I've reached the point where I rarely need to boot into my physical WinXP install, which is a total mess right now as well ... so I've decided that I want to completely remove it from my system, then create a virtual install of Vista Business Edition.
View 4 RepliesI am attempting to make my HP DV6000 laptop dual boot with WinXP and OpenSuse 11.3. I've upgraded the hard drive in this system to 500GB and have WinXP in a 100GB primary partition. There is also a 12GB system recovery logical partition. In preparation for Linux, I used the Windows disk manager to create a 50GB primary partition. I've defragged and run check disk on both of the primary partitions and found no problems.
For the Linux install, I downloaded the OpenSuse 11.3 DVD image using metalink and DownLoadThemAll so I'm pretty confident I got a good image. I burned it to a DVD, verified that, then verified the install image using the openSuse installer. Everything looks good. When I attempt to do the install of Linux however, the suggested partitioning says that it wants to delete partitions /dev/sda1 (99.06GB), /dev/sda2 (48.83GB) and /dev/sda3 (11.72GB). In each case, it says resize is impossible due to inconsistent fs, Try checking under windows.
It then says that it wants to create three new volumes for /dev/sda1 (2.01 GB), /dev/sda2 (20.00GB) and /dev/sda3 (443.75 GB). In other words, it wants to devote the entire disk to Linux.
I thought that I would be able to tell it to install Linux in the 50GB partition that I had created for it and that it would subdivide that into volumes as appropriate. If it wanted to delete that partition and create a new one that would be fine too, but I don't understand why it thinks that it needs to delete the WinXP and recovery partitions.
Is there a way I can work around this by using either the Create Partition Setup or Edit Partition Setup options available in the installer? Or better yet, is there something I can do via windows partitioning before I install that will prevent it from wanting to delete my windows partitions in the first place?
VistaOS but I want to now install Winxp but Vista keeps booting its partition. I tried hiding the vista MBR and lucid mbr but some how Vista keeps booting itself so when I have the winxp disk loaded, it goes to the blue screen with errors like reboot windows and run chkdsk.exe /F to fix the problem. anyideas? ill post pics of my partition setup soon.
View 1 Replies View RelatedHow do i create two partition on my hdd and install rhel on one and windows xp on the other
View 2 Replies View RelatedI have winxp and ubuntu 10.04 dualboot. They were working ok. Today I removed old *21 kernel image and headers so grub updated the confs. That's all I did that could cause the win no longer boot. It starts booting, the screen goes black and the PC reboots. I tried safe mode, it started to load some dlls as it usually shows in safe mode but then still reboot.
Code:
$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
I am trying to use Xen tools to run multiple operating systems on my machine. The problem is that when I try to install Windows (32) XP (using "hvm" build) it crashes ! It crashes after it starts copying some files (immediately after formatting) at 18%/20%). I can't see the cause of this such a crash, I know it's a crash because I told it to restart on case. Here is my configuration file:
Code:
name="WindowsXP"
memory=256
maxmem=512
[code]....
I am trying to install openSUSE 11.4 as a virtual machine running on VMWare Server V1.0. VMWare Server is running under WinXP 32bit.
I configured the VM with the following settings:
10GB disk
512 MB Ram
The installation starts from the DVD after inserting the disk. OpenSUSE setup appears, i do not touch the default resolution 800x600. Every thing is looking good. After setting the language, the installation process continues. Then a problem with the screen/resolution/graphical adapter appears. After a while I cannot read anything from the setup screen, everything is unreadable. I remember I had those problems already with 11.3 but I did not follow this issue an took openSUSE 11.1 instead. With 11.1 I could follow the installation instruction till the end and I got a running system.
So I recently started using Windows 7, but it kept crashing so i thought "OK back to WinXP and Ubuntu 10.10" So I installed Windows (urrrggh) and that went fine, but now that I have come to installing Ubuntu Desktop 10.10, it cant seem to find the Windows XP partition, I tried manually editing partitions but it wouldnt let me resize the partition. But it did give me the option to install the Bootloader (GRUB) to the partition labelled "Windows XP Professional".
I have used this setup before and ran fine, bare in mind that was with 9.10, maybe I should install 9.10 and then use "sudo apt-get install dist-upgrade"?If i cant get this working I will try another distro and see if its Ubuntu or whether its a Windows or disk issue.
I'm trying to install Ubuntu 10.10 on my WinXP desktop computer. I used the LiveCD and manually configured the partitions. I resized my XP partition (the entire SATA HDD) and created a 37GB partition for Ubuntu, as well as a 3GB swap file. I installed the boot loader on the Ubuntu partition. But BIOS doesn't recognize that the drive has separate partitions, and I can't boot into it from Windows either. I know I didn't modify WinXP's MBR, but should I have? I didn't know where it was.
I booted into the LiveCD again, and went into the disk manager. I Edited the Ubuntu partition and saw a checkbox that said "Bootable". I checked it and hit apply, hoping that might do it. I waited twenty minutes and the little circle was still spinning with no indication that it was actually doing anything or any warning of how long it would take, so I rebooted. Still no luck.
Someone told me that Ubuntu sometimes won't be bootable if you have both SATA and PATA drives in the system, which I do (although both XP and Ubuntu are on the same, SATA drive) and gave me a page that told me to use Grub4Dos. I fiddled around with that, only to come onto the Ubuntu website and find out that the page they gave me was outdated, before Ubuntu used GRUB2.
I did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted.
I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive.
However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message im given means I think it could be trying to fchk it.
Do I need to do something more like remove /dev/sdd ?
I just got it all set up and it has everything I need for what i do on my computer and it does alot better and smoother. So now im convinced linux KDE is where the party is at! HAaha so I want to remove windows 7 from my notebook and have openSUSE as the only OS running on it. Can anybody help me with removing windows 7 and leaving openSUSE on it? I was also hopeing that i'll be able to use the disk space with opensuse that my windows 7 is currently useing.
View 9 Replies View Relatedafter removing some programs I'm not able to login (I'm using an other computer now). I'm using opensuse 11.4the boot screen has changed from the normal to a grey one. before login following messages came up:
bluetoothd[1460]: input-headset driver probe failed for device D8:2A:7E:7F:4E:17
kernel [24.446981] vboxdr: fAsync=0
offMin=0x38a offMax=0xdc2
[code]...
I'm planning to replace kde with gnome so my plan is to visit Yast pattern view check Gnome Desktopand Gnome Base System then unchecking Kde4 Desktop and Kde base system.i'm seeking stability I know openSUSE has it but no with kde.is this the right way to replace my desktop environment , I will not download the gnome iso and make a new installation
View 4 Replies View RelatedI have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.
On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.
I have had to reinstall OpenSUSE just to get my PC to boot.
All I want to is remove OpenSUSE from my computer without losing my Win 7 install.
My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.
Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.
Hoping for some verification before I proceed.An alt kernel was installed side by side with the current mainstream kernel during an experimental NIC driver install. Unfortunately, since the experiment failed I would now like to remove all traces of the alt kernel since it was given a version ahead of the current main version and I would like to avoid all possibilities of contention should a future kernel upgrade use the experimental alt kernel's version number.
View 9 Replies View RelatedSomeone on IRC had mentioned they had a shared partition in NTFS, and that Ubuntu could read from it just fine... I wanted to get a second opinion before I did anything. Right now I have a WinXP partition and an Ubuntu partition, and a large NTFS partition in the middle that I'd like to move my /home to.
View 7 Replies View RelatedI dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedWhen openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3
sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code:
root@PartedMagic:~# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
[code]...
The default partition manager which OpenSUSE DVD 11.4 uses (Expert Partitioner) is not creating any logic partition with / mount because another system is already using it, is there anyway to fix this?
View 9 Replies View RelatedI have only Ubuntu 10.10 on my system. I made a separate partition for /boot folder (/dev/sda1/) which is 100 MB in size. Now I want to install windows 7 on my computer, I wish to convert this partition to the system reserved partition in windows.
I googled a bit for the problem & found exactly opposite process (in ubuntu documentation), where one can create a new /boot partition after installation. I wanted to know whether it is safe to use the same process for removing that /boot folder. Or is there a method for making a new /boot folder using the Live CD/USB?
I have a 32-bit laptop running a dual boot with Windows 7 and Ubuntu 10.09 LTS.I've decided that Ubuntu just isn't for me, and I want to remove the partition and restore the extra hard drive space back to Windows 7.
Now, a few months ago, I accidentally deleted my Ubuntu partition through Windows Disk Management, and I ended up not being able to boot up my computer. I can't remember what the exact cause was, but I think it was a problem with the GRUB, and I think I fixed it by reinstalling Ubuntu. Does anyone know how I can safely remove the Ubuntu partition without having to go through all this again?
My hard drive is partitioned fairly simply, with two primary partitions, one for Windows and one for Debian Squeeze.How can I remove sda1 and make it so that Debian takes up the whole disk on one large partition without reinstalling?I have downloaded and burnt the gparted live cd, but I daren't go any further without some hand holding.
View 11 Replies View RelatedI installed an old version on accident, I used an encrypted LVM. When I removed the old debian and started the installation of the new version, the encrypted partition could not be used to install, and the drive itself was creating an error message when I tried to mount the installation there. This is probably a vague explanation of what is happening, but does anyone know how to remove these encrypted LVM partitions?
View 2 Replies View RelatedWell the title says it all.I dual booted Ubuntu 10.04 with windows 7 just for an experiment.It was fun while it lasted but my 3d programs dont like it. So all the threads I found are about people that did it wrong but I dont want to get that far. So it is a fresh start. How to I remove ubuntu 10.04 and Grub.
View 2 Replies View RelatedThis might be a longshot but i used to use the 4 bay NAS here Which formated the HDD JBOD array to EXT2 , Anyway i want to move to an 8 bay DAS now but i cant find an application to convert the partitions .
Partition magic says the partitions are unformatted and the partition id is set to linux raid auto . Is there any way to convert this partition to vanilla EXT2 so i can use partition magic on it ? Its a 4TB array so copying isnt possible.
I just installed Ubuntu Remix 10.04 on my wifes MSI U100 netbook. I did a dual boot just in case she had to get into Windows for something. I let the install automatically partion (did the side by side option). Anyway, Ubuntu works fine and imported all her documents and stuff. Problem is Windows XP won't boot. The first time I tried to boot Windows XP I got a message saying the hardware had changed and I had to select safe mode, normal boot, last known good, etc... I booted normally. I got the splash screen followed by a quick flash of BSOD and a reboot. I does this no matter how I try to boot Windows (safe, command prompt, etc). Anyone have any idea what the problem is?
View 3 Replies View RelatedI am triple-booting the OS mentioned above. I only recently decided to try Arch. The issue however is with Arch & Ubuntu. My hard drive contains a common swap partition for Ubuntu and Arch, the home directories of both Linux, the C: drive for WinXP and a partition called 'Share' which as the name suggests I use to keep all the files (work, music, vids etc.) that I want to share between the various OS.
Till before Arch, I could easily share files between Ubuntu and WIndows. It seems it was possible because Windows does not respect the file permission restrictions, or may be not at least the ones imposed by Ubuntu. However now that I have Arch on a partition, Arch can not read the files owned by my user on the ntfs partition. This basically blocks my access to everything on the Arch system except for the system files.
I would like to know how I can securely share my files between the too Linux. If it is advisable and also if it is secure. For the workaround, I am not worried about using the cli, however one shall have to be patient with me since I am not a veteran at Linux.
I've got a laptop with Windows XP Professional and OpenSUSE on it. I want to install Ubuntu in place of OpenSUSE, but keep WinXP intact.
The choices Ubuntu presents are to install it in addition to the two existing operating system partitions, completely erase the hard drive and install Ubuntu, or create custom partitions.
I'm assuming I'd have to do the latter, but I'm not exactly sure how to go about it.