OpenSUSE :: SUSE Studio Preload ISO Refuses To Install (most Of The Time)?
Jul 18, 2011
Whenever I try to use a preload ISO from susestudio.com, it takes me about 5 tries to actually get it to install. I load it up in VirtualBox, and on the screen that warns "you are about to erase all data on /dev/sda, continue?", selecting "yes" will 80% of the time cause it to think you cancelled and waits 30 seconds before rebooting. Every now and then it decides to work, but sadly that's the exception and not the rule. If it makes any difference, the appliance I'm downloading is a custom one based on openSUSE 11.4 Minimal X with GNOME 3 installed on top of it.
View 1 Replies
ADVERTISEMENT
Dec 28, 2009
i have use SUSE studio to create a live CD image that is an .ISO.
How can i boot that from a flash drive because when i select to boot from flash drive it says there is no boot-able partition.
View 2 Replies
View Related
Jan 31, 2011
I have been looking all over the internet for it can not find it . The link posted at [URL] SDB:Live_USB_..._way_.28GUI.29 does not work.
View 9 Replies
View Related
Aug 12, 2011
After something happened in SUSE Studio, in any appliances I build the owner of /home/tux/Desktop is root which makes impossible to create desktop icons. This happens even in those appliances which previously were build normally with normal ownership (i.e. tux as owner of /home/tux/Desktop). Something changed abruptly and in all these appliances the ownership of this folder changed.
View 1 Replies
View Related
Dec 2, 2010
If you can access Suse Studio here is thlink to the buildLFS Host - SUSE GalleryGoogle hasn't been friendly and neither has a search on these forums, I don't know which man to read so a finger in the right dirrection (preferably not the middle) would be nice as far as that goesRight now the yast live installer trips up at %84 while saving the boot loader configuration and displays a popup that says �An error occurred during initrd creation. /sbin/mkinitrd: illegal optionI then press enter to acknowledge the message and the installation continues without a hitch.
When I go to boot up (no other os installed) grub says it cant find the file initrd-2.6.34.7-0.5-defaultIf you boot the live cd again you can mount the boot partition and you�ll find a broken symlink called initrd that islooking for the missing file above.Like I said above, if it an obvious fix, all I need is some direction, I don't mind reading. (been doing that all day)If you need more specifics Id be happy to supply, I'm just not sure whats relevant and don't want to bloat the post.
View 1 Replies
View Related
Sep 7, 2010
I have just installed opensuse 11.3 on my box and it refuses to shut down. It shows a tty screen with the message "power down" but wont power off. After searching the web I found no solution until I compared the "halt" scripts of versions 11.3 and 11.2 (they are located in /etc/init.d). Both scripts differ only by a couple of lines that make reference to raid devices. As I am not using any RAID array in my BIOS, I copied my halt script (version 11.2) on top of the version 11.3 halt script and my box started to shut down and power off nicely! At least for me it worked!
View 28 Replies
View Related
Jan 30, 2011
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
View 3 Replies
View Related
Dec 7, 2010
Trying to install on a: Dell Precision T3500 OpenSuse 11.3 keeps showing the following message:
"Make sure CD number 1 is in your drive"
I ordered the DVD from the OpenSuse site, so they ARE NOT burned copies. I also tried burning images, the same problem happens. No matter what I do, it does not go beyond this message.
View 9 Replies
View Related
Apr 13, 2011
pm-hibernate and pm-suspend only work the first time after booting into runlevel 5. This behavior is reproducable. pm-hibernate starts out correctly but then hangs the system bevore it gets to save the image from memory to disk. The computer locks up and does not power down.
pm-suspend: on wake up there is no signal on the screen (pm-suspend called from X environment or text terminal shows same result). I spent some time reading information on s2ram s2disk and added the follwing options:
S2RAM_OPTS="-f" in
/etc/pm/config.d/00meine.config
(display adapter is GForce4 nvidia with the closed source nvidia driver for accel)
splash = n in
/etc/suspend.conf - to get some more information during the suspend / hibernate.
Any ideas to get pm-hibernate / pm-suspend to work more than one time after boot??? Hibernate would be a great start for daily work and for energy saving.
horstausdemwald PS: In runlevel 3 pm-hibernate works various times from a text terminal. Under the same condition pm-suspend leads to a scrambled text terminal after resuming (some help on this: using vga=normal in Grub). The computer continues to work - though without visual aid - when the text terminal is scarambled. For example Runlevel 5 can be called blindly from the text terminal.
View 8 Replies
View Related
Apr 18, 2010
Is there a way to disable preload for a given process and/or a set of files? I'm having an issue with MLDonkey, which I configured to run as a service. Apparently, preload is trying to pre-load the temporary files lying under MLDonkey working directory (which are huge), and tis is causing a massive slowdown when booting
View 9 Replies
View Related
May 10, 2011
For a number of openSUSE releases now, on a periodic basis (monthly, it seems?) both my laptop and my desktop take forever to start. During this time, the hard disk activity is going berserk. When inspecting this with "iotop", a process called "preload" or "start_preload" is hammering the disk, sometimes up to 10 minutes.
The irony is when you research "preload", you find mostly articles like "drastically speed up your Linux system with preload"- I sometimes think it has to do with running VMs on these machines and maybe it's trying to cache those large disk images? Pure speculation, but I can't seem to find any documentation on this.
Anyway, I did finally find a way to turn this thing off. WARNING: since I do not know exactly what preload does and whether your machine becomes unusable if you turn it off, please only follow these instructions at your own risk. Since preload seems to be a very low-level system/service, I did not want to risk uninstalling it. What I did instead was:
Yast2 - System Services (RunLevel)
Click the Expert Mode radio button
Scroll down to the boot.startpreload entry
[code].....
Since I applied these steps, no long boot times with insane hard disk activity has occurred and I also have not noticed anything else complaining or not working with this service off.
View 9 Replies
View Related
Jan 8, 2010
i got intel inside. when grabbing windows and moving them around they "streaked "(right word ?) over the monitor. Desktop-experience was simply "sluggish". I searched for all kind of info on this board. e.g.: installed preload, intel-microcode, set Xwrapperconfig to -1; -5, -10. tried some changes with swappines and cache_pressure in sysctl.conf. without knowing what it might be good for i ran prelink -a. For about a week it simply rocks: all is "sharp" and clean, including the move of windows. How come? does preload take such a long time ( a few months) to give such an amazing result? Is it related to graphics at all? I upgraded to ext4 bout 4 weeks ago (which takes a while too, from what i have read). intel-microcode doing magic? With the money i got chances are high that the pc`s i buy are intel-inside ones. and with a build-in graphics-card
View 14 Replies
View Related
May 25, 2011
I finished making a custom build OS of openSUSE 11.4 using suse studio but when I tried running the LIVE DVD in a laptop with an ATi Mobility Radeon HD 4250, I got a black screen. Everything from the word go seemed fine showing everything from the loading Kernel message, but the screen that is supposed to show the user accounts is surprisingly absent and only a black screen in its place.
I have only seen this problem with ATi graphics, Intel graphics work just fine. I haven't tested it on a laptop with nvidia. I'm using the default openSUSE 11.4 Kernel (Kernel-Desktop 2.6.37.6-0.5.1), Xorg-X11-driver-video-radeonhd 1.3.0_20100512_80ba041-2.1, Mesa 7.10.2-7.3.1, Xorg-X11 7.6-43.44.1. I have listed these few packages contained in the build, but I'm not sure where to look or what I may be missing.
View 4 Replies
View Related
Nov 23, 2009
I've built my own kernel and now boot.preload complains about the missing preloadtrace.ko kernel module.
Where can one find the source for this module?
View 1 Replies
View Related
Feb 20, 2010
I have not used Linux in some time (I used to use it back when suse 8 was still out and mandrake linux was still around).
Recently I decided to give it another go and downloaded both the LiveCD and the DVD (both 64-bit versions AND 32-bit versions).
I have a Dell Studio 1747 Laptop (with the 17.3 screen). It has an Intel i7 1.6GB processor, 4GB ram and an ATI Radeon 4650.
My problem is that the LiveCD just will not work. It gets to its boot menu, but when I press enter on the boot KDE live CD option, it will either try to boot and then freeze, or it will boot, you will hear that startup music, but the display will go blank. Could it be that it cannot handle my display or the graphics card on the laptop?
Unfortunately I have Windows 7, which doesn't seem to be supported by the windows installer on the DVD, so I can't test if it would work that way.
I must admit that ubuntu has given me the same grief, and so I wonder if maybe the laptop isn't yet supported properly by linux yet?
how I could use a live system or something, to at least try linux for a few things (I would need to retain windows for games and stuff). I'm not into resizing partitions and things, so I would prefer something else that could work.
View 9 Replies
View Related
Jul 5, 2010
First off i know that suse linux cant be infected by window based viruses and that as a whole reactive based technology such as anti virus wont be that effective as it is always dependent on the virus spreading first-but is there a way to have a real time antivirus scanner under linux? It would be nice to know if i file i opened had a nasty virus in it like the way it does in windows. I first came to think of this since the new opera browser has built in protection from avg. Ive tried opera but still prefer firefox with all the addons like noscript and adblockplus etc.
View 3 Replies
View Related
Jun 24, 2011
I'm trying to make my USB bootable with the OpenSUSE 11.4 64 bit KDE iso image. When I open up SUSE Studio Image Writer (by following the Windows instructions here), it doesn't find the .iso image on my desktop. When I'm selecting the image, it's looking for a .raw file. Do I have to do some trickery to change the .iso image to a .raw?
View 3 Replies
View Related
Dec 18, 2009
openSuse v11.1
Linux 2.6.27.39-0.2-default x86_64
VirtualBox v3.1.0
One user account completely ignores all keyboard input. No other account demonstrates this bizarre behavior. The faulty account has had occasional keyboard difficulty but it has always been related to the Virtual Machines (VirtualBox); the hosting account always functioned correctly.
Then the ban on keyboard input. Poof! "Keyboard? What keyboard? I don't see no stinking keyboard!"
It is not the physical keyboard. Three different hardware exhibit the same fault. It is not the motherboard; two mb's show the same fault. It is only that one account. And I even took the Windows route of re-installing the OS (what a waste of time that was).
If something changed, I am not aware of it (although something must have).
View 9 Replies
View Related
Jul 29, 2011
My Dell Studio 1735 laptop fails to install openSUSE 11.4 install from DVD. The installation tells me it failed to install "kernel.desktop" then grub only has a Floppy entry. When I boot to Recover System /boot has no initrd or kernels.
View 5 Replies
View Related
Jun 12, 2011
I've found the following irritating problem with the default update applet in 11.4 (the one available in 'Software Management' in the KDE system settings):
Applet prompts to update the system, click Apply updates
Accept licence agreement for flash player update
The applet goes back to listing the available updates - ie. it doesn't run the update The workaround is to untick the flash player update, run the other updates and then do the flash player update by itself.
View 9 Replies
View Related
Jul 6, 2010
I was trying to install openSUSE 11.2 on Dell XPS Studio, model PP35L, but loading kernel hangs at 94%, I tried F5 for Safe Settings, No APIC, No Local ACPI, Check Installation Media, but it still hangs at 94%. Installation works fine on older computer. Is it because openSuse kernel doesn't recognize the i5 Core processor yet? If this is caused by a driver, is there a way to display the kernel messages and what would be the kernel boot options to disable loading of that driver?
View 2 Replies
View Related
Dec 20, 2009
This is not strictly a Linux question, although I am interested in any Linux cautions as to what to avoid that could impact my Linux on the computer in question. I have Linux (openSUSE-11.1) setup on dual boot with MS-Vista on a Dell Studio 1537 laptop. My wife is "fed up" with Vista, and has asked that I replace Vista with WinXP on this Laptop. I would like to do this over the Christmas holiday break. The laptop's 1 year support warrantee has expired. can someone explain to me the function of the two Dell /dev/sda1 and /dev/sda2 partitions ?
This laptop was purchased with MS Vista installed, with 3 primary partitions (small /dev/sda1 (called "Dell Utility" ),10GB /dev/sda2 (unknown - appears to be some sort of Dell backup/recovery partition ? ), /dev/sda3 (MS Vista which had the remainder of the 250GB drive, although I have subsequently reduced this to 69GB ).
Again, I note /dev/sda3 is the 69GB MS Vista partition (I reduced it to 69GB when I installed Linux (openSUSE-11.1)). I also believe it may be in /dev/sda3 where I should plan on installing winXP. Currently I have openSUSE-11.1 Linux in /dev/sda4 (divided into extended partitions, with /dev/sda5 (swap), /dev/sda6 (root), and /dev/sda7 (/home) for Linux and it works well. I plan to keep openSUSE-11.1 Linux when Vista is replaced by WinXP Can I remove and merge /dev/sda1, /dev/sda2, and /dev/sda3 and replace them with one partition for WinXP ?
Or am I better OFF keeping /sdev/sda1 (Dell Utility) ? and am I better off to keep /dev/sda2 (some sort of Vista ?? recovery) ? and only put winXP on /dev/sda3 ? Aside from the MBR with Grub being destroyed (when I replace Vista with winXP) is there anything else I need to be careful of wrt keeping my openSUSE-11.1 Linux install on this laptop ?
I've also sent a slightly different version of this post as a question to the Dell Support mailing list. p.s. for information, here is some output from Linux commands showing the contents:
[Code]....
View 2 Replies
View Related
Jan 9, 2011
I'm currently using Ubuntu Studio Lucid and would like to use Ubuntu Studio Maverick, but I'm unsure how to go about the upgrade. Should I upgrade to generic ubuntu maverick then upgrade to ubuntu studio? Or install ubuntu studio maverick from a DVD?? Or something else?? I should say that I have a separate /home partition.
[Edited because what I first wrote was confusing:] when I started the process of upgrading with Update Manager it said that quite a lot of things would be removed (it would be upgrading only to generic Ubuntu for one thing)---I aborted that by the way. I was wondering if anybody knew of a way to avoid having to first sort of note everything that I have installed, then do the upgrade to generic Ubuntu, then do an upgrade to Ubuntu Studio, then reinstall all of the apps in their newer versions. Might there be a way to upgrade the OS itself first and then just directly update the apps without having to reinstall them, figuring out what to install all over again too?
View 3 Replies
View Related
Mar 6, 2011
I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies
View Related
Jun 14, 2011
I was working with timezones when I came across a very strange error. Date command showed Invalid date/time when I set the date/time to 27 Mar 2011, 02:00:00. On further analysis, I observed that the time was jumping to 03:00:00 after 01:59:59 when the date is 27th Mar, 2011.
View 3 Replies
View Related
Nov 23, 2010
I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies
View Related
Apr 18, 2010
i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
View 6 Replies
View Related
Sep 11, 2010
I have installed Suse on my Windows Vista 64bit machine a couple of times, but the last time I did it - after a disk change - presented some unanticipated problems. Prior to install, Windows Disk Management (whose output I was unable to paste into this question) showed that my disks were laid out as follows:
[Code].....
Disk 0 is a Seagate ATA drive, while Disk 1 is a Western Digital Ext HDD Usb Device. Looking back, I think I should have carved out a partition after M before installing Suse, but I was uncertain whether to make it a logical one or a primary, and in the past the installation has taken the 25 or so gig it needed from the last defined partition on disk 0. This time, however, it went after disk 1, and reformatted the entire drive, deleting about 300 gig of user data, including my system backup. What really suprised me is that it took up the entire drive: 2 gig for the swapfile, then a 20 gig partition, and all the rest for the third partition.
This is not what I would have expected. I especially would not have expected the installation to re-format user data. In any case, I did not want Suse on disk 1, so I reformatted the drive and then used my Partition Manager to rebuild the boot Mbr. So now, I am able to boot into windows, do not have Suse on my machine, but have lost critical data. My disks are now back to the way they were when I started (see above), except that drive F is now all free space, except for my latest backup. My question is how do I ensure, when I reinstall Suse, that it will choose disk0 for the installation and will not overlay any of the data that I have on that drive.
View 8 Replies
View Related
Oct 22, 2010
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies
View Related
May 23, 2010
I have just downloaded a mirror copy of SUse 11.2 and formatted my hard drive, so i can install the linux OP. But it seems like that it is not readable or better to say the boot from CD-rom does not work! Am i on the right track here? How do i go by installing a Linux on a fresh hard drive?
View 2 Replies
View Related
