After a fresh install of openSUSE-11.2 (yes, still 11.2) I noticed that the -desktop flavour of kernel is in use. All types of kernels are installed. Is there any easy way to change the kernel in use with yast? I would prefer -pae to get full use of RAM.
View 8 RepliesI did zypper dup to move from 11.3 to 11.4. Almost everything works fine. But when I try to add community repositories I get the 11.3 repositories, not the 11.4 repositories. So there must be a .conf or .rc file somewhere telling yast that we're on 11.3 when in fact we are on 11.4. How/where can I change that? And while we're at it, how do I load a Factory repository? They do not appear in the list of Community" repositories.
View 9 Replies View RelatedAs I have 15 repo's enabled in Yast it a bit tedious changing them in the package manager, is there an easier way to bulk change them? Something like doing a kfilereplace on the /etc/zypp/repos.d/ folder and changing all occurances of 11.3 to 11.4 (in all *repo, which are all the files in the folder). Will this work?
View 9 Replies View RelatedYast completely overwrites my very customized /boot/grub/menu.lst. I wrote a Perl script to restore the customizations from the previous version (retained in CVS) but this is more than a little annoying. At least Ubuntu asks. How do I stop this idiocy when upgrading the kernel.
View 8 Replies View RelatedIs there any way to upgrade the kernel from downloaded source code, using yast or zipper (by custom installation repository or something like that)?
View 9 Replies View RelatedWhen I go to openSUSE Download Mirrors - Overview, after I click the "http" of the mirror I want, where do I click down to after that to get the proper url? It just keeps opening new folders, so what's the url I need to put in yast, say for the argonne national laboratory (usa) mirror?
View 2 Replies View RelatedI have just recently found I have a problem under SUSE 10.3. History, I had my PC, an IBM Power Centre box with 4g ram and 2 hard-drives (80gb and 1Tb) fail to reboot after a power drop. Got an error message about the 80gb H/D losing some information. I was able tofix the issues by using "fsck". The PC was able to restart after this, and seemed to be working well.
However in the last couple of days I noiticed that the time was incorrect, it seems the sync for time has switched to normal time too early. Right mouse click to adjust this would not bring up the "adjust time" window. ?Why, unknown. I then decided I would go through "YAST" to do my changes, but now I am unable to load "YAST". I can load it through a terminal window, but there must be some reason why it won't load the GUI? from the menu.? There could be other programs that are also not loading that I have not found.
Q- could something have been lost when I had the H/D reboot issue? And if so is there any way of restoring lost or coruputed OS files?
I have the 10.3 OS on DVD, which is how I installed it, and note that there is a recovey prompt, but need some advise on how to go about it. A total reinstall is not an option at this time until I can get a backup unit running.
Ive a little problem in xen guest machines. The hardware UTC time is grather than the insanity time (ntp doesnt works) and I cant change the date and time from yast. I can`t access the hwclock information (errno=19) unable to get /dev/rtc.
View 1 Replies View RelatedI'm having a wireless issue (go figure) where I can't get to the internet, can get to my LAN just fine, but trying to ping anywhere on the net just gives me "network unavailable" message.One thing I've seen noted here time and again is people saying "Use Yast vs Network manager" when I go through the Yast Network Devices GUI it tells me it's using network manager, and I need to use ifup (if I want to use Yast), however I have no clue how to go about changing it from one to the other?
Currently I'm using hard-link to get all the updates and see if that will resolve my problems, but figured I'd learn how I'm supposed to switch it for the future.
I installed openSUSE on my notebook with an usb drive using openSUSE 11.4 KDE LIVE iso. The installation process set the name to "linux-ygrl" which I don't really like. (I probably just missed the setting during the installation.). I tried to change it through YaST -> Network -> Hostnames and I set everything where needed to the new name and restarted but the changed weren't applied. I searched the web and found out about the /etc/HOSTNAME file which still contains "linux-ygrl". Now I could change it manually but I was wondering if there is a GUI for it? (I mean, openSUSE has for alsmost everything a GUI.
View 9 Replies View RelatedI've tried googling, but can't manage to figure out how to change the priority order of the sound cards in yast. From yast > hardware > sound, I can see the (default) internal audio from the motherboard, and I can see the usb headset that I would like to be using as the default. How should I go about changing the priority order on these devices?
View 3 Replies View RelatedRecently, I upgraded 11.1 to 11.2. Everything seemed to go fine. However, for some reason the system boots with the debug kernel - 2.6.31.5-0.1-debug. According to Yast every kernel under the sun seems to be loaded on the system. Grub, however, gives two choices - one for the regular and one for the failsafe system. They both boot to the debug kernel.
How do I get this thing to load into the regular, as opposed to the debug, kernel?
To run my other linux distros on another drive I have been manually entering the kernel and initrid info for each distro on the opensuse yast boot loader. For windows 7 it just runs the mbr on the drive windows 7 is on. However I can not get it to do that on the other linux drive. The problem for me is that on every kernel upgrade I have to manually change the info. I would rather have grub on the sdd linux disk take care of it on the upgrades. The drive that holds the other linux versions is sdd. Opensuse is on sdc.
[Code]...
I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.
View 9 Replies View RelatedFrom a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.
That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###
So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.
I can get the installation history via the command line:
Code:
rpm -qa --last | less
Is it not possible to get it from YaST in the same way as you can in Synaptic? It would not only be nice to see a basic list, but also what has been pulled in as dependencies and have it grouped by 'installation sets'. Too much to ask?
I don't know why this is happening, however, all of a sudden I am unable to install any packages (from OpenSUSE repos of course) using either Zypper from the CLI or YaST2. Every time I try and install anything, or perfom a zypper dup, I am greeted with the below error message.
Code:
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
I'm no stranger to OpenSUSE's package manager, however I have yet to come across this error before.
when in command line (because i cannot start plasma either) i get an error message stating [/usr/lib/YaST2/bin/y2base: symbol lookup error: /usr/lib64/libstdc++.so.6:undefined symbol: _ZNst_num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE2idE, version GLIBCXX_3.4] i would like to know how bad it is and if it can possibly can be fixed
View 9 Replies View RelatedAnyone know what happened to the nvidia repos and are they going to come back up?
Can't access it through yast, ftp, or a web browser.
The updates used to happen automatically in 11.4 but the last few weeks no updates at all even if I do it manually in yast still no updates is this normal?
View 9 Replies View RelatedI get the following error when YAST tries to install the latest updates----Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index----could it be from removing KWALLET? Now I cannot re-install it due to this error.
View 9 Replies View RelatedIf you go to Vuze: The most powerful bittorrent client in the world. you'll see that you can download a tarball for linux. But, if you're like me, you'd rather get the RPG so you can use YaST to install it, allowing you to add vuze to your application launcher and desktop. After digging through google for the rare RPG files for the latest version of vuze.
Step 1: Download the swt libraries RPM here: ftp://ftp.pbone.net/mirror/packman.i...m.6.1.i586.rpm - ( original link found on this page )
Step 2: Download the Vuze RPM here: ftp://ftp.pbone.net/mirror/packman.i...1.1.noarch.rpm (original link found on this page)
The Vuze package needs the swt libraries pre-installed, so download that one first. In just two clicks, you'll have the latest version of Vuze installed by YaST on your system! BTW, this is my first post and first thread in these forums. I just installed SUSE on Tuesday and it's my first Linux OS I've tried.
Is it possible to configure Yast Software Manager module so that it does not completely exit when done installing a package? It get's annoying to search for a package and install it, the software manager exits, you then have to reopen it, install another etc. a few minutes later.
Seems this would be a config option, but if so I can't seem to find it.
I cannot open YaST nor 'install software' in the GUI. A new window is appears in the panel, but after 10 seconds or so it disappears. When in terminal, i can open YaST.
This happens from time to time and often after a while I can open it again in GUI (also when rebooting). It's very annoying when I want to install something and I cannot open Yast2 (I'm not familiar with terminal, so that's why i want to stay with GUI, which is KDE btw).
I have a problem when trying to update or install new application via Yast, I'm using opensuse 11.3. PackageKit Error repo-not-available: Failed to download /content from Index of /distribution/11.3/repo/oss
View 9 Replies View RelatedI have old laptop that I intend to give away to a child who's family, due to bad financial, has no means to afford it.
I'll quote Ken Starks: "A Child's Exposure to Technology Should Never Be Predicated On The Ability To Afford It"
I have installed openSUSE 11.2 with KDE (as this one works perfectly on that laptop), but I wish to put it in one of the languages (ordered by preference)
1. Serbian
2. Croatian
3. Bosnian
During and post installation there were neither of those languages available.
As I have had some problems using kpagager I've used file asociations to set yast as the default. When I download an rpm the yast icon bounces around for a while and then dies. I assume this means I need another set of yast launch instructions. Suppose I could download to a directory and set it as a repo but would rather just have it launch for rpms as it's quicker. 11.4 KDE 4.6.0
View 9 Replies View Relatedi had the problem that i couldn't surf access the internet while DNS and PING worked well. That i solved with ipv6.disable=1 at boot time. Now i can suf the internet with a browser but YAST is still unable to access the repositories which are accessible with a browser. Can someone please help me what the problem with YAST is?
View 9 Replies View RelatedWhen I am closing yast, from time to time I get this error. Although something segfaults the system seems to behave normally and I do not experience other issues it seams. The error comes up in a small separate window. Yast stays operative. Should I be worried about something? What is the system complaining about actually? Although this happens quite often, it does not happen always.
System is: 11.1 with Linux linux-xu0v 2.6.27.45-0.1-default #1 SMP 2010-02-22 16:49:47 +0100 x86_64 x86_64 x86_64 GNU/Linux and KDE 3.5.10 (r87) Yast: 2.17.69-0.1.1-x86_64
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_klauncher.so
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kded4.so
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running.
[Code]...
I'm not talking about YaST auto-resolving dependencies for me or the auto-updater checking for patches... sometimes, when I start up the Software Management portion of YaST, there will be a package or two marked for installation. Today, for example, it wants ksshaskpass. This is 11.2 64-bit. (I know I'm bucking the trend of 11.3 questions, but I'm hoping you can overlook that.)
Is this behavior expected? I don't think I ever noticed it prior to 11.2.