OpenSUSE Install :: Removing Boot Loader Information / 2nd Grub Screen Does Not Get Displayed?
Jun 11, 2011
When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
View 6 Replies
ADVERTISEMENT
Jun 29, 2010
I have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.
On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.
I have had to reinstall OpenSUSE just to get my PC to boot.
All I want to is remove OpenSUSE from my computer without losing my Win 7 install.
My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.
Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.
View 9 Replies
View Related
Aug 27, 2011
I am running Windows 7 and openSuse 11.3 as a dual-boot system. I had to run a Windows 7 Startup Repair, which apparently reset the Windows boot loader, so now I am not getting Grub. How do I reinstall or reactivate the Grub boot loader? I am assuming I have to use the installation DVD?
View 6 Replies
View Related
Mar 21, 2011
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
View 1 Replies
View Related
Aug 20, 2011
I got an HP ProBook 4520s that comes with 500 GB with Windows 7.
It comes with 4 partitions: SYSTEM, the main Windows partition, HP Recovery and HT Tools.
I tried to have OpenSuse installation to resize the Windows larger partition but it said that it couldn't with this message:
"The partition on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."
So I resized the Windows partition from Windows 7 and added 3 partitions on the empty space for Linux: /, swap and /home. Still OpenSuSE installation has shown this warning message:
"The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot if BIOS support only lba24 (result is error 18 during grub MBR)."
I configured OpenSuSE installation to install on those partitions but Grub could not install the boot loader with this message: "grub> setup --stage=/boot/grub/stage2 --force-lba (hd0,2) (hd0,2)
Error 17: Cannot mount selected partition grub> quit"
I already tried this in OpenSuSE 11.4 but I suspected it needed newer parted and grub versions, so I also tried OpenSuSE 12.1 milestone 3 with the same results.
The installation finishes but no Grub boot menu appears, it goes to Windows as if no Linux was installed, although the installed version is there in the 3 partitions that were created on Windows, I just cannot make them boot.
View 9 Replies
View Related
Dec 12, 2009
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies
View Related
Apr 27, 2010
Does anyone knows how to remove files from grub loader.BTW i found some tutorials but they don`t seem to work.I`ve tried Alt+F2 then I`ve edited this command: gksu gedit /boot/grub/menu.lst but it doesn`t seem to work what do I do?
View 5 Replies
View Related
May 19, 2011
I just did a fresh install of 11.4 and I LOVE IT!!! One of the little issues I am having though, is that there is no login screen. No matter what settings I change it still auto-logs me in.
I am using GRUB and the Boot Loader Location has both "Boot from MBR" and "Boot from Root Partition". Is this right? I would think that I should just boot from the MBR.
View 4 Replies
View Related
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Apr 30, 2010
Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
View 3 Replies
View Related
Mar 15, 2011
under ubuntu how can i install grub boot loader ?is there a program that let me do it ?i would like to add a grub load to an hard disk , and maybe to an usb stick and to a floppy disk
View 9 Replies
View Related
Oct 11, 2010
I want install 10.10 Maverick on a new partition alongside my OS X and 10.04 Lucid installs to see if it works on my machine. I'm a little unsure about some things.
1)Do I need to install the GRUB boot loader on this new partition?
2)Can I use the same swap space or is recommended to create a new swap?
View 5 Replies
View Related
Oct 16, 2010
Toward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.
I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?
Here are my partitions on sda:
...from the shell in the installer, there is no grub.cfg in /target/boot/grub.
View 9 Replies
View Related
Feb 26, 2010
I'm using the RAID1 setup, which is configured in the BIOS, as it is a HP Proliant server. i have 2 500GB hard drives configured in a mirror. when booting the install, it recognises this, and deals with it fine.
The problem is, when it gets to the section of installing the grub2 boot loader, it just stops and gives me the "ubuntu installer main menu" where if i select grub boot loader install it just loops back, and if i select LILO installer, it errors, saying an installation step failed.
It has the option to skip installing boot loader, but then, can i get it to boot a different way? can i boot manually into the server install and then install GRUB and hope it works? can i install grub1 rather than grub2?
View 5 Replies
View Related
May 26, 2010
I have installed Windows Server 2003 after CentOS. Then GRUB boot loader lost. Is there a way I can install GRUB boot loader from Windows?
View 2 Replies
View Related
Feb 14, 2010
I'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:
Ubuntu Installer Main Menu
Choose the next step in the install process:
choose language
configure the keyboard
detect and mount CD-rom
etc...
choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.
View 3 Replies
View Related
Nov 28, 2010
Dual-Boot: Mac OSX and Ubuntu
Want to dual boot 10.04LTS and OS X 10.6.5
But there is no option to install the boot loader (grub) to /dev/sda3 as per the following
using Bootcamp
https://help.ubuntu.com/community/Ma...elInstallation
View 3 Replies
View Related
Jan 17, 2010
I have a Dell Inspiron 1721. Recently I replaced Windows Vista Home Edition (32 bit) with Slackware Linux 13.
Lilo wouldn't work, when I turned on the computer it printed "Li" and then 20 lines of 090909... and then the computer would hang up. So I just used my Slackware-boot-flashdrive-thing that I created during installation to boot my computer and told myself that I would fix it later.
Also, when I installed, cfdisk (or it might have been sfdisk) complained that /dev/sda did not contain a valid MS-DOS partition table. fdisk still worked, so I used it to create a new table, and cfdisk worked fine and the installation went along normally.
I reinstalled Slackware about two days later (I realized that I had installed the 32 bit version instead of the 64 bit). Lilo still didn't work.
I thought it might be something wrong with the Slackware DVD, so I downloaded and attempted to install about 4 different distributions. None of the CDs would work. The computer would start up, Linux would start to load, and the computer would freeze.
Xubuntu was the only distro I had that I could get to install. Halfway through the installation, (Surprise!) I got an error, something like "Package Grub failed to install, you will not be able to boot your new operating system".
The rest of the install went fine, so I restarted my computer and tried to use another one of my CDs to boot Xubuntu. I got the error "/dev/sda does not contain a valid partition table", and later "ext4-fs: checksum failed on dev sda at sector...", and "please specify a valid partition for root=". I am absolutely positive that I entered the correct partition, I triple checked and entered other partition names to make sure.
I'd also like to add that the computer makes horrible crunching noises when it starts up and when I do stuff like press keys. So is something seriously wrong with my hardware, or is there another explanation for all of this? Because I really don't want to have to try to repair the computer and can't pay to have it repaired.
View 8 Replies
View Related
Jan 28, 2010
I've run into a strange problem recently. My primary OS right now is Windows 7, and OpenSUSE is secondary. I had GRUB as the bootloader, and everything seemed fine, but I ran into one problem in Windows 7: one program refused to work correctly with ATI forced anti-aliasing on, but it is needed by others (or else edges look jagged).So I decided to install ATI Tray Tools. But it seems that Windows 7 is being evil and won't let install drivers that their creators didn't pay Microsoft for (thank goodness that's not the case in Linux). That means I had to use a driver overrider program, and that means that it had to change the Windows 7 BCD options. And that's where bootloaders kick in. It seems that Windows 7 is too lazy to check for its BCD on other than active partitions, so it doesn't allow the overrider to function.
So what I did was change GRUB to boot Windows 7 with makeactive flag. The problem now is - it won't deactivate! I no longer get GRUB's boot screen, it just boots to BCD directly. So my question is - is there a way to deactivate (or, rather, reactivate the /boot partition) after Windows 7 shuts down or restarts automatically? Obviously I don't want to use GPartEd each time I want to boot to Linux.
View 7 Replies
View Related
Aug 1, 2010
I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.
I did get a warning that GRUB over 128GB might not be able to boot.
I did enable the MBR.
GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.
I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).
View 3 Replies
View Related
Sep 20, 2009
I am using Fedora 10, and was wondering if it is possible to install Windows XP on a free partition, without it replacing the GRUB boot loader?
View 6 Replies
View Related
Dec 22, 2010
I am a brand new Ubuntu user that just tried to install on an old PC using the 10.10 desktop edition.During installation, I hit an error that the bootloader could not install, and after reading about it on the forums, opted to attempt to install it manually after. I have followed the tutorial located here,[URL].. on reinstalling GRUB2 from the liveCD, which I assume means to boot with the installation CD and select try Ubuntu (given the only other option is install, which I have tried twice) everything up to step 5 in that tutorial seems to run successfully, and I am given a message it is installed, but then when I reboot the system it does not open the GRUB2 menu, rather the CLI interface, which suggests there is no grub.cfg
So I am unable to refresh at the GRUB menu because that command is not recognized by the CLI (and it may not help if I am missing files, so I might have screwed up reinstalling them in step 5, or maybe the "Try Ubuntu" terminal doesn't alter the computer like I thought?)
View 6 Replies
View Related
Apr 6, 2011
A few days ago my Laptop wouldn't hibernate in Windows 7, I managed to fix this problem by going into Windows' Disk Management tool and setting the C:/ Partition as the active partition, this fixed my hibernation issue, however I have just noticed that now when I boot my laptop my GRUB menu no longer appears, instead it just loads Windows straight away as if it was the only OS on my laptop.
I've confirmed it's something to do with my recent Disk Management change as I booted up GParted, removed the boot flag from Windows and when a rebooted my GRUB menu reappeared.
Not sure on how I can both have Windows as the active partition while being able to keep GRUB working also.
My Partition Setup is as follows:
/dev/sda1 C:/ Windows 7 (NTFS) (Boot Flag Set)
/dev/sda2 D:/ DATA (Documents and stuff) (NTFS)
Unallocated 1 MB
/dev/sda3 Extended 146.49 GB (LBA Flag Set)
/dev/sda5 Linux Swap 2.01 GB
/dev/sda6 ext4 20.00 GB
/dev/sda7 ext4 124.46 GB
Unallocated 10.00 MB
I'm running openSUSE 11.4
View 3 Replies
View Related
Jan 24, 2010
I am testing some boot splash screens but the ones I like most are darker and therefore the black font color during boot, well, shows on dark grey or black background, so I can't see.
I would like to change the font color of the messages, but not the results (green=DONE, red=FAILED, etc., I don't want to change that, only the messages like "doing fast boot", "Loading CPUfreq", and all the ones loading stuff, mounting, etc.).
Apparently I need to edit /lib/lsb/init-functions?
I found a few examples on google, mostly for debian based and the ones I have seen are far more complex than the very simple one opensuse uses. So I am stuck here. 11.2 version.
View 5 Replies
View Related
Feb 6, 2010
I tried to install Ubuntu on an external drive, but it doesn't boot, but it installed GRUB on my main HD, and now I can't even boot Windows. I only get a "grub rescue" prompt. I need to remove GRUB. How to do it?
View 6 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Sep 21, 2010
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies
View Related
Sep 2, 2009
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
View 9 Replies
View Related
Dec 1, 2009
Why does my boot loader(GRUB)graphic randomly change to penguins playing on ice.
View 3 Replies
View Related
Feb 18, 2010
I had installed Win Xp on my first physical partition, and SuSe on Second partition now i formated the Xp and the GRUB is vanished from MBR i want to rload it . i tried it using Rescue System but still Show error msg. "cannot load OS" on booting. tried to install and using repair option i selected MBR field . but not working ..
View 1 Replies
View Related
