OpenSUSE Install :: Installation Of 11.3 - Damaged Windows Partitions And Now Not Booting Up
Oct 17, 2010
While installation of openSUSE on machine already having winXP and Ubuntu, I chose "Edit partition setup", I also chose GRUB: change locaiton to "MBR" enabled installation summary was something like this, shrinking sda1 to 13.02 and sda5 to 12.3 Gb, swap partition to sda3 (old linux), root partition to sda6(old linux), then began installation, and after sometime, while shrinking done with sda5, when started with sda1, it showed the following error- Failure occured during following action: Shrinking partition /dev/sda1 to 13.03 GB (progress bar might not move) System error code was: -3027. Now, currenly, i am not able to have my winXp back, during booting it shows: error: no such partition grub rescue>_
View 7 Replies
ADVERTISEMENT
Jun 4, 2010
in my case, to delete primary and secondary win partitions (C and D) and so to add that empty spaces to my current openSUSE / and /home partitions. My linux root partition is a primary one as well so I guess that I can keep booting from it no matter if there isn't the C win drive any more.
Code:
Disco /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3bef74b8
[Code]...
View 4 Replies
View Related
Jan 20, 2011
I have a dual boot system on a 500GB HDD. Here is a printscreen of the partition table for the disk. It's a fairly standard set-up but the root partition is almost full (I know it's fairly unheard of but I have a lot of software provided by uni that takes up a lot of space). I would like to shrink my /home partition and increase the root one. I've downloaded gparted and got it onto a live CD. The only thing I really want to know before I go ahead is how will the editing of the partitions affect booting.
From what I can tell from reading is that the MBR has only got listed the place on the HDD where the bootable partitions start. These starting placed will not be affected by the alteration, so will the system quite happily boot in the same manner? One booted I'm assuming as the /home partition will have moved I'll need to alter fstab to mount /home again. Will having /home missing caused any adverse affects on the first boot into linux?
View 3 Replies
View Related
Mar 17, 2010
I am dual booting Windows 7 & Suse 11.2 and want to uninstall Suse. I know how to remove the linux partitions through windows but need help to first remove the Grub bootloader installed through Yast to enable windows to boot from mbr.
View 6 Replies
View Related
Jun 24, 2010
Im deleting som big files and in Dolphin and it says my Trash is full, but if i try to empty trash is says that is can't find any files.So it think its full, but files are gone.How can i repair this? It should be a selection "Permanent delete" in Dolphin, so it doesnt move it to trash.
View 4 Replies
View Related
Nov 27, 2010
i have Windows XP and OpenSuse on my harddrive (dualboot) my problem is i cannot see my Windows-partitions when running Suse, i need to have access to those partitions and i cannot find how to do that.
View 9 Replies
View Related
May 20, 2010
I have been dual-booting Vista and openSUSE 11.2 until my SUSE install is fully functional and now and I want rid of Vista and to reclaim the space for Linux.
Code:
fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x28000000
[Code].....
sda2 and sda3 are the Vista partitions. sda2 is a recovery partition and sda3 is the main partition. All data is safely copied from sda3 and now I want to reformat them for SUSE. I not bothered about partition resizing i.e. I am happy to just have the sda2/sda3 space available to SUSE and mount them somewhere.
1) Do I need to do anything about the boot table first or can I just reformat sda2 & sda3?
2) How should I format sda2/sda3? I'm guessing I need to unmount them and then format. Should I use ext4 or something else? Which command/tool should I use?
View 9 Replies
View Related
May 2, 2010
I found this tutorial about dual booting Suse 11.0 & XP. Is it suitable also for Suse 11.1 & win7, or should I find another tutorial? Can you recommend a good tutorial for dual-booting Suse 11.1 & Win7 ? I've searched a lot but didn't find any.
View 2 Replies
View Related
May 13, 2010
I installed new OpenSuse11.2 but the windows(vista-64 bit) booting are missing
View 9 Replies
View Related
Apr 17, 2010
My Laptop Config is as follows.
Compaq Presario V3700
AMD Turion64
2GB Ram
Windows Partitions
/dev/sda1 == C: (WINDOWS)
/dev/sda2
[Code]...
I have been carrying out updates of both Vista & SuSE whenever i operate in them.
One (Not So) Fine Day, when i Choose from the Grub loader "Microsoft Windows Vista SP2" option it just din't boot into Vista. I have Tried many a time.
My First doubt was towards Vista only, so i choose the "Windows Recovery Mode" option from Grub. It went into the Recovery mode. I ran Memory Tests on Windows Partition, took its own sweet time, whatever missing indexes and all it carried out and finally gave the Thumbs Up result. After that, i carried out Startup Repairs, all came out well. So, Yet again i restarted and tried to get in Vista. Nope, dint work.
View 9 Replies
View Related
Sep 8, 2010
I am currently running windows 7, i would like to be able to dual-boot with openSuse 11.3 64-bit, at the moment I have two seperate partitions each 111gb in size and i wish to install suse onto the D: partition without effecting my windows installation or any data on the c drive.
When i got to the "Discs" stage of the installation i was very confused by this as i am completely new to Linux and dual-booting, i thought it would be a simple case of selecting my d: drive and installing straight to that but i cannot work out how to do this.
View 7 Replies
View Related
Aug 4, 2011
I am having problems with triple booting my system. The original Linux OS I started out with was Ubuntu, which I was able to triple boot in the desired configuration (Mac OSX, Unbuntu, and Windows XP) after several tries (the instructions I got weren't quite right). I am now trying to install openSUSE instead of Ubuntu. However, if I install openSUSE before Windows XP, Windows XP erases my installation. If I install it afterwards, it seems to erase Windows XP, as it becomes unbootable thereafter. Perhaps this is because I am following the instructions for installing Ubuntu (format partition 3 as Ext3, mount it as /, and install the grub boot loader inside that partition), without modifying much else. I can't seem to find any good instructions online to tell me what else to do.
the instructions on installing Ubuntu screwed up because it said I had to install Windows XP first, before installing Ubuntu. I found out it was the other way around. Also, while Ubuntu was installed, all three partitions showed up on disk utility (although the Linux partition wasn't a recognized file system). However, every time I've installed openSUSE, where the partition should have been showed up as empty space on disk utility.
View 9 Replies
View Related
Feb 9, 2011
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies
View Related
Oct 11, 2010
I'm trying to install Ubuntu 10.10 in a desktop computer with three disks. SDA with NTFS in SDA1, where I have Windows XP, SDB where I had Ubuntu 10.04, and SDC where I have an NTFS partition. I want to install Ubuntu 10.10 in SDB without loosing the data in SDA and SDC. When I try to install it, when I choose specify manual partition, I only find this: Where is SDB abd SDC? What do I choose in Device for Boot Loader Installation?
View 2 Replies
View Related
Jun 14, 2011
I recently did a fresh install of ubuntu 11.04 and seemed to have made a mistake with re-partitioning perhaps? I cant boot into windows anymore. I know all files are still there and intacct as I can access them from Ubuntu, but Something is wrong with the Booting of Windows now. I get to a screen which gives me system recovery options. When I perform the startup repair it scans for a few secnds and comes up with an error message "...System volume on disk is corrupt. Repair action: File system repair (chkdsk)...error code 0x1f" I even seems to have access to files on windows from this screen when I try a "Windows Complete system restore" It gives me the option to look on the hard drive or on a disk (I only have a Toshiba windows 7 upgrade disk and it doesnt seem to be helping)
View 9 Replies
View Related
May 6, 2011
i've just got my gateway laptop which has a recovery option. Due to my observation, the computer has 3 primary partitions when I firstly got it: 12.7 GB, whose property is system recovery (empty and hidden); 100MB whose properties are ACTIVE, primary partition; partition C whose properties are BOOT, system, primary partition, crash dump and page file. Seems that when the machine starts, it firstly read the 100MB partition and then it is leaded to the partition C, where the windows 7 is installed. I SHRINKED THE PARTITION C AND CREATED 3 LOGICAL DRIVES.
Now I want to install OpenSuSE 11.4 on one of my logical drives. What should I do to keep all things well, which means I will be able to dual-boot and also keep my recovery function well? What's more, what I do not want is that the windows 7 cannot be chosen at boot or neither of them can boot!
View 8 Replies
View Related
Jan 9, 2010
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies
View Related
Jul 28, 2010
I would like to combine my Linux partition (/sda3) and /sad1 to give me more disc space. I would also like to combine the two unallocated partitions to install a Windows 7 dual-boot with Ubuntu. How would I do that without totally raping my current Ubuntu install?
View 1 Replies
View Related
May 6, 2011
I'm trying to install openSuSE 11.4 onto my brand-new Lenovo W520 laptop, using the Intel Rapid Storage Technology (FakeRAID?) controller, ROM version 10.1.0.1008. I have 2 physical 500GB disks configured in a mirror (RAID-1). Everything looks fine, the installation program comes up and asks if I want to use mdadm to manage the RAID, to which I answer yes. I go through the normal setup screens, and select the partition layout that I want (for sake of this post, I'll limit myself to the layout that the system itself recommends).
The problem comes when it becomes time to format the partitions. Somehow the partitioning program gets it into it's head that the root partition is 10TB, not 20GB, and the ext4 partitioning fails in various ways (short reads to sector zero, unable to map using 4096 byte sectors, etc, etc) depending on exactly which partitioning scheme I'm attempting. I pretty much get the same result no matter how I play the partitions, which file systems I use (XFS, ext4, etc [of course, I can't use XFS for /boot...]).
For now I've gone ahead and set myself up using software RAID, since this system is unlikely to become dual-boot with Windows for a few years at least. (As an aside, but as a hint to others, when the installation fails, I end up having to go back into the Intel RAID controller BIOS boot to clear out the entire RAID setup each time it fails - the disks are left in a completely useless state).
View 5 Replies
View Related
Mar 29, 2010
i'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
View 9 Replies
View Related
May 1, 2011
I have 10.10 installed within my Windows Xp.All was fine.Then,I upgraded to 11.04.Boot screen etc is fine .Log in is automatic in Classic.Unity & Compiz not supported.Now,again everything is fine except that my xp partitions are not recognised and hence I can not mount them and access them.
View 5 Replies
View Related
Apr 2, 2011
I have cleaned-intall 11.4
After the installation, the KDE environment is not booting as the default, but runtime level 5 boot instead.
I have checked my installation and ensured to have KDE4 installed.
Please advise how to have KDE boot.
My graphics card is ATI Radeon Mobility X1400 on Acer Travelmate 4670.
View 4 Replies
View Related
Jul 31, 2011
I have two Lenovo laptops: One is a T410 now running on openSUSE 11.4 with KDE 4. I got my wireless, keyboard languages/layouts, upgraded firefox... The other, a V570, is currently running Ubuntu 11.4 and I'd like to install openSUSE 11.4 on it.
Here is what I did. Downloaded openSUSE-11.4-DVD-x86_64.iso from software.opensuse.org: Download openSUSE 11.4 (Direct link). md5 checksum is good (compared to checksum posted by caf4926). Burned to DVD using Brasero. Installed openSUSE on the T410 (did the media check first from the installation menu - it was ok). Install went well and system is running fine. I'm happy with it
This is the problem I'm having; tried it about 10 times now and every time it's the same. Using the same DVD, trying to install openSUSE 11.4 on the V570 machine; after turning on, it boots from the DVD and I get the following 3 lines and then the cursor just sits at the fourth and does not continue
ELILO boot: ..........
Loading kernel linux... done
Loading file initrd...done
View 9 Replies
View Related
Jan 16, 2011
Yesterday, my windows xp died and I can not do anything with that, but I would like to rescue my important files from hdd before format. I open ubuntu trial version from cd but i can not access my hdd. I find my hdd in system->administration->disk utility but I can not go anywhere from there.
When I solve this problem I would like to try ubuntu as my os but i am worried that some programs may not work on it . Like for example my bamboo tablet, fm2010, adobe ilustrator, autocad.
View 9 Replies
View Related
Apr 15, 2010
Im probally just being a noob here but for the projects sake I thought it would be good to identify this problem. I have an old advent laptop and I tried to install Opensuse from DVD on it. I followed the installation as normal but when I tried to boot it said some sort of check was forced and then I have to enter the admin/root password upon doing this I got the message system repair # in red. I have tried to repair the system through the installation DVD and tried re-installing it but I still get the same message.
View 9 Replies
View Related
Jun 5, 2011
some info on the drive - it's a USB 2.0 portable hard drive (PQI H560), one partition spanning all 640GB, NTFS. Used almost exclusively on Linux (arch and ubuntu), but initially formatted on Windows 7.The hard drive has quite a lot of hard links on it, as it was a timemachine-like backup system.And now the issue itself:Today I made the mistake of taking out my portable hard drive from my Linux system and plugging it in a Windows 7 box. Everything worked nice, I took a movie from the drive, and it lay dormant for an hour or so. After that I took the drive out (forgot to unmount :/) and put it back in my Linux.
Any idea why did it break so bad? I thought NTFS was kind of durable.Best if there would be something nondestructive (be able to get the data while preserving every bit of the drive in it's current state - just to be sure it doesn't break anything)
View 3 Replies
View Related
Jul 1, 2010
Windows' Master Boot Record seems to be damaged on my dual-boot.Here are the details.
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> HP/Gateway is installed in the MBR of /dev/sda
[code].....
View 5 Replies
View Related
Apr 1, 2011
I've read that, when configuring a dual-boot system, you should install Windows first to avoid any issues.Some questions: I'm assuming this has to do with the boot loader so: How is Windows boot loader so different that this matters? If I'm totally off, please explain.Is this the same case with Windows 7 and Windows XP? Depending on question 1 of course: Will installing Windows later on mean that it will definitely not work or just that you might encounter issues later on? Some tutorials are kind of ambiguous about that point.
View 3 Replies
View Related
Sep 30, 2010
I use dual boot in the lap, Windows 7 Ultimate x64 and openSUSE 11.3 x64, plus another NTFS partition dedicated for data. When I browse normally with Dolphin the 2 NTFS partitions I can see and browse them, but it doesn't allow me to write data (create new files or paste) or modify saved files. It's like a read-only partition. I have to run Dolphin browser as root in order to be able to normally write and modify data. Some other pals however tell me they're able to do it without running as root, although they use openSUSE x86.
View 9 Replies
View Related
Mar 7, 2011
I've been trying to install Linux as a dual boot with Windows 7 on my Dell latitude e6510.It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux.The issue I'm having is that when I run Linux installers by boot from CD they see the entire hard drive as unallocated space. I have tried Ubuntu 10.10, Kbuntu 10.10 and Fedora 14 and they all have the same problem.I have also tried the Ubuntu "install in Windows" option and could not get it to work.EDIT:Booting Gparted 0.8.0 from a usb drive did not work. It reported the entire drive as unpartitioned.
View 4 Replies
View Related
