I installed openSUSE 11.2 on my Compaq 2170US laptop. When I select it from the grub menu, everything acts normally until the login screen, which freezes immediately (i.e. before I can select my user account or type in my password).I installed from the full openSUSE DVD and chose the GNOME desktop. Before installing, I took openSUSE for a test drive with the GNOME LiveCD and everything seemed to work fine.
View 4 Replies
When I try to login with my username, the one I created when I installed the OS, it seems to try to login but almost immediately kicks back to the login screen. No authentication error it just seems to just logout? The only change I made since last successful login was to add ". .alias" to the .profile file - the only entries in the .alias file are comments and "alias" commands. I have one other username but it is not in the sudo's list of users so I can not change anything in the master login.
View 3 Replies View RelatedI have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View Relatedbeen using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies View RelatedEvery account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies View RelatedThe graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
The system frequently freezes the screen. The mouse is still moveable but there is no reaction on any click. Keyboard does not work either (pushing Num-Lock does not toggle the Num-Lock light on the keyboard). However, Alt-Print-b works for a reboot. The only other way out is to turn of the computer.I had this effect some time ago where I thought it was a problem due to the NVIDIA graphics driver. Since then, I changed back to the standard VESA driver and thought the problem would be gone. Just a thought
I toggled through the log files in /var/log which had the file date/time of the crash but I could not find any hint.Which log files could I look as well to dig for the problem? Or any idea for such an effect?
I have a problem where my PC will stop at the BIOS logo screen after a reboot. The keyboard and mouse don't get power ie no lights. I can power off / on and it will boot normally. The problem started after a fresh install and after installing the updates. ie before updates I could reboot and it was ok. I moved from Slackware and have Win7 and they don't have this problem. Also Ubuntu and Arch rebooted normally when I tried them. I have Opensuse 11.4 x64 on it's own HDD (Samsung F3) The system board is an Asus P8P67 Deluxe (Sandy Bridge) and the HDD is on a SATA3 port. Could it have something to do with the EFI BIOS? Would it be worth trying a newer kernel? it may better support my hardware. I'm hesitant as I don't want to break Lirc as it took awhile to get it working properly on the stock kernel.
Also where can I add '/etc/init.d/lirc restart' so I don't have to run it manually every time time I launch XBMC. I couldn't find 'rc.local'
Sometimes, (the most when I'm making changes in something, like the pager, appearance, theme, etc), the screen freezes completely (but mouse is moving) and I have to restart the system.
If I try it again, it crashes at the same point.
I installed opensuse11.4 few minutes back. The install was absolutely smooth. I have dual boot, Win Xp and 11.4 now. But for some reason I do not see the login screen but instead I see a green screen with squares and stripes. Login in the failsafe mode is successful. How do I fix it?
Also noticed the following,
1) Initially the splash screen picks up the right resolution 1024*768 and then it changes it to a higher resolution. This I think I can fix, because I had faced a similar problem with 11.3 as well.
Graphics Card: GeForce 7025/ nForce 630a.
When I attempt to install the OS on my PC, the install software crashes immediately after I select US-English on the first screen. I'm copying the entire error report below. My system is configured as follows: Gigabyte P35-DS3R motherboard with 4G RAM. (FYI, I'm using the 32-bit LiveCD just because I may need a 32-bit OS for some purposes. I know this means I may not be able to use all of my RAM.) There are 3 500G hard drives connected to the computer. /dev/sda and /dev/sdb are RAID-1 mirrors via the on-motherboard ICH9R RAID chip. The logical partitions show up as /dev/dm-1, /dev/dm-2, /dev/dm-3, /dev/dm-4, and /dev/dm-5. When I type `fdisk -l`, I can see sda, sdb, and dm-* all separately. (I can provide the full output of `fdisk` if anybody wants to see it.)
/dev/sdc is a standalone drive without RAID.
I want to install Fedora on /dev/dm-2 with swap on /dev/dm-5. Currently, /dev/dm-1 and /dev/sdc2 each contain a separate installation of WinXP. I suspect the problem is with detecting RAID, thus I have deleted most of the error report that doesn't seem to concern storage detection.
[code]....
I've had Ubuntu for months but now it freezes at the login screen. I've written what I did when I last used Ubuntu in a post below. (like undo the xorg upgrades?)
View 3 Replies View RelatedI just installed Fedora 12 on a laptop. I changed the default shell on the root account to /bin/tcsh and changed the runlevel to 3 and then rebooted. Now I can't login into the root account: it returns me immediately to the login prompt and I can't see any error message (the screen is cleared).Why is this happening?Can I boot into some sort of safe mode so I can undo my changes to the /etc/inittab and /etc/passwd file?I tried booting with a Live CD with the intention of mounting the filesystem and making the changes, but the new filesystem is a LVM and it won't let me mount it (or I don't know how to mount a Logical Volume).
View 3 Replies View RelatedI noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
I just updated my netbook remix 9.10 to 10.04 and every time I boot up it freezes as soon as the login screen pops up. Before this said screen pops up I have the ability to move the cursor around freely, and if I mash the life out of enter I can get it to select my username, but freezes before the password entry bar has the chance to come up under it.
View 1 Replies View Relatedi start up the computer, it loads, it arrives to a screen that says the laptops name, and a bar at the bottum. I can interact with this bar, it is blank and has a picture of a little man with a circle. Clicking on this does nothing, another says shutdown and reset, again clicking on it does nothing. I think the error occured when the computer got unplugged while updating.now before we get into all this GRUB and fancy stuff. I am completely new to linux. I installed this using a cd made from an iso image downloaded from the site. I did not use a windows loader. I don't even have windows anymore. I have all my personal information and data on here and would like it to be restored.I googled it and it says to go to recovery mode using GRUB, don't know how and don't know what grub is.:confus ed:
View 3 Replies View RelatedI just upgraded to 11.04. When I rebooted, everything looked normal. When it asked for my login credentials, it froze. I've tried recovery mode during grub selection, but no luck. I want to try 11.04!
View 4 Replies View RelatedAs the title suggests, I am running Ubuntu inside a VMWare environment. I did the upgrade to narwhal and I see the boot-up screen just fine but when I get to the screen to log in to my Ubuntu account this is where Ubuntu freezes up completely and I get nothing out of it at all. I do have VMWare upgraded to the latest version that is available as well.
View 2 Replies View Relatedwhen I try to startup the xserver in normal mode iget a message "Invalid MIT-MAGIC-COOKIE-1 giving up. xinit: Resource temporaily unavailable (errno 11): unable to connect to X server xinit: No such process (errno 3): Server error."
I dont know what this means except that something does not work.
I use KDE with Compiz and Emerald.I just installed the Enlightenment window manager. The only way I seem to be able to choose it is by logging out of my KDE session and getting to that login screen and choosing from the list....then logging in again.Where do I change the setting so that the login screen comes up every time I boot up?
View 3 Replies View Relatedinstallation opensuse 11.3 and kde 4.4 after update to kde 4.6, work fine, but problem is login screen is low like 640x350...? i wanted to change from lowtion to high 1024x768?when i start opensuse and begin to login was low resolution and log in my user and it's low resolutiona dn i change screen from setting system (kde) after change high display is works fine and rebbot same low resolution for LOGIN MANAGER how i can change it??
View 1 Replies View RelatedI have an odd problem - that I'm having difficulty tracking down the cause!
Since upgrading F12 I have had varying levels of success booting in. Let me explain.
1. Boot
2. Plymouth graphic progresses
3. Freezes at GDM/login screen - Mouse freezes and Keyboard lights flash
4. Hard Reset with pushed in power button
5. Repeat with different kernel - usually the same result (the only exception appears to be 2.6.31.5-127.fc12.i686 kernel - this appears to have a better boot success than the other kernels listed)
In particular the .PAE kernels do not boot AT ALL ( this includes the 6-145 and 6-162 kernels). However the .PAE kernels did work on F11!
ABRT does seem to capture the following kerneloops (url very frequently (yes I do return them to kerneloops)
BUT on reviewing the /var/log/messages file they don't appear to coincide with these boot failures times!
I want to have numlock always on in the log-in screen, but I can't get it to work - I always have to activate it manually. I've tried out System Settings > Keyboard > Numlock > Turn on both as normal user and as root, but it simply doesn't work. I'm using openSuse 11.2 x64 w/ Kde 4.3.4 (updated from 4.3.1 w/ Kde repositories).
View 8 Replies View RelatedI've been running openSUSE 11.2 within a VM using VirtualBox 3.1.2 with Vista x64 as the host OS for quite some time now with good results. Yesterday I went to reboot the VM and VBox made some comment about 3D not working and needing to install the VBox guest additions (which were already installed). After rebooting and seeing the openSUSE splash screen, I now get a solid purplish display with no activity. I've tried running "sax2 -r", re-installing guest additions, running the repair CD, and other things but this problem has not gone away. Aside from reloading the OS, does anyone have ideas on how I might fix this?
View 7 Replies View Relatedi installed opensuse 11.4 on my laptop (Lenovo T60, Mobility Radeon X1400). It worked fine for some weeks, the first problem that I found was that libreoffice did not work. Calc crashed immediately (screen looked "destroyed", only the panel was really visible, but the system seemed to work so I could log out without alt+ctr+del), writer had the problem after opening some menu options. Now (one week later) after start and login I could not see the panels anymore, I could start programs but those would not be displayed, I only saw the desktop. After restarting, I cannot even log in anymore, the screen looks destroyed as with libreoffice. I created a new user, this works and this is from where I write.
View 2 Replies View RelatedI am running opensuse 11.4 on my Lenovo G450. The probem is that the login theme is not changing. Its the same default one. I am sure that I am following the way it should be to assign the new theme but no result. What could it be?
View 9 Replies View RelatedI just moved from openSUSE 11.0 to 11.2.
While I like to new login screen (I was using a face based theme previously), I am stumped on how to control the order that the user names are presented.
As best I can tell, they are presented in the order who logs in most frequently. While that makes a certain amount of sense, I would like to be able to force the list to remain alphabetical.
Is there any way to control this, and if so, where?
