OpenSUSE Install :: Manually Change Information On Every Kernel Upgrade
Jan 1, 2011
To run my other linux distros on another drive I have been manually entering the kernel and initrid info for each distro on the opensuse yast boot loader. For windows 7 it just runs the mbr on the drive windows 7 is on. However I can not get it to do that on the other linux drive. The problem for me is that on every kernel upgrade I have to manually change the info. I would rather have grub on the sdd linux disk take care of it on the upgrades. The drive that holds the other linux versions is sdd. Opensuse is on sdc.
[Code]...
View 3 Replies
ADVERTISEMENT
Jan 7, 2010
This is my first post here. I'm using Opensuse 11.2 (Gnome)and the inbuilt kernel is 2.6.31.xx. My laptop is having bcm4312 (14e4 : 4315 id)chipset for wireless. (0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) 0e:00.0 0280: 14e4:4315 (rev 01) ) I have read multiple times here in some threads that this kernel will require Broadcom-wl drivers(Tried ,No success with this) And If I want to use b43 drivers , then I need to go for the 2.6.32 kernel (stable one from this release). I've done the same exactly given in some other link -
Steps-
make mrproper
make menuconfig
make dep
make clean
make bzImage
make modules
make modules_install
After rebooting it's not showing anything new.Just the boot menu with the older one. Experts, Kindly let me know what I'm missing?
View 6 Replies
View Related
Apr 10, 2011
I haven't used Linux very much, so I'm not sure how to do this. I'm presently running the 2.6.24-26 version of the Linux kernel on Ubuntu. However, I need to upgrade to 2.6.32. I have the source files (arch, block, firmware, drivers, kernel, include, etc), but I have no idea how to change the source of the kernel, or if there's an easier/automatic way to do this, and I specifically need the 2.6.32 version.
View 2 Replies
View Related
Jun 15, 2010
I have tried to 'rpm -ivh' the 2.6.34-8 image to the 2.6.31-5 on my Suse 11.2. Without any luck, rpm goes fine, however at the next bootup, then udev is about to be initialized, the machine goes down (don't see any message).
But if I install the MileStone 7 of 11.3 on the same machine, it works just fine.
Are there any scripts/howtos I have to follow if I upgrade from 2.6.31 to 2.6.34?
View 9 Replies
View Related
Aug 4, 2010
After a fresh install of openSUSE-11.2 (yes, still 11.2) I noticed that the -desktop flavour of kernel is in use. All types of kernels are installed. Is there any easy way to change the kernel in use with yast? I would prefer -pae to get full use of RAM.
View 8 Replies
View Related
Mar 6, 2011
I am running 11.3 for about 4 months and it suddenly started to hang intermittently, sometimes many times a day. Once KDE restarted and other times the screen went black. Most of the time it was just hanging and I needed to force a shutdown. The only clue I got is KDE displayed a notification saying "Disabling IRQ #24" not long after it started to go nuts.
After searching around, I figured the problem was with my external video card so I pulled it out 2 days ago and so far it didn't freeze again. After searching around some more, I found many users fixed very similar issues by upgrading to kernel 2.6.35 and I am ready to go for this solution. But now, I couldn't find out how to upgrade the kernel. People said it can be done in Yast but I only see version 2.6.34. What is the easiest way to upgrade?
View 5 Replies
View Related
Dec 23, 2009
Recently, I upgraded 11.1 to 11.2. Everything seemed to go fine. However, for some reason the system boots with the debug kernel - 2.6.31.5-0.1-debug. According to Yast every kernel under the sun seems to be loaded on the system. Grub, however, gives two choices - one for the regular and one for the failsafe system. They both boot to the debug kernel.
How do I get this thing to load into the regular, as opposed to the debug, kernel?
View 5 Replies
View Related
Jan 9, 2011
I'm currently on 2.6.32-27 in Ubuntu 10.04, thinking about 'manually' installing a newer/up to date kernel.
View 7 Replies
View Related
Nov 22, 2009
I did a kernel upgrade in openSUSE 11.2 which caused bootchart to fill the root partition or so it would appear as when I rebooted I started getting messages on the console saying bootchartd could not write because the device was full.
Let me begin by describing my system:
Partition table:
fdisk -l /dev/sda
Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00083a53
Device Boot Start End Blocks Id System
/dev/sda1 1 2612 20980858+ 7 HPFS/NTFS
/dev/sda2 2613 15666 104856255 7 HPFS/NTFS
/dev/sda3 * 15667 15927 2096482+ 83 Linux
code....
As you can see from the partition table I have 2GB allocated for the / partition and according to the df command there is 0 free space but du -hx shows / is only using 405MB. What's happened to the almost 1.6GB that should be available?
View 2 Replies
View Related
Nov 10, 2010
I've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.
Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.
View 1 Replies
View Related
Jan 6, 2011
I did apply the updates on 11.1 32bit and upgraded the kernel from 2.6.27.45 to 2.6.27.56.
Now:
Code:
> uname -a
Linux myhost 2.6.27.45-0.1-default #1 SMP 2010-12-01 16:57:58 +0100 i686 i686 i386 GNU/Linux
but:
Code:
> cat /proc/version
Linux version 2.6.27.56-0.1-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2010-12-01 16:57:58 +0100
View 6 Replies
View Related
Apr 29, 2010
Due to some CD burning/reading problems with the laptop I'm installing to, the only install disk that I have been able to get to work is a MinimalCD disk.Unfortunately this only works if I don't ask it to install any extras at all, so I can install Ubuntu, but it is bare bones, and boots to a shell, no GUI or anything like that.What packages do I need to apt-get to bring this minimal install up to the standard Ubuntu install? Does anyone have a list of packages, or a site that will tell me which packages to install?
View 6 Replies
View Related
May 21, 2011
I was about to do upgrade from 11.3 to 11.4.I was following the guide I found in opensuse's website. I was to the point where I had to disable all 11.3 repositories and add the 11.4 at that point I forgot to change my nvidia repository ( I have a g210m graphic card).
thus after the upgrade the X could not start at all. I think this was because Yast could not find the nvidia driver.
Using text mode YaSt2 I added the nvidia driver but after restart I can not see and X running. I receive an error message that the current kernel can not be loaded!!!
I also checked in command line if there is something like Sax2.. but I couldnot find anything.
View 6 Replies
View Related
Dec 13, 2009
how to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
View 1 Replies
View Related
Feb 22, 2010
I got a hold of openSUSE11.2 recently, burned it, and booted the disc up.Now i got a problem.I ain't too experienced in partitioning, so i choose everything as selected in the installation(i downloaded the full DVD, not a live CD)and i got to the partitioning part.I have this:
500GB WD Caviar Blue SATA2
80GB ATA
I installed Ubuntu on the 500gb with wubi and partitioned 30GB for it.Well that one is easier, i have absolutely no experience in installing from a CD/DVD.I saw instlux, but it wouldn't run from Win7 Any guide on how to manually partition 30GB for openSUSE too?
View 3 Replies
View Related
Nov 23, 2010
I am not the most computer savy, so bear with me. I have opensuse installed on my usb hard drive and recently had a windows crash that caused me to lose my opensuse boot menu/grub. Before the crash I had to have the usb drive plugged in in order to boot to windows or opensuse or I would get an error at startup....... I would like to avoid this. Is there anyway to make it so that when I turn on my computer It boots directly to windows, and if I want to go to opensuse then I can plug in my usb drive and manually boot to usb from my boot menu? I would run these two together on my computer but I share this computer and having to have my usb drive plugged in all the time kind of made them mad. So I guess my question is two fold..... Is this possible? And if so can I go into my hard drive through windows and place something in there to allow me to boot to it since my grub is back to the origional windows boot or do I need to use a live cd to access opensuse and do it that way?.
View 1 Replies
View Related
Jan 2, 2010
When trying to install 11.2 from DVD, the user information I entered at the beginning of the install gets lost. I get to the Automatic Configuration step at the end of the install where the computer needs to reboot, and it asks for my user ID and password (it shouldn't do that). It won't accept the user I created (always says login failed), but it will accept root. That really doesn't matter, because the Automatic Configuration step has done anything, and I have a busted install. I've tried the install 4 or 5 times, but it is always the same problem. I eventually reinstalled 11.1 without any problem (though I did have to click Use Entire Disk on the partition section so it would delete the ext4 partitions created by the 11.2 install and create ext3 partitions).
View 3 Replies
View Related
Aug 23, 2010
in the direction of a HOWTO (cant find one via Search or Google)hat tells me how to install dm_mirror to enable a boot of an 11.3 system that uses LVM for root and swap? I really would likecommands rather than using the GUI as it will help me understand what is going on in the background
View 1 Replies
View Related
Dec 11, 2009
default in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
View 9 Replies
View Related
May 15, 2010
I'd just installed a *nix antivirus called Avrira Antivir (from downloaded script & installation files), but it completely froze my system when I tried to start it, and the system freezes at the login screen; which is probably because I selected the option of running it automatically upon startup...So here's the deal: I know that I can run a live Linux usb to mount my current fs, then edit the file(s) that load the Avira processes on startup, but I don't know what these files are, much less which directories they are in!
View 8 Replies
View Related
Jan 27, 2010
openSUSE 11.2 installed on machine with 5GB memory but System Information in KDE desktop shows only 3GB total memory. Just added a further 4GB but no change shown in System Information.
Is there something I must do to have sysinfo report true value and does this mean that memory not shown is not being used?
POST BIOS check shows 9GB installed.
View 9 Replies
View Related
Feb 11, 2010
A few days ago yast did update my computer to a new kernel-desktop 2.6.31.12-0.1.1.
My mainboard is an ASUS P4P800-VM with Intel ICH5 chipset. This new kernel is not able, to poweroff my computer. Older kernels were able to poweroff the computer.
How can I roll back to the older kernel? Yast does only offer the recent kernel.
In /boot there are only files of the recent kernel.
ASUS P4P800
Intel Pentium 4 HT, 3000 MHz, Frontside 800 MHz/Cache 1 MB
3 GB Ram
AGP nVidia 7600GS/512 MB, nVidia driver 190.53, installed from yast.
PCI WLan TP-Link 951N (Atheros chipset, WLan N, driver ath9 was automatically installed)
View 7 Replies
View Related
Aug 17, 2010
How do I upgrade the kernel to 2.6.35 in openSUSE 11.3 x64? Do I add: Index of /repositories/Kernel:/HEAD/openSUSE_Factory to yast and switch system packages from that repo?
View 5 Replies
View Related
Jun 11, 2011
When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
View 6 Replies
View Related
May 24, 2010
My company support a client with an old Redhead server " Linux version 2.6.9-5.ELsmp [URL] (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005" My IT department wants to move this old server to a VMware machine and I'm trying to check if this project can fly. Me my self never worked on an old Linux server there for my first question is can I upgrade the kernel with the command yum -y install kernel..... and when I'm done I'm still going to have the old kernel just in case?
View 1 Replies
View Related
Aug 4, 2010
I just got starcraft 2 and I just found out after installing the game that their is a bug that prevents the game from running on kernel version 2.6.34. I was wondering if anyone could tell me how to upgrade my kernel using yast or such. I use openSUSE 11.3 x86_64.
View 1 Replies
View Related
Feb 23, 2010
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
View 1 Replies
View Related
Jan 8, 2011
explain in simple terms how to safely upgrade to the new kernel (2.6.37)?
View 9 Replies
View Related
Feb 15, 2010
For some reason, my kernel got uninstalled. I have only file called "initrd.img-2.6.26-1-xen-amd64.bak" in my /boot folder. The only other thing is a 'grub' folder. I booted into a rescue OS, but is there a way to install a kernel manually so that I can boot into my original OS again? Can I just download a vmlinuz file into that folder and then fix my menu.lst?
View 1 Replies
View Related
Nov 18, 2010
My machine starts and the grub rescue> flashes .... i tried to manually load into my ubunutu 10.4 kernel-2.6.32-24my commands were
grub rescue>
set prefix=(hdx,y)/boot/grub
insmod linux
[code]....
View 4 Replies
View Related
