OpenSUSE Install :: Freezes On Boot Up After New Install?
Nov 16, 2009
I installed openSUSE earlier today, I have Windows 7 on this PC too. I installed using all the default option.Installed fine, booted up. Working perfectly. Used it for a few hoursI changed an option to enable the desktop effects (the 3d effects). When I did this the computer froze completely, I had to pull the plug.When I rebooted the computer froze on reboot.I get to the point where it displays the graphical screen, then the screen switches to the brighter green, higher resloution graphical screen. I get the white progress bar under the chameleon. It gets to half way. Then the mouse cursor becomes quite flickery and slow, and it doesn't progress any further. Again to reboot I have to pull the plug. (Although interestingly the contrast buttons (F4/F5 on my laptop still work).Steps I have taken.I have repeated the install, does exaclty the same thing.
I have downloaded the 32 bit version (I originally installed the 64 bit) and again resinstalled - does exactly the same thing)I have hit escape so I could see the not graphical boot screen, unfortunately it get past that, goes to the graphic screen/progress bar and then hangs at the same place.The LiveCD (running from the CD still works fine)I really dont know what to try. If nothing else could you tell me the quickest way to remove it, delete the grup bootloader and recover the space it took from my partitions.
I love opensuse as it's much snappier than MINT. But my system 11.3 is freezing while booting. I pressed ESC during splash and can see messages on the screen. The last message is ATA3 Exception EMASK. I have uploaded the /var/boot.msg here klogd 1.4.1, log source = ksys - Suse Freeze - CuQAd3dg - Pastebin. There are no other log files!
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3 Kernel-pae 2.6.38.2-4.1 from Kernel Stable. GRUB 0.97-174.1 from openSUSE 11.4 Upstart 0.6.5-33.1 xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
I just wanted to install openSUSE 11.3 64bit. Installation works fine until reboot request. It switches to console, saying that it tries to load without reboot, screen becomes black, i got a cursor with animated wait-symbol and then it freezes. Can't move the mouse, no reaction on keyboard inputs, HDD-led not blinking. If I reset my PC and boot the new installation, it says that an error occurred and asks me to complete the unfinished installation. It starts auto-configuration and freezes again at about 3%. I tried again and some time it did not start the graphical yast but in textmode. The freeze came at the same position, but it posted many lines on console with error messages. I could not scroll, so I saw only parts of it, saying kernel panic and many addresses.
I guessed that it has to do with my chipset and graphics card, it is a nVidia GeForce 9300 chipset (MCP7A) with onboard graphics. It works fine with openSUSE 11.2 64bit by the way, but it was not supported in earlier versions than 11.2. So I tried to install it with proprietary drivers. I started the installation again and added the nVidia repository and a Packman repo and selected the driver which works fine on 11.2. Error was same as above. Next I tried an openSUSE 11.3 32bit Live CD that came with some PC magazine and lay around and it is booting and works fine!
This was confusing to me, so I wanted to try the 64bit version of the live CD. Which was again not booting. It freezes at some part, maybe when it tries to start X. But it also freezes booting with 'nomodeset' (found it somewhere here), in VESA mode and even in textmode! So i guess it's not X what causes the freeze. But it is sometime at the end of booting up, as far as I can say. I would like to use the 64bit version but I don't know where to search for the problem. I checked every checksum before burning, so a broken media should not be the reason
I've got an OpenSUSE 11.0 machine that's been working fine for quite some time. Today it wasn't responding at all to HTTP or SSH requests, so I power-cycled it. Now it's freezing up during boot at "Setting up hardware clock". I can't get past it in the boot-up, whether I use the default or the failsafe boot options.
I'm able to fire it up with a 11.3 install DVD and enter the rescue mode. From there, though, I'm not sure what to do next.
I can't use YAST -- can't boot that far. Most of the threads I've found on this topic via Google recommend doing something in YAST, so I thought I'd nip that in the bud.
I did check the BIOS clock, and it was about a month slow. I reset it manually -- hopefully I haven't screwed myself completely.
Any assistance would be hugely appreciated. This box is running as a server for a few websites, and the users would like them back.
AFAIK this is OpenSUSE 11.0, 32-bit, but I could be mistaken. It might be 64-bit. Where would I check that prior to attempting to boot?
Environmentopensuse: 11.4 x86_64 new install kernel: 2.6.37.6.0-0.5-desktop qemu-kvm install input devices: PS/2 Mouse, EvTouch USB Graphics Tablet
If I just take the mouse and scroll left and right over the desktop, the mouse is "jerky, choppy, randomly freezes, erratic". It occurs all the time. Trying to be more focused and select an object is challenging.
/var/log/messages shows: kernel psmouse.c Explorer mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away Don't know if it is related, but in "Personal Settings" -> "Input Devices" -"Touchpad", there is a "Warning: Touch pad configuration is not supported on this system. ..." I have another virtual machine with the exact same setup running openSUSE 11.2 x86-64, kernel 2.6.31.5-0.1, and the mouse is not "jerky", but I have no wheel support. Comparing logs and config they look alike. I turned off all desktop effects.
I'm trying to do a network installation of opensuse 11.2 on my ASUS eee 701.
- I've downloaded the ISO image, verified it with md5sum, and burned it to CD. - I've used a live CD and fdisk to create a new partition table on the internal SSD (/dev/sda) and a single primary partition of type 83. - I've booted the CD, changed the language to English[UK], and continued.
The installer then told me that there's not enough memory for a graphical installation. This is weird because my ASUS has 1MB of memory and works fine with a live CD, but it's not much of a problem because I'm comfortable with text-based installation.
The real problem is that the installer froze on the next screen while "searching for Linux partitions". I aborted after about 10 minutes of inactivity.
I don't really want to download the entire DVD because I've only got 4GB of SSD and want to set up a trimmed-down system.
Linux newb here. I was looking for a lightweight distro that I really like and Lubuntu was it. I installed in on all three of my comps with out issues and my old Dell desktop(512mb ram) is flying now. Way faster than XP even right after a fresh install of both on the same desktop. On my fourth install, my girlfriends old toshiba laptop, it installed fine. After the restart and reboot it gets to the Lubuntu logo with the 5 dots under it. It gets through 4 of the dots then freezes. I left it for 20 minutes and it was stuck.
I tried booting from cd again and check disc for defects. It said it found 2 files with errors, press any key to reboot. Which I did and it just booted right back into the freeze. Maybe since I have to manually make it boot from cd every time it was wanting to boot back into the CD after the disc check, I'm not sure. I tried burning a new iso on a slower speed, same thing for a total of 3 reinstalls with the same effect. The only thing different about this install compared to my others is:
A) I had to flash the bios from windows before I started to even get the damn thing to be able to boot from CD
B) I decided to just wipe XP and install Lubuntu on the whole drive.
and it was working fine until a faulty power outlet caused my laptop to turn off and on around 2 or 3 times in quick succession.
When i went to reboot, a screen appears with "GNU GRUB version ... " written on the top and i have the option to boot 4 different things, 2 of which are labeled " (recovery mode) " along with the option to do a " Memory Test "
Ive tried booting into all four, and each time a bunch of text streams by and then stops, leaving the prompt " (initramfs)_ " which stays forever, and means nothing to me.
So i decided to try and re-install using the same usb drive that worked before, and the installer boots up fine, but freezes once i click "Forward" to initiate the installation from within the ubuntu OS being run off the USB drive.
I tried using a few different USB drives, and a CD, i even tried installing regular Ubuntu 10.10, but the same thing happens each time - the installer doesn't respond once i click "forward" to initiate the installation.
I just installed Debian Testing on an encrypted partition (using the encryption feature in the installer). Problem is when I boot I enter the passphrase and then Debian starts to load a bit and then it stops and won't move again. During a normal boot the boot stops after : EDAC sbridge : Couldn't find mci handler Then do a recovery mode boot from grub loader so more information is displayed during the boot time and it stops after : [12.513770] fb: switching to nouveaufb from simple it stops there I can't type anything, I can reboot the computer with ctrl+alt+del tho
I was booting just fine in a previous installation on a MBR-partitioned disk (now it's GPT-partitioned). I have to add that during installation I added a second encrypted volume on a HDD (while / is on a SSD) that mounts to /data. When few days ago I installed it on the MBR-partitioned disk it asked me for the /data passphrase pretty fast, now it just seems to boot and asks me only one passphrase until it freezes.
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
I am trying to install ubuntu netbook edition on my Acer aspire one D150. I have tried to do this before with version 9 with no luck so I waited until 10 to see if the problem goes away; apparently it has not. I put the ubuntu install files onto a USB stick according to the instructions from ubuntu here for windows (I have windows xp on the netbook now).
When I shut the PC down and turn it back on with the USB key inserted, the laptop just seems to hang at the ACER splashscreen. This screen is where I could press F2 for setup or F12 for boot order; the buttons do not respond, the USB key appears inactive. Again, it just seems to hang. I've waited for as long as letting it run all night to see if it goes anywhere by the morning with no luck.
I upgraded my Dell 2.53G machine from 10.3 to 11.2 (KDE desktop). Everything seemed fine for the first day. Then the whole desktop froze. No screen update, no keyboard, and, though you could see the mouse move, clicking didn't do anything. The only way out was to pull the plug.
After multiple attempts at fixing it failed, I repartitioned the disk and tried a "clean install". Everything worked for about 2 hours. The system is currently frozen. The harddrive is quiet. The only "3rd party app" was Adobe Flash, pulled from the Non-OSS repository.
i have running more than 50 servers with openSUSE 11.2 for a long time without any problems. After upgrading 30 server to 11.3 some of them are freeezing after one or two days. I can ping, but i cannot log in. At the console i can type in the user and the nothing happens, system has to reboot.
All servers are Hewlett Packard Proliant G4,G5,G6 with 32bit and 64bit. No errors or hints in the systemlog.
I installed OpenSUSE 11.3 a few weeks ago. It freezes 10 - 15 seconds after startup. I got a brief, but incomplete reply to what I thought was another related problem on the forum (OpenSUSE 11.3 / Mozilla Firefox freezes upon moving the mouse), but it turns out that the problem is neither the mouse nor Firefox. It freezes without doing anything special.
Yesterday I migrated from 11.0 to 11.3 (32-bit version) and began customizing personal desktop settings once everything seemed to be working OK. Today I continued customizing the personal desktop settings. Now everything freezes up during shutdown.
The screen goes blank with the arrow pointer frozen in place. Hitting enter or ctrl-alt-esc has no effect. One time, I walked away for 30 minutes to see if it would resolve itself, but there was no effect.
I saw someone is having a similar problem with the 64-bit version, but there were no responses. Where do I go from here?
11.4 has been a bit of a pain. The broadcom driver, b44, for the Broadcom 44xx/47xx, freezes my system. I cannot be the only victim of this faulty driver.
The driver is not for the WLAN, but rather for 10/100 ethernet on a Dell Insprion 1720 laptop.
im reinstalling 11.4 on my laptop and I can't seem to get past the automatic configuration. It installed perfect earlier, and I'm not sure its freezing this time.
I installed Suse 11.3 and it freezes randomly. No mouse control, keyboard. Sometimes the screen renders just the part of it, mostly top part of the screen and then freezes. I've gone through the /var/log/messages and I found this last line prior to restart (not sure if this is relevant) linux-fcvk kernel: [185.318403] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 1
I installed openSUSE 11.2 on my Compaq 2170US laptop. When I select it from the grub menu, everything acts normally until the login screen, which freezes immediately (i.e. before I can select my user account or type in my password).I installed from the full openSUSE DVD and chose the GNOME desktop. Before installing, I took openSUSE for a test drive with the GNOME LiveCD and everything seemed to work fine.
I just upgraded my system from oS 11.2 to oS 11.3 on Thursday. I've chosen the network-CD and booted from an USB-pen-drive, as my netbook doesn't have a CD-drive.I new experience that my computer freezes obviously randomly. It's not just a programme crashing, but the whole computer just halts. Nothings working anymore - mouse is not moving, keyboard doesn't respond, I can't even switch to another tty.I tried to remember what I was doing right before the crashes. Once I used the new netbook-desktop of KDE and had typed for an application in that "cool" new desktop. The desktop wend "blank" (the application folders disappeared and I was waiting till the results were shown) and then the computer froze. Just right now I used Okular, selected some text and opened the context-menu when the computer died, the other time I closed the Yakuake with F12 and the computer didn't respond just right before the window was minimized at the top and last but not least I had that "Expose"-like window arrangement opened and clicked at the black background when everything hang up.
What could be the reason for it? oS 11.2 worked perfectly - I hadn't had any crash during 5 months of intense use. I suspected the new graphics driver, but I can't find any reported bug about the Intel 945 GMA* or anything about the new KDE 4.4.4 on atom processors.
After that both systems hang with a black screen, running high CPU as I could hear the CPU fans running at max speed. Waited on both systems, but had to hard reset both.
#1 (using ext3, but mounted as ext2) tried to reboot, but had a LOT of file system issues that had to be resolved (fsck). After that the Video driver had to be reinstalled. Finally the system did reboot, but all icons on all GNOME desktops (~/Desktop) are white and have the ".desktop" extension in their name.
#2 (using ext4) came backup fine, but also required the video driver to be reinstalled. After that the system worked fine.
Still wondering how to resolve the GNOME Desktop Icon issue with #1. Tried to create a new user, but that had the same effect for the icons (launchers) in ~/Desktop. Icons for "Home", "Trash" and connected networks do display the normal names and have a normal image.
The system frequently freezes the screen. The mouse is still moveable but there is no reaction on any click. Keyboard does not work either (pushing Num-Lock does not toggle the Num-Lock light on the keyboard). However, Alt-Print-b works for a reboot. The only other way out is to turn of the computer.I had this effect some time ago where I thought it was a problem due to the NVIDIA graphics driver. Since then, I changed back to the standard VESA driver and thought the problem would be gone. Just a thought
I toggled through the log files in /var/log which had the file date/time of the crash but I could not find any hint.Which log files could I look as well to dig for the problem? Or any idea for such an effect?
I have a problem where my PC will stop at the BIOS logo screen after a reboot. The keyboard and mouse don't get power ie no lights. I can power off / on and it will boot normally. The problem started after a fresh install and after installing the updates. ie before updates I could reboot and it was ok. I moved from Slackware and have Win7 and they don't have this problem. Also Ubuntu and Arch rebooted normally when I tried them. I have Opensuse 11.4 x64 on it's own HDD (Samsung F3) The system board is an Asus P8P67 Deluxe (Sandy Bridge) and the HDD is on a SATA3 port. Could it have something to do with the EFI BIOS? Would it be worth trying a newer kernel? it may better support my hardware. I'm hesitant as I don't want to break Lirc as it took awhile to get it working properly on the stock kernel.
Also where can I add '/etc/init.d/lirc restart' so I don't have to run it manually every time time I launch XBMC. I couldn't find 'rc.local'
So I installed SUSE 11.1 a few weeks back with two SATA drives andit's been working great. I recently received another SATA drive and wanted to add the space to my /home directory. I installed the drive and then booted up my computer. It goes through BIOS and POST just fine but when I get to GRUB my computer just hangs there. It doesn't throw any errors, it just sits until I hard reboot it. If I disconnect the extra SATA drive and then try to boot again everything starts successfully. I've done a little bit of searchingbut couldn't find much on this problem.pretty new to linux so I could definitely be missing something. Let me know if more details are needed.
i am using DELL XPS STUDIO 1650 with configuration
Processor Intel Core2 Duo Processor P8700 (2.53GHz/ 1066 FSB/ 3MB Cache) Memory 3GB (2 X 2GB) Dual Channel 1066MHz DDR3 SDRAM Hard Drive 320GB 7200RPM SATA Hard Drive Video Card 512MB ATI Mobility Radeon HD 3670 Wireless Network Card Intel WiFi Link 5100 (802.11a/g/n) Half Mini-card
i have installed the new 11.2 OS, every thing went well until i switched on the desktop effect, when i clicked the apply button the whole system freezed, i had to manually switch of the system and re-started. everything went well until the username and password was entered, at the time of the progress bar the system dint respond, but the curser was moving but very slow moment was observed. i tried to repair the system with the repair system option, i tried repairing the file system i got the following error after pressing the help button
"error detected
the Ext4 file system of the partion /dev/sda6 is corrupted. to repair the file system, press repair"
and the second sda7 with the error "the Ext4 file system of the partion /dev/sda6 is corrupted. to repair the file system, press repair"
i pressed the repair button but nothing happen. and i even tried to re install the OS, the same problem exists.
Im running opensuse 11.2 on Linux 2.6.31.5-0.1 64Bit, KDE 4.3.1 with 4GB RAM, Intel duo core processor with Intel graphics card. I initially had opensuse 11.1, which i removed and installed 11.2. Initially everything.Then came the problem, the system starts up fine but then after a few hours freezes, monitor powers off and it wont accept commands from the keyboard or mouse. Meanwhile the lights (caps lock, numeric and scroll) on the keyboard blink. The power light is still on and i can hear the hard disk turning.
I have to forcefully turn the power off and restart but can freeze again after random periods.I do lengthy and demanding computations and its common for the PC to run for weeks without turning it off.
I'm really new to opensuse, and linux in general. I started using 11.2 in may and I'm still having trouble. I started it on a newly refurbished HP Pavillion. It's always seemed to run slow, freezes up when I plug in my external hard drive, won't play music on amarok or it will lag, things like that. When I run it in windows everything works fine. and it has always ran really hot and loud when in opensuse.
To make things worse, lately if I open mozilla, all the programs/windows I have open will disappear, all my tabs will disappear, all the icons on my desktop disappear and my application launcher, clock, etc, all disappear. when i manually shut it down and restart it works fine for a while. I keep trying to find things online but I've got to the point where I'm afraid to mess it up more.
