I'm trying to migrate from Ubuntu but I'm stuck at partitioning part of the installation... The problem is that the partitions are not recognized (I have NTFS + EXT3). I see only /dev/sda and it says it's unpartitioned When installing Ubuntu I had similar problem and I was solving it by removing dmraid.
View 9 Replies
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies View RelatedI've just installed 11.4 and then updated to gnome 3. I've noticed that Nautilus doesn't appear to mount my windows NTFS partition. I find this odd because both Ubuntu and Fedora detect and mount it just fine in Gnome 3 (I've been trying all 3 this week).
View 7 Replies View RelatedAfter a fresh install of opensuse 11.3 x86_64, using a NET install CD, I noticed that the boot disk layout has overlapping partitions. I've noticed one other post that mentioned this at the very end. Is this a known problem already? Or is there something I'm missing that makes this okay?
View 9 Replies View RelatedI'm running WIN 7 and trying to dual boot with 11.2--the install goes fine until I get to partitioning. Then I get this message: Del windows partition /dev/sda1 Resize impossible due to inconsistent FS try checking FS under windows.Del/dev/sda3 Del Windows /dev/sda5.Then it wants to install extended, swap and root. I tried to resize the partition prior to intalling SuSE with paragon partition manager which failed.Could someone tell me how I should be setting up the partitions on install please.
View 7 Replies View RelatedI would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
*edit Nevermind I think I found it on YAST * I have been having trouble finding the "make command":If 'make' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf makeI need to install 'make', 'g++', and all other building tools for suse.
View 2 Replies View RelatedI've been using Suse on my 7 year old computer for years but now have a shiny new Dell Inspiron 570 MT with AMD Athlon? II X4 630.I thought that I should try the 64 bit version of Suse 11.2 on the new machine and it now dual boots, but I have an ethernet problem.Yast tells me:NetLink BCM57788 Gigabit Ethernet PCIe (Not connected)BusID : 0000:02:00.0Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details.I searched for 'eth' in dmesg output without success but found 'net' in this section:
[ 0.380308] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.380310] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.380401] NET: Registered protocol family 2
[code]...
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
I'm trying to do a network installation of opensuse 11.2 on my ASUS eee 701.
- I've downloaded the ISO image, verified it with md5sum, and burned it to CD.
- I've used a live CD and fdisk to create a new partition table on the internal SSD (/dev/sda) and a single primary partition of type 83.
- I've booted the CD, changed the language to English[UK], and continued.
The installer then told me that there's not enough memory for a graphical installation. This is weird because my ASUS has 1MB of memory and works fine with a live CD, but it's not much of a problem because I'm comfortable with text-based installation.
The real problem is that the installer froze on the next screen while "searching for Linux partitions". I aborted after about 10 minutes of inactivity.
I don't really want to download the entire DVD because I've only got 4GB of SSD and want to set up a trimmed-down system.
I had a Windows 7 RC/openSUSE 11.1 dual-boot on this computer running on RAID 1. When I installed Windows 7 final, somehow it screwed up my RAID 1. I fought with it for a while, but decided to wipe the logical drive, and then go into BIOS and disable RAID. I reinstalled Windows 7 on the HDD, but I have no RAID now. BIOS shows 4 SATA drives. Windows sees all of them just fine. But the openSUSE 11.2 install DVD can't see any partitions on sda, sdb, sdc or sdd. It however says I still have two RAID logical drives, which I don't. I'd really like to install openSUSE 11.2, but I want it to recognize my Windows partitions, if for no other reason that to see my MP3 collection, my eBooks, etc.
View 8 Replies View RelatedI have a pretty weird problem, which is that I can't format any partitions anymore.
It started when my laptop suddenly froze and I killed it (I just ran FF, IRC client, Kopete, ... and I think the last thing I did was plugging in a USB drive). When I wanted to boot the machine again it gave me a lot of errors that the root and the home partitions are both corrupted.
Repairing the system with the DVD didn't help at all and finally I removed all the partitions to reinstall the whole system.
During the installation it can create the partitions, but it can't format them with ext4.
I tried to format the partitions with a live CD and YaST Partioner and the same problem showed up code...
Texts about partitioning with LVM are quite technical.However I should like to find a text explaining me how to manually make LVM-partitions in OpenSuSE. Like which ones, how big, how to do it. I made an auto LVM with /home. Problem is my entire disk is not used (/root was 5GB max /home was only 7GB max on sda2)and I was not able to make the partitions the seize I wanted.
I have now sda1 configured as /home 280GB and sda2 with the proposed partitioning of Yast. So only 5,9 GB for root. It looks like my try-out is working fine, however. Using normal partitioning is not a good option on my PC. He shows lots of black screens. With LVM no problem at all.
Since i first installed my openSuse 11.2 on the laptop, I didn't know how much space I'd need for this OS to run. Now I've encuntered the worst - The root prartition is 6GB big and it might run out of space shortly (700MB left).I had Win XP on it but as soon as I learned openSuse to make basic tasks - i removed the ntfs partition.The HDD is 28GB, I have 6GB root, 7,5GB home, 750MB swap (512MB RAM) ans 14,65GB free space off the deleted NTFS.Is there any way to join the partitions, so the root can be 16GB in space and home around 12GB?
Or maybe just make another second /home partition and use a program to allocate the "missing bytes" from root to another partition if it runs out of space?
I have an acer travelmate 632 running 11.3.The grandkids have been playing playing frozen bubble in fullscreen mode but the "full screen" was actually only the central part of the monitor.Yesterday, there were a bunch of updates. Today, the kids again played frozen bubble but this time, the "full screen" was really the full screen, not the sub-window. After exiting the game, a window popped up telling me that a monitor had been disconnected and would I like to reconfigure. I said yes.
After reboot, the graphical login failed saying that a serious error had been encountered and that I should consult the KDM logs. I went to console mode but was unable to log in. Neither as root or as the regular user. Both fail with "Login incorrect". In fact, the only way in now is via single-user mode.
Looking through the /var/log/messages, I see a curious set of mesages complaining the, for instance, "/dev/sda4 is not in PARTITIONS" note the upper-case. I then see that, despite what "mount" tells me, ?home (sda4) and /boot (sda1) are not mounted. That is, I cannot list their contents. If I manually mount those partitions, I can list their contents.
I am dual booting Windows 7 & Suse 11.2 and want to uninstall Suse. I know how to remove the linux partitions through windows but need help to first remove the Grub bootloader installed through Yast to enable windows to boot from mbr.
View 6 Replies View RelatedI'm new to OpenSuse 11.2, In Yast partitions configurations, I've mounted all NTFS partitions successfully without ticking "read-only", and according to this webpage: NTFS - openSUSE I checked my fstab file, there's no "-ro" in the file. But I still couldn't write to any mounted NTFS partitions, I can't do paste file, can't save changed files into NTFS partition.
View 3 Replies View RelatedI have to hide Unix partitions to succeed in installing Linux and the winner is Ubuntu 10.10! I had to remove whole partitions entries. DOS based primary/logical partitions are now called (hd0,msdos1), (hd0,msdos2), etc. And BSD slices would have been (hd0, bsd1) (hd0,bsd2). I guess I saw those names during installation. update-grub failed in three attempts in a row on 2 machines (32 and 64 bit). Everything went fine after I removed the Unix partitions (which are going to be restored by openSUSE legacy Grub)
View 9 Replies View RelatedI would like to know i can i have my partitions shown in Nautilus and gnome-panel. In openSuse 11.3 they appear automatically but now in 11.4 they don't...
View 6 Replies View RelatedI did shrinking of windows drive to give 10 gb raw space for OpenSuSe 11.2 installation on my T60 laptop.OpenSuSe installer failed to create partitions out of single 10 gb RAW partition.Is there any other way to slice single RAW partition in to / , /home & swap?
View 3 Replies View RelatedAlright, first I burned the image I download to a DVD, first DVD didn't work, but second one did, got to the installation process where it probes everything... and at the end it said "Repository Not Found"..So I copied the image to my external hard drive..And went to install from Hard drive...did the director of the image by just putting openSUSE-11.4-DVD... etc...because it already does hd:I had tried F: before, and it didnt work either..And yet again, I get "repository not found"....btw, THIS IS FROM CLEAN INSTALL< I HAD TO ERASE XP and the external is a NTFS hard drive with about 12 gb's free.
View 9 Replies View RelatedI have Installed windows 7 over windows xp in the first partition (primary) and I lost linux partitions and there are two ntfs partitions didn't deleted.want to recover linux partiotns becose they have important data ,or recover files from deleted partitions.used opensuse DVD trying to recover grub but it says there are no linux partitions.
View 9 Replies View RelatedI have Windows XP and OpenSuSE 11.1 installed on my laptop. I have recently removed the recovery partition provided by the laptop manufacturer (HP) to free up some space and ideally I would like to be able to add the free space to the existing Windows partition.The current partition set up is as follows:
Code:
Disk size 93Gb, P = Primary, L = Logical, U = Unallocated
P Windows XP 36Gb /dev/sda1 /windows
[code]...
I have been using GHOST for quite a few years to back up my Windoze partitions from NTFS to a series of images on a fat32 partition. I usually boot off a DOS7 bootable CD and simply ghost over to the fat32 partition.
I am rebuilding my laptops and desktops to dual boot Windows7 and Suse 11.2
My goal is to create restore images from my NTFS and ext3 partitions into directories on the fat32 partition for a restoration to my "gold baseline" build after any corruption.
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
1 = Windows-7
2 = /boot
3 = swap
5 = /
6 = /fat32
[Code]....
I can't edit the partitions in the install setup. When I go tyo the Expert Partitioner, I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices:* /dev/md126 with 465.76 GB, not encrypted, type RAID1 (no info for chunk size, parity or file system)* /dev/md127 with 2.2 MB, not encrypted, RAID_UNKNOWN (no info for chunk size, parity or file system)I didn't try to do anything in the RAID part because I wanted to preserve Win 7, but I dared to add a partition in the "hard disk" (sda) and I get an error: "the disk is in use and cannot be modified".
The behavior of Ubuntu 9.1 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.
GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched.y assure me that it is a "plain vanilla" ("next, next, next") installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.
in my case, to delete primary and secondary win partitions (C and D) and so to add that empty spaces to my current openSUSE / and /home partitions. My linux root partition is a primary one as well so I guess that I can keep booting from it no matter if there isn't the C win drive any more.
Code:
Disco /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3bef74b8
[Code]...
in attempt to dualboot w7 and opensuse i manage to screw windows boot loader. I was hoping that with opensuse live cd i'll successfully save my data but i was wrong. I can't browse any of partition with any of browsers inside liveCD including dolphin. When i try to access it says: There is no application installed that can open files of the type block device (inodelockdevice). Do you want to try to install one? Is there another option to access partitions because I can't install another browser on live cd.
View 2 Replies View RelatedOn my triple-boot PC:
Code:
SuLinux:~ # fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
Will the above procedure accomplish this objective, without crippling openSUSE ? The second swap partition has never shown any activity (on SUSE). I understand (from Using shared swap files) that a single swap partition may be shared. Since these areas are relatively small, It is not inconvenient to maintain separate swap partitions.
i have Windows XP and OpenSuse on my harddrive (dualboot) my problem is i cannot see my Windows-partitions when running Suse, i need to have access to those partitions and i cannot find how to do that.
View 9 Replies View Related
