While communicating with cpanel , they said they don't support on any NAT router based network. To host website with cpanel internet should be connected directly with modem (no router) I have a dell poweredge server and recently brought PCI modem. I have 8 IP static addresses from my ISP. cpanel as they said that they don't support networking.
View 3 RepliesI want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View RelatedPl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View RelatedDue to PCI limitations on our server, we are trying to connect a Trandnet TDM=C400 ADSL modem via USB but are not having any luck, as the modem appears not to be recognised.
View 8 Replies View RelatedI have an ADSL Internet connection with static IP.I connected through PPPOE from my modem to my ISP.I need to ssh from outside of my home to my home, But i don't know to use which connection between my computer and my modem.(dhcp ,static , bridge or ....)
View 1 Replies View RelatedI want to get an adsl 1 internal pci modem card for my home server. Netcomm's NB100 seems to be the most readily available. Does anyone know if there are ubuntu drivers for it? If not can you suggest a card that does and is easy to get a hold of?
View 2 Replies View Relatednot *buntu related but what is the difference between an adsl router and an ethernet modem?
View 5 Replies View RelatedWhat are the pros and cons of various current model ADSL modem routers for use with DD-WRT, OpenWRT or Tomato? There are, of course, hardware compatibility lists (HCLs) for each of these (DD-WRT, OpenWRT and Tomato) but many of the models are no longer available and there are so many that researching them all would be onerous. Many pages on the Internet recommend the WRTG54L and that would be great but it is no longer an option except second user which is increasingly difficult. What are the pros and cons of the various chipsets: ADM5120, AR7, IXP4xx and BCM63xx?
View 4 Replies View RelatedI am currently running a network with a file server that runs Ubuntu 10.04 Desktop at the moment. DHCP and samba are setup on it for now. Has multiple network cards but we only use the gigabit interface. Here's what I want to do in the near future. I want to provide internet access to the network via ADSL (no better option currently) So what i'll have is one or more ADSL lines and their corresponding modems (most likely D-link ones as they are cheap). As i understand it the server will be doing the job of a router. anyway, point wise here's what i want to be able to do:
1. Have ability to increase capacity/bandwidth with more ADSL line & modem combinations
2. Have user accounts (probably web based setup or any other option) for internet access so that they can be billed per GB.
3. Still be able to share files that are on the local network using local DHCP if possible.
So to an existing network that has files i want to add internet access capability. but users will have to log on so that their usage can be monitored. I have been searching around but maybe the search terms are wrong for what i need accomplished. i don't mind upgrading the ubuntu version to the server edition so long as i can use X11 forwarding atleast so that i can do remote monitoring. VNC is too slow, and using nautilus forwarded via X11 to my desktop sorts out most of my needs. The network provide has suggested maybe using pppoe but i am thinking if there was a welcome page based authentication system then it'd be more easy to monitor?
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies View RelatedI use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
i m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not
View 14 Replies View RelatedI have two servers, both running CentOS, but one running Cpanel as the control panel and the other running Webmin.
I would like to sync the web folders using rsync. However, when I sync the files from the Cpanel host the permissions look as follows:
Code:
But that doesn't work on the Webmin server which needs the following:
Code:
It seems the Cpanel install has the group as 'nobody' whilst webmin has it the same as the file owner. I can fix this by running:
Code:
But as the file transfers will be frequent, I don't want the files to be inaccessible until chown is run.
So, what I really want to know is - how can I change things on the 'webmin' server so that files with ownership owner:nobody will run?
i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies View RelatedMy router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies View RelatedFresh install of FC11. Had to install libwvstreams-4.5.1-5.fc11.i586.rpm and wvdial-1.60-8.fc11.i586.rpm
Now get following error -
how to configure Huawei 3G modem (ec325) in ubuntu 10.04, even i tried with gnome-ppp / wvdial which unable to connect, shows "ppp deamon died" and disconnected at the end of dial.
View 3 Replies View RelatedI have started using ubuntu 11.04 desktop edition recently. And sadly i dont have an internet connection. I have an USB modem of Huawei. But I cant configure that in ubuntu. Im from india and using Reliance Netconnect 1x EC121 modem. Can anybody please tell me how to configure this modem so that I can connect to the internet? Due to lack of internet connection im not being able to download any updates or codecs. I have started using Ubuntu only 2 days ago..
View 1 Replies View RelatedI have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies View RelatedHow would I configure my box to connect to a modem in bridge mode?
I have a server at home that im migrating over to be the default-gateway/router. I have everything else setup (dns,dhcp etc) now just need the ppoe part, or so i beleive?
I have two interfaces. eth0 (lan) and eth1 ready to connect to the modem.
The modem is in bridge mode ready to go.
What is my next step? Are there any good guides, I didn't find any.
Im trying to make a webserver at home. I have a static IP Address of my ISP (o2) I have built a server ( 2.8 p4HT, 2GB Ram, 500GB HDD) Just to test... But, i dont know what to do in the IP Address settings for the IPv4 ( I think thats what it is) Do i put my static IP address in my ISP gave me, or the local IP of the server ( Wich is 192.168.1.72) Im realy confused. Ive tried everything i can think of, Reinstalled the os about 40 times up to now...
View 1 Replies View RelatedI just installed Lucid Lynx Ubuntu on my computer. I love it, but I do not see how to configure my dial-up modem and connect. I'm hoping it's still possible. Here's my hardware.
333mHz Pentium III
Lucid Lynx 10.04 LTS
US-Robotics 56K Faxmodem External
256mb RAM
ISP OmniLEC
I have been using an ethernet ADSL Westell modem for years and would like to upgrade to a newish Allied Telesyn USB Modem AT-AR206 in Fedora Core 10. The modem power goes on when plugged into my pc and lsusb shows that it has been recognized with this:
Bus 002 Device 003: ID 1110:9022 Analog Devices Canada, Ltd (Allied Telesyn) ADSL Loader
I used system-config-network but don't have the option of adding this new hardware.
How do I configure my network to use my DSL line?
I'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
View 4 Replies View RelatedI installed Cent OS 5 in my computer system. I use GPRS modem for browsing the net. I use my cell phone as a modem. The problem is that when I connect the phone modem to the system the computer gets turn off. And it does not start again until I disconnect the usb cable of the phone.how to use a GPRS modem in Cent OS 5?
View 2 Replies View RelatedThis is my first post on forums.i am using centos 5.5 on my pc. i want to use internet on my using my cellphone as modem.internet is running successfuly on my handset.i have got a usb cable to connect it with pc.details are given below:-
1.cellphone= samsung c3200(gprs,edge,3g supporting)
2.connection method= usb cable
3.os= centos 5.5
I am trying to connect my Asus EEEPC to an option icon 431 usb modem.
I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5
Here's some info up front code...
I have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
I am brand new to this forum! I have spent some time on other Linux forums but based on my usage of CentOS I figured that it would be best to come straight to the pros. I've been using CentOS for a while now, mostly as a web server. Actually I use it as the base and installed Parallels Plesk Control Panel.
Anyway I want to setup a VPN and so far I haven't found any real solid documentation on how to do that! Yes I could install DAG/RPM Forge but what I really want to know how to do it from scratch. What I mean by scratch is that I want to download the tar.gz package from openvpn.net and then build it as required. I don't know much about building or compiling a package so that is why I have come here for help! I am guessing that I need to compile openVPN with openSSL and probably a few other packages... I could use openSWAN but I don't want to.