OpenSUSE Install :: 11.2 Kernel Upgrade Causes Bootchart To Fill Root?
Nov 22, 2009
I did a kernel upgrade in openSUSE 11.2 which caused bootchart to fill the root partition or so it would appear as when I rebooted I started getting messages on the console saying bootchartd could not write because the device was full.
Let me begin by describing my system:
Partition table:
fdisk -l /dev/sda
Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00083a53
Device Boot Start End Blocks Id System
/dev/sda1 1 2612 20980858+ 7 HPFS/NTFS
/dev/sda2 2613 15666 104856255 7 HPFS/NTFS
/dev/sda3 * 15667 15927 2096482+ 83 Linux
code....
As you can see from the partition table I have 2GB allocated for the / partition and according to the df command there is 0 free space but du -hx shows / is only using 405MB. What's happened to the almost 1.6GB that should be available?
View 2 Replies
ADVERTISEMENT
Nov 3, 2010
I get the bootchart.tgz file to be created, but I am unable to convert it to a png file. I have tried several instructions on how to make this conversion, but none of them have worked. Here is the one listed on this forum:
after login to GUI open your browser and go to: Bootchart scroll down to Renderer Web Form and upload bootchart log tarball located in /var/log/bootchart.tgz leave PNG format nex press Render chart button. I do not see the location on the website listed, to upload a file.
The other methods I have tried entail using the terminal to convert the file, but I continue to get errors on a failed conversion, or the wrong commands.Is there by chance I do not have a certain software yet installed to make this conversion on my laptop. I have installed the minimal OpenSUSE 11.3.
View 9 Replies
View Related
Jun 15, 2010
I have tried to 'rpm -ivh' the 2.6.34-8 image to the 2.6.31-5 on my Suse 11.2. Without any luck, rpm goes fine, however at the next bootup, then udev is about to be initialized, the machine goes down (don't see any message).
But if I install the MileStone 7 of 11.3 on the same machine, it works just fine.
Are there any scripts/howtos I have to follow if I upgrade from 2.6.31 to 2.6.34?
View 9 Replies
View Related
Dec 15, 2010
I have a laptop with the CD-ROM apparently broken, so I installed OpenSuSE 11.4 milestone4 from USB stick .unfortunately in the end of the installation I had a GRUB configuration error (twice) . then, in the third time I removed GRUB from the installation procedureSince my other GNU / Linux is Ubuntu, I did update-grub on ubuntu, it detects the presence of OpenSuSE but it does not add it to its grub.cfgwhen I wanted to add it manually to ubuntu's GRUB, I realized that, in OpenSuSE, the /boot path was empty.My Question is: Do you know how to put the files needed to boot OpenSuSE (initrd, vmlinuz , ...) in the directory /boot without installing OpenSuSE's GRUB ?? (ie keep the ubuntu's GRUB)
View 8 Replies
View Related
Jul 19, 2010
Yesterday I've updated my system from 11.2 to 11.3, fllowing the guide at SDB:System upgrade - openSUSE . Everything went fine (except an error during the installation of batik) but after reboot I got a grub error:
And I couldn't boot
After a CD boot, because I didn't want to try the OpenSUSE 11.2 entry, I saw that the entry for OpenSUSE 11.3 was wrong, see below the entries for 11.3 and 11.2:
Code:
And of course it worked and my updated system works fine
View 3 Replies
View Related
Mar 6, 2011
I am running 11.3 for about 4 months and it suddenly started to hang intermittently, sometimes many times a day. Once KDE restarted and other times the screen went black. Most of the time it was just hanging and I needed to force a shutdown. The only clue I got is KDE displayed a notification saying "Disabling IRQ #24" not long after it started to go nuts.
After searching around, I figured the problem was with my external video card so I pulled it out 2 days ago and so far it didn't freeze again. After searching around some more, I found many users fixed very similar issues by upgrading to kernel 2.6.35 and I am ready to go for this solution. But now, I couldn't find out how to upgrade the kernel. People said it can be done in Yast but I only see version 2.6.34. What is the easiest way to upgrade?
View 5 Replies
View Related
Nov 10, 2010
I've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.
Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.
View 1 Replies
View Related
Jan 1, 2011
To run my other linux distros on another drive I have been manually entering the kernel and initrid info for each distro on the opensuse yast boot loader. For windows 7 it just runs the mbr on the drive windows 7 is on. However I can not get it to do that on the other linux drive. The problem for me is that on every kernel upgrade I have to manually change the info. I would rather have grub on the sdd linux disk take care of it on the upgrades. The drive that holds the other linux versions is sdd. Opensuse is on sdc.
[Code]...
View 3 Replies
View Related
Mar 9, 2010
My computer
AMD phemom II 955 X4 Black Edition 3,2 Ghz
Asus M4A785TD-M EVO micro atx
Kingston 4Gb Ram DDR3 1333 mhz (KVR1333D3N9K2/4G)
Disco Duro Western Digital 1 terabyte
LG GH24 Super Multi DvD rewriter
menu.lst
fstab
fdisk /dev/sda
Orden (m para obtener ayuda):
Bios
I have Sata=AHCI
Sometimes it starts and sometimes not. the RAM is memtest OK. The test detects a firmware in the micro hole 15 to 16 mb of memory. The rest is OK.
View 7 Replies
View Related
Jan 6, 2011
I did apply the updates on 11.1 32bit and upgraded the kernel from 2.6.27.45 to 2.6.27.56.
Now:
Code:
> uname -a
Linux myhost 2.6.27.45-0.1-default #1 SMP 2010-12-01 16:57:58 +0100 i686 i686 i386 GNU/Linux
but:
Code:
> cat /proc/version
Linux version 2.6.27.56-0.1-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2010-12-01 16:57:58 +0100
View 6 Replies
View Related
May 21, 2011
I was about to do upgrade from 11.3 to 11.4.I was following the guide I found in opensuse's website. I was to the point where I had to disable all 11.3 repositories and add the 11.4 at that point I forgot to change my nvidia repository ( I have a g210m graphic card).
thus after the upgrade the X could not start at all. I think this was because Yast could not find the nvidia driver.
Using text mode YaSt2 I added the nvidia driver but after restart I can not see and X running. I receive an error message that the current kernel can not be loaded!!!
I also checked in command line if there is something like Sax2.. but I couldnot find anything.
View 6 Replies
View Related
May 13, 2010
I had 9.10 installed on my IBM Lenovo Thinkpad, x301. I was performing updates as normal, and chose the Upgrade button to upgrade me to 10.04. Everything started fine, but upon reboot, no bueno, Kernel Panic!
The exact message was "Kernel Panic ubuntu - not synching VFS Unable to mount root fs".
I thought this was a grub issue. Since grub2 now is installed... But it was not. I think it ended up being a problem with some of my configuration files.
I have three kernels I tried:
1. 2.6.32-22
2. 2.6.31-21
3. 2.6.31-20
The first threw me into the kernel panic.
The second would hang on "init crypto disks"
The third would hang on "checking battery state"
I noticed (from reading another thread) that while these are loading up that you can click on alt-ctl-F1 thru F6 and get prompt. (I also had my home directory encrypted, thought that was part of the problem, but it wasnt).
Once I get passed the loging, I am able to poke around. I tried manually start Gnome via "sudo service gdm start", but it failed. Said it was missing a configuration file. Then I tried on "sudo dpkg-reconfigure gdm" and it would not work. Saying some configuration files are missing or broken. It also said something about dpkg --configure -a, I am assuming this configures everything...
So I tried "sudo dpkg --configure -a" And selected 'y' to every option. Which basically installs the package creators default settings, and viola! Works.
Just wanted to share that knowledge for the other stuck in the upgrade hell.
Normally I would just copy my files off and reinstall, but it was encrypted... Another headache. I guess good in case someone stole my laptop.
Remember try to "sudo dpkg --config -a"
View 7 Replies
View Related
Sep 2, 2010
I recently decided to try out OpenSuSE after a few years of using kubuntu. However, upon lanuching the install disk I get the following kernel panic: "kernel panic-not syncing VFS:unable to mount root fs on unknown-block(3,1)". I am using the 64-bit DVD install and I have verified the md5 of both the download and the disk itself. The specs for my computer are:
Core 2 Q6600
4gb ddr2 RAM
MSI P6N-SLI motherboard
Nvidia GTX 480
View 9 Replies
View Related
Dec 11, 2009
default in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
View 9 Replies
View Related
Mar 14, 2010
Running Open Suse 11.1 with KDE 3.+ using screen resolution (trying to) 1280x1024. I can't get my wallpapers to fill the desktop, they are tiled sometimes and I can't change them. One other thing is I am having trouble with the screensavers, they won't start, and I like to delete some of them?
View 1 Replies
View Related
Oct 12, 2010
Since I installed MS2 I messed up grub. Finally I got 11.3 back to its old glory.
What would be the best procedure to create a backup image with all settings and permissions ...just in case ?
View 5 Replies
View Related
Feb 5, 2011
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies
View Related
Aug 10, 2011
Accidentally I changed the ownership of all the directories under / to my own instead of root:root. Now I am unable to use sudo and many bad things are happening. Is there a way to revert the changes or change the permissions again to root:root or make sudo work ?
View 3 Replies
View Related
May 5, 2011
i use opensuse 11.4 LXDE . after i installed i had a problem with the display blank votes . How to fill out the sound in LXDE ?.
View 2 Replies
View Related
Dec 23, 2008
For all openSUSE users who are now running openSUSE-11.1.
Please fill in the openSUSE-11.1 Hardware Compatibility List (HCL) listing your success/failures with 11.1 with different hardware. Please be very brief (this is not the place for rants).
The URL for the wiki is here: Hardware - openSUSE
Editing a wiki is not everyone's "cup of tea" and for anyone who has hardware information they think should be in the opensuse HCL wiki, but they hate (or can not) work their way through the obscure wiki format, please just send me a PM with ALL the salient hardware details. I'll fill in the wiki for you and then ask you to review it.
View 9 Replies
View Related
Feb 11, 2010
A few days ago yast did update my computer to a new kernel-desktop 2.6.31.12-0.1.1.
My mainboard is an ASUS P4P800-VM with Intel ICH5 chipset. This new kernel is not able, to poweroff my computer. Older kernels were able to poweroff the computer.
How can I roll back to the older kernel? Yast does only offer the recent kernel.
In /boot there are only files of the recent kernel.
ASUS P4P800
Intel Pentium 4 HT, 3000 MHz, Frontside 800 MHz/Cache 1 MB
3 GB Ram
AGP nVidia 7600GS/512 MB, nVidia driver 190.53, installed from yast.
PCI WLan TP-Link 951N (Atheros chipset, WLan N, driver ath9 was automatically installed)
View 7 Replies
View Related
Aug 17, 2010
How do I upgrade the kernel to 2.6.35 in openSUSE 11.3 x64? Do I add: Index of /repositories/Kernel:/HEAD/openSUSE_Factory to yast and switch system packages from that repo?
View 5 Replies
View Related
Aug 18, 2010
I've been running 11.3 on a net book for several weeks and have not had this happen on that computer. On a different computer, which was upgraded from 11.2 to 11.3, now requires a root password to shut down the computer.
View 1 Replies
View Related
May 24, 2010
My company support a client with an old Redhead server " Linux version 2.6.9-5.ELsmp [URL] (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005" My IT department wants to move this old server to a VMware machine and I'm trying to check if this project can fly. Me my self never worked on an old Linux server there for my first question is can I upgrade the kernel with the command yum -y install kernel..... and when I'm done I'm still going to have the old kernel just in case?
View 1 Replies
View Related
Aug 4, 2010
I just got starcraft 2 and I just found out after installing the game that their is a bug that prevents the game from running on kernel version 2.6.34. I was wondering if anyone could tell me how to upgrade my kernel using yast or such. I use openSUSE 11.3 x86_64.
View 1 Replies
View Related
Mar 11, 2010
I have read and read and googled for my specific problem and nothing exactly matches. I have a Nvidia 8400GS, running SuSe 11.1, kernel 2.6.27.45-0.1.1,, Nvidia Drivers 193.5, KDE 3.??. It seems like about every third or fourth time I boot up I have to rebuild and install the Nvidia drivers (the hard way). When I get up and running again, use the Nvidia Control panel and save the settings to Nvidiaxxxxxxx.RC file. Why does this keep happening, any suggestions or threads that might answer this problem?? Also I can't get my wallpapers to fill the desktop, they are tiled sometimes and I can't change them. One other thing is I am having trouble with the screensavers, they won't start, and I like to delete some of them?
View 2 Replies
View Related
Feb 23, 2010
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
View 1 Replies
View Related
Jan 8, 2011
explain in simple terms how to safely upgrade to the new kernel (2.6.37)?
View 9 Replies
View Related
Feb 11, 2010
I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
View 6 Replies
View Related
Jul 21, 2010
differences between Kernel Default and Kernel Desktop? I've found some past threads like this link and this other link, and some other google info, which suggest the only difference would be the io scheduler. Also, I see the default grub choice is "Desktop" and not "Default", so I take this as a suggestion to prefer one over the other.
However, my broadcom 4312 wireless only works on the "default" and not on the "desktop" kernel, so I guess there must be other differences. I just want to evaluate which one is the less long-term risk option to go.
View 1 Replies
View Related
