+F1-F6 no success... can't switch to command line(this is my display problem i guess)
i have now decided to install a fresh install but i do need to take the backup. What all should i copy to the new install so that i get the same feel as before?
View 1 Replies
View Related
Jul 22, 2011
I ran update through the terminal and rebooted i get this error message on start up and again after I log in Please Help!! I'm running Ubuntu 11.04 using unity 2d and the latest version of Gnome 2 on a Dell Inspiron 5150 laptop There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 32512)
View 5 Replies
View Related
May 10, 2011
I install and tested Restore EE Backup server on a test PC with basic configuration and its working fine.
[URL]
The issue i have is where is the location these backup snapshots or files are saving? I want to add a separate Storage to save the backup?
View 1 Replies
View Related
Jun 20, 2011
Having downloaded 11.4 Gnome, finding it did not install I bought it on DVD from ebay, when trying DVD installation my PC is displaying: There is a problem with the configuration server (/usr/lib/Gconf-sanity- check - 2 exited with status 256, I would like to install this rather then just run it off disk
View 9 Replies
View Related
Feb 4, 2011
I am now preparing myself to upgrade lenny to squeeze and decided to do a backup on my system. I used backup-manager to do the job and it worked fine. how do you restore said backup data?
View 4 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Feb 13, 2011
One Laptop. One hard drive. Two OS's. Windows 7 is shot to hell from installing and uninstalling to much crap. Windows & WILL rewrite my MBR. How do I back up my far superior GRUB MBR and restore it over the wincrap MBR once I am done reinstalling Windoze?
View 6 Replies
View Related
Sep 30, 2010
I'm now using Ubuntu 10.04 with ext4 and for the second time in my life I experienced data loss (not for real: I got backups) and I'm assuming problems with the recent ext4 fs.
I want to restore all of my configurations (/etc and the like), data and home on reiserFS: is this possible? What to do in order to accomplish that?
View 2 Replies
View Related
Jun 27, 2010
How to take Backup & how to do restore in GnuCash. I need to take backup of my all accounts & all transactions
View 1 Replies
View Related
Jul 24, 2010
Im running ubuntu 10.04 and I recently had a little adventure whilst trying to disable KMS and deleted all the stuff out of the # kopt line and added the nomodeset thing.Now I crash to easybox everytime I try to boot, how do I restore the backup of said file that I noticed beside it in the folder. Also I saved one to my desktop.
View 7 Replies
View Related
May 6, 2011
how to take tar backup and restore in mysql,Iam new to mysql,i searched in google but i did not get the exact one.
View 4 Replies
View Related
Feb 13, 2009
Do You have any good script to backup and restore Subversion ?
View 1 Replies
View Related
Apr 21, 2011
I have 4 different servers with exactly the same hardware. I set up one of them to have a centos install with all the basic stuff I'd like running on each one. I then created an image of the harddrive with the operating system, and stored it on an external drive. I used dd to copy the external image to one of the new machines. It worked fine, everything booted up as normal and with a few tweaks everything was great. The problem is that the drive is rather large (500gb) and it takes days for dd to copy it over. I decided to try a different route, I booted to a usb (using the linux distro on the ultimate boot cd pre-loaded with gparted). There are two partitions on the external drive, a small (100mb) partition which can easily be copied over with gparted, and the larger 480+gb lvm partition.
Gparted doesn't support lvm, so I used fdisk to create a new lvm partition on the new machine, and then pvcreate/vgcreate/lvcreate to re-create the same volume groups/logical volumes that are in the image on the external harddrive. I rsync'ed all the information over from LogVol00, and made the same swap partition LogVol01 (which took WAY less time). I disconnected the hard drive and renamed the volume group to VolGroup00 (initiall I named it differently, since linux doesn't like having the volume groups named the same). I can mount the LogVol00 partition and see all the files as they should be. But when I try and boot up, it doesn't even go to grub, I just end up with a blank screen and blinking cursor. How to make the drive bootable? Alternatively, a better strategy than using dd to restore this image??
View 2 Replies
View Related
Jun 10, 2015
I have Lenovo IdeaPad z510 laptop.My HDD SMART status is currently "failure". As my laptop is under warranty I can return it to lenovo. So I want to backup as much data as possible (everything is readable). I currently have 3 operating systems: linux xubuntu 14.10, debian 8 and windows 8.1 (triple-boot?). I want to back up only my current debian installation. There are 3 partitions for debian: root (about 50GB), home (>200GB) and swap. I know that I can backup the whole partition using:
Code: Select alldd -if=/dev/sdaX -of=/locaton/of/backup -something
And create .tar file with the whole home directory.
how to restore it later. In /etc/fstab there are references to UUIDs, and as I understand, with new HDD these UUIDs would be different. And possibly the whole partition table would be different. And how would I restore GRUB?I can't make full image of my disk simply because I don't have disk to store it on.Is it possible to create backup on my current debian installation without actually making full HDD backup? Would it work if I would install debian on new disk, then from LiveCD overwrite it with my backup and modify /etc/fstab to match new partitions?
View 14 Replies
View Related
Aug 27, 2009
My laptop is Windows XP Fedora 11 dual boot. I am replacing it because of a defect. The original laptop is fairly new so I could simply start from scratch and setup everything again. But I was thinking there might be a way to do an image backup and restore. My new laptop will be identical to the old one
View 1 Replies
View Related
Feb 22, 2010
I have fedora 12 (amd64) on desktop. I was wondering if there a way to backup and restore all my downloaded updates since installation?! In the same manner that debian has aptoncd. I am planning to migrate on all data to a new partition with clean install and then just move the updates there.
View 6 Replies
View Related
Nov 5, 2010
I do regular full and incremental backups using dar. All disk volumes are labeled and mounted by label. There is no other operating system installed. I built a new system but due to having to RMA a disk, I built the openSUSE system on a disk from the backup cycle. This Maxstor disk has problems which is why it was moved into an external box and the backup system. I now have a replacement disk and wish to replace the Maxstor before it dies. I initially tried a disk to disk clone with clonezilla but this died complaining that a small target partition was smaller than the source partition. It had created the partition and the start and end sectors were identical. There are no problems with the new disk.
I decided that it would be a good opportunity to test a full system disk restore from the backups. I have in the past restored individual files and partitions but have never restored onto a bare boot disk. I have restored and labeled all 6 partitions. The partition containing / has been marked as active. /boot is included in the partition containing /. fstab is valid, menu.lst is valid, device.map needs editing but this is not a problem.
What do I need to do to make this disk bootable. I have looked through the GRUB documentation but if you try some standard GRUB commands in 11.3 you get messages saying don't do this use YAST. I have seen other suggestions ranging from trying to start the not supported system repair option to using dd to copy the MBR which seemed to trash the partitions in the users extended partition.
The YAST bootloader displays "boot from the root partition". I assume that this is currently what is happening rather than what YAST thinks might be a good idea for next time. I suspect that all I have to do is dd the first 512 bytes of the root partition. If this is the case I can add this to the backup process. While I automate backups I do not automate restores. Each restore tends to be different and I am not sure of the best way getting grub to work on a bare disk restore.
View 9 Replies
View Related
Feb 10, 2011
I'm using ubuntu for a few weeks now and i created a backup script that can copy some folders into a .tgz file. Now i want to place back the folders to where they come from and overwrite the original folder. like the /home folder in the .tgz file overwrite the /home folder on my harddrive. I already tried to do this with: tar xvpfz filename.tgz. But after that the folders came in the same folders as the backupfile stands.
How can i do this the right way?
View 1 Replies
View Related
Mar 19, 2011
How to Backup & Restore Installed copy of my UBUNTU 10.10.If I create any ISO or Recovery CD /DVD, saves time to fresh install & update & install favorable software.I use Mobile to connect, works slow to download.
View 3 Replies
View Related
Apr 9, 2011
I'm trying to use this tutorial (URL...) to backup my Ubuntu 10.10 (ext3) operating system. I've successfully gotten it into a TAR file on my external hard-drive, but inside the archive are 2 folders: sda5 and media (/media/sda5/), sda5 ofcourse containing my operating system.
I run VMWare as my virtual machine software, but I could easily run Virtual Box if the situation calls for it. On my virtual machine I created an Extended partition, made a 2GB swap space and the rest is ext3 (ext3 space is mounted as sda1) (at this point, Swap is OFF) here is what I've tried to do inside the virtual machine to restore:
Code:
sudo -s
mkdir /media/FROM/
mkdir /media/TO/
mount /dev/sdb1 /media/FROM/
[Code]...
but instead it just creates the directory sda5 under media of the live ubuntu cd Do I need to CHRoot in these conditions? AFTER I get the files successfully into the virtual machine, how do I go about restoring the grub2 bootloader? Right now I haven't tried to restore grub on my hardware, but I would be interested in doing so. There are a vast immense amount of forum posts about this subject, but all are to mixed results. Can anybody tell me the absolute definite way to restore grub2 successfully, I don't want to try something if it's going to mess up my install, whether I've backed up or not.
for further reference, here is a link to the previous (failed) thread I made about this same subject:
[URL]...
View 4 Replies
View Related
Jun 7, 2011
I have an encrypted volume, which contains LVM volume group with volumes. I have unencrypted /boot and the rest is on that encrypted lvm. I have a backup I want to revert to, but that backup has a different kernel, and I don't know how to update the /boot since I have suspicions that the system won't boot if I just restore / . I think I need to run update-initramfs and grub-install at some point..
View 9 Replies
View Related
Aug 25, 2010
I have requirement on shell scriptingre scripts for the following:
1) Full backup(application and DB): tar all the files and database and copy them in the backup server
2) Incremental back up of files: backup of all the updated filester the last backup.
3) Restoring of backup files: restore the backup files from the backup server to the application server.
View 3 Replies
View Related
Feb 11, 2010
my old 80gb pata HD showed a dual boot Ubuntu - XP on startup, although ubuntu never worked, onlly XP booted.
Recently I tried to Restore a Macrium backup on one of its two partitions, & spoiled something.
On boot up it says:-
GRUB loading stage 1.5
GRUB loading please waite.....
Error 22
I tried to reinstall Ubuntu 10.8 with no success, & also XP with "R" for repair again with no success.
View 1 Replies
View Related
