I did shrinking of windows drive to give 10 gb raw space for OpenSuSe 11.2 installation on my T60 laptop.OpenSuSe installer failed to create partitions out of single 10 gb RAW partition.Is there any other way to slice single RAW partition in to / , /home & swap?
View 3 RepliesI am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies View RelatedI'm trying to configure autoyast to create three primary partitions:
/dev/sda1 (/boot)
/dev/sda2 (swap)
/dev/sda3 (/)
This is the XML I've come up with:
HTML Code:
<partitioning config:type="list">
<drive>
<use>all</use>
<initialize config:type="boolean">true</initialize>
<partitions config:type="list">
[Code]....
I seem to be missing an instruction or misunderstand something here.
I'm using 1TB BIOS Raid stripe 0 (Intel 82801ER ICH5R) and I want to use this configure to install Opensuse 11.2 is this correct?
1GB for /boot
5GB for swap
100GB for /
Rest of disk for /home
And other question is when I install on this configure sometimes setup hangs after finishing copying file and restart to enter configuration section.
My laptop has a 60GB hard drive, which my ex-husband set up with a 20GB partition for Windows XP and a 40GB partition with Suse 11, which suited me fine at the time. However, I'm now finding that I need to install a whole bunch of extra Windows programs relating to my work, and the 20GB partition is no longer sufficient, while I'm hardly using any space at all under Linux.
how I might go about redistributing the space between the two partitions (any other solutions to my lack of space problem also welcome)? Please bear in mind that I'm pretty clueless when it comes to this kind of thing!
I am about to install a test machine for testing out system configurations and software modifications.Instead of installing a virtual machine I wish to create a secondary partition which holds a "restore image" of the "clean" system. Also I would like to be able to select a system restore function in Grub while booting.
View 4 Replies View RelatedI am new to linux. I tried and failed. I need some help on Creating patitions (I think it is root, swap and home).I have HP laptop with WIndows 7 installed. I have shrink the volume to allow Linux installation. I have three partitions, first one is windows boot - about 100MB. Second one is about 110GB and it has windows 7. Third one is UNALLOCATED space of 110GB that I intended for Suse.
Now I am going to install the Suse. The unallocated spaces should be "primary" or "extended"? Also, should I divided this new partition in to three partition? If does, what are sizes for each? I want to learn Linux so I will able to look for better job. This is the first time I ever look into linux and confused.
I'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.
It always wants to create a separate /home partition.
I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?
using Opensuse 11.3, I have used Ubuntu 9.10 in the past and have had a blast with Linux. I have to rehash some of my old skills that I have forgotten in the past several years..I installed 11.3, everything is working fine. However, I just releazed that after I installed it, I used my whole partition (Not Windows 7, or I would've been in hell). My Windows 7 is in Raid 0. My second HDD is 1 TB and 11.3 is on there. So, how can I trim down let's say 100 GB and just give the rest to Windows (800gbs). I need that much because I do editing for videos, etc. So, once again, how can I trim my partition and use it for Windows 7.
View 7 Replies View Relatedi want to dual boot, and create ubuntu on a second partition, and while im at it remove the windows partition that i dont use on here at all
also, i want to run chkdsk first, does anyone know how i can do that on linux?
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View Relatedtrying to update a 11.1 installation. As I start the installation I get a message "openSuse 11.0 partition /dev/sda5 Change the mount-by to any other method for all partitions." Also the message said go back and reboot and make the change. What is this all about, how do I do this.
View 9 Replies View RelatedI have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies View RelatedI am dual booting winxp and opensuse 11.2 on a 80gb harddrive with 3 partitions. first primary conatins xp, second logical and active contains opensuse and third primary holds data. i want to create another partition after /dev/sda3 using the free space from /dev/sda3.can u advise me if it is possible? and if yes, what do i need to consider. here is the output of fdisk -l
Code:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x285adb1d
[Code]...
Since I installed MS2 I messed up grub. Finally I got 11.3 back to its old glory.
What would be the best procedure to create a backup image with all settings and permissions ...just in case ?
After a fresh install of opensuse 11.3 x86_64, using a NET install CD, I noticed that the boot disk layout has overlapping partitions. I've noticed one other post that mentioned this at the very end. Is this a known problem already? Or is there something I'm missing that makes this okay?
View 9 Replies View RelatedI have this hard drive with ~ 500 Go of unassigned space. I'd like to create a partition to store some backups but Yast 2 expert partitioner refuses to add any partition on this drive. A window pops up telling me:It is not possible to create a partition on /dev/sda/I am working in opensuse 11.3 (recently upgraded from opensuse 11.2)Linux linux-vytp 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 i686 i686 i386 GNU/Linux
View 7 Replies View Relatedso i have a main drive (320gb) which currently has kubuntu 9.04 installed.i also have a side drive (60gb) on which i made a backup of all my windows files (i wanted to migrate to new windows OS but messed up, long stupid story...) and also had opensuse 11.0 installed.now when i open either 2 linux versions, the ntfs partition isnt recognised anymore.there are files on it that i need, including the iso of the windows version i want to install next to opensuse (just like my old windows version)
View 5 Replies View RelatedI'd like to reinstall openSUSE 11.3 on a pc and would like to preserve the /home partition. The current partiton structure is
sda1 /boot
sda2 /swap
sda3 /extended partition
sda4 /
sda5 /home
When the installer gets to the point to set up the partitions it offers something like
sda1 /
sda2 /swap
sda3 /home
I'm not sure which option to take now. I assume I choose the option to edit the partitions but I'm not clear how to preserve the /home as it's now got a different partition number or does that no matter as long as I choose not to format it? Also, to replicate the original partition structure I'd need to delete the partitions and add them in the correct order but would that destroy the /home?I'm a bit confused with how it will work.
I had a Windows 7 RC/openSUSE 11.1 dual-boot on this computer running on RAID 1. When I installed Windows 7 final, somehow it screwed up my RAID 1. I fought with it for a while, but decided to wipe the logical drive, and then go into BIOS and disable RAID. I reinstalled Windows 7 on the HDD, but I have no RAID now. BIOS shows 4 SATA drives. Windows sees all of them just fine. But the openSUSE 11.2 install DVD can't see any partitions on sda, sdb, sdc or sdd. It however says I still have two RAID logical drives, which I don't. I'd really like to install openSUSE 11.2, but I want it to recognize my Windows partitions, if for no other reason that to see my MP3 collection, my eBooks, etc.
View 8 Replies View RelatedI got a hold of openSUSE11.2 recently, burned it, and booted the disc up.Now i got a problem.I ain't too experienced in partitioning, so i choose everything as selected in the installation(i downloaded the full DVD, not a live CD)and i got to the partitioning part.I have this:
500GB WD Caviar Blue SATA2
80GB ATA
I installed Ubuntu on the 500gb with wubi and partitioned 30GB for it.Well that one is easier, i have absolutely no experience in installing from a CD/DVD.I saw instlux, but it wouldn't run from Win7 Any guide on how to manually partition 30GB for openSUSE too?
I've just recently decided to try Linux, but I want to keep Windows 7 on my computer as well. This is also the first time messing with things like partitions. Could anyone lead me to a good site where I can figure out how to partition my hd, dualboot openSUSE, and fix any problems that may occur?
View 9 Replies View RelatedI have a pretty weird problem, which is that I can't format any partitions anymore.
It started when my laptop suddenly froze and I killed it (I just ran FF, IRC client, Kopete, ... and I think the last thing I did was plugging in a USB drive). When I wanted to boot the machine again it gave me a lot of errors that the root and the home partitions are both corrupted.
Repairing the system with the DVD didn't help at all and finally I removed all the partitions to reinstall the whole system.
During the installation it can create the partitions, but it can't format them with ext4.
I tried to format the partitions with a live CD and YaST Partioner and the same problem showed up code...
Texts about partitioning with LVM are quite technical.However I should like to find a text explaining me how to manually make LVM-partitions in OpenSuSE. Like which ones, how big, how to do it. I made an auto LVM with /home. Problem is my entire disk is not used (/root was 5GB max /home was only 7GB max on sda2)and I was not able to make the partitions the seize I wanted.
I have now sda1 configured as /home 280GB and sda2 with the proposed partitioning of Yast. So only 5,9 GB for root. It looks like my try-out is working fine, however. Using normal partitioning is not a good option on my PC. He shows lots of black screens. With LVM no problem at all.
Since i first installed my openSuse 11.2 on the laptop, I didn't know how much space I'd need for this OS to run. Now I've encuntered the worst - The root prartition is 6GB big and it might run out of space shortly (700MB left).I had Win XP on it but as soon as I learned openSuse to make basic tasks - i removed the ntfs partition.The HDD is 28GB, I have 6GB root, 7,5GB home, 750MB swap (512MB RAM) ans 14,65GB free space off the deleted NTFS.Is there any way to join the partitions, so the root can be 16GB in space and home around 12GB?
Or maybe just make another second /home partition and use a program to allocate the "missing bytes" from root to another partition if it runs out of space?
I have an acer travelmate 632 running 11.3.The grandkids have been playing playing frozen bubble in fullscreen mode but the "full screen" was actually only the central part of the monitor.Yesterday, there were a bunch of updates. Today, the kids again played frozen bubble but this time, the "full screen" was really the full screen, not the sub-window. After exiting the game, a window popped up telling me that a monitor had been disconnected and would I like to reconfigure. I said yes.
After reboot, the graphical login failed saying that a serious error had been encountered and that I should consult the KDM logs. I went to console mode but was unable to log in. Neither as root or as the regular user. Both fail with "Login incorrect". In fact, the only way in now is via single-user mode.
Looking through the /var/log/messages, I see a curious set of mesages complaining the, for instance, "/dev/sda4 is not in PARTITIONS" note the upper-case. I then see that, despite what "mount" tells me, ?home (sda4) and /boot (sda1) are not mounted. That is, I cannot list their contents. If I manually mount those partitions, I can list their contents.
I was trying to create a partition on my hard drive on Linux using the GParted program. I noticed my hard drive had a key next to its name but could not find information regarding it online. I proceeded to unmount the drive and made 2 partitions. However, it game me an error saying it couldnt make the partitions. I turned my computer off thinking i would get back to trying tomorrow. Today i turn on my laptop and see the usual hp screen. But after that it goes to a black screen with a blinking underscore looking thing. It goes nowhere from there. It usually goes to a black screen after the hp logo, that says GRUB loading.
View 7 Replies View RelatedI've just installed 11.4 and then updated to gnome 3. I've noticed that Nautilus doesn't appear to mount my windows NTFS partition. I find this odd because both Ubuntu and Fedora detect and mount it just fine in Gnome 3 (I've been trying all 3 this week).
View 7 Replies View RelatedI am dual booting Windows 7 & Suse 11.2 and want to uninstall Suse. I know how to remove the linux partitions through windows but need help to first remove the Grub bootloader installed through Yast to enable windows to boot from mbr.
View 6 Replies View RelatedI'm new to OpenSuse 11.2, In Yast partitions configurations, I've mounted all NTFS partitions successfully without ticking "read-only", and according to this webpage: NTFS - openSUSE I checked my fstab file, there's no "-ro" in the file. But I still couldn't write to any mounted NTFS partitions, I can't do paste file, can't save changed files into NTFS partition.
View 3 Replies View Related