Ubuntu Installation :: Manually Upgrade Minimal-Install To Standard Desktop
Apr 29, 2010
Due to some CD burning/reading problems with the laptop I'm installing to, the only install disk that I have been able to get to work is a MinimalCD disk.Unfortunately this only works if I don't ask it to install any extras at all, so I can install Ubuntu, but it is bare bones, and boots to a shell, no GUI or anything like that.What packages do I need to apt-get to bring this minimal install up to the standard Ubuntu install? Does anyone have a list of packages, or a site that will tell me which packages to install?
View 6 Replies
ADVERTISEMENT
Apr 8, 2011
I am trying to setup my HTPC. I wanted to have the most minimal overhead possible so I installed Ubuntu 10.10 server from the mini.iso and just added the ssh option. I then used the following command to give me a desktop environment because I will want to run firefox and it apparently requires this to run.
Here is the command that I ran:apt-get install xorg gnome-core gdm gnome-applets gnome-system-tools gnome-utils ubuntu-artwork compiz-gnome firefox sysv-rc-conf.The desktop works fine and I can open fire fox, however, the remote desktop is missing from the preferences menu.How can I install this? I would like to add the remote desktop option from a command line.
View 6 Replies
View Related
Feb 7, 2010
how do i get a minimal slackware install with the kde desktop? i have this 3gig dvd iso but i don't know what to install i don't want all those bloated stuff in it any help?
View 2 Replies
View Related
Oct 29, 2010
A few upgrades ago, I had also a desktop-kernel installed. I tried starting with the standard and the desktop kernel, but could not see a difference. Why this desktop-kernel and what's the difference with the standard kernel?
HP laptop with Intel(R) Core(TM)2 CPU T5600 - OpenSUSE 11.3 -KDE4.4.4
View 2 Replies
View Related
Jan 1, 2011
To run my other linux distros on another drive I have been manually entering the kernel and initrid info for each distro on the opensuse yast boot loader. For windows 7 it just runs the mbr on the drive windows 7 is on. However I can not get it to do that on the other linux drive. The problem for me is that on every kernel upgrade I have to manually change the info. I would rather have grub on the sdd linux disk take care of it on the upgrades. The drive that holds the other linux versions is sdd. Opensuse is on sdc.
[Code]...
View 3 Replies
View Related
Feb 19, 2010
I've been playing with Ubuntu for severla years, although I've been a casual user, always just installing from the live disc. I'm comfortable with apt-get, and not scared to format, reformat, get angry, calm down, reinstall, etc.
I'd like to upgrade my Dell Mini 9 netbook wti 9.10. one of my problems with 9.04 is space. with the standard install I'm using 3.7 of my 4 Gb of HD and want to try and streamline that. I've starting have problems upgrading my apps because of space to downlod the upgrade to.
I plan on formating and starting from scratch with the minimal CD (transfered to USB), but I want a clear recipe of steps.
Main goals:
- Standard gnome interface (not remix)
- Open office writer, calc, and impress
- Chromium
I know once I get started to type "cli" to install the basics, but then what? Many of the guides I've seen online are several years old. I can handle chromium and Open Office once I'm all up and running, but I don't want to install and then uninstall firefox, gimp, etc.
View 8 Replies
View Related
Mar 31, 2010
So I go to install the Minimal Ubuntu edition and get to the ethernet driver selection part and it can't figure out what driver I have (Odd since Ubuntu regular can).
View 8 Replies
View Related
Jan 13, 2011
I recently downloaded the latest minimal Ubuntu ISO from the official download page.
Is it possible to do a minimal install if I do not have Ethernet capable internet?
I use one of those 3G (cellular) USB modems from companies like Verizon. Basically, it's a cell-phone, with the phone component taken out.
I did something similar with Debian recently, but I had to install the kernel along with the 'dpkg' package, to the HDD. From there, I had to reboot into the core system, install the packages like ppp, wvdial, etc, and then continue with a fresh install of the rest of the system.
There doesn't seem to be a way for me to either install the core files to HDD, or install the internet connectivity packages in the live environment for my modem.
View 9 Replies
View Related
Nov 21, 2010
I installed ubuntu 10.10 using wubi installer, on win 7 64 bit system. how can I migrate from wubi install to standard install. I want to get rid of issues like free disk space and suspend/hibernate not supported in wubi ubuntu. Will LVPM help. I saw on the page it says that it does not supports wubi 10.04. Not sure what version I have, just installed the latest from ubuntu's site.
View 9 Replies
View Related
Nov 1, 2014
I have recently acquired a micro-sized-PC (A Dell FX130) which comes with a VIA C7 processor, 1GB RAM and 1GB onboard flash. The only application I need is a web-browser, I will use the FX130 to access a (very limited) number of web applications and to download/print-html-to-PDF - putting files onto a USB thumb-drive. I want to encrypt the disk to guard against tampering, and to run a restrictive firewall.
When I try to install the i386 debian-7.7.0 image - I run into the snag that it won't let me use guided configuration for the 1GB flash drive... and - when I guess at a sensible partitioning... I find that I run out of space during the standard installs. I note, however, that a whole bunch of significant applications (which I don't need) are being installed.
I am sure I'm missing something - is there an easy way to do a "minimal" GUI install that would make it easy to fit (just) a web browser (Chrome - ideally) and dependencies onto a 1GB bootable flash drive in a 'Debian-standard' fashion?
View 14 Replies
View Related
Mar 4, 2010
I want to install two Linux in my P.C. two partitions mounted to /(one for linux1 e one for linux 2). one partitions mounted to /home (for linux 1 e linux 2 the same time). Two partitions mounted to swap (one for linux1 e one for linux 2). One partitions for BackUP (with the size of 20gb). I have an HD of 80gb. My memory is 256mb. I want to know: The minimal size of swap. (i think that 300mb is enough) the minimum size of partitions mounted in / (will install a lot of programs in both). If i encrypt one partition, what is the difference? I can install two Desktops in the same O.S? I want to install minimum requirements, these programs that come in KDE or Gnome desktop, i don't wanna install they, i can remove from instalation from DVD? I can install Gnome and KDE in the Same time, from the instalation from DVD?
View 4 Replies
View Related
May 25, 2011
I have a couple of 64bit Maverick installs from the minimal CD.They each have about 1100 packages installed. When I started to upgrade one to Natty with the Upgrade Manager, it told me it wanted to install 205 new packages (along with upgrading 877).205 new packages seems like a lot of growth in the minimal install.Why do I need those 205 packages?Then I looked at the minimal CD page where I saw that the minimal CD itself (which has lists of packages not the packages) grew from 15.6 to 22MB.So, did the minimal install just bloat up with Natty or what? Is there an even-more-minimal install?
View 3 Replies
View Related
Jun 21, 2010
I have created virtual cd (using damoen tools) for opensuse 11.2 installation from standard iso file and that installed installer for opensuse in my C drive and asked me to restart. After I restarted it gave me two options during boot, vista and opensuse 11.2 installer. I tried installing opensuse 11.2 from boot option and it asked me for language>country>installation. From the installation window which gave three options, I selected installation option and after preparing system for installation it asked me about sda location....I had separate partition which I selected and after that it is asking me for source which I don�t know what it is. I tried few things but no success and then tried to get in to vista but unfortunately it is not booting in vista as well and takes me though the same process explained above.
So both my boot options are trying to install opensuse 11.2 and stops at provide source window. So in a nutshell I am stuck and not able to use my system. For your information I don�t have vista installation cd so I can�t repair vista.
View 3 Replies
View Related
Apr 5, 2010
I'm new to Fedora (not linux) and I was wondering how I would go about doing a minimal install of fedora 12. I downloaded the live disc but it doesn't give me installation options (I'm new to minimal installs so I don't know that much). I also searched all over looking for a fedora minimal install iso, something similar to the ubuntu minimal install iso that is only 12mb.
View 14 Replies
View Related
May 9, 2010
Trying a minimal install with the mini.iso. I don't have a wired internet connection, only wireless from my iPhone which works fine with my full install of Ubuntu. The installer is not able to find my wireless connection stating "No Network Interfaces Detected". I did try to install yesterday in town with a friends wired internet connection and I got the same result. I'm able to get to the command line in the installer but have no idea how to start my wireless connection so the install can continue. I have searched here, and elsewhere on the net to the point of giving up.
View 7 Replies
View Related
Jul 18, 2010
I'm trying to do a minimal install via a USB flash drive. Everything was good until it tried to recognize my network (wired). It showed "No Network Interfaces Detected" (On Ubuntu and Debian). I wish to do a minimal install since I want to install the programs I want myself. Plus, I have a small flash drive.
I'm using an Atheros AR8151 PCI-E as my card (as shown by Windows). I also have a wireless, though I don't care much about that, wired will probably be easier. Through the command shell, I can see Ethernet Controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0). When I do plug the Ethernet cable in, I don't get the lights on during Linux installation but they do come on in Windows. If I need some additional driver, can I somehow add it to the minimal installation? I was looking through the log file and found that i82365 could not be loaded, a PCMCIA controller. I'm assuming this is separate from the NIC and interfaces between the bus and the NIC.
no idea whether it's because it couldn't find the drivers or because the controller was incorrectly identified. But I'm pretty sure this is why I can't get my network card to work.
View 3 Replies
View Related
Dec 28, 2010
I'm trying to figure out how to perform a minimal install to a USB attached hard drive. A full install works just fine, when I start the install from the LiveCD desktop, all the USB drives are visible and can be installed to. In the minimal install, the requisite kernel modules for USB storage don't seem to be loaded, therefore, my USB hard drive is not visible and cannot be mounted, partitioned, or installed to.
The reason behind this is I'm trying to build an XBMC install on a USB hard drive and want only the minimum backend OS that's necessary as some of the Ubuntu desktop software causes issues with some of the XBMC software. I've posted on the XBMC boards about this, but my questions have gone completely unanswered,
View 8 Replies
View Related
Jan 24, 2011
installed fedora with the minimum option on the dvd. After that i logged it and im tring to install gnome, heres the catch though i only have 950MB worth of space. I noticed if i use the groupinstall "X Window System" it fails because of the space. Also it installs alot of things that I am not interested. what are the command lines to install gnome but with the minimal, no FF, no evolution, you get my point.
View 3 Replies
View Related
Jun 15, 2009
I live in a country where 1Mbit broadband is a premium service for large businesses. I am paying a little over $40 a month for a 128k connection with monthly capping. I want to download Fedora but the download is just huge for my connection, especially as it is used for work 14 hours a day. I have attempted the LiveCD and got the 'ext4 cannot be used for boot' error. I also have several other specialised distros on this machine and it's going to be a pain inserting a new boot partition just for Fedora.
Like it is possible with Slackware, can I just download the first CD of the Fedora 11 set and get a minimal install from this or does Fedora need the whole set of disks? Is there a simple enough net install option that I could use instead? I can't understand why they can't just release something like Ubuntu's alternate install CD.
View 10 Replies
View Related
Aug 6, 2010
I know how to install VLC via terminal sudo aptitude install -vlc But i want to know how to install VLC manually by downloading package or something like that i googled but i didn't found anything ..
View 8 Replies
View Related
May 6, 2011
I've seen this happening to others, but can't find the original bug report I saw. From what I can tell I'm getting the error because I am using a local mirror, as others have successfully updated using "official" mirrors.
What would cause the installer to differentiate between a local and an official mirror? I'm pulling everything anl.gov has for Lucid, Maverick, and Natty, and had no problems using the local mirror to dist-upgrade from 10.04 to 10.10.
The exact error is:
Code:
After your package information was updated the essential package 'ubuntu-minimal' can not be found anymore.
This indicates a serious error, please report this bug against the 'update- anager' package and include the files in /var/log/dist-upgrade/ in the bug report. main.log from /var/log/dist-upgrade:
Code:
2011-05-06 10:15:06,986 DEBUG running doUpdate() (showErrors=True)
2011-05-06 10:15:07,582 DEBUG openCache()
2011-05-06 10:15:07,582 DEBUG failed to SystemUnLock() (E:Not locked)
2011-05-06 10:15:08,032 DEBUG /openCache(), new cache size 1444
[Code]....
View 3 Replies
View Related
Feb 18, 2010
I am running a Dell Dimension 3000 and I intend to install Ubuntu on it. On it, there is a partition, Dell Utility Partition, which I am hesitant to overwrite. The main partition which I want to install Ubuntu on I formatted in ext4. I try to install Ubuntu from the live cd, but it won't allow me to strictly use the ext4 partition. It insists to either use the entire drive or to have me manually choose the partition. How would I go about doing that? I relatively new to Linux in general
View 2 Replies
View Related
Apr 12, 2010
I want to install manually xcb_2.4 on Ubuntu 9.10. The problem is that the package neither contains a configure nor a install file so I cant use './configure' and 'make install'.
View 3 Replies
View Related
Mar 7, 2011
I want to set up ubuntu 10.10 on a computer WITHOUT Internet access.I also need to install a package on it but it has several dependant libraries (eg libX11-dev)If i just have the names of those libraries & the package, where can i find them, so that they can be downloaded onto a pendrive & then installed onto the comp? (What would a library file look like after download?)
Also after i have copied the files onto the other comp (assuming that it was possible), how do i install the library? Would synaptics recognise that i have installed this library if done manually by this method?
View 1 Replies
View Related
Nov 12, 2010
I'm considering upgrading my old fileserver from ubuntu 8.10 to 10.4, but i've got single concern, I have a 5TB sofware raid 5, that i realy don't want to loose in the process. And since it's almost full (below 1TB free), i can't do a full backup.
Is there any problem in with this, if i do the upgrade? i have to upgrade 8.10 to 9.4 to 9.10 to 10.04?
View 2 Replies
View Related
May 3, 2011
I noticed that in Fedora 15 Beta when you choose a minimal install then add ONLY the defaults of the "GNOME Desktop" package, you will get this error: gnome-desktop3-3.0.1-2.fc15.x86_64 has a required package:
system-backgrounds-gnome
When I look for gnome-desktop3-3.0.1-2.fc15.x86_64 it is not on any installation menu list. I prefer gnome, but installed KDE and that worked. Any ideas of getting gnome to work?
View 3 Replies
View Related
Jun 19, 2009
When I try to install fedora 11 from the Live CD I get the hwaddress error and cannot continue. As far as I know there is no fix for that other than installing from the full DVD, but I don't have the facility to do that.What I would like to know is if it is possible to install fedora manually for eg. create the partitions with something like fdisk and copy all the files over from the live disc to the hdd and then install grub to start fedora and use it as if it had been installed normally.
Sorry if this is a stupid question. In my head I have this idea that anaconda is some helper program to install fedora and that it should be possible to do it yourself with the right commands.
View 8 Replies
View Related
Feb 14, 2010
I am trying to install Ubuntu 9.1 on an existing xp op. It is prompting to replace xp.how to install manually the dual boot with out replacing xp
View 1 Replies
View Related
Feb 17, 2010
I have been trying to convert my standard 9.10 desktop installation into the Netbook Remix version.I assumed that all I had to do was add �Netbook Remix Launcher� from synaptic and set it run at startupAccording to the Wiki these are the packages that constitute the UNR:Desktop Switcher - Allows the user to switch between two desktop modes. Currently supports switching between Ubuntu Netbook Remix mode and "Classic Ubuntu" (two panels, gnome-like) mode.
Go Home Applet - A gnome-panel applet that, when clicked upon, displays the desktop. Used in a netbook-based desktop, the desktop-window will normally be the launcher. Go Home Applet also works in conjunction with the netbook-remix-launcher whereby dragging and dropping a file/url/application to the go-home-applet will automatically add it to the launcher's favorites section. Human Netbook Theme - A gtk theme for use with Ubuntu Netbook Remix Maximus - A desktop daemon which will automatically maximise and, optionally, un-decorate windows. Has support for exclusion lists and will work with any EWMH-spec compliant window-manager.
Ubuntu Netbook Remix Launcher - An easy-to-useprogram/places/favourites launcher which resides on the desktop, replacing the main-menu. indow Picker Applet - A gnome-panel applet that displays open windows as icons on the panel, and has integrated window title-bar functionality. Optimised for use on netbook-size screensNone of them seem like dependencies for the Ubuntu Netbook Remix Launcher itself, so I cant understand why it isnt working. Ive turned of compiz and disabled AWN.
View 2 Replies
View Related
Nov 4, 2010
What happened to kde-core? I have two choices of bloat, kde-standard or kde-full. I don't want stuff like konqueror or kmail. I don't want Gwenview, Okular, or Ksnapshot. I don't care for all the media players. I don't need Kaddressbook or Korganizer. Is there a way to do a normal, minimalistic install without this stuff or am I screwed? I want to reinstall on my laptop and the boss' laptop and would prefer not to have the extras,
View 6 Replies
View Related
