OpenSUSE Install :: Removing Windows 7 Keeping 11.3?
Sep 4, 2010
I just got it all set up and it has everything I need for what i do on my computer and it does alot better and smoother. So now im convinced linux KDE is where the party is at! HAaha so I want to remove windows 7 from my notebook and have openSUSE as the only OS running on it. Can anybody help me with removing windows 7 and leaving openSUSE on it? I was also hopeing that i'll be able to use the disk space with opensuse that my windows 7 is currently useing.
I use to have windows and opensuse 11.4 with dual booting with no issues at all I have installed ubuntu and now I want to get rid of it, but the boot and grub are from the ubutnu Is there any way to do a clean uninstall and do not loose the dual boot I had before?
I used to keep a back level kernel on all my systems along with the latest upgraded kernel. How is that done using Yast/zypper? I don't see an option to keep the older version.
I managed a first installation of SUZE 11.2 from a mag distro - downloaded the iso file - burned the dvd, installed again, looking to retain the host name for this computer. But for the second time I get a linuxXXXXX sort of host name! No chance to set my preferred one up. I like what I've seen of SUZE so far and am happy to move to it sort of permanently. This legacy hostname helps me keep sane in networking matters though and I have yet to configure a networked laserprinter and add another computer. Can I re-set the hostname to my selection without harming the whole set-up?
I'm upgrading to 11.3 (from 11.2) and will be keeping my current home partition. Will this keep my browser favorites? Also, I read somewhere that in order for things to work properly after upgrading (without reformatting my /home partition) that I would have to keep the same username AND user UID...? Is that true? How do I make sure I have the same UID if so...?
I purposely set up a seperate home partition so that when I changed distro's or upgraded I would still have my files, and some settings intact. (I switched distros a lot when I first started using Linux.) I set up a "bin" folder (in home folder) that had a couple of programs I had downloaded to keep from having to set up and configure everything all over again every time I felt like changing distro's as well.
I have a dual boot windows XP/OpenSuse 11.3 system running from a hard drive. They are both 32 bit in spite of the fact that the system can run 64 bit.
I would like to upgrade to Windows 7 64 bit (the wife insists, not yet a Linux possibility) and OpenSuse 11.4 64 bit, but having the programme files on an SSD for faster loading, with my data files on the existing hard drive.
I'm happy with the notion of getting the SSD going as a dual boot system. With Windows, as I understand it, it can tell it fairly easily where to look for the "my documents" folder on the hard drive.
However, the Home directory in Linux is not quite the same. How (if it's possible) could I run the SSD but use my existing Home directory on the hard drive?
my Windows partition and the future Suse partition will be on different HDDs, so this should ease things a bit. Suse is on HDD 2 and Windows on HDD 1 HDD 2 will be the default Master drive, so I want GRUB to give me to option to boot either on Suse, either on Windows 7 I want to keep Windows 7 boot manager intact. I.E. If I switch HDD 1 to the Master drive, it will boot directly into Win 7.
What I wanted to do is:
Unplugg Windows drive Install Suse Replugg Windows drive and manually add the entry to GRUB
if I keep them both plugged, Linux will not touch HDD 1 MBR?
Having read several threads and received excellent previous advice there are just a couple of points I want to check please before proceeding on laptop. I want to upgrade to 11.4 from 11.2. My disk setup is as follows:-
Disk /dev/sda: 120.0 GB, 120034123776 bytes 240 heads, 63 sectors/track, 15505 cylinders Units = cylinders of 15120 * 512 = 7741440 bytes Disk identifier: 0x462d462c
[Code]..
If I select existing /home root and swap partitions, format root but prevent formatting of /home and use a different user ID I believe that will leave my existing data intact and will allow me to trial new os. Is this correct approach? If all goes well and when I have new system working correctly, what is best way make old user id date accessible. Can I simply create my old id on new system and will that allow me to access data when I log on with that id?
Second question; at present I have the ability to boot to openSUSE, OS/2 and windoze. (It used to be done entirely by Boot Manager but during my last Linux installation I messed this up a bit so now machine boots to grub and this offers all three operating systems but chain loads Boot Manager if I select OS/2)
When I do the new installation what should I select to retain this setup so that I still have access to windoze and OS/2 but when selecting linux have new 11.4 system run.
when it comes to Linux with little to no understanding of the command lines and what they mean.
Issue:I currently have a dual boot Windows 7 PC (Toshiba Satellite A100-756 with 250GB HDD and 3GB RAM, 32-bit).What I want to do is format the HDD (removing both partitions) and make a clean install of Ubuntu only.I tried for several hours last night to achieve this using Ubuntu 10.10 and Pendrive, but with no success. System would not boot from USB stick.
How do I: 1. Format the HDD and remove the partitions using only Ubuntu on a USB stick?
2. Install Ubuntu and partition the HDD ready to copy over my backed up files?
I want to Re install windows 7, but when i do so it removes GRUB making me unable to boot into Ubuntu. Is there any way in which i can install Windows without removing GRUB?
am currently using Windows 7 across my networked PCs at home.
I've just received my new Samsung N250 Plus Netbook which comes with Windows 7 Starter (yuk). I read a post on Ebuyer from someone who has installed ubuntu on his N250 so thought I'd give it a go tonight.
My main concern is whether my wi-fi card (Broadcom 802.11n according to windows) will work when I remove windows and install ubuntu. I intend to use the netbook for internet use only while working abroad.
Is it possible to test it works by running ubuntu from my USB stick first (without removing windows 7)?
I did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted.
I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive.
However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message im given means I think it could be trying to fchk it.
Do I need to do something more like remove /dev/sdd ?
after removing some programs I'm not able to login (I'm using an other computer now). I'm using opensuse 11.4the boot screen has changed from the normal to a grey one. before login following messages came up:
I'm planning to replace kde with gnome so my plan is to visit Yast pattern view check Gnome Desktopand Gnome Base System then unchecking Kde4 Desktop and Kde base system.i'm seeking stability I know openSUSE has it but no with kde.is this the right way to replace my desktop environment , I will not download the gnome iso and make a new installation
I've reached the point where I rarely need to boot into my physical WinXP install, which is a total mess right now as well ... so I've decided that I want to completely remove it from my system, then create a virtual install of Vista Business Edition.
I have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.
On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.
I have had to reinstall OpenSUSE just to get my PC to boot.
All I want to is remove OpenSUSE from my computer without losing my Win 7 install.
My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.
Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.
Hoping for some verification before I proceed.An alt kernel was installed side by side with the current mainstream kernel during an experimental NIC driver install. Unfortunately, since the experiment failed I would now like to remove all traces of the alt kernel since it was given a version ahead of the current main version and I would like to avoid all possibilities of contention should a future kernel upgrade use the experimental alt kernel's version number.
I'm currently running a Vista machine, but would like to switch over to Linux, Ubuntu in particular. My question is can I switch over to Ubuntu, keep my Windows partition and use VirtualBox to access the pre-existing Windows partition? Or does VirtualBox require me to create a new install for Guest operating systems?
If not, are there any other free alternatives to accomplish this?
I'm wondering if anyone can give me some tips about this.I have very little fedora experiee and wanna start playing with it now.I'v bin using it for some short time a long ago but nothing much.Now I could use some help with this:Can I and how, instal Fedora11, while having Windows7 instaleed allready and then have them both with dual boot. I guess it should be possible but some tips / guide would be great so I don't kill my windows and have to reinstal all over again, as i wanna keep windows as main OS for work but have fedora to learn as well.By the way, I have 2x640Gb in raid0, 1st partition 100gb with Windows7 on it, and the rest on another partition. Both have data on them. If that means anything for instalation
I've finally had enough of Windows and have decided to go with Ubuntu. However I hope someone can help me with this query... I currently have a single hard drive which I have partitioned under Windows into two. The old C:drive holds software & the windows O/S and the D: drive is where I stored photos, documents, etc. Can you tell me if it is possible to install Ubuntu into the old C: partition and leave the d: partition in tact (for a few weeks to ensure I have backups of everything on here). Alternatively, if I add a new drive and install Ubuntu onto there, will I still be able to access the old D: partition (or would I need some kind of dual boot config)?
Ok so I have been using Ubuntu for a few months, but considering how I am a total noob at doing alot of things on it i wanna get some background info about a few things before I start screwing with it.1) On deviantart i see alot of people will totally customized desktops using something called GTK2, questions: how to get and how to use? (a nice tutorial page might help lol i cant seem to find it on google)
2) I have a computer running vista and I have Ubuntu installed onto it using Wubi. I am keeping the Windows because I need it to run the latest version of iTunes (unless wine can run it but I havent tried yet because my media folder is larger than the 30 gigs i have for ubuntu). I also want to keep my windows folders and Ubuntu folders completely seperate, so my question: is there a way to increase the partition size of Wubi to past 30 gigs? I have tried to use wubi-add-virtual-disk, but when i used it it successfully repartitioned but than i rebooted and it said that root.disk was missing and my entire Ubuntu was gone (lame i know). I also did all the recent updates from the update manager, but that shouldnt cause that problem should it?
2) a) lol if possible i would like to entirely create a new partition on my computer and install Ubuntu from there (simplifies alot of things), but i cant seem to shrink my existing hard drive... the max i can shrink is it 1.4 gigs. Does anyone know how to increase that space? (I have a 300 gig hard drive with 230 gigs free i wanna create a new partition with 210 gigs for ubuntu leaving windows with only 20 gigs of free space). I have looked at using Gparted to redo the partitions, but it destroys windows and I dont have a Vista reboot CD and cant get one cause i live in china o.o
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
I'm currently running ubuntu on my netbook, and vista on my desktop. Earlier i had an ubuntu installation alongside my vista, this has resaulted in my desktop making a countdown at booting. After the countdown it boots up vista. So i'm aware that there still are som leftovers from my earlier umuntu adventures.... here is my objective: I want to keep my vista installation intact, BUT i need to clear all earlier grub and ubuntu installations...and finally I want to install a fresh ubuntu 10.04.
I have a fubar'd Windows 7 install I need to get working on another partition so I can do some development stuff. I use Ubuntu 95% of the time though and so the machine has an option at boot for what OS I want to go into. Does anyone know if I boot up with the Windows disc in and choose the repair option if it will screw up my boot options and I potentially lose my ability to boot into Ubuntu?
When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
Is there some blog, changelog, or place where i can track what issues get fixed in the opensuse gnome 3 implementation, or what features are bein added, what changes are bein made, etc.?For example, if there is some bug in opensuse with gnome 3, where can i read that it has been fixed in the dd/mm update, or that new feature xxxyyy was added in dd/mm update, etc.Im talking about issues, fixes, updates related to gnome 3 with opensuse. Not just opensuse with 2xgnome or kde.
I have been having problems keeping my hard drives alive with openSUSE 11.3, it is happening way to often and I'm starting to think its more than bad luck. The hard drives that I have been using are brand new 500 GB Western Digital hard drives. Once I get it I would do SMART test on it, which all turn out clean, then a couple of months later I go to boot my system and I am fronted with a { DRDY ERR } { UNC}. Checking the SMART selftest log from the repair mode on the DVD I get a read failure at about 10% of the drive, the LBA of first error is: 578307645. I can't keep replacing the HDD ever couple of months its just getting way to expensive.
I have a netbook (Acer Aspire One ZG5) with ubuntu only partitioned this way:
/ swap /home
Since this ubuntu is 10.04 upgraded many times (since 8.04) I want to make a fresh install, and also want to take the oportunity to install and give a try to meego, so I want to...
/ ubuntu / meego swap (need to expand) /home (ubuntu)
My question is can I keep my current /home partition (which is encripted) and use it with my new 10.10? How?
I installed opensuse in my laptop in which I already installed opensuse.Now the grub shows first, on boot up. I want to set windows bootloader in front. In order to do that, I did the following,
1. unmount all devices "umount /windows/*" 2. my hard disk partition:- see the link cfdisk /dev/sda | Flickr - Photo Sharing! 3. mount the C drive (where win 7 is installed) "ntfs-3g /dev/sda3 /mnt/windows -o force " 4. dd if=/dev/sda8 of=/mnt/windows/suse.bin bs=512 count=1 5. kwrite /mnt/windows/boot.ini and write the following,
