OpenSUSE Install :: 11.3 In Intel G33 / DG31PR With Core2Duo - Can't Use Keyboard
Sep 9, 2010
I installed 11.3 Gnome 32 bit in my system twice after couple logins and updates the system freezes. I can't use keybord etc. Only option is Power off/on. It happens either during boot/during usage randomly. I posted my issue in this forum and implemented the suggestion but after couple of reboots, now it won't boot, not even in safemode. So I have decided to Install again. In the same machine I have installed Ubuntu and it's working fine without any problems from 1 week.
Well i will write this down one more time i hope you don't delete it again To enable surround sound with ALC888 on Intel DG31PR for all versions of ubuntu inluding Lucid.(this works on other distros with alsa as well) gksu gedit /etc/modprobe.d/alsa-base.conf Find this line (if there is no such line (or the file is empty) it doesn't matter just add the next line and save it)(note that on older Ubuntu versions the file is named "alsa-base" as far as i remember): # Prevent abnormal drivers from grabbing index 0
Add this line after the #Prevent abnormal drivers from grabbing index0: options snd_hda_intel model=3stack-6ch-dig Then use this command to edit pukeaudio: gksu gedit /etc/pulse/daemon.conf
Find this line: ; default-sample-channels = 2 Change it to (make sure to remove the ; in front of it): default-sample-channels = 6
i tried installing suse 11.1 on sony vio with config core2duo, 512 DDR2 ram n 80gb HDD and got th following error . being a newbie dont what the problem is.
I have a Intel server board machine that has a on board Matrox cardWith 11.2 the install barfs to text mode configuring the card during install butonce you log in a root and run sax2 it is OK once the machine restartsWith 11.3 it installs ( apparently ) perfectly then just goes to a blackscreen .. the usb keyboard is dead and that is that
I cannot install 11.3 on a machine with an intel raid controller I have tried with raid 1 using the card and then setting the disks to individual raid 0 and letting suse raid them. With the card doing it the machines crashes as soon as it tries to boot the first time, with suse doing the raid I just get 'GRUB' on the screen It seems a lot of people are having similar problems, does any one have any pointers. 11.2 installs fine. I would try and do a bug report but every time I go to the page it's in Czech
I m having problem installing the intel fortran compiler 11.1 on opensuse 11.1, Please can some1 guide me to this pls. I m a total newbie. I ve followed instructions on the web to download the noncomercial version of intel fortran compiler 11.1. I ve also managed to succesfully install it on my 32bit system, but the compiler does not seem to work when i tried to use it. i did
zypper install gcc33-32bit error: gcc33-32bit not found
so i did
zypper install gcc33 installed successfully downloaded, unpacked and installed intel
This issue is driving me nuts. I had manually modified the /etc/xorg.conf.d/50-device.conf to use intel driver, but for some unknown reason Xorg still uses framebuffer instead.
I though that I fixed the issue (by modifying device.conf) but its back after update.
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code: X.org X Server 1.8.0 Release Date: 2010-04-02 [ 15.124] X Protocol Version 11, Revision 0 [ 15.124] Build Operating System: openSUSE SUSE LINUX [ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 [Code]....
I want to change the motherboard and the CPU from an installed SUSE 10.3 Kernel 2.6.22.18-0.2-default from an AMD CPU and mother board to Intel quad Core CPU, and when I do so it doesn't boot. any idea of what can be the problem
I have server with Xeon E5620, 8 GB RAM, three 1TB hard drives which are in sw RAID 5 and two 250GB disk which are in sw RAID 1, all of this on Intel S5500BC motherboard. Installation of opensuse 11.0 11.1 11.2 and Enterprise suse 11 was successfull. After grub menu i get blank screen. It`s blank for about 60 - 120 sec and then appear Suse loading page and loading bar. This also happens if i change to text mod. But in text mod i can see what`s going on. First 5-10 lines are informations about partitions and then i get output just like on this link. Yfrog Image : yfrog.com/5nimag0108djIf i hit any key (in graph and text mode) booting will continue to opensuse loading screen and loading bar.I have tried installations on one workstation and one server and didn`t have this problem.
I should install a new openSuse 11.2 or if I should make an Update-Installation from DVD (see openSUSE 11.2 Installation Quick Start Installation Mode: Select Mode - New Installation / Update / [...]) or an Update Installation via Yast.Now I am using openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition).
Contra new installation?:
- I have an Laptop (Samsung x20) with integrated intel 915 graphic and an very hight resolution (1400x1050). The monitor's resolution is not listed in the bios of the graphic cart/solution. Because of that I had many problems with my fist installation of suse/openSuse linux.
- Will I have problems to keep my old accounts?
Pro new installation?:
- Sometimes funny system reports (mostly about ICE).
- I have been logged in as root in Gnome (as I had some problems with (no) audio, the digital optical audio out is still not running).
- I think the fist installation was a few years ago maybe I had been to often "bold".
I just upgraded my system from oS 11.2 to oS 11.3 on Thursday. I've chosen the network-CD and booted from an USB-pen-drive, as my netbook doesn't have a CD-drive.I new experience that my computer freezes obviously randomly. It's not just a programme crashing, but the whole computer just halts. Nothings working anymore - mouse is not moving, keyboard doesn't respond, I can't even switch to another tty.I tried to remember what I was doing right before the crashes. Once I used the new netbook-desktop of KDE and had typed for an application in that "cool" new desktop. The desktop wend "blank" (the application folders disappeared and I was waiting till the results were shown) and then the computer froze. Just right now I used Okular, selected some text and opened the context-menu when the computer died, the other time I closed the Yakuake with F12 and the computer didn't respond just right before the window was minimized at the top and last but not least I had that "Expose"-like window arrangement opened and clicked at the black background when everything hang up.
What could be the reason for it? oS 11.2 worked perfectly - I hadn't had any crash during 5 months of intense use. I suspected the new graphics driver, but I can't find any reported bug about the Intel 945 GMA* or anything about the new KDE 4.4.4 on atom processors.
I am running Opensuse 11.4 on a file server, based on an Intel Atom motherboard with 945G graphics chipset.I recently shut down and then rebooted the server (because I needed to switch off the power for a few minutes) after it had had been running quite happily for several weeks since the last boot. Now I cannot start X - it gives up after the line(EE) intel(0): failed to set mode: Invalid argumentI've tried googling but am none the wiser what could have caused this, or how to fix it. Excerpts from the X log file:
Just installed my first linux ever. The highest resolution I can get on my video card is 1024x768. I found out that I need to install iegd driver for my intell GM45 card. Can you tell me where I can download that driver and how I can install this?
I'm using openSUSE 11.4 KDE upgraded from 11.3. No nonstandard packages that I know of. I get this error messages on boot :
Code:
grzes@opensuse:/etc/init.d> sudo cat /var/log/boot.msg | grep '*ER*' <3>[ 2.408570] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. <3>[ 2.665563] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. <3>[ 2.668069] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. <3>[ 2.668073] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
I was wondering why is this happening. I didn't get those on 11.3.Just to add my openSUSE boots normally and seems to work as expected. My graphics card/driver combo is :
Code:
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) Subsystem: ASUSTeK Computer Inc. Device [1043:1862] Kernel driver in use: i915
I just bought a Fujitsu Esprimo P1500 computer with Windows 7 Home Premium. When I try to install OpenSuse 11.2, the keyboard works in the first screen, so I can select "Installation" with the arrow keys. But when the next screen comes up (select keyboard etc.), neither keyboard nor mouse work. Well, the CapsLock and NumLock LEDs light up, but that is all (and hitting the corresponding keys does not turn them off.)
I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.
I have two 150GB WD Raptors stripped in an INTEL ICH10R RAID0 array. Windows 7 is installed on it in a 100GB partition, there is a 150GB secondary partition, a 100MB system reserved partition created by Windows 7 and there is about 25GB unallocated space to install a linux distribution.My problem is the fake ICH10R RAID which does work only at the moment for me with Fedora Core 13 : Ubuntu 10.04 breaks it but i do not like FC13 very much. So i Googled and Googled for installation problems on this fakeraid and dmraid is involved there is a bug in it at least in Ubuntu 10.04 and openSUSE 11.2, with 11.3 my RAID is detected -> i have a MD RAID popup.
My question is : How to install properly 11.3 on the space left on my fake RAID array without breaking anything although i have a full backup of my system. I don't understand anything of the partitioning part of openSUSE in general. Do i must activate MD RAID, i tried once and my NTFS partitions were not displayed but RAID was detected with the correct size. I am totally lost with this installer.
So my netbook has overall very generic intel hardware Atom processor and Intel Graphic card the only component that requires a proprietary driver is the broadcom wireless card (unfortunately brcm40821 does not work for me) I am running opensuse 11.4 and I am willing to update the broadcom-wl driver each time there is a new kernel update in tumbleweed I am just wondering as of now, how stable is Tumbleweed (anyone has had any problem or success with tumbleweed, welcome to share in this post)
PS: I read (in the announcement/news section) with the new kernel (2.6.38-18), samba is finally working fine alongside apparmor.
So my aim is to install openSUSEx64 11.3 onto my Macbook; but for whatever reason, upon boot-up, the system won't recognize the USB thumb drive with the expanded image of openSUSE on it. I followed steps in Terminal to expand the image onto the said USB stick and know it worked properly because Terminal said "Process Completed." Do I need a special type of USB thumb drive or am I missing something? I am using a late-2009 Macbook. By the way, these were the steps used to prep the USB thumb stick:
1. Open a Terminal (under Utilities) 2. Run diskutil list to get the current list of devices 3. Insert your flash media 4. Run diskutil list again and determine the device node assigned to your flash media (e.g. /dev/disk2) 5. Run diskutil unmountDisk /dev/diskN 6. Execute sudo dd if=/path/to/downloaded.img of=/dev/diskN bs=1m 7. Run diskutil eject /dev/diskN and remove your flash media when the command completes
similar issue to Keyboard and mouse deactivated while installing - openSUSE ForumsI am installing from OpenSuse Linux 11.2 DVD. After I hit install, the screen with keyboard layout choice comes up, but neither my mouse nor my keyboard work on that screen (they did work until that screen)I have Vista and Win7 installed on separate partitions. My keyboard is a logitech S520 and mouse LX5, both wireless, connected to a USB portI did try to connect a wired keyboard and mouse over USB (front ports), did not work.
I have a weird situation. After installing openSUSE 11.2 on a machine it has no response to the keyboard and mouse. I then installed Mandriva 2010 on the machine and the keyboard and mouse work.
I just installed the new OpenSuSE 11.2 release and after coming up in graphical mode the keyboard and mouse are not responding at all.
After that via a remote login force the machine back to runlevel 3 and this makes it able to login to the console and trying to start sax2 to make a new X configuration.
Well it doesn't read the old configuration but gets stuck as well.
I am quite experienced in installing openSUSE. (I used it for many years.) But the problem showed below tricks me out.
I just tried to install openSUSE 11.2. In initmode 3 the keyboard works well. Everything worked well up to the moment I started runlevel 5. In XWindows Modus, the keyboard and the mouse are disabled. And I cannot get back to any other Virtual console.
When I started sax2, I get something (in the file /var/log/Sax.log) or both mouse and keyboard like this:
It indicates , mouse and keyboard are disabled.
Here are my questions:
How can I ENABLE my keyboard and my mouse?
Where is the file that configures sax2?
Do I have to set ("on") the AutoAddDevices? or to "off"
I have just update from 11.1 to 11.2 and after reboot system hangs when arrives to the screen where all users logins are showed. I run the installation again in repair mode. Everything correct. Started system again in Level 3, login as one of the users and run startx. It starts the desktop but no keyboard or mouse is working. Started system again in level 3, login as root, started gdm and same results. It arrives to the login screen for the different users and keyboard and mouse does not work. System seems to be running as clock in the right down works.
Started system again in Level 3, login as root, run SaX2 and same results: no keyboard no mouse. I am running gnome desktop with last image downloaded openSUSE-11.2-DVD-i586.iso. it seems to be something related to bug in OpenSuse 11.2 Milestone 7: (Bugs:Most Annoying Bugs 11.2 dev - openSUSE) HAL may crash, leaving XOrg without keyboard and mouse (Bug #537452), work-around: update with 'hal' package from Base:System
