Trying to install on a: Dell Precision T3500 OpenSuse 11.3 keeps showing the following message:
"Make sure CD number 1 is in your drive"
I ordered the DVD from the OpenSuse site, so they ARE NOT burned copies. I also tried burning images, the same problem happens. No matter what I do, it does not go beyond this message.
I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedI tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
pm-hibernate and pm-suspend only work the first time after booting into runlevel 5. This behavior is reproducable. pm-hibernate starts out correctly but then hangs the system bevore it gets to save the image from memory to disk. The computer locks up and does not power down.
pm-suspend: on wake up there is no signal on the screen (pm-suspend called from X environment or text terminal shows same result). I spent some time reading information on s2ram s2disk and added the follwing options:
S2RAM_OPTS="-f" in
/etc/pm/config.d/00meine.config
(display adapter is GForce4 nvidia with the closed source nvidia driver for accel)
splash = n in
/etc/suspend.conf - to get some more information during the suspend / hibernate.
Any ideas to get pm-hibernate / pm-suspend to work more than one time after boot??? Hibernate would be a great start for daily work and for energy saving.
horstausdemwald PS: In runlevel 3 pm-hibernate works various times from a text terminal. Under the same condition pm-suspend leads to a scrambled text terminal after resuming (some help on this: using vga=normal in Grub). The computer continues to work - though without visual aid - when the text terminal is scarambled. For example Runlevel 5 can be called blindly from the text terminal.
Whenever I try to use a preload ISO from susestudio.com, it takes me about 5 tries to actually get it to install. I load it up in VirtualBox, and on the screen that warns "you are about to erase all data on /dev/sda, continue?", selecting "yes" will 80% of the time cause it to think you cancelled and waits 30 seconds before rebooting. Every now and then it decides to work, but sadly that's the exception and not the rule. If it makes any difference, the appliance I'm downloading is a custom one based on openSUSE 11.4 Minimal X with GNOME 3 installed on top of it.
View 1 Replies View RelatedWhen I click download DVD 4.7 GB, on any browser (I tried in Firefox, Opera and Chrome) It started to download 4.3 GB instead of 4.7- The first Download was 4.2 GB and I though that was wright, but the checksum didn't match. Now It started download only 4.3 GB Why is that? How can I solve this ?
View 9 Replies View Relatedis their a wubi like installer so i can try open suse without partitions?
View 5 Replies View RelatedI have tried liveCD, but open suse is running so slowly. Will it be faster when I install it?
View 8 Replies View Relatedcan someone explain to me in which platform should we install the open suse iso image.. n how to do snort inside it.. i'm dying to know..
View 2 Replies View RelatedMy question to the community is should I preform a fresh install of OpenSuSe 11.2 or upgrade my current version of OpenSuSe 11.1? As of current I just use my system to surf the web check, email and Basic Business needs. The specs of my Laptop are:
OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.1 (i586)
KDE: 3.5.9 "release 49.1"
[Code]...
can someone direct me how to install Ubuntu as a dual boot on my open suse 11.2 I could not find any installing instructions. if someone could give me a link or direct me ,
View 5 Replies View Relatedi have openSUSE 11.1 kde 3.5
I am wondering if there is a way that i can force all windows ( konuquor ) to open the same way every time such as detailed tree view
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
The hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
View 1 Replies View RelatedWhy does unix ps -l whows one number in column "PRI" but in same time ps -o pri shows another number? cpu and nice are zero for those processes
View 1 Replies View RelatedFirst off i know that suse linux cant be infected by window based viruses and that as a whole reactive based technology such as anti virus wont be that effective as it is always dependent on the virus spreading first-but is there a way to have a real time antivirus scanner under linux? It would be nice to know if i file i opened had a nasty virus in it like the way it does in windows. I first came to think of this since the new opera browser has built in protection from avg. Ive tried opera but still prefer firefox with all the addons like noscript and adblockplus etc.
View 3 Replies View RelatedWe are very new to linux.would you plz give me the installation procedure of ns2 in open suse..I have tried some procedure found in linux forums.The following problems arises
1.yum command not found in step 1.
2.on skipping step 1 ,i tried step 2 where on ./install command it gives.
There is no prompt for choosing whether I boot windows or Linux it just takes me to Linux. I need to install and load some things from windows and can't figure it out.
View 1 Replies View RelatedI need to set up a domain controller that can communicate with windows machines as well as be accessable by the domain name and allow me to log in to the domain from my windows machines. i do have the novells guide to compTIA linux+ book but i cant figure out what i need to do to set up this server in the way i described above.
View 4 Replies View RelatedThere is no pkgconfig file, so "configure" and "make" commands does not find all the time automatically needed files even they exist.
View 9 Replies View RelatedI've installed openSUSE 11.1 in my desktop with default firefox as web browser. Whenever surfing graphical sites Its says flash need to be installed and in the Adobe site which package I've to download? (Yat or tar.gz or rpm, etc.. etc..) and how I can install it.
View 2 Replies View RelatedHow do I install an HP Photosmart C4780 wireless printer in open SUSE
View 1 Replies View RelatedOK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies View RelatedI will open firefox then scroll to file-quit firefox, firefox closes fine but when i want to open firefox again it wont, i have to restrate opensuse 11.4 linux 2.6.37.6-0.7 kde 4.6.0.0.
View 3 Replies View RelatedI'm trying to install a GeForce 8600 XT card into novell Open Enterprise SUSE 11 so that I can get the 3D Cube to work. It currently does not work with the default nvidia card onthe motherboard.I can not find the correct driver for the GeForce 8600XT card. Can someone identify the driver I should be using please? Then if someone could also direct me to the "How to install a Video Driver" tutorial,
UPDATE:I've downloaded the correct drivers but it still says that my hardware does not support Desktop enhancements etc ... I think the GeForce 8600 XT just doesn't support 3D accelleration ... period.Can someone suggest a reasonably priced video card that is easy to install and which supports 3D Accelleration please?
Was just wondering if there was a way to disable the password prompts that pop open every time I try to install something. Is there a way to do that?
View 3 Replies View RelatedI just tried booting SUSE 11.0, but the system stops at the point it shows "initializing random number generator". I have left the system running at that point for almost 2 hrs, with no way to get past that. System isn't locked up. It has never done this before. How do I fix this?I have also tried failsafe booting, but it stops at the same spot also.
View 3 Replies View RelatedJust noticed this, when I am logged into OpenSuse 11.3 under my default user (autologin) I have 3 of the same user logged in, eg when I run top it shows 3 users and when I run the users command it shows the same user 3 times. Is there any reason for this? Do I need to investigate this at all?
View 1 Replies View Related
