OpenSUSE Install :: Install Intel Fortran Compiler11.1 On 11.1
Jan 9, 2010
I m having problem installing the intel fortran compiler 11.1 on opensuse 11.1, Please can some1 guide me to this pls. I m a total newbie. I ve followed instructions on the web to download the noncomercial version of intel fortran compiler 11.1. I ve also managed to succesfully install it on my 32bit system, but the compiler does not seem to work when i tried to use it. i did
zypper install gcc33-32bit
error: gcc33-32bit not found
so i did
zypper install gcc33
installed successfully
downloaded, unpacked and installed intel
[code]....
View 3 Replies
ADVERTISEMENT
Jul 25, 2010
I will install ncetcdf4.1.1 with intel fortran 11.1 on centos,according to the readme file,"configure.."is complete,when i command "make",the following message apear:
[root@localhost ~/netcdf-4.1.1]# make
make all-recursive
make[1]: Entering directory `/home/hu/netcdf-4.1.1'
Making all in f90
[code]...
View 23 Replies
View Related
Mar 14, 2011
I need to install fluka.its manual says: To install FLUKA a FORTRAN compiler suitable for your platform is required to generate the FLUKA executable(s). At this moment, the only distributed version of FLUKA requires g77. I cant find g77 in package list.in ubuntu and debian it was.how can i install g77?
View 3 Replies
View Related
Dec 7, 2010
I want to install Fortran 90 in my opensuse 11.3 but i dont know the bash command. Can someone teach me?
The software of fortran 90 is at the media disk. Then, I want to install in my home directory. The format file is .lic
View 3 Replies
View Related
Sep 6, 2010
we need to install R on a new server. When we go to compile R it goes through the checks and finds GCC but fails looking for F77. What is the suggested Fortran package with the latest GCC?
View 1 Replies
View Related
Jul 16, 2010
I have a Intel server board machine that has a on board Matrox cardWith 11.2 the install barfs to text mode configuring the card during install butonce you log in a root and run sax2 it is OK once the machine restartsWith 11.3 it installs ( apparently ) perfectly then just goes to a blackscreen .. the usb keyboard is dead and that is that
View 3 Replies
View Related
Jul 20, 2010
I cannot install 11.3 on a machine with an intel raid controller I have tried with raid 1 using the card and then setting the disks to individual raid 0 and letting suse raid them. With the card doing it the machines crashes as soon as it tries to boot the first time, with suse doing the raid I just get 'GRUB' on the screen It seems a lot of people are having similar problems, does any one have any pointers. 11.2 installs fine. I would try and do a bug report but every time I go to the page it's in Czech
View 4 Replies
View Related
May 19, 2010
I want to compile MFiX which is a simulation software. Therefore, I installed the Intel Fortran Compiler Ver. 11.x When compiling, I can only choose between Ver.9.x and 10.x.
This is a part of the error message when choosing either:
Is there a possibility to link the program to the newer compiler version?
I'm using Centos 5.4.
View 5 Replies
View Related
Feb 19, 2011
I want to build Taucs library [URL] , to use its sparse solver in some number crunching apps, [URL] Since i plan to build these apps with the intel development suite, i better build Taucs with the same set of compilers... but AFAIK Taucs doesnt exist in <testing> or <unstable> ( I could apt-get source, and set appropriate flags for compilers it it did ) and i do not quite understand its build system ..It is not a ./configure system...it relies on external libs like blas, lapack and metis... which regardless of existing in Debian repo are built with gcc-4.5... so.. no way of using this to link with an Intel built library...
View 10 Replies
View Related
Aug 15, 2010
This issue is driving me nuts. I had manually modified the /etc/xorg.conf.d/50-device.conf to use intel driver, but for some unknown reason Xorg still uses framebuffer instead.
I though that I fixed the issue (by modifying device.conf) but its back after update.
Xorg.0.log
View 9 Replies
View Related
Jun 17, 2010
I want to change the motherboard and the CPU from an installed SUSE 10.3 Kernel 2.6.22.18-0.2-default from an AMD CPU and mother board to Intel quad Core CPU, and when I do so it doesn't boot. any idea of what can be the problem
View 3 Replies
View Related
Jul 3, 2010
I have server with Xeon E5620, 8 GB RAM, three 1TB hard drives which are in sw RAID 5 and two 250GB disk which are in sw RAID 1, all of this on Intel S5500BC motherboard. Installation of opensuse 11.0 11.1 11.2 and Enterprise suse 11 was successfull. After grub menu i get blank screen. It`s blank for about 60 - 120 sec and then appear Suse loading page and loading bar. This also happens if i change to text mod. But in text mod i can see what`s going on. First 5-10 lines are informations about partitions and then i get output just like on this link. Yfrog Image : yfrog.com/5nimag0108djIf i hit any key (in graph and text mode) booting will continue to opensuse loading screen and loading bar.I have tried installations on one workstation and one server and didn`t have this problem.
View 4 Replies
View Related
Apr 14, 2010
I should install a new openSuse 11.2 or if I should make an Update-Installation from DVD (see openSUSE 11.2 Installation Quick Start Installation Mode: Select Mode - New Installation / Update / [...]) or an Update Installation via Yast.Now I am using openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition).
Contra new installation?:
- I have an Laptop (Samsung x20) with integrated intel 915 graphic and an very hight resolution (1400x1050). The monitor's resolution is not listed in the bios of the graphic cart/solution. Because of that I had many problems with my fist installation of suse/openSuse linux.
- Will I have problems to keep my old accounts?
Pro new installation?:
- Sometimes funny system reports (mostly about ICE).
- I have been logged in as root in Gnome (as I had some problems with (no) audio, the digital optical audio out is still not running).
- I think the fist installation was a few years ago maybe I had been to often "bold".
View 9 Replies
View Related
Jul 28, 2010
If opensuse will run on a notebook with an Intel atom processor?
View 5 Replies
View Related
Jul 30, 2010
I just upgraded my system from oS 11.2 to oS 11.3 on Thursday. I've chosen the network-CD and booted from an USB-pen-drive, as my netbook doesn't have a CD-drive.I new experience that my computer freezes obviously randomly. It's not just a programme crashing, but the whole computer just halts. Nothings working anymore - mouse is not moving, keyboard doesn't respond, I can't even switch to another tty.I tried to remember what I was doing right before the crashes. Once I used the new netbook-desktop of KDE and had typed for an application in that "cool" new desktop. The desktop wend "blank" (the application folders disappeared and I was waiting till the results were shown) and then the computer froze. Just right now I used Okular, selected some text and opened the context-menu when the computer died, the other time I closed the Yakuake with F12 and the computer didn't respond just right before the window was minimized at the top and last but not least I had that "Expose"-like window arrangement opened and clicked at the black background when everything hang up.
What could be the reason for it? oS 11.2 worked perfectly - I hadn't had any crash during 5 months of intense use. I suspected the new graphics driver, but I can't find any reported bug about the Intel 945 GMA* or anything about the new KDE 4.4.4 on atom processors.
View 9 Replies
View Related
Sep 9, 2010
I installed 11.3 Gnome 32 bit in my system twice after couple logins and updates the system freezes. I can't use keybord etc. Only option is Power off/on. It happens either during boot/during usage randomly. I posted my issue in this forum and implemented the suggestion but after couple of reboots, now it won't boot, not even in safemode. So I have decided to Install again. In the same machine I have installed Ubuntu and it's working fine without any problems from 1 week.
[code]...
View 1 Replies
View Related
Jul 16, 2011
I am running Opensuse 11.4 on a file server, based on an Intel Atom motherboard with 945G graphics chipset.I recently shut down and then rebooted the server (because I needed to switch off the power for a few minutes) after it had had been running quite happily for several weeks since the last boot. Now I cannot start X - it gives up after the line(EE) intel(0): failed to set mode: Invalid argumentI've tried googling but am none the wiser what could have caused this, or how to fix it. Excerpts from the X log file:
Code:
[ 229.187]
X.Org X Server 1.9.3
[code].....
View 7 Replies
View Related
Jul 31, 2011
Just installed my first linux ever. The highest resolution I can get on my video card is 1024x768. I found out that I need to install iegd driver for my intell GM45 card. Can you tell me where I can download that driver and how I can install this?
View 9 Replies
View Related
Mar 12, 2011
I'm using openSUSE 11.4 KDE upgraded from 11.3. No nonstandard packages that I know of. I get this error messages on boot :
Code:
grzes@opensuse:/etc/init.d> sudo cat /var/log/boot.msg | grep '*ER*'
<3>[ 2.408570] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
<3>[ 2.665563] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
<3>[ 2.668069] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
<3>[ 2.668073] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
I was wondering why is this happening. I didn't get those on 11.3.Just to add my openSUSE boots normally and seems to work as expected. My graphics card/driver combo is :
Code:
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
Subsystem: ASUSTeK Computer Inc. Device [1043:1862]
Kernel driver in use: i915
View 2 Replies
View Related
May 8, 2010
I installed 11.2 on a Lenovo G460
CPU: Core i3
Graphic: Intel HD 4500
And I got a black screen. Installation media (DVD) is healthy.
View 1 Replies
View Related
May 22, 2010
I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.
Code:
hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_42
[code].....
View 7 Replies
View Related
Jul 15, 2010
I have two 150GB WD Raptors stripped in an INTEL ICH10R RAID0 array. Windows 7 is installed on it in a 100GB partition, there is a 150GB secondary partition, a 100MB system reserved partition created by Windows 7 and there is about 25GB unallocated space to install a linux distribution.My problem is the fake ICH10R RAID which does work only at the moment for me with Fedora Core 13 : Ubuntu 10.04 breaks it but i do not like FC13 very much. So i Googled and Googled for installation problems on this fakeraid and dmraid is involved there is a bug in it at least in Ubuntu 10.04 and openSUSE 11.2, with 11.3 my RAID is detected -> i have a MD RAID popup.
My question is : How to install properly 11.3 on the space left on my fake RAID array without breaking anything although i have a full backup of my system. I don't understand anything of the partitioning part of openSUSE in general. Do i must activate MD RAID, i tried once and my NTFS partitions were not displayed but RAID was detected with the correct size. I am totally lost with this installer.
View 8 Replies
View Related
Mar 23, 2011
So my netbook has overall very generic intel hardware Atom processor and Intel Graphic card the only component that requires a proprietary driver is the broadcom wireless card (unfortunately brcm40821 does not work for me) I am running opensuse 11.4 and I am willing to update the broadcom-wl driver each time there is a new kernel update in tumbleweed I am just wondering as of now, how stable is Tumbleweed (anyone has had any problem or success with tumbleweed, welcome to share in this post)
PS: I read (in the announcement/news section) with the new kernel (2.6.38-18), samba is finally working fine alongside apparmor.
View 2 Replies
View Related
Dec 17, 2010
So my aim is to install openSUSEx64 11.3 onto my Macbook; but for whatever reason, upon boot-up, the system won't recognize the USB thumb drive with the expanded image of openSUSE on it. I followed steps in Terminal to expand the image onto the said USB stick and know it worked properly because Terminal said "Process Completed." Do I need a special type of USB thumb drive or am I missing something? I am using a late-2009 Macbook. By the way, these were the steps used to prep the USB thumb stick:
1. Open a Terminal (under Utilities)
2. Run diskutil list to get the current list of devices
3. Insert your flash media
4. Run diskutil list again and determine the device node assigned to your flash media (e.g. /dev/disk2)
5. Run diskutil unmountDisk /dev/diskN
6. Execute sudo dd if=/path/to/downloaded.img of=/dev/diskN bs=1m
7. Run diskutil eject /dev/diskN and remove your flash media when the command completes
View 2 Replies
View Related
Aug 19, 2010
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
View 9 Replies
View Related
Jul 3, 2011
Wireless worked fine on live cd, but for some reason not after install. I think maybe the driver is not loading, but I am a pretty much still a noob, so my opinion isn't worth much. If it is the driver not loading, I don't know what to do to fix it. Here is my wireless output information.
Code:
linux:/home/linux # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Kernel driver in use: agpgart-intel
[Code]....
View 1 Replies
View Related
Sep 4, 2010
I verify in Intel site that my Intel'drivers are outdated, because Dell Suport is slow, so how do I update them in Opensuse?
Do I use Virtual Machine or try through Wine?
View 4 Replies
View Related
Jan 30, 2011
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
View 3 Replies
View Related
Feb 2, 2011
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies
View Related
Jun 14, 2010
If I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies
View Related
