Ubuntu :: Install 10.10 Keeping Old /home Partition?
Oct 20, 2010
I have a netbook (Acer Aspire One ZG5) with ubuntu only partitioned this way:
/
swap
/home
Since this ubuntu is 10.04 upgraded many times (since 8.04) I want to make a fresh install, and also want to take the oportunity to install and give a try to meego, so I want to...
/ ubuntu
/ meego
swap (need to expand)
/home (ubuntu)
My question is can I keep my current /home partition (which is encripted) and use it with my new 10.10? How?
View 5 Replies
ADVERTISEMENT
Feb 23, 2011
I'm upgrading to 11.3 (from 11.2) and will be keeping my current home partition. Will this keep my browser favorites? Also, I read somewhere that in order for things to work properly after upgrading (without reformatting my /home partition) that I would have to keep the same username AND user UID...? Is that true? How do I make sure I have the same UID if so...?
I purposely set up a seperate home partition so that when I changed distro's or upgraded I would still have my files, and some settings intact. (I switched distros a lot when I first started using Linux.) I set up a "bin" folder (in home folder) that had a couple of programs I had downloaded to keep from having to set up and configure everything all over again every time I felt like changing distro's as well.
View 9 Replies
View Related
Mar 15, 2010
I have a /home partition at /dev/sda3 and I am currently in Gparted. I wanted to know if I am supposed to re-identify it somehow when I re-install ubuntu on /dev/sda2.
It seems to me that it would try and create a new home directory on /dev/sda2 unless I tell it otherwise. Is this correct? I just want to make sure I don't do two things...
1. End up with 2 home directories
2. Delete my existing home directory at /dev/sda3 (with my files)
View 3 Replies
View Related
May 29, 2010
I have 9.04 in my laptop and I want to make a clean install of Lynx.
My home partition is sda7 (ext4), so in the partition step during the install I'm telling the installer to use the partition as ext4 but don't format it (I'm explicitly checking sda6 as / mount point and set to format as ext4).
On the next step I see disabled options regarding the access to my home folder and "Require my password to log in and decrypt my home folder" is checked.
My current home partition is not an encrypted partition, so I am not sure of what will happen. I just want it to mount it and access it as Ext4, not encrypt it.
I also have a Private folder in my home partition, what will happen to it? Will I be able to mount it afterwards?
View 6 Replies
View Related
Jun 14, 2011
I have a dual boot windows XP/OpenSuse 11.3 system running from a hard drive. They are both 32 bit in spite of the fact that the system can run 64 bit.
I would like to upgrade to Windows 7 64 bit (the wife insists, not yet a Linux possibility) and OpenSuse 11.4 64 bit, but having the programme files on an SSD for faster loading, with my data files on the existing hard drive.
I'm happy with the notion of getting the SSD going as a dual boot system. With Windows, as I understand it, it can tell it fairly easily where to look for the "my documents" folder on the hard drive.
However, the Home directory in Linux is not quite the same. How (if it's possible) could I run the SSD but use my existing Home directory on the hard drive?
View 9 Replies
View Related
May 23, 2011
Having read several threads and received excellent previous advice there are just a couple of points I want to check please before proceeding on laptop. I want to upgrade to 11.4 from 11.2. My disk setup is as follows:-
Disk /dev/sda: 120.0 GB, 120034123776 bytes
240 heads, 63 sectors/track, 15505 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x462d462c
[Code]..
If I select existing /home root and swap partitions, format root but prevent formatting of /home and use a different user ID I believe that will leave my existing data intact and will allow me to trial new os. Is this correct approach? If all goes well and when I have new system working correctly, what is best way make old user id date accessible. Can I simply create my old id on new system and will that allow me to access data when I log on with that id?
Second question; at present I have the ability to boot to openSUSE, OS/2 and windoze. (It used to be done entirely by Boot Manager but during my last Linux installation I messed this up a bit so now machine boots to grub and this offers all three operating systems but chain loads Boot Manager if I select OS/2)
When I do the new installation what should I select to retain this setup so that I still have access to windoze and OS/2 but when selecting linux have new 11.4 system run.
View 9 Replies
View Related
Jan 14, 2011
I'm using Ubuntu 9.04 and I want to move to 10.10. The upgrade path would be very long so I want to do a fresh install. I have twisted a little bit my Gnome appearance (theme, icons in menu bar, etc.). I would like to install it, keeping all of my files in my home folder but using fresh visual settings from Maverick. What should I do?
View 1 Replies
View Related
Jan 14, 2010
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies
View Related
May 9, 2011
I have a 32g usb stick and I am trying to install Ubuntu on it. But I want to keep 16g as storage space so that I can have it as a normal USB storage for daily use. It's my understanding that I need to create 2 partition ( Since I want to use ext4 for the system which windows doesn't recognize?). But when I created two logical partition and installed ubuntu onto the second partition <sdc6>, I can't seem to boot into there,the screen stays on the white cursor blinking mode, and the usb isn't being read. Is there any way that I could do this? I just want half used as storage and half as Ubuntu system.
View 1 Replies
View Related
Jun 2, 2010
I have two partitions where I can install (e.g. versions of openSUSE). I have a Swap and a /home partition to be shared by both. Thus e.g., while still running 10.3, I could install and test 11.2. Once I switched over to 11.2, I still can use 10.3 when need arises (not done for monthes now). I have the 10.3 partition mounted, thus I can stilll see what was in /etc/.... on the 10.3 system from the 11.2 system if need arises.
I gave the file systemss on those two partitiions different labels to better keep them apart. It is in the first place up to you to design how you want to partition your disk(s) to facilitate such a feature. Has someone done a thing like this (especially sharing /home partition) with openSUSE and Ubuntu? Is there a How-To anywhere? Until now I have the /home folder of Ubuntu not on a separate partition but under the system/root partition "/" of Ubuntu.
View 9 Replies
View Related
Mar 1, 2010
I guess it's time to move up to Ubuntu 9.10 from 9.04 ...unless you would advise me to stay with 9.04. Either way, I would like to do a clean install. I managed to create a separate partition for /home almost a year ago ... now the only thing I want to keep inside /home is one big folder which I already had made a backup copy with several DVDs (larger than 4GB). Besides that large folder, I would like to start everything new. This would be my second time installing and it has been quite awhile. Here are my questions:
1. I know I have backup DVDs in hand. But sometimes DVDs are funky. I would restore my files with DVDs as last resort. So, should I just delete all files and folders (including hidden ones) under /home except a large folder that I would like to keep? If so, can I do that while on a normal gnome session or am I better off doing it while on Live CD?
2. I see a suggestion that when installing Ubuntu, I need to make sure to mount /home but NOT FORMAT IT. Is there a visual tutorial or step-by-step guide showing how to do this?
3. Are there other gotchas like I need to "create" user name the exact same spelling as old user name that is already created under /home on my harddrive?
View 3 Replies
View Related
Mar 13, 2010
Long story short, my Windows had a fatal crash the other day and since I couldn't find the installation disk, I burned the Ubuntu 9.10 disk image to a CD at a friend's place and installed it on one partition of the hard drive. The other partition contained tons of Windows programs and documents in an NTFS system. Ubuntu is cool and all, but when I finally found the Windows disk, I wanted to reinstall it for dual-booting, to use some programs that don't run well in Wine.
To keep some documents safe and not waste any CDs, I moved them over to the Ubuntu partition before installing Windows. As experienced ubuntuists know, the slightly clumsy Windows installer erases GRUB in the process, and it's recommended to install Windows first. So, now I ended up with a working Windows partition and an Ubuntu partition with all of the stored data, which I can access via guest status with the burned CD.
Here's the catch though - as a guest and without Linux properly installed I can't move anything I moved to the Linux partition from the Windows partition back anymore. All the folders have a little X on their top corner. I'd be glad to reinstall Ubuntu now, but I must know how to keep all that tranferred data safe. Can I keep it there during the reinstallation? Should I install Wubi on Windows and access the stuff through it?
View 3 Replies
View Related
Mar 20, 2011
I've read several accounts of users who upgraded Ubuntu versions and ran into problems. I read that putting /home on a separate partition can make it easier to do upgrades. But it seems to me application versions and even the default applications themselves change so much between Ubuntu releases that I question whether it's a good idea to have all the "OLD" config files and settings that get stored in /home sitting around when running a new Ubuntu release.Does anyone think it's a better idea to just put the whole Ubuntu install (i.e., / and /home) on the same partition? And then when upgrading, backup, and then just fresh install everything (to get the cleanest possible installation)?
View 9 Replies
View Related
Dec 28, 2009
I was looking to do a fresh install of 11.2 and use my home partition from 11.1. During the Gnome Live version I wanted to see how suse would configure my computer. It recognized everything fine, except it didn't show my current home partition which is ext 3. Because Opensuse 11.2 has switched to ext 4 as default for root and home? I was hoping to use my old home with 11.2. Is there any way to make the switch without losing my settings? During the live install the partitioner didn't use my current home partition, it was going to make a new one.
So I opened up the partitioner in yast to see why it didn't use my current home and it shows no mount point for my home ext 3. Would changing the mount point on my ext 3 partition to home make the 11.2 installer recognize this as my home to use? Or will I have to copy my current home. Paste it elsewhere. Delete old home. Use unallocated space as ext 4. Paste old home on new ext4 to have the 11.2 installer recognize this as my home. So, current home is ext 3. 11.2 installer wants to make a new home on ext4. How do I use my current home settings? I haven't installed yet just tried a live run.
View 4 Replies
View Related
Mar 27, 2010
I was recently forced to do a reinstall of OpenSUSE. As part of that I backed up the folders I needed to keep. The installation however didn't format the 'Home' partition though. At first I thought it was nice, but I've run into trouble with a program I most definately need to get working. So my plan is to re-install yet again.
how to make the install format the root partition I think it is, and the 'home' partition, so I can start fresh.
To further complicate things My laptop (which this is happening on) is dual booting between OpenSUSE and Windows 7. It is VERY important that the windows partitions remain.
View 9 Replies
View Related
Feb 5, 2011
When I loaded opensuse 11.3 for the first time, I used the automatic partitioner and have been loading app's onto my ~8GB boot partition, and now that it's full, I have ~15 GB free on my home partition and need to install a few more app's to get my laptop fully functional. Is there a way (other than copying the boot partition to the home partition and then repartitioning, copying again to the repartitioned drive, and then recopying again to the freed up space) to get the new app's I install to redirect to my home partition?
View 9 Replies
View Related
Dec 28, 2009
This is strange. I moved OS 11.1 from an old 150 GB PATA drive over to a 500 GB SATA using Parted Magic. The old and new partitions were
Code:
OLD:
/dev/sda1 - 19.99 GB, mounted as / (root partition)
/dev/sda2 - 97.82 GB, mounted as /home
/dev/sdb1 - 29.52 GB, Windows XP
NEW:
/dev/sda1 - 29.30 GB, mounted as /
/dev/sda2 -292.97 GB, mounted as /home
/dev/sda3 - 45.82 GB, Windows XP
I used the "Clonezilla" tool on the Parted Magic live CD to move and resize the partitions. To my delight, everything appeared to transfer just fine. I can boot into OpenSUSE 11.1 (though not into Windows, but that's not really important; I'll figure that out later), but my /home partition won't mount. I'm set to autologin, and I get the expected error: "can't access /home/stephen" (or something like that). Here's the weird thing. I can ALT-F3, get a terminal and manually "mount /dev/sda2 /home", go back to ATL-F7 and log right in, so I know the disk is fine. (I've already 'fsck'd everything, by the way, and they're clean.)
I've used Yast's partitioner about a dozen times, trying "device by ID" and other settings. I always get the same thing when I reboot. On this last reboot, when it refused to log into /home, I ALT-F3'd, logged in as root, did a "cat" on "/etc/fstab" and entered the device-by-id line exactly as I saw it there and it mounted the /home directory just fine! ALT-F7, logged into KDE. I'm typing this in KDE now. Works fine. I so rarely need to reboot this machine that I can manually mount the /home partition, if need be, but (obviously) I'd like it to be mounted automatically during the boot.
Here's my /etc/fstab:
Code:
/dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part1 / ext3
acl,user_xattr 1 1
/dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part2 /home ext3 acl,user_xattr user,acl,1 2
/dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part3 /windows/C
ntfs-3g users,gid=users,fmask=133,dmask=022,locale=en_US.UTF-8 0 0 .....
I don't see anything obviously wrong here. The fact that I can take that second line and do a manual "mount" shows me that the device ID is at least correct. Just to be clear, here's what I entered in virtual terminal 3 as root to get my home partition to mount:
Code:
mount /dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part2 /home
and it worked fine. Exact same line.
View 9 Replies
View Related
Mar 3, 2010
I'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.
It always wants to create a separate /home partition.
I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?
View 2 Replies
View Related
Jul 18, 2010
Im using suse 11.1 with /home on a separate partition. To move my /home to a larger partition it looked easy to use Yast partitioner. I copied all /home/ files first to the new partition and backed-up fstab.
with Yast I unmounted /dev/sdb6 = /home and mounted it to /local
then unmounted /dev/sda4 = mynewhomepartition and mounted it to /home
checking the new fstab it looked fine but after a restart it did not work and I got an error. resetting the original fstab resetted the system as it used to be. My question is: why does it not work, are there (hidden) files with the old or other settings?.
View 4 Replies
View Related
Apr 30, 2011
I mistakenly removed my /home of openSUSE while trying to install another distro. My root pertition is OK. openSUSE is shown in grub. but i cannot boot into it as there is no /home is there any way to fix this without removing my openSUSE?
View 9 Replies
View Related
Jul 24, 2011
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
View 4 Replies
View Related
Jun 25, 2010
Looks like I missed defining a /home dir during installation. It's been a while I have a spare partition now that I'd really love to use. Can you specify this still, or is it only allowed during an install?
View 3 Replies
View Related
Jan 13, 2010
want to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
View 1 Replies
View Related
May 10, 2010
How would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
View 6 Replies
View Related
Jul 17, 2010
I just installed suse 11.3 on formatted partitions (5GB swap, 30GB / and 500GB /home). Just after the installation, My computer showed 25.2GB of /home to be used. When I do:
Code:
dyn-0a2a1f40:/ # df -h .....
That seem to be roughly correct because since yesterday I've been running a program that constantly writes logs and other data files and plots, which might have accumulated a few GB's. It is also collaborated by the output of
Code:
dyn-0a2a1f40:/ # du -sk /home
10548452 /home
I'm not hard-up on space right now but storage has been dear until the recent past. Also out of curiosity, the size of the /home partition is shown as 493 instead of the 500GB allocated while the swap also lists only 4GB instead of 5GB. Below is the output for fdisk -l in case anyone needs it:
Code:
dyn-0a2a1f40:/ # fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x219b052d .....
I have Linux 2.6.34-12-desktop x86_64 and KDE 4.4.5 (which I had previously used in 11.2 without any problems) and 4.0GB RAM.
View 9 Replies
View Related
Sep 25, 2009
I'm planning FC11 x86_64 with a live cd , but I would like to preserve my /home partition that is in ext3 . or is there a way to do an install and keep my /home and convert it after in ext4
View 1 Replies
View Related
Oct 14, 2010
When running the umount command like this as superuser: umount /dev/sda8. get the following message:umount: /home: device is busy.(In some cases useful info about processes that usethe device is found by lsof(8) or fuser(1))
View 9 Replies
View Related
Mar 28, 2011
recently i made a backup of my home directory in 10.10 before reinstalling 10.10. again.This time I chose to manually define the partitions (50GB Root, 25GB Swap, 325GB Home)Now i wish to migrate the old home into the newly installed home, which is on a separate partition.I have found the following documentation URL...Still, as a beginner I am not quite sure about the necessary steps to perform.As the new home is located on a separate partition is it possible to simple delete all directories there and copy all directories from old home to new home with rsync?
Do I have to install all the software that corresponds to the old home first followed by migrating home or first migrating home followed by installing the software such as thunderbird, Texlive2010 etc.Guess that migration should take place at a later stage. Otherwise my old profile files from firefox and thunderbird will be overwriten by new ones?
View 1 Replies
View Related
Jul 1, 2011
Been digging around and not finding anything that quite works.
Background: I had an existing 10.10 install and 10.04 on another partition. When I installed the 10.04 I told it to use the existing /home partition which is also being used by the 10.10 install. All good, both users have directories with all their data in the same /home partition.
Issue: So, as the 10.04 was 32bit (experimenting but another story) I decided I would replace with 10.04 64bit. All went well except when I did the manual partitioning I screwed up and instead of setting the existing /home partition to 'use but don't format' - which I think is what I must have done last time - I left it as 'don't use and don't format'. So, obviously, now the new 10.04 install has its /home inside /, which I don't want. I want it on the existing /home partition as it was with the previous 10.04 install.
Question(s): Is there any simple(ish) way of doing this without a reinstall? Not a major problem as I have only just installed and can do it again without losing anything but time, but I would like to figure out a way to do it without if possible.I want to essentially move the /home/user directory (rather than the /home) and make it /media/home/user inside the existing partition. Seems easy enough on the surface but becomes involved as I investigate.Ubuntu 10.04 minimal install with Xfce DE.
View 8 Replies
View Related
Jun 22, 2010
i have 2 harddrives. a 6gb and an 11gb. IDE ATA. i want to install opensuse 11.2 on them, using EXT4, in a different way this time. i want the "/" partition to cover all of the 6gb, with the drive set to master. For the slave, I want the "/home" partition on the 11gb, covering only 10gb on the beginning of the drive, and i want the swap space partition on the end of the drive using 1gb. Is this a smart way to install it? Will i have to continuously mount the drive with home and swap on it? What is the best configuration for using these two drives?
View 9 Replies
View Related
