OpenSUSE Install :: Editing Partitions Affect Booting Process?

Jan 20, 2011

I have a dual boot system on a 500GB HDD. Here is a printscreen of the partition table for the disk. It's a fairly standard set-up but the root partition is almost full (I know it's fairly unheard of but I have a lot of software provided by uni that takes up a lot of space). I would like to shrink my /home partition and increase the root one. I've downloaded gparted and got it onto a live CD. The only thing I really want to know before I go ahead is how will the editing of the partitions affect booting.

From what I can tell from reading is that the MBR has only got listed the place on the HDD where the bootable partitions start. These starting placed will not be affected by the alteration, so will the system quite happily boot in the same manner? One booted I'm assuming as the /home partition will have moved I'll need to alter fstab to mount /home again. Will having /home missing caused any adverse affects on the first boot into linux?

View 3 Replies


ADVERTISEMENT

OpenSUSE Install :: Remove Windows Partitions - Keep Booting

Jun 4, 2010

in my case, to delete primary and secondary win partitions (C and D) and so to add that empty spaces to my current openSUSE / and /home partitions. My linux root partition is a primary one as well so I guess that I can keep booting from it no matter if there isn't the C win drive any more.

Code:
Disco /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3bef74b8
[Code]...

View 4 Replies View Related

OpenSUSE Install :: Installation Of 11.3 - Damaged Windows Partitions And Now Not Booting Up

Oct 17, 2010

While installation of openSUSE on machine already having winXP and Ubuntu, I chose "Edit partition setup", I also chose GRUB: change locaiton to "MBR" enabled installation summary was something like this, shrinking sda1 to 13.02 and sda5 to 12.3 Gb, swap partition to sda3 (old linux), root partition to sda6(old linux), then began installation, and after sometime, while shrinking done with sda5, when started with sda1, it showed the following error- Failure occured during following action: Shrinking partition /dev/sda1 to 13.03 GB (progress bar might not move) System error code was: -3027. Now, currenly, i am not able to have my winXp back, during booting it shows: error: no such partition grub rescue>_

View 7 Replies View Related

OpenSUSE Install :: Access Partitions From Vista - Can't Open Ext3 Partitions

Jan 9, 2010

I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.

View 3 Replies View Related

Ubuntu :: Editing Partitions By Hand?

Apr 26, 2010

I am looking to set up a separate /home partition and am getting somewhat confused. On an old system I practised resizing the partitions and feel reasonably confident in the mechanics.

Currently my drive is /dev/sda1 an ext4 file system with a mount point of / ;
/dev/sda2 and extended partition and /dev/sda5 a linux swap.

I propose to reduce the sda1 to about 10GiB for Karmic and allocate the bulk of the remainder to /home. It is this point that I start to have difficulty. I have seen screen shots which show a mount point of /home and for the life of me I have been unable so far to see how this is created. This has been further confused when looking at the subject in my latest copy of Linux Format (132) where it shows an example where dev/sda1 if NTFS, sda2 as ext3 and a mount point of /home, sda3 as ext4 and mount point of / finally sda4 being a Linux swap.

I wish at the end of the day to have Karmic as my OS with a separate /home partition with the view that once Lucid has settled down that I adopt it.

What I would like to know is how having reduced sda1 do I proceed. As sda1 is an ext4 file system should the /home be also ext4 or like the example in the magazine of ext3? How is the mount point for /home named? Finally should I attempt to have /dev/sda number sequentially or let things stick as at present I imagine that if I delete the current extended and swap before reducing the /dev/sda1 then that should get things to run in sequence.

I intend to use a live DVD to let me work with the partitions as this should be safer than messing about with my current partitions when mounted.

View 8 Replies View Related

OpenSUSE Install :: Gnome Menu Editing In Suse 11.2?

Dec 4, 2009

I've just installed suse 11.2 with gnome. Now I need to modify entries in the applications menu, mainly so blender starts in windowed mode. Right click on applications will let you hide an entry, not modify it. Right clicking on the suse computer menu won't even allow that. If I could find the file(s) which hold the actual data I could modify as required, but where are they?

View 3 Replies View Related

OpenSUSE Install :: 11.2 W/ KDE 4.3 [i586]: Editing The Startup Script Manually?

May 15, 2010

I'd just installed a *nix antivirus called Avrira Antivir (from downloaded script & installation files), but it completely froze my system when I tried to start it, and the system freezes at the login screen; which is probably because I selected the option of running it automatically upon startup...So here's the deal: I know that I can run a live Linux usb to mount my current fs, then edit the file(s) that load the Avira processes on startup, but I don't know what these files are, much less which directories they are in!

View 8 Replies View Related

Ubuntu Installation :: GeeXboX With 9.10 - Dual Booting And Editing Grub2?

Feb 8, 2010

9.10 uses GRUB2, so the instructions below are obsolete. Is there anyone here who could provide instructions for adding Geexbox into the GRUB2 menu? If you already have a Linux OS installed on your system, you might just want to add a GeeXboX entry to your existing bootloader. This allow you to install GeeXboX very easily. From GeeXboX CD, simply copy the GEEXBOX folder into your Linux / partition (we suppose it to be /dev/sda1 here).

Modify the /boot/grub/menu.lst file to add:
title GeeXboX
root (hd0,1)
kernel /GEEXBOX/boot/vmlinuz root=/dev/ram0 rw rdinit=linuxrc boot=UUID=$my_uuid lang=en keymap=qwerty splash ...
initrd /GEEXBOX/boot/initrd.gz
quiet

Just take are about two things:
- the field root (hd0,1) is to be adapted according to the rest of your GRUB's configuration.
- the $my_uuid value is the unique ID of your partition. Check within your GRUB config file, which value is set for other OS on the same partition or use ls -l /dev/disk/by-uuid/ to see which uuid matches your partition.

View 2 Replies View Related

OpenSUSE Install :: Can`t Install Suse 11.3 - Every Time System Shut Down In Install Process

Jan 30, 2011

I tried to install suse 11.3 but every time the system shut down in the install process it never finish

I think that the FAN does not work

I have an Acer Aspire 5720z

View 3 Replies View Related

OpenSUSE Install :: Overlapping Partitions With Fresh Opensuse 11.3 Install

Aug 4, 2010

After a fresh install of opensuse 11.3 x86_64, using a NET install CD, I noticed that the boot disk layout has overlapping partitions. I've noticed one other post that mentioned this at the very end. Is this a known problem already? Or is there something I'm missing that makes this okay?

View 9 Replies View Related

Fedora Security :: Reset The Root Password By Booting Into Single Usermode By Editing Grub

Apr 17, 2009

Being able to reset the root password by booting into single usermode by editing grub. This is a MAJOR flaw. I know it makes no real difference against internet bourne attacks, but even so I must say I found it shocking. The only way I've found to stop this is to encrypt the entire HDD, so noone could get into single user mode without first knowing the encryption key/password.

View 14 Replies View Related

OpenSUSE Install :: 11.4, Gnome 3 New Install / No NTFS Partitions Detected?

Apr 24, 2011

I've just installed 11.4 and then updated to gnome 3. I've noticed that Nautilus doesn't appear to mount my windows NTFS partition. I find this odd because both Ubuntu and Fedora detect and mount it just fine in Gnome 3 (I've been trying all 3 this week).

View 7 Replies View Related

OpenSUSE Install :: OpenSuse 11.2 Cant Create Partitions On RAW Partition?

Dec 8, 2009

I did shrinking of windows drive to give 10 gb raw space for OpenSuSe 11.2 installation on my T60 laptop.OpenSuSe installer failed to create partitions out of single 10 gb RAW partition.Is there any other way to slice single RAW partition in to / , /home & swap?

View 3 Replies View Related

OpenSUSE Install :: 11.2 DVD Cannot See Any Partitions

Dec 9, 2009

I had a Windows 7 RC/openSUSE 11.1 dual-boot on this computer running on RAID 1. When I installed Windows 7 final, somehow it screwed up my RAID 1. I fought with it for a while, but decided to wipe the logical drive, and then go into BIOS and disable RAID. I reinstalled Windows 7 on the HDD, but I have no RAID now. BIOS shows 4 SATA drives. Windows sees all of them just fine. But the openSUSE 11.2 install DVD can't see any partitions on sda, sdb, sdc or sdd. It however says I still have two RAID logical drives, which I don't. I'd really like to install openSUSE 11.2, but I want it to recognize my Windows partitions, if for no other reason that to see my MP3 collection, my eBooks, etc.

View 8 Replies View Related

OpenSUSE Install :: Can't Format Partitions / What To Do?

Apr 10, 2010

I have a pretty weird problem, which is that I can't format any partitions anymore.

It started when my laptop suddenly froze and I killed it (I just ran FF, IRC client, Kopete, ... and I think the last thing I did was plugging in a USB drive). When I wanted to boot the machine again it gave me a lot of errors that the root and the home partitions are both corrupted.

Repairing the system with the DVD didn't help at all and finally I removed all the partitions to reinstall the whole system.

During the installation it can create the partitions, but it can't format them with ext4.

I tried to format the partitions with a live CD and YaST Partioner and the same problem showed up code...

View 9 Replies View Related

OpenSUSE Install :: How To Make LVM - Partitions

May 24, 2010

Texts about partitioning with LVM are quite technical.However I should like to find a text explaining me how to manually make LVM-partitions in OpenSuSE. Like which ones, how big, how to do it. I made an auto LVM with /home. Problem is my entire disk is not used (/root was 5GB max /home was only 7GB max on sda2)and I was not able to make the partitions the seize I wanted.

I have now sda1 configured as /home 280GB and sda2 with the proposed partitioning of Yast. So only 5,9 GB for root. It looks like my try-out is working fine, however. Using normal partitioning is not a good option on my PC. He shows lots of black screens. With LVM no problem at all.

View 9 Replies View Related

OpenSUSE Install :: Any Way To Join Partitions

Oct 7, 2010

Since i first installed my openSuse 11.2 on the laptop, I didn't know how much space I'd need for this OS to run. Now I've encuntered the worst - The root prartition is 6GB big and it might run out of space shortly (700MB left).I had Win XP on it but as soon as I learned openSuse to make basic tasks - i removed the ntfs partition.The HDD is 28GB, I have 6GB root, 7,5GB home, 750MB swap (512MB RAM) ans 14,65GB free space off the deleted NTFS.Is there any way to join the partitions, so the root can be 16GB in space and home around 12GB?

Or maybe just make another second /home partition and use a program to allocate the "missing bytes" from root to another partition if it runs out of space?

View 9 Replies View Related

OpenSUSE Install :: 11.3 /dev/sda Missing In Partitions?

Aug 22, 2011

I have an acer travelmate 632 running 11.3.The grandkids have been playing playing frozen bubble in fullscreen mode but the "full screen" was actually only the central part of the monitor.Yesterday, there were a bunch of updates. Today, the kids again played frozen bubble but this time, the "full screen" was really the full screen, not the sub-window. After exiting the game, a window popped up telling me that a monitor had been disconnected and would I like to reconfigure. I said yes.

After reboot, the graphical login failed saying that a serious error had been encountered and that I should consult the KDM logs. I went to console mode but was unable to log in. Neither as root or as the regular user. Both fail with "Login incorrect". In fact, the only way in now is via single-user mode.

Looking through the /var/log/messages, I see a curious set of mesages complaining the, for instance, "/dev/sda4 is not in PARTITIONS" note the upper-case. I then see that, despite what "mount" tells me, ?home (sda4) and /boot (sda1) are not mounted. That is, I cannot list their contents. If I manually mount those partitions, I can list their contents.

View 4 Replies View Related

Ubuntu :: Booting - No Activated Partitions

Jul 28, 2010

Haven't been able to boot here lately. Installed Lucid Lynx via Wubi. Tried reinstalling grub, with no avail. Tried using Lilo and now it says I have no activated partitions. I can only boot if I use a LiveCD or Super Grub Disk to find my Windows XP Loader. Here is my results.txt from the boot info script:

[Code]...

View 3 Replies View Related

OpenSUSE Install :: How I Should Be Setting Up Partitions On Install

May 5, 2010

I'm running WIN 7 and trying to dual boot with 11.2--the install goes fine until I get to partitioning. Then I get this message: Del windows partition /dev/sda1 Resize impossible due to inconsistent FS try checking FS under windows.Del/dev/sda3 Del Windows /dev/sda5.Then it wants to install extended, swap and root. I tried to resize the partition prior to intalling SuSE with paragon partition manager which failed.Could someone tell me how I should be setting up the partitions on install please.

View 7 Replies View Related

OpenSUSE Install :: Partitions Not Found At Install?

May 22, 2011

I'm trying to migrate from Ubuntu but I'm stuck at partitioning part of the installation... The problem is that the partitions are not recognized (I have NTFS + EXT3). I see only /dev/sda and it says it's unpartitioned When installing Ubuntu I had similar problem and I was solving it by removing dmraid.

View 9 Replies View Related

OpenSUSE Install :: How To Remove Partitions Through Windows

Mar 17, 2010

I am dual booting Windows 7 & Suse 11.2 and want to uninstall Suse. I know how to remove the linux partitions through windows but need help to first remove the Grub bootloader installed through Yast to enable windows to boot from mbr.

View 6 Replies View Related

OpenSUSE Install :: Writing Into NTFS Partitions

Apr 3, 2010

I'm new to OpenSuse 11.2, In Yast partitions configurations, I've mounted all NTFS partitions successfully without ticking "read-only", and according to this webpage: NTFS - openSUSE I checked my fstab file, there's no "-ro" in the file. But I still couldn't write to any mounted NTFS partitions, I can't do paste file, can't save changed files into NTFS partition.

View 3 Replies View Related

OpenSUSE Install :: Remove Whole Partitions Entries?

Oct 15, 2010

I have to hide Unix partitions to succeed in installing Linux and the winner is Ubuntu 10.10! I had to remove whole partitions entries. DOS based primary/logical partitions are now called (hd0,msdos1), (hd0,msdos2), etc. And BSD slices would have been (hd0, bsd1) (hd0,bsd2). I guess I saw those names during installation. update-grub failed in three attempts in a row on 2 machines (32 and 64 bit). Everything went fine after I removed the Unix partitions (which are going to be restored by openSUSE legacy Grub)

View 9 Replies View Related

OpenSUSE Install :: Partitions Not Shown In Nautilus?

Mar 24, 2011

I would like to know i can i have my partitions shown in Nautilus and gnome-panel. In openSuse 11.3 they appear automatically but now in 11.4 they don't...

View 6 Replies View Related

OpenSUSE Install :: Partitioning & Booting - (grub Won't Install On The Pci Express Card As It Is A Raid0 Array)

Jun 11, 2011

I am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??

View 1 Replies View Related

OpenSUSE Install :: Vista / Opensuse Dual-booting With GRUB

Jan 22, 2011

I installed Opensuse 11.3 on a separate partition to vista on my Acer 5115. It runs fine but the GRUB boot loader failed to show the Vista OS. I tried to add it by editing menu.As far as I can see (and I don't have much experience with these things) the Vista OS is there, on sda5, but doesn't boot correctly because the winload.exe is in the wrong directory. Why the sdax numbers are all rearranged is a mystery too, but I have reinstalled vista several times so that could be why.I don't have a vista recovery cd (wasn't given one), is there any way to fix this within opensuse (which works fine)?

View 9 Replies View Related

Software :: Booting Different Partitions On Usb Drive With Syslinux

Mar 19, 2010

I have an 8gb usb flash drive that I had high aspirations of using for a recovery/install/messing around multipurpose drive.

fdisk shows:

Code:
$ sudo fdisk -l /dev/sdb
[sudo] password for woodnt:
Disk /dev/sdb: 8036 MB, 8036285952 bytes
255 heads, 63 sectors/track, 977 cylinders

[Code].....

View 4 Replies View Related

OpenSUSE Install :: Booting After 11.3 Install - Hangs At A Blank Screen ?

Jun 8, 2011

I recently tried to upgrade my openSuSe 11.1 system using the instructions at:

SDB:System upgrade - openSUSE

I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?

View 9 Replies View Related

OpenSUSE Install :: Windwows 7 Installing Partitions Deleted

Dec 28, 2009

I have Installed windows 7 over windows xp in the first partition (primary) and I lost linux partitions and there are two ntfs partitions didn't deleted.want to recover linux partiotns becose they have important data ,or recover files from deleted partitions.used opensuse DVD trying to recover grub but it says there are no linux partitions.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved