A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
View 9 RepliesI attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies View RelatedI have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies View RelatedI was a window vista user. I wanted to install suse into my laptop so i shirk a free partition (around 70-80GB free partition) to install suse.After I had installed suse, I found out that I fail to boot my window vista operation system. It had gave me several choices...
1 : suse....
2 : suse....
3 : window 1...
[code]...
I love opensuse as it's much snappier than MINT. But my system 11.3 is freezing while booting. I pressed ESC during splash and can see messages on the screen. The last message is ATA3 Exception EMASK. I have uploaded the /var/boot.msg here klogd 1.4.1, log source = ksys - Suse Freeze - CuQAd3dg - Pastebin. There are no other log files!
My system:
Intel Core2duo
Mother board Intel DG31PR
Intel integrated graphics G33
3 GB DDR2 RAM
250 GB SATA2 Hard drive
My old desktop had a power supply that was going bad, so instead of replacing it again I decided to buy a new PC Desktop. So I ordered from TigerDirect.com and got a grodd AMD computer without a operating system on it as I didn't want that Windows 7 scheisse on it. So I downloaded SuSe 11.4 64 bit, and installed it last night.
At this point I will tell you the new PC has an NVIDIA GeForce 61100 GPU for graphics with 128 mb memory. Also I use an HP W2007 wide display monitor running 1680 by 1050 resolution, that I got over 3 years ago when I was running SuSe 10.2.
So during installation last night of 11.4 when it did the first boot after install, is when I first saw the symptom which is an illegible white screen, with about 100 3 mm lines on it. So I shut down, rebooted and brought it up safe mode and all is fine. The error screen only appears if I boot GRUB with the Desktop or Xen option and only when the boot would switch to display my desktop.
I recall a similar illegible video monitor issue when I first got the display over 3 years ago, and fixed it by changing a SuSe video configuration option, but being I am getting old and I didn't write down what the configuration file was I am at a loss. All my previous SuSe installations never had a problem as I would always choose the Update rather than new install option thus that configuration file was brought across the many releases installations. This video configuration parameter had the monitor resolution sizes in it.
how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies View RelatedI got the blank screen when trying to install openSUSE 11.3 x64, so I was able to successfully install by choosing: Kernel (F6) > Safe Mode
Now I am trying to build my wireless driver, and I also notice that my touchpad is not scrolling. I had this OS installed in Windows 7 through VirtualBox before doing the clean installation, and I remember the touchpad scrolling.
I am thinking that by choosing Kernel Safe Mode to install openSUSE, that it did not install all the repositories, and it is why I am running into some difficulty.
what I need to do to fix my installation as if I had not installed in Safe Mode.
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies View RelatedI have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
i am not able to start gnome desktop though most gnome applications work in icewm and xfce4 newly installed. the system config edit button i cannot understand what keys where to edit? how do we reinstall gnome fully? by the way my system is
intel 845 mother board[gigabyte]
LG Studioworks 520Si monitor.
250 80 Gb disks
512mb mem
LG dvd writer
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
I have installed Ubuntu 9.10 on my Dell GX240. I have severe difficulty logging in. If I try to login on GNOME or GNOME fail safe mode , I just cant get in . I keep getting the login screen again. I am able to go into terminal mode. Sometimes I have to try upto 100 times to login in GNOME or failsafe mode. Once I am in everything is fine. Is there a way to do some troublshooting? Also transfer to USB sticks is very slow - sometimes as slow as 1MB per min. Is this normal with Ubuntu?
View 3 Replies View RelatedI downloaded a debian whezzy media after installation when the system begins to boot the system appears a white screen, and not from any error.
View 2 Replies View RelatedFirst let me say sorry if this is in the wrong thread. I am a bit of a noob when it comes to linux. I was trying to figure out how to get an external monitor as my primary monitor on my laptop when i made a change that cause the desktop environment to keep logging me out. I got it into safe mode and resolved the issue but i have my account set to not ask for a password on login and it keeps booting to safe mode now. I have tried logging out and typing my username to get the option to select the normal desktop but as soon as i enter my username it boots bake in as safe mode. The option to require a password on login is not working in this mode. Anyone know how I can get this corrected?
View 1 Replies View RelatedI have UBUNTU 11:04 and prefer the display given by " SAFE MODE" - is there a way that I can lock to ensure that Ubuntu always boots up in safe Mode.Save me having to remember to change the preferences every time I reboot. Alternatively can I change the display to be equal to that given in Safe Mode.
View 8 Replies View Relatedhow to boot into Safe mode.
View 4 Replies View RelatedI installed 10.04 and want to do this. Is there a hot key? Also, Fyi, Im dual booting with windows
View 4 Replies View RelatedAfter I upgraded to 11.04 I now can only boot in safe mode. When I boot up in regular mode everything on the desktop is showing but I cant open anything. When I try to boot up in the classic mode, which is what I prefer, I just get my wallpaper on my desktop but no icons or anything. I didn't mind the safe mode at first but I now realise I cant install any updates which isn't good. I have 222 updates that need installed.
View 7 Replies View Relatedhow to enable boot in safe graphics mode in the bootable USB that I created for 10.04 by following the instructions in the download page.
Currently when I boot from USB and select installation, the monitor goes off. So I guess safe graphics mode is the way to go.
Now that i have ubuntu how can i boot into vista's safe mode with networking? I tried F8 at start up but it brings me up to a boot device screen. The windows boot loader has been replaced by GRUB so now i can's select safe mode with networking. The only other option i tired is to go to msconfig and change it to safe boot but theres no option for safe mode with networking.
View 2 Replies View RelatedRecently I installed ubuntu aoongside windows 7 in dual boot and everything seems ok. however, i wanted to boot into windows safe mode to resolve a possible driver issue there. problem is, grub menu shows the the normal windows boot option but not the windows safe mode boot option. but i know the boot option exists because it booted once when i accidently shut down windows incorrectly or something and restarted it.
so, how do i boot into windows safe mode?
I didn't see a spot to do it in the grub menu or bios.I have that obnoxious AV Security Suit virus. This may be as good a reason as any to wipe the drives and install win7.
View 2 Replies View RelatedMy friend asked me to look at their laptop as it was not booting up. I checked it and found that you could not even boot into safe mode. I have used a windows boot disk to try and sort any issues but this has not worked. The problem is he never made the recovery disks by the manufacturer so I cant reinstall windows. I can access all the files on the hard drive when running Ubuntu. So what I need to know is it possible to run the manufacturers program to make the recovery disks from Ubuntu.
View 3 Replies View RelatedSo ... right now I'm having an issue after I installed ATI Catalyst 10.8 for my GPU HD 5770.Every time I try to boot, it sends me to init3 (I mean text screen). But when I check and try to switch to init5, it tells me that I'm on init5 already.And I'm still stuck on the text screen. However, safemode is still working (yeah I'm on it right now - -").
I installed ATI driver by using this instuction --- openSUSE Lizards � ATI HD57xxx fglrx drivers under 11.3
Sometimes openSUSE boot ends with these errors:[url]
(I do not know why it prints an error on Ext2 filesystem when the disk is formatted Ext4...)
[url]
Here is my Fstab:
Code:
during boot-up on my desktop, running openSUSE 11.4 with KDE 4.6.3, there are sometimes (not always) some failed services. Most of the time it is postfix and some other service. Today it is just mcelog. So when I switch to the first terminal by strg+alt+F1, I see that mcelog has failed.The system is running anyway, so I wonder if it is safe to turn them off? I would turn off postfix and mcelog. Do I harm the system with that? Would it boot again, after I have turned them off? Or is it recommended to let them stay as they are?As far as I understood, postfix is just a mailserver, which would be used, if I would run a mailserver on my own. But I don´t. I just read mails, via IMAP... But mcelog? Whats that?
View 4 Replies View RelatedI upgraded to fedora 11 from fedora 10 yesterday, I like it ok but when I put the machine in sleep mode and then go to turn it back on it comes up to the log in screen and thats it its frozen. I hate to completely shut down the machine every time I get off.
View 2 Replies View RelatedI installed Ubuntu 11.04 and it refuses to show me a boot menu so I can select single user mode. When it does boot, it continues to cycle as X11 fails, but will not let me change into any of the consoles via control+shift+1-7 or control C or any command. X11/GDM continues to cycle as I hear my video card keep spinning up and down. In every version prior, after 3-4 fails it would give you a shell and say, ok it failed. how to boot into single user mode or escape out of this GDM/X11 fail cycle?
View 1 Replies View RelatedI upgraded my Dell 2.53G machine from 10.3 to 11.2 (KDE desktop). Everything seemed fine for the first day. Then the whole desktop froze. No screen update, no keyboard, and, though you could see the mouse move, clicking didn't do anything. The only way out was to pull the plug.
After multiple attempts at fixing it failed, I repartitioned the disk and tried a "clean install". Everything worked for about 2 hours. The system is currently frozen. The harddrive is quiet. The only "3rd party app" was Adobe Flash, pulled from the Non-OSS repository.