OpenSUSE Install :: How I Should Be Setting Up Partitions On Install
May 5, 2010
I'm running WIN 7 and trying to dual boot with 11.2--the install goes fine until I get to partitioning. Then I get this message: Del windows partition /dev/sda1 Resize impossible due to inconsistent FS try checking FS under windows.Del/dev/sda3 Del Windows /dev/sda5.Then it wants to install extended, swap and root. I tried to resize the partition prior to intalling SuSE with paragon partition manager which failed.Could someone tell me how I should be setting up the partitions on install please.
In my hard disk I have win xp, opensuse 11.1 and ubuntu 10.4. I'd like to replace 11.1 version of opensuse with the last one 11.3 without losing data and setting in other partitions. this is my hd:
[Code]....
I think (but I'm not totally sure) I installed opensuse in dev/sda6 and dev/sda7...what is the right thing to do?? should I have to delete /dev/sda5 /dev/sda6 and /dev/sda7 partitions and then install opensuse 11.3 in the new free space??
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
I've just installed 11.4 and then updated to gnome 3. I've noticed that Nautilus doesn't appear to mount my windows NTFS partition. I find this odd because both Ubuntu and Fedora detect and mount it just fine in Gnome 3 (I've been trying all 3 this week).
After a fresh install of opensuse 11.3 x86_64, using a NET install CD, I noticed that the boot disk layout has overlapping partitions. I've noticed one other post that mentioned this at the very end. Is this a known problem already? Or is there something I'm missing that makes this okay?
I'm trying to migrate from Ubuntu but I'm stuck at partitioning part of the installation... The problem is that the partitions are not recognized (I have NTFS + EXT3). I see only /dev/sda and it says it's unpartitioned When installing Ubuntu I had similar problem and I was solving it by removing dmraid.
I'm trying to do a network installation of opensuse 11.2 on my ASUS eee 701.
- I've downloaded the ISO image, verified it with md5sum, and burned it to CD. - I've used a live CD and fdisk to create a new partition table on the internal SSD (/dev/sda) and a single primary partition of type 83. - I've booted the CD, changed the language to English[UK], and continued.
The installer then told me that there's not enough memory for a graphical installation. This is weird because my ASUS has 1MB of memory and works fine with a live CD, but it's not much of a problem because I'm comfortable with text-based installation.
The real problem is that the installer froze on the next screen while "searching for Linux partitions". I aborted after about 10 minutes of inactivity.
I don't really want to download the entire DVD because I've only got 4GB of SSD and want to set up a trimmed-down system.
I had a Windows 7 RC/openSUSE 11.1 dual-boot on this computer running on RAID 1. When I installed Windows 7 final, somehow it screwed up my RAID 1. I fought with it for a while, but decided to wipe the logical drive, and then go into BIOS and disable RAID. I reinstalled Windows 7 on the HDD, but I have no RAID now. BIOS shows 4 SATA drives. Windows sees all of them just fine. But the openSUSE 11.2 install DVD can't see any partitions on sda, sdb, sdc or sdd. It however says I still have two RAID logical drives, which I don't. I'd really like to install openSUSE 11.2, but I want it to recognize my Windows partitions, if for no other reason that to see my MP3 collection, my eBooks, etc.
I have a pretty weird problem, which is that I can't format any partitions anymore.
It started when my laptop suddenly froze and I killed it (I just ran FF, IRC client, Kopete, ... and I think the last thing I did was plugging in a USB drive). When I wanted to boot the machine again it gave me a lot of errors that the root and the home partitions are both corrupted.
Repairing the system with the DVD didn't help at all and finally I removed all the partitions to reinstall the whole system.
During the installation it can create the partitions, but it can't format them with ext4.
I tried to format the partitions with a live CD and YaST Partioner and the same problem showed up code...
Texts about partitioning with LVM are quite technical.However I should like to find a text explaining me how to manually make LVM-partitions in OpenSuSE. Like which ones, how big, how to do it. I made an auto LVM with /home. Problem is my entire disk is not used (/root was 5GB max /home was only 7GB max on sda2)and I was not able to make the partitions the seize I wanted.
I have now sda1 configured as /home 280GB and sda2 with the proposed partitioning of Yast. So only 5,9 GB for root. It looks like my try-out is working fine, however. Using normal partitioning is not a good option on my PC. He shows lots of black screens. With LVM no problem at all.
Since i first installed my openSuse 11.2 on the laptop, I didn't know how much space I'd need for this OS to run. Now I've encuntered the worst - The root prartition is 6GB big and it might run out of space shortly (700MB left).I had Win XP on it but as soon as I learned openSuse to make basic tasks - i removed the ntfs partition.The HDD is 28GB, I have 6GB root, 7,5GB home, 750MB swap (512MB RAM) ans 14,65GB free space off the deleted NTFS.Is there any way to join the partitions, so the root can be 16GB in space and home around 12GB?
Or maybe just make another second /home partition and use a program to allocate the "missing bytes" from root to another partition if it runs out of space?
I have an acer travelmate 632 running 11.3.The grandkids have been playing playing frozen bubble in fullscreen mode but the "full screen" was actually only the central part of the monitor.Yesterday, there were a bunch of updates. Today, the kids again played frozen bubble but this time, the "full screen" was really the full screen, not the sub-window. After exiting the game, a window popped up telling me that a monitor had been disconnected and would I like to reconfigure. I said yes.
After reboot, the graphical login failed saying that a serious error had been encountered and that I should consult the KDM logs. I went to console mode but was unable to log in. Neither as root or as the regular user. Both fail with "Login incorrect". In fact, the only way in now is via single-user mode.
Looking through the /var/log/messages, I see a curious set of mesages complaining the, for instance, "/dev/sda4 is not in PARTITIONS" note the upper-case. I then see that, despite what "mount" tells me, ?home (sda4) and /boot (sda1) are not mounted. That is, I cannot list their contents. If I manually mount those partitions, I can list their contents.
I am dual booting Windows 7 & Suse 11.2 and want to uninstall Suse. I know how to remove the linux partitions through windows but need help to first remove the Grub bootloader installed through Yast to enable windows to boot from mbr.
I'm new to OpenSuse 11.2, In Yast partitions configurations, I've mounted all NTFS partitions successfully without ticking "read-only", and according to this webpage: NTFS - openSUSE I checked my fstab file, there's no "-ro" in the file. But I still couldn't write to any mounted NTFS partitions, I can't do paste file, can't save changed files into NTFS partition.
I have to hide Unix partitions to succeed in installing Linux and the winner is Ubuntu 10.10! I had to remove whole partitions entries. DOS based primary/logical partitions are now called (hd0,msdos1), (hd0,msdos2), etc. And BSD slices would have been (hd0, bsd1) (hd0,bsd2). I guess I saw those names during installation. update-grub failed in three attempts in a row on 2 machines (32 and 64 bit). Everything went fine after I removed the Unix partitions (which are going to be restored by openSUSE legacy Grub)
I would like to know i can i have my partitions shown in Nautilus and gnome-panel. In openSuse 11.3 they appear automatically but now in 11.4 they don't...
I did shrinking of windows drive to give 10 gb raw space for OpenSuSe 11.2 installation on my T60 laptop.OpenSuSe installer failed to create partitions out of single 10 gb RAW partition.Is there any other way to slice single RAW partition in to / , /home & swap?
I have Installed windows 7 over windows xp in the first partition (primary) and I lost linux partitions and there are two ntfs partitions didn't deleted.want to recover linux partiotns becose they have important data ,or recover files from deleted partitions.used opensuse DVD trying to recover grub but it says there are no linux partitions.
I have Windows XP and OpenSuSE 11.1 installed on my laptop. I have recently removed the recovery partition provided by the laptop manufacturer (HP) to free up some space and ideally I would like to be able to add the free space to the existing Windows partition.The current partition set up is as follows:
Code: Disk size 93Gb, P = Primary, L = Logical, U = Unallocated P Windows XP 36Gb /dev/sda1 /windows
I have been using GHOST for quite a few years to back up my Windoze partitions from NTFS to a series of images on a fat32 partition. I usually boot off a DOS7 bootable CD and simply ghost over to the fat32 partition.
I am rebuilding my laptops and desktops to dual boot Windows7 and Suse 11.2
My goal is to create restore images from my NTFS and ext3 partitions into directories on the fat32 partition for a restoration to my "gold baseline" build after any corruption.
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
I can't edit the partitions in the install setup. When I go tyo the Expert Partitioner, I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices:* /dev/md126 with 465.76 GB, not encrypted, type RAID1 (no info for chunk size, parity or file system)* /dev/md127 with 2.2 MB, not encrypted, RAID_UNKNOWN (no info for chunk size, parity or file system)I didn't try to do anything in the RAID part because I wanted to preserve Win 7, but I dared to add a partition in the "hard disk" (sda) and I get an error: "the disk is in use and cannot be modified".
The behavior of Ubuntu 9.1 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.
GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched.y assure me that it is a "plain vanilla" ("next, next, next") installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.
in my case, to delete primary and secondary win partitions (C and D) and so to add that empty spaces to my current openSUSE / and /home partitions. My linux root partition is a primary one as well so I guess that I can keep booting from it no matter if there isn't the C win drive any more.
Code: Disco /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cilindros of 16065 * 512 = 8225280 bytes Disk identifier: 0x3bef74b8 [Code]...
in attempt to dualboot w7 and opensuse i manage to screw windows boot loader. I was hoping that with opensuse live cd i'll successfully save my data but i was wrong. I can't browse any of partition with any of browsers inside liveCD including dolphin. When i try to access it says: There is no application installed that can open files of the type block device (inodelockdevice). Do you want to try to install one? Is there another option to access partitions because I can't install another browser on live cd.
Will the above procedure accomplish this objective, without crippling openSUSE ? The second swap partition has never shown any activity (on SUSE). I understand (from Using shared swap files) that a single swap partition may be shared. Since these areas are relatively small, It is not inconvenient to maintain separate swap partitions.
i have Windows XP and OpenSuse on my harddrive (dualboot) my problem is i cannot see my Windows-partitions when running Suse, i need to have access to those partitions and i cannot find how to do that.
I include a description and several outputs below, throwing some light on the problem.Does anybody have an idea ?dvanceMikeDescriptionI'm running openSUSE 11.2.The partitions are on a seperate SCSI disk.The partitioner (under YAST) finds them and lists themas Reiser partitions.The disk isn't just some old errorneous drive:it was a spare disk not used very even after putting it in use,and smartctl gives
As every time when a new OpenSuse Version arrives, I tried to install 11.4 (I have 11.2 ans 11.3 on separate partitions, + a Windows 7 that already was there when I bought my computer). Previous versions always recognized existing installations and added them to the Grub list, 11.4 doesen't... it merely recognizes the Windows. This is blocking me from testing it before adopting, as I always do, as I don't know how to add these entries manually; I'm too afraid not to be able to add the entries once installed, and not being able to use my older versions in case I have troubles. What went wrong in this release that developers forgot this important part? How I could manually add my entries for 11.2 and 11.3?
I Just Recently Installed OpenSUSE with GNOME Desktop and was surprised to know that none of my NTFS Partiitions were mounted to the Linux File System. Earlier I had Installed Open SUSE with KDE Desktop and there were no problems, everything was readily mounted and i could access the NTFS Partitions. I am a Total Newbie To Linux. Give Me The Syntax To Mount The NTFS Partitions in Following Partition Table Acquired with fdisk :
Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I have a mounting rack in which I try to plug in various HDDs. Now, all of them have vfat. Blkid returns something like:
/dev/sda7: UUID="4B16-F1E8" TYPE="vfat" The UUID looks abnormally short to me. I found no way to obtain a longer, typical UUID, and when I set Yast2 partitioner to mount by UUID, it sees and it successfully uses the short UUID. Yast2 even adds it to /etc/fstab like this: UUID=4B16-F1E8 /windows/C vfat users,gid=users,umask=0002,utf8=true 0 0 However, this short UUID is useless in /etc/fstab. It doesn't work at boot time and it doesn't work when I try to mount manually. xxxxx:~ # mount /windows/C mount: special device UUID=4B16-F1E8 does not exist. Also, one cannot find these short UUIDs in /dev/disk/by-id/.
For a billion reasons, I really want to mount these FAT32 partitions by UUID. Do I have any way to do it?
As I type this, I'm waiting (and waiting) (and waiting) for the Repair Tool Box, "Search For Lost Partitions" tool to stop running off of the install CD. I didn't actually mean to do that (I meant to select "repair file system!) and I don't see any way to abort it! How to I make it stop? (You can insert your best Deanna Troi voice there, if you like: "make it STOP!") Or do I just wait until sometime next week for this rascal to finish examining a THREE HUNDRED GIG partition, byte by byte . .. ?
