Ubuntu Installation :: Aspire One D150 USB Install Freezes At Boot Time
Jun 28, 2010
I am trying to install ubuntu netbook edition on my Acer aspire one D150. I have tried to do this before with version 9 with no luck so I waited until 10 to see if the problem goes away; apparently it has not. I put the ubuntu install files onto a USB stick according to the instructions from ubuntu here for windows (I have windows xp on the netbook now).
When I shut the PC down and turn it back on with the USB key inserted, the laptop just seems to hang at the ACER splashscreen. This screen is where I could press F2 for setup or F12 for boot order; the buttons do not respond, the USB key appears inactive. Again, it just seems to hang. I've waited for as long as letting it run all night to see if it goes anywhere by the morning with no luck.
View 2 Replies
ADVERTISEMENT
Jun 7, 2011
I've been trying to upgrade from 9.04 UNR to 10.04 UNE on my Aspire One D150. Install goes basically OK, barring the occasional hiccup booting from USB. Actually booting into it from the SSD, though, fails. After POST, all I get is a blank screen with a blinking cursor.
View 9 Replies
View Related
Mar 22, 2010
I had UBR installed and working fine for a month or so, wireless and everything. Then I did a clean re-install while trying to add WinXP to half of my drive.Anyway, with the new install, my wireless chip (BCM4312 802.11b/g) isn't switching on at all. I've tried installing the Broadcom driver that appears when I run Hardware Drivers, but that doesn't help.With the old install, the wireless switch and indicator light on the front of the netbook worked, now nothing.
Output from lshw -C network is:
*-network
description: Network controller
product: BCM4312 802.11b/g
vendor: Broadcom Corporation
[code]....
View 4 Replies
View Related
Jan 30, 2011
I have been customizing my 10.10 NBR to my personal liking.I have already disabled the default Unity "experience" and enabled Gnome.However I have hit a bit of a tough spot with Compiz. It will install, and it appears I enable it in the Visual Effects menu, but I do not think it actually is enables and once I close the dialog it reverts back to the "none" option in Visual Effects.What I dont understand is that Compiz worked fine on 9.10 NBR.I would just give up, but I really want window previews with the Talika plugin.My netbook is a Acer Aspire One D150.
View 1 Replies
View Related
Dec 7, 2010
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies
View Related
Feb 24, 2010
My system freezes every time I install "Drapes",why?
View 4 Replies
View Related
Jul 23, 2010
I have F11 running on my Acer laptop and I'd like to install F13 on a newly created partition.I have downloaded the DVD install a couple of days ago and tried to boot it using different options, but always failed. Below my attempts:
1) first option (Install or upgrade): it took a looooong time (like 4 or 5 hours) to get to the Loading vmlinuz message; after a couple more hours it was still there (with 4 or 5 dots more) and I decided that enough was enough;
2) second option (basic video driver): I tried it with and without the nomodeset option and in both cases the Loading vmlinuz message was immediate, but couldn't get past it;
3) first option (Install or upgrade) with the nomodeset option: again the Loading vmlinuz message was immediate, it added up to 10 or 11 dots and then hung;
4) I also tried to boot the same DVD on another laptop (just to rule out media problems) and quickly reached the first install screen, so the DVD is ok I think.
Note that in ALL the above described attempts, when the boot process hang I see my HD led constantly on and also the DVD led flashing.
View 1 Replies
View Related
Aug 23, 2010
Linux newb here. I was looking for a lightweight distro that I really like and Lubuntu was it. I installed in on all three of my comps with out issues and my old Dell desktop(512mb ram) is flying now. Way faster than XP even right after a fresh install of both on the same desktop. On my fourth install, my girlfriends old toshiba laptop, it installed fine. After the restart and reboot it gets to the Lubuntu logo with the 5 dots under it. It gets through 4 of the dots then freezes. I left it for 20 minutes and it was stuck.
I tried booting from cd again and check disc for defects. It said it found 2 files with errors, press any key to reboot. Which I did and it just booted right back into the freeze. Maybe since I have to manually make it boot from cd every time it was wanting to boot back into the CD after the disc check, I'm not sure. I tried burning a new iso on a slower speed, same thing for a total of 3 reinstalls with the same effect. The only thing different about this install compared to my others is:
A) I had to flash the bios from windows before I started to even get the damn thing to be able to boot from CD
B) I decided to just wipe XP and install Lubuntu on the whole drive.
View 9 Replies
View Related
May 22, 2010
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
View 9 Replies
View Related
Jan 1, 2016
I just installed Debian Testing on an encrypted partition (using the encryption feature in the installer). Problem is when I boot I enter the passphrase and then Debian starts to load a bit and then it stops and won't move again. During a normal boot the boot stops after : EDAC sbridge : Couldn't find mci handler Then do a recovery mode boot from grub loader so more information is displayed during the boot time and it stops after : [12.513770] fb: switching to nouveaufb from simple it stops there I can't type anything, I can reboot the computer with ctrl+alt+del tho
I was booting just fine in a previous installation on a MBR-partitioned disk (now it's GPT-partitioned). I have to add that during installation I added a second encrypted volume on a HDD (while / is on a SSD) that mounts to /data. When few days ago I installed it on the MBR-partitioned disk it asked me for the /data passphrase pretty fast, now it just seems to boot and asks me only one passphrase until it freezes.
View 1 Replies
View Related
Dec 10, 2010
I wonder how can i get download or firmware of my Acer D150 wireless driver. I've been googling it and they provide by .exe ( i think Fedora doesn't open .exe)
View 9 Replies
View Related
Oct 30, 2010
I have and acer aspire 5251-1805 and I have a problem to install ubuntu. When I look at the Bios info there are 6 boot options including booting from CD. But then when I start the computer and press f12 there are only 3 options listed and there is no option to boot from the cd. What should I do?
View 5 Replies
View Related
Apr 28, 2010
I've been using Thunderbird 3.0.x for some time and found in it a good replacement of TheBat. However, few days ago, ubuntu being ubuntu crashed and since then, Thunderbird freezes after 10 seconds every time I try to start it, sending CPU usage through the roof. I have 8 imap accounts in it and my profile folder is ~2.8gb I tried purging the installation. I tried fsck on all partitions. Windows Thunderbird using the same profile folder works just fine.
View 6 Replies
View Related
May 8, 2010
Attempting to install 10.04... I can get to the "Where are you?" screen, then the little circular "please wait" cursor spins forever and ever.
Here are a few things I've tried, with no success:Leaving it alone for hours, hoping it was just taking a really long time. No Dice. Unplugging any hardware that might be causing a problem, including the network card. No dice. Burning it to CD, DVD, and booting from a USB key. No dice. Trying every combination of kernel options I could find in the forums, and setting most combinations found in the "more options" menu in the boot screen. No dice. Booting into the live environment, then installing from there (instead of just choosing "install" directly). No Dice. Booting both from the 32-bit and 64-bit ISOs (my machine is 64-bit)
Note: I have not tried just upgrading from my 9.10 install, and I will not try this. If I can't get a live CD to boot, there's no way I would voluntarily hose my current system by upgrading.
Also note: I checked the MD5 of the ISO, and did the "check the disk for defects" menu option as well. Everything checks out fine.
View 5 Replies
View Related
Apr 17, 2011
have tried to replace WindowsXP with ubuntu netbook 10.10 on my Acer Aspire one (model ZG5), I opted for erasing the disk completely to just have ubuntu on the machineit runs perfectly from the USB drive, but will not boot up after a full installation, I just get a black screen with flashing underscore cursorthere are several threads about this problem but I cannot glean a solution, I have used 2 downloads as I thought the first iso might be corrupted, but still cannot get the system to start upwhat is the next step, is it worth persevering or trying an alternative distro?
View 4 Replies
View Related
Oct 12, 2010
Neither from update manager or live usb pendrive. Can I make liveusb of lucid & delete maverick partition & reinstall? is mbrfix better? I have an ubuntu partion & an xp partition. install from update manager just hangs with orange screen after login. pendrive boot hangs with black screen with syslinux line.
View 1 Replies
View Related
Dec 29, 2009
I recently installed openSuSE 11.2 on an Acer Aspire One, but when the installer try to start the new kernel with kexec it hang up, and if I reboot the system it hang up always, also says that the Acer BIOS is unknown.
View 3 Replies
View Related
Sep 21, 2010
I'm trying to fix a friends EeePC notebook (Asus) running a recently upgraded Ubuntu 10.04 from Karmic Koala. She used the update manager for the upgrade to 10.04 LTS and everything was fine until she had tried to install something from the Ubuntu Software Center (she doesn't remember what happened). After that, both Update manager and Synaptic stopped working.Update manager gives the following error:Quote:Software index is broken. ... Try to use synaptic for something?!...
Then Synaptic manager gives the following error:Quote:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.And when I try that command, the terminal just keeps blinking with the cursor and does nothing for more than an hour. This is the output of the comand:Quote:
jasna@Jasna:~$ sudo dpkg --configure -a
[sudo] password for jasna:
Setting up moodle (1.9.4.dfsg-0ubuntu4) ...
[code]...
View 9 Replies
View Related
May 18, 2010
ubuntu 10.4 suddenly freezes in acer aspire 3620 it is usually freezs when i start to use the keyboard .
View 1 Replies
View Related
Dec 16, 2009
I am trying to boot aspire one from the internal sd slot. (Fedora-sd) Since aspire can't boot directly from internal sd slot because bios do not see sd slot as a boot option, I use a second sd insert on a usb adapter with grub in it (Grub-sd)(actually i use this way to boot Ubuntu 9.10)
I have done the same thing from Ubuntu side (add module too the initrd and point the root to the UUID of the fedora-sd) but the boot stop just after (if I boot normally with the Fedora-sd on the USB adapter)
At this point i can only Ctrl-Alt-Canc.
The boot process stop in the same point if there is no sd on the slot. During boot I can see the sd so seem that the module are loaded but not allow to mount the fs. I add these module to the initramfs : mmc_core mmc_block sdhci sdhci-pci.
View 1 Replies
View Related
Jul 6, 2011
Boot fail symptoms: Stuck at Syslinux first boot line.Ctrl+alt+del can't work. need to shut down whole system by holding the power button for 3 secs.
System:
-New Acer Aspire 5750, a supposedly popular model.
-i5 2410M + HM55
Remark:
Can boot from CD Ubunutu 11.04.
But, what is a new laptop when it cant boot Ubuntu from USB??
View 5 Replies
View Related
Dec 1, 2009
I don't know why, but when i first boot openSUSE at the morning in my Aspire it hangs over and over again. I don't know why is this, but the gecko appear, the white bar appear, and moves 1cm, and then, puff no more blinking from the hard drive. Then i force te reboot, over and over until works.The message is: acerhdf: no Aspire One hardware foundWhen i first installed the mini with openSUSE it works perfect for a week, and then start this problem.I have tried with different kernel flavors (like desktop) and still nothing.
View 9 Replies
View Related
May 4, 2011
Ever since I installed Ubuntu Natty, from time to time, for no particular reason, the entire computer screen freezes, and I am forced to hold the power button on my laptop to restart things with a hard reset. I cannot explain why it happens.
Such an issue never occurred in any of the past installations and versions of Ubuntu. This is a fresh installation of Natty by the way.
Also, I can currently be running a lot or nothing and it does this. Thus, it does not matter what I am actually doing (ie, what programs I might be running).
It has occurred about 10 times since I freshly installed Natty 6 days ago.
View 9 Replies
View Related
Jan 23, 2010
Just installed 9.10 on a R3600. It booted fine, did apt-get upgrade, rebooted, still fine, activated nvidia drivers rebooted and now I just get a black screen.
View 1 Replies
View Related
Jun 4, 2015
After upgrading to Kernel 3.1.16-0-4 my Acer Aspire ES1-311 freezes during startup. I can still enter the recovery mode maintainer shell (sometimes), but sometimes it also freezes after giving me the root shell prompt.
View 12 Replies
View Related
May 25, 2010
Similar problems to mine have popped up elsewhere, but none of the fixes seem to work (or I'm just too stupid). I tried to see what the people at Canonical and elsewhere came up with for Ubuntu 10.4 and, after the live USB checked out fine, I rather foolishly installed the OS on my Acer Aspire One D250 (1GB RAM), to run alongside Windows XP.
It booted up once, I think, and then no more. I believe the problem MIGHT be the Broadcom WiFi stuff, but I'm not sure. Anyway, booting Ubuntu leads to a blank screen with a blinking cursor... which doesn't appear to go away. Recovery mode worked once or twice (had to use ACPI=OFF at least once), then no more. It leads to the same thing: that perpetually blinking cursor.
What I would like is either a fix to get Ubuntu 10.4 launched, or some way to remove the OS and restore my netbook back to what it was. Unfortunately, the MBR fixes that are posted all over cyberspace are useless, as my hidden partition doesn't contain the rtmbr.bin file it needs to work (don't ask me why--I've already posted that question at the AAO user forum). So it seems a fix to launch Ubuntu is the only solution, so that I can at least set grub to launch Windows XP rather than Ubuntu.
View 2 Replies
View Related
Nov 13, 2010
I'm thinking of buying an Acer Aspire D250 loaded with Win7 and then adding a version of Ubuntu.
The netbook will come with the Acer recovery facility to reinstall Win7 from a recovery partition in the event of OS failure. This means that the MBR and subsequent loaders need to be preserved for this function to remain (I don't have a Win7 disc and don't want to have to buy one).
I'm happy with a basic Win/Linux dual boot setup but I'd value any comments/suggestions as to how to preserve the recovery function when I add Ubuntu.
View 9 Replies
View Related
Oct 26, 2010
I don't know why but since I upgraded the KDE 4.4 desktop from openSUSE 11.3 to 4.5, the desktop just freezes some times.
If i was listening music, or watching a video I can still hear everything and even move the mouse, but nothing works.
So I switch to TTy1, perform a init 3, then init 5 to restart all the graphic system, and start again. This happens without message, without log, and without clue...
Should I downgrade to 4.4 or this has a Workaround?
View 2 Replies
View Related
Aug 7, 2009
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
View 3 Replies
View Related
Mar 3, 2011
I have been attempting to install Ubuntu 10.10 on my Acer Aspire One for a few days now. Its current OS is Win7 Starter, if that even matters.
-I made a USB drive and Ubuntu boots and runs just fine.
-I hit the "install Ubuntu" icon and it has me choose my language, then I hit forward.
-It asks if I want to install updates and/or third party apps, I check the boxes and hit forward - and then it just sits there with the cursor spinning like its trying to do something, but it never does. The longest I have let it sit there was four hours, and still nothing happened.
**This is the step it always stops on. Could the problem be that I am trying to install the desktop version instead of the netbook version? I tried the netbook version and I just don't like it as much.
View 4 Replies
View Related
