OpenSUSE Install :: Blank Screen After Installing On Core I3 (VGA Intel HD 4500)

May 8, 2010

I installed 11.2 on a Lenovo G460

CPU: Core i3
Graphic: Intel HD 4500

And I got a black screen. Installation media (DVD) is healthy.

View 1 Replies


ADVERTISEMENT

OpenSUSE Install :: DELL Latitude E6410 - Core I7 M620 With Integrated Intel HD Graphics - Blank Screen

Aug 19, 2010

I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.

One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?

View 9 Replies View Related

OpenSUSE Install :: Blank Screen After Installing 11.2?

May 7, 2010

After struggling to install openSUSE 11.2 on my computer with ATI radoen graphics, I finally managed. Rebooting just after initial installation caused my laptop to give me a blank screen, no command prompt, nothing. With some help from the only post with such a problem on Ubuntu website and after first installation, I did the following:

1. Boot from Live cd of opensuse 11.2
2. Mount the partition which has root.
3. check for and delete Xorg

[code]...

View 4 Replies View Related

CentOS 5 :: Blank Screen On Reboot After Install (not Intel DDC Issue)?

Oct 12, 2010

I've been trying to install 5.5 here for the past few days, first from USB and now from the CDs, with no success. The problem occurs when I reboot after installing. After the BIOS has done it's thing I'm faced with a blank screen with a blinking cursor at the top left of the screen.

Initially I assumed that this was due to the intel driver problem which is reported in the release notes as a known issue, and the PC I'm installing on has intel graphics. However I have now done a text install and still have the same issue. I'm able to boot up the system using the CentOS live CD, which encounters no issues, and it mounts the local system no problem. After unmounting and remounting to get write access I'm able to change the device entry in /etc/X11/xorg.conf to have the Option "DDC" "false" entry. I can also see that the runlevel is set to 3 in /etc/inittab, still I get the blank screen on attempting to boot.

Any ideas on what might be wrong here? It really sounds like the intel driver problem people have described, and yet I can't even boot in text mode so that doesn't seem to be the case here. Could there be something wrong with the bootloader?

View 2 Replies View Related

OpenSUSE Install :: Unable To Use Core I3 Intel Clarkdale Graphic Controller

May 22, 2010

I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.

Code:

hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_42

[code].....

View 7 Replies View Related

OpenSUSE Hardware :: 11.3 On Intel Core I5 With Integrated Graphics + Intel H55 Express Chipset

Aug 18, 2010

! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...

I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...

View 8 Replies View Related

OpenSUSE Hardware :: Intel HD Graphics (Intel Core I3) With Suse 11.3 - Poor Resolution

Jan 2, 2011

I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :

Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....

View 9 Replies View Related

Hardware :: Video Driver For Debian - Intel GMA 4500

Oct 19, 2010

I'm trying to run/use the Intel GMA 4500 on my Debian Linux (Lenny), but I'm having some problems. I just can't find the drivers and the default installation does not install the correct driver.

View 3 Replies View Related

CentOS 5 Hardware :: Installing 5.4 X86_64 On Intel Core I7?

Apr 28, 2010

I'm trying to setup CentOS 5.4 x86_64 on a new machine but am running into problems. The machine is: CPU: Intel Core i7-860 RAM: 4GiB DDR3 Motherboard: Intel DQ57TM When booting from the disc, I get to the initial splash screen but almost immediately after that, I get a kernel panic.

None of the lines leading up to it mean much to me so I'm not sure what to copy here but the last line says: <0>Kernel panic - not syncing: Fatal exception

View 14 Replies View Related

OpenSUSE :: Blank Screen After Installing Nvidia Drivers?

Mar 15, 2010

I installed OpenSuse Gnome version 64 bit on a HP laptop DV7 Intel Dual Core with nVidia 9600 GM cardAll went well, until after I had installed the nVidia drivers from this page: NVIDIA drivers - openSUSEI selected the Geforce 1-click install and Yast went on to installl all the packages (a lot of 32-bit),took about half an hour.I logged out/in, and could work as normal, until I rebooted. Maybe I waited not long enough (5 minutes), but the screen was blank, then I gave up.Anyone has an explanation. I can always re-install everything, but then what went wrong with the nVidia package

View 9 Replies View Related

Slackware :: Intel 945 And Current / Getting Blank Screen?

May 23, 2010

I upgraded one of my laptops from 13.0 to current yesterday. I has an intel graphics card:

Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)

After all the package upgrading, removing obsolete packages, running lilo etc, I rebooted and I was really taken by surprise. Apparently, this certain intel graphics card doesn't work right with KMS. The boot process starts, I get to see the two tux twins and a few lines of boot messages, but as soon as KMS kicks in, everything goes completely blank. It doesn't crash or freeze or anything, the boot process continues, but it's all blank.

What's completely weird is that I have another laptop, which reports exactly the same graphics card, but KMS works fine there with current!

Anyway, I did some google search and I found that it's a common problem. There was a suggestion to remove any vga=... lines from lilo.conf, but that didn't help at all. Adding nomodeset to my boot options, disabled KMS, and I was able to boot to init 3, just like in 13.0. The problem was that then, it wasn't possible to launch X, because the intel driver that is included in current requires KMS to work!

So, after trying out a few different versions of the intel driver, I found that anything from 2.8.x and down wouldn't compile and that anything after and including 2.10.x require KMS. The only versions that would work are 2.9.0 and 2.9.1, which seem to have an identical effect here. They both work, but I have artifacts using my favorite mouse cursor theme, I get a black box instead of the mouse cursor. Not a big deal and choosing another theme fixed that too.

What I'm thinking is that probably more people will have the same problem and nothing is more frustrating than a completely blank screen. Maybe it would be a good idea to keep the 2.9.x versions of the driver in /extra. That and perhaps also add a note in the UPGRADE docs about adding nomodeset if you have an intel graphics card and you get a blank screen.

View 14 Replies View Related

Ubuntu Installation :: On Intel I5 64 Bit - Get Stuck With Blank Screen

Apr 28, 2010

I just bought a new Dell Studio Laptop with Intel i5 64 bit processor with Windows 7. I installed ubuntu with in my Windows 7 through CD and also tried to run it by installing it on Pen drive. But it just boots perfectly but get stuck with blank screen after that.

View 2 Replies View Related

Ubuntu :: 64 Bit Live USB, Blank Screen On Thinkpad X121e (Intel)

Aug 16, 2011

I have just received my new laptop - a Thinkpad x121e, with Intel (Core i3).

I am trying to put ubuntu on it, but i am having some problems with the 64 bit live USB.

When i run the USB i get i get a GRUB-looking screen, with options to:

Quote:

1. Try Ubuntu without installing
2. Install Ubuntu
3. Check the disk for errors

Wanting to repartition my hard drive (using GParted) so that i can dual boot, i Quote:

Try Ubuntu without Installing

, at which point the screen goes blank and nothing happens. I am then forced into a hard reboot. I get the exact same result when i pick

Quote:

Check the disk for errors

from the GRUB-like screen

To check the live USB, i tried it on my old laptop (32bit, Celeron M). When i did so i got a purple screen with an image of what looks like a keyboard and a man at the bottom, and then a message telling me to try a kernel which matches with my machine's architecture.

I then tried a live USB with 32 bit ubuntu and the live USB works fine - i am sending this email from this live instance running on my new Thinkpad. The same can be said for a 32 bit Mint live usb which also worked on the Thinkpad.

So i am not sure what is going on. If anyone could tell me why the 64bit live USB is not working, it would be great as i'd like to get it up and running. The only thing i could think of was that i have downloaded the amd64.iso, and this is an intel machine. Having said that i see that all the sites on the web suggest that this shouldn't make a difference (if it does, where might i get an 64 bit version for intel). In addition i am not sure why, if this was the problem, my old celeron laptop brings up the error message while the new machine just hangs.

View 3 Replies View Related

Hardware :: Intel GMA HD On Dell Latitude E5510 Blank Screen

Aug 6, 2010

I have a new Dell Latitude e5510 with Intel integrated graphics processor in I3, the model should be something like HD mobile Intel GMA integrated graphics (not able to find more precise details even under Windows using everest).

Trying to install Ubuntu 10.04 from livecd this returns me a black screen after I choose to try ubuntu. I already tried to use options as well nolapci nomodeset but without results. The screen lights up the backlight is on and I go into kernel panic because starting to cycle on and off repeatedly icons keypad lock and block number.

View 1 Replies View Related

Debian Hardware :: Intel ValleyView Gen7 With Blank Screen After Boot

Nov 18, 2014

I have a new laptop, I first installed Debian stable, but the wifi card didn't work, and the screen was 1024x768. So I installed kernel up to 3.16 with wheezy-backports, but after the boot, the screen become blank. The only way to see the screen is set "nomodeset" in /etc/default/grub, but It's impossible to see the screen beyond 1024x768 resolution.

I also tried to install linux-image deb packet from [URL] .... , because it worked for someone in internet, but not for me.

Here some details:

uname -r
3.16-0.bpo.2-amd64

View 4 Replies View Related

Ubuntu Installation :: Intel D101GGC Lucid Lynx 10.04 Blank Screen?

Jun 14, 2010

I've downloaded 10.04 desktop (twice) and server (once). The server install will boot fine, but the desktop install goes to a blank screen (and the monitor goes to sleep) after leaving the Live CD menu (Run from CD, Install, Check Files, Boot 1st HD, etc.).My first try at downloading the desktop CD was using BitTorrent, and appeared to go OK. Burned the .iso image, booted, and when I got the blank screen I suspected the Intel D101GGC motherboard using the Radeon Xpress 200 chipset had problemsI tried adding boot options (F6) such as vga=711 and xforcevesa and text. No joyOthers seemed to have gotten a successful install so I turned may attention to the CD, suspecting it was a bad download/burn, and downloaded 10.04 desktop again from mirror.pnl.gov/releases/. The two .iso images compared equal, so I used a different CD burner, with different media and got CDs which compare identical. Both CDs fail. Then I downloaded the server CD from PNL and it ran! I could select the "test CD" function, which ran in a text mode and said the server CD was OK. I started the install, and it went OK.

View 1 Replies View Related

OpenSUSE Install :: Screen Goes Blank After Booting Up?

Apr 15, 2010

So I Installed OpenSUSE A Plethora Of Times. In Both 32 & 64 bit. But No Matter What After It Boots Up And Where I Should See Some Kind Of User Interface The Screen Is Blank. Now this Is The Point Where You restart The Computer And See Where You Went Wrong But Come to find Out My Power And restart Buttons Dont Respond So i Have To Pull the Battery Out Of My Laptop.

View 4 Replies View Related

OpenSUSE Install :: Blank Screen After Sax2?

Jul 5, 2010

i installed, few days before susu 11.2 . now my lcd only has resolution of 800x600, so i type "sax2". after he made that config, suse displayed me a gui, where i can change resolution and my frequency. i selectet native resolution and freq. (the right nvidia driver and lcd was detectet) and hit that apply button, then i needs to restart. done it, but then i got after that loading bar of suse only blank screen. so what was wrong ? and what i can do now to fix ?

View 2 Replies View Related

OpenSUSE Install :: Blank Screen After 10 Minutes?

Aug 29, 2010

I have the problem (11.3) that the screen is blanked after 10 minutes (console and KDE). After some searching, I found out, it is a kernel "feature". Since it is a server, which should display network status permanently on screen this behavior is fatal.

I have tried:

- switch of power features vie Grub kernel param: apm=off, powersaved=off
- in kde via screensaver options
- in term "setterm -blank 0"

View 9 Replies View Related

OpenSUSE Install :: Blank Screen On Boot?

Nov 13, 2010

A surprising thing has happened! I have been happily using open suse 11.3 on an HP probook 4320s laptop. On reboot this morning, the screen starts out fine, but progressively fades into white and the boot does not seem to happen (at least there is no sound, since I cannot see anything). I am left with a completely white screen. Things are fine with the failsafe mode.

View 9 Replies View Related

OpenSUSE Install :: Blank Screen After 11.3->11.4 Upgrade?

Apr 3, 2011

I just tried to upgrade from 11.3 to 11.4 Using iso on DVD. All went well until the stage where the screen says something like "rebooting from installed system" when the screen just went blank. After removal of the DVD and re-start of the system, selecting the normal Desktop from the boot menu just returns me to the blank screen. I never see a login screen.

Selecting Failsafe caused what appeared to be a complete normal sequence with a Login that worked and I ended up in KDE4 (my usual desktop) with everything apparently working, even WIFI. But the next time I re-booted and selected Failsafe I just got a command prompt. I now find that selecting Failsafe alternates between the GUI and a command prompt on each attempt!

[Code]...

View 8 Replies View Related

OpenSUSE Install :: Blank Screen After Start Up

May 11, 2011

After I install SUSE I reboot and click on Desktop it then goes to a loading screen. After that it scrolls a lot of info then the screen goes blank. I have no idea why and I have tried it on 3 different computers with the same problem.

View 3 Replies View Related

Ubuntu Multimedia :: GMA 4500: Screen Goes Black Randomly?

Dec 4, 2010

I'm really new to Linux (meaning that I never programmed or anything) but have a major issue here: I have been using Ubuntu since 9.04 (always upgrading) and always with this Laptop, without problems. Then I installed 10.10, didn't like it and downgraded to 10.04. Thats when the issue came up. So now I'm using Ubuntu 10.04 and have an Intel GMA 4500 graphic card. That, though, is all I know about the graphics on my Laptop.

The problem:Every now and then (mostly right after logging in, then randomly) my monitor will flicker quickly and then go black completely.

After I close the laptop and open it up again, the screen works fine for some seconds, then, without moving anything, it goes black again. Sometimes it just stays normal, too. Just changing the angle of the monitor doesn't help, only closing it completely and opening it.

1) It could be the cable loop.BUT: The issue only appears after logging on to Linux. And moving the monitor doesnt help, just closing it completely.

2) Graphic driver.I have no idea how the software part of Linux works considering graphics. I have read that many people have had problems with GMA 4500, so my hope is that it can be fixed.

View 3 Replies View Related

OpenSUSE Install :: Booting After 11.3 Install - Hangs At A Blank Screen ?

Jun 8, 2011

I recently tried to upgrade my openSuSe 11.1 system using the instructions at:

SDB:System upgrade - openSUSE

I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?

View 9 Replies View Related

CentOS 5 Hardware :: Screen Goes Blank With Intel Motherboard - Not Even Grub Loader Shows Up

Jun 8, 2010

First time I am having issues with Centos.

I bought a Intel DQ45CB LGA Q45 Micro ATX Motherboard and I am installing the 64 bit version of centos.

The install of Centos goes just fine. However when I first try to boot up, after post is done, I get a blank screen. I do not even get on the Grub screen. No access to any of the ttys. No access to anything, files, folders. I only get a blkinking cursor, no command prompt, nothing.

This happened with Centos 5.2 and 5.3

Just for the hell of it, I installed XEN Xitrix and I have no issues like that.

View 2 Replies View Related

OpenSUSE Install :: 11.3 M4 Installed - Blank Screen At Boot?

Mar 28, 2010

Since 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:

33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:

Section "Device"
Identifier "Configured Video Device"
EndSection

[code]...

View 6 Replies View Related

OpenSUSE Install :: 11.2 Starts To Boot Then Blank Screen And Nothing?

Apr 18, 2010

I have tried two distros - Mandriva and OpenSuse. Both provide the same results, though Mandriva booted...but still the same problem, after installing blank screen comes up and nothing. Keyboard touch bad, mouse nothing happens. I would prefer openSuse but may have to switch.

Equipment:
Acer 7740 17" laptop
Intel i3-330M Chipset
4Gig DDR3 RAM 1066
Intel Integrated HD Video 128MB

Install Win7 64-Bit no issues, wiped and installed Linux and I cannot get past this blank screen. Installation works, no problem installed packages etc. When coming up on 1st boot, login - boom nothing? Searching the web and I suspect the Intel graphics are the problem but I'm not sure.

I bought this laptop to put Linux on it solely for a personal project of using Linux for a year. I'm an IT professional for 23 years and comfortable with CLI.

View 9 Replies View Related

OpenSUSE Install :: Blank Screen & Mouse After Bootup

Jul 18, 2010

I just installed 11.3 on a Toshiba Satellite A305 laptop. After going through the install process it restarted (without a full reboot I believe) and spent a very long time going through a bunch of message. E.g. it spends about 10-15 minutes building java fonts, and warning me that Japanese/Chinese/Korean might not work in Java.About 20+ minutes after bootup it finishes with all the status messages (including a message that said it couldn't execute /usr/bin/cmp !?) and goes to a blank screen with a mouse sprite -- first a spinning circle, then a regular arrow sprite. So it's not a totally black screen, but all I have is the mouse sprite.

I let it sit there for over an hour.I think it was hitting the disk but nothing happened. I tried rebooting and it did the same thing.I tried setting the "nomodeset" boot parameter, which had helped someone with a similar problem no change.I tried it in failsafe mode no change.

View 9 Replies View Related

OpenSUSE Install :: Grub - Not Able To Boot 11.3 / Screen Blank?

Aug 1, 2010

I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.

I did get a warning that GRUB over 128GB might not be able to boot.

I did enable the MBR.

GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.

I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).

View 3 Replies View Related

OpenSUSE Install :: Power Consumption With Blank Screen?

Jan 7, 2011

I have installed a new PC system

- OpenSuSE 11.3, 64bit
- AMD Phenomen II X4
- ASUS M4A88TD-V Evo/USB3
- 3 hard disks
- etc.

After start-up with runlevel 3, no applications running, network is up, the overall power consumption of the PC (without monitor) is ca. 70 Watt. After some minutes the monitor goes to power saving (terminal mode, runlevel 3 !), but the power consumption rises to 120 Watt! After pressing a key on the keyboard (e.g. Num) the monitor leaves the power save mode, shows the login screen, and the power consumption falls to 70 Watt. In parallel I have investigated the system via ssh and running top, but I have not observed any abnormal operation. I looked into /proc/acpi/* but I did not find something unusual.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved