I'm really new to opensuse, and linux in general. I started using 11.2 in may and I'm still having trouble. I started it on a newly refurbished HP Pavillion. It's always seemed to run slow, freezes up when I plug in my external hard drive, won't play music on amarok or it will lag, things like that. When I run it in windows everything works fine. and it has always ran really hot and loud when in opensuse.
To make things worse, lately if I open mozilla, all the programs/windows I have open will disappear, all my tabs will disappear, all the icons on my desktop disappear and my application launcher, clock, etc, all disappear. when i manually shut it down and restart it works fine for a while. I keep trying to find things online but I've got to the point where I'm afraid to mess it up more.
So i just finally installed Debian Jessie OS, replacing Ubuntu. But now it is running extremely slow. It's not internet connection. The internet speed is running fine (Videos load quickly), but it's like the system freezes every 30 seconds or so. A video can be fully loaded but still stops and starts constantly. Just browsing the internet, or non-internet things do the same also. I switched back to Ubuntu to see if it was different on there, but Ubuntu is running fine.
I am having a problem with my Fedora11, I am not sure wether it is software or hardware but this looks serious. My computer is running very slow and freezes up every few seconds. Every time I reboot I would get a kernel failure pop-up.
I was messing around couple linux distros and a desktop earlier today. When I booted from the Ubuntu disk, it seemed to take like 2-5 minutes on each screen. So was basically taking like 10 minutes before I even got to the disk's menu. When i booted the machine off of openSUSE 11.2 disk it booted nice and fast, then installed without a hitch.When i put the Ubuntu disk into my laptop it booted fast and fine there.I'm just curious if anyone has any ideas why that desktop would seem to disagree with a bootable Ubuntu disk like that. Those things are obviously designed to work with near anything. It's a standard IDE CD-ROM, 7600GT, IDE hard drive, all pretty standard stuff.
I've installed Ubuntu 10.10 (was having similar issues in 10.04 too) on his PC and generally it's working just fine. The problem is system tray icons disappears/rearranges automatically but the biggest issue is that NetworkManager applet icon disappears and somehow internet stops working every now and then...Is there any way to "weld" NetworkManager etc icons to the Gnome Panel/taskbar ? so that they can not be removed without entering the password?
More than often, my OpenSUSE 11.3 box completely freezes when surfing the internet with FireFox, forcing me to stop the computer the hard way (pushing the on/off button) and restart itDoes anyone encounter the same issue? Does anyone has a start of a clue to explain me why? Soes anyone could tell me where to start to look for the reason!Note that the last time the problem occues (i.e. 10min ago) was on this site (no other tab opened).My configurationSONY Vaio VPCF11S1E: Core i7 720QM, 6GB RamOpenSUSE 11.3 64bits. I did not install the official NVIDIA driver as it causes the screen fonts to be extremely bigOPenBox-session + tint2FireFox has the adobe flash plugin installed
I have 3 boxes running opensuse-11.4 64 bit - Phenom-I 2.6 GHz, Intel Q9400 quad core 2.66 GHz and Intel SU7300 dual core 1.3 GHz (the last one is a laptop). When I run a KVM virtual machine and load it quite a lot all host OS freeze. Interestingly, the laptop works the longest (hours), while the fastest system with Q9400 freezes in max. 10 minutes. After a hard reboot there is nothing in /var/log/messages This bug is 100% reproducible. The guest OS is either RHEL or openSUSE. Is it a 11.4 bug or I am missing something? Have not tried the same hardware with RHEL-6.
My 10.04 install freezes at about 95%, during running dpkg. I have tried again, always freezes at same point.Live CD version runs fine.Is there a 'command line' install that might help me determine which pkg is causing the problem.I had 9.10 running on the system for the last six months with no problems.
I have a pretty quick machine, quad core 2.66GHz duo processor, nice ASUS motherboard, high speed memory bus and so on. Basically, this is not a machine that's getting "maxed out" by playing some music.Load averages for the 4 processors according to htop are 1.48, 1.25, 0.85. Looking at the System Monitor CPU history I am seeing an average of perhaps 25% load.
However, when I am in a shell, I am getting a second or longer waits between key presses at times.My only guess as to why is that may be is that the streaming audio is on some very high priority so everything else gets put on the back burner. In any case, does anyone have any experience with this and a possible tweak that would give everything else a "fair go" so things didn't seem so unresponsive?
I updated from v11.2. to v11.3.I have 4 workspaces defined. The Gnome panel shows only in the first workspace! When I switch to another one, the panel disappears. As you may imagine, this is rather inconvenient. Once I am in another workspace other than 1, my only option is to reboot since there is no way to navigate anywhere. How do I set up the Gnome panel to show in all workspaces?
I just installed SuSE 11.2 on top of where 11.1 used to be on my hard drive. Acronis Operating System Manager will let me boot into XP Pro but it tells me it cannot find SuSE in the master boot record. If I repair the master boot record in SuSE, XP Pro disappears. What do I do?
After doing a wubi install of 11.04 onto my hp g56-116a because of it having all 4 primary partitions in use, natty seems to be running abnormally slow Not throughout, but there's major slowdowns when doing something like opening a new browser window or similar task.
Sometimes it will just spontaneously log out. The slowdowns are so bad the mouse cursor will become completely unresponsive/laggy for 20-25 seconds. My laptop has 4GB RAM and an intel celeron t3500 cpu, which zips windows 7 along speedily, but its running this install a lot slower than my old laptop ran in,with 2GB RAM and a slightly slower processor.
I've just installed Unison. I created the default profile, selecting one of my subdirectories as the source. That done, the GUI disappeared, although a unison-2.32.52- process remained running. I can start another GUI session and, regardless of if I kill the old process, I can only choose my profile before the GUI disappears again. There is no opportunity to do anything else useful, such as selecting a destination directory.
I just installed ubuntu lucid x64 on an HP dv7-3065dx and even though the installation went pretty smoothly, every time I open cheese or anything else that uses the webcam, the microphone all of a sudden cuts off. It doesn't receive input. However if I use the microphone without camera then the microphone works.... Is the webcam somehow crashing the microphone?? Is there something wrong with pulseaudio? The webcam works great and is recognized as "HP Webcam".
I just wanted to install openSUSE 11.3 64bit. Installation works fine until reboot request. It switches to console, saying that it tries to load without reboot, screen becomes black, i got a cursor with animated wait-symbol and then it freezes. Can't move the mouse, no reaction on keyboard inputs, HDD-led not blinking. If I reset my PC and boot the new installation, it says that an error occurred and asks me to complete the unfinished installation. It starts auto-configuration and freezes again at about 3%. I tried again and some time it did not start the graphical yast but in textmode. The freeze came at the same position, but it posted many lines on console with error messages. I could not scroll, so I saw only parts of it, saying kernel panic and many addresses.
I guessed that it has to do with my chipset and graphics card, it is a nVidia GeForce 9300 chipset (MCP7A) with onboard graphics. It works fine with openSUSE 11.2 64bit by the way, but it was not supported in earlier versions than 11.2. So I tried to install it with proprietary drivers. I started the installation again and added the nVidia repository and a Packman repo and selected the driver which works fine on 11.2. Error was same as above. Next I tried an openSUSE 11.3 32bit Live CD that came with some PC magazine and lay around and it is booting and works fine!
This was confusing to me, so I wanted to try the 64bit version of the live CD. Which was again not booting. It freezes at some part, maybe when it tries to start X. But it also freezes booting with 'nomodeset' (found it somewhere here), in VESA mode and even in textmode! So i guess it's not X what causes the freeze. But it is sometime at the end of booting up, as far as I can say. I would like to use the 64bit version but I don't know where to search for the problem. I checked every checksum before burning, so a broken media should not be the reason
I installed Linux about a week ago, so I'm really new to it. I have been having some problems with it, when I start my laptop sometimes it shows my desktop background but never seems to load all the icons and everything it sits there with the mouse pointer and a the desktop background screen without icons. The second problem is that when I suspend it I can never get the screen to work again not even by moving the mouse or typing anything in.
After logging in, all I get is my desktop background and nothing else. If I logout/in/out/in/out/in I get everything back to normal,icons, menus, toolbar etc.
Gnome desktop on Opensuse 11.2. It's more annoying that a big issue.
I have install the openSUSE 11.2. During install several error messages were shown. "I/O error" and "Error 2". The operating system works normally but icons of files and toolbar buttons are not shown. What should I do?
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow: Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11) Processor: AMD Phenom X3 8450 Memory: 2GB Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers) OpenSUSE 11.4 KDE 4.6.0 Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I installed openSUSE earlier today, I have Windows 7 on this PC too. I installed using all the default option.Installed fine, booted up. Working perfectly. Used it for a few hoursI changed an option to enable the desktop effects (the 3d effects). When I did this the computer froze completely, I had to pull the plug.When I rebooted the computer froze on reboot.I get to the point where it displays the graphical screen, then the screen switches to the brighter green, higher resloution graphical screen. I get the white progress bar under the chameleon. It gets to half way. Then the mouse cursor becomes quite flickery and slow, and it doesn't progress any further. Again to reboot I have to pull the plug. (Although interestingly the contrast buttons (F4/F5 on my laptop still work).Steps I have taken.I have repeated the install, does exaclty the same thing.
I have downloaded the 32 bit version (I originally installed the 64 bit) and again resinstalled - does exactly the same thing)I have hit escape so I could see the not graphical boot screen, unfortunately it get past that, goes to the graphic screen/progress bar and then hangs at the same place.The LiveCD (running from the CD still works fine)I really dont know what to try. If nothing else could you tell me the quickest way to remove it, delete the grup bootloader and recover the space it took from my partitions.
my girlfriend has a netbook(acer A0751h-1401) and always complains how slow it is on vista and how much it freezes up, so i put ubuntu netbook remix on it. The video qaulity is so slow i give up and install xubuntu thinking it will be better since it is for slower computers, wrong. So im thinking it is a video driver issue or something. it has the intel gma 500 in it but it is only allowed to use 8mb of memory for video and i cant change it in the bios. I mean it shouldnt have all the lag on xubntu that it does
Does anyone know how to revert network speeds to those attained with openSUSE11.2-64? On openSUSE11.2-64 the reported network download speed was,
max : 420 kB/s ave : ~ 200 kB/s
After upgrade to openSUSE 11.3-64 the figures dropped to about 25% of the previous values. After upgrade to KDE 4.5 and plasmoid-networkmanagement the initial values did not change but the average value dropped after about 30 seconds to ~ 15 kB/s. Approach so far:
1. The motherboard's (A780GM-LE) build in LAN (Realtek RLT8111DL) was originally detected by openSUSE 11.3 as the Realtek RLT8169 and kernel module r8169 installed. This was replaced by the latest module r8168-8.019.00 from Realtek.
2. After kernel update to Linux 2.6.34.4-0.1-desktop x86_64 the plasmoid-networkmanagement was replace by NetworkManager-kde4. This improved flow with,
I upgraded my Dell 2.53G machine from 10.3 to 11.2 (KDE desktop). Everything seemed fine for the first day. Then the whole desktop froze. No screen update, no keyboard, and, though you could see the mouse move, clicking didn't do anything. The only way out was to pull the plug.
After multiple attempts at fixing it failed, I repartitioned the disk and tried a "clean install". Everything worked for about 2 hours. The system is currently frozen. The harddrive is quiet. The only "3rd party app" was Adobe Flash, pulled from the Non-OSS repository.
i have running more than 50 servers with openSUSE 11.2 for a long time without any problems. After upgrading 30 server to 11.3 some of them are freeezing after one or two days. I can ping, but i cannot log in. At the console i can type in the user and the nothing happens, system has to reboot.
All servers are Hewlett Packard Proliant G4,G5,G6 with 32bit and 64bit. No errors or hints in the systemlog.
I love opensuse as it's much snappier than MINT. But my system 11.3 is freezing while booting. I pressed ESC during splash and can see messages on the screen. The last message is ATA3 Exception EMASK. I have uploaded the /var/boot.msg here klogd 1.4.1, log source = ksys - Suse Freeze - CuQAd3dg - Pastebin. There are no other log files!
