I'm new to OpenSuse 11.2, In Yast partitions configurations, I've mounted all NTFS partitions successfully without ticking "read-only", and according to this webpage: NTFS - openSUSE I checked my fstab file, there's no "-ro" in the file. But I still couldn't write to any mounted NTFS partitions, I can't do paste file, can't save changed files into NTFS partition.
View 3 Replies
I Just Recently Installed OpenSUSE with GNOME Desktop and was surprised to know that none of my NTFS Partiitions were mounted to the Linux File System. Earlier I had Installed Open SUSE with KDE Desktop and there were no problems, everything was readily mounted and i could access the NTFS Partitions. I am a Total Newbie To Linux. Give Me The Syntax To Mount The NTFS Partitions in Following Partition Table Acquired with fdisk :
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
Partition table entries are not in disk order
I've just installed 11.4 and then updated to gnome 3. I've noticed that Nautilus doesn't appear to mount my windows NTFS partition. I find this odd because both Ubuntu and Fedora detect and mount it just fine in Gnome 3 (I've been trying all 3 this week).
View 7 Replies View RelatedI am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
View 3 Replies View RelatedI'm fairly new to linux and I have a dual boot laptop with OpenSUSE 11.2 and Windows 7. I have ntfs-3g and have full read-write ability to my Windows drive through OpenSUSE thanks to NTFS - openSUSE. The only problem is whenever I write to the NTFS Windows drive via Dolphin it does the writing but I get an alert box saying:
"Could not change permissions for <path to new file>" with an OK button.
If I write more than one file I'll get one alert box for each file unless I don't press OK until after it finishes writing all the files in which case it will just give me that one that it was showing (once I press OK there aren't any more boxes).
Since I have full ability to read-write this isn't that big of a problem it's just annoying as hell an I'm sure it's pretty simple to get rid of. code...
Are there risks of data loss when writing on a NTFS using ntfs-3g, and will windows have trouble reading from that system later?
View 2 Replies View RelatedI have just managed to install OpenSuSE 11.3.When I try to access a NTFS partition (holding my .MP3s) I get the error message.There is no application installed that can open files of the type block device (inode/blockdevice).Do you want to install one? Attempting to install one doesn't seem to lead anywhere othe than the same sequence. I used to be able to read NTFS partitions with 11.2 - what has changed?
View 6 Replies View RelatedI have two ntfs partitions I use to store music and data. I've been using them in all my linux boxes without any problems. Simply use Ntfs-3g with noatime and everything works great.
However, since the update to OpenSuse 11.3 writing to my NTFS partitions takes FOREVER. I've specified noatime, relatime and norelatime successively without success. The partitions have plenty of space and are defragmented.
When copying large files, It starts fast at first, but in the last hundred MB it slows down to about 1.5MB/s. Even after the transfer is supposedly done, the HD led remains on and all other read/write activity involving the partition is completely halted.
This can take between 5 minutes to 10 or more depending on the size of the file. When copying several small files, (100 MB or less) it starts at about 1.5MB/s from the beginning.
I have the latest versions of fuse and ntfs-3g installed
I first noted a few weeks ago I couldn't mount my NTFS partitions using dolphin. At the time I was having problems with windows, so I thought - naturally, they are marked as dirty, no biggie-
However, I still can't mount them and I know they are clean. I get the error: "filesystem is neither well know nor in /proc/filesystem nor in /etc/filesystems" which is strange since I can mount just fine in the console using mount -t ntfs-3g.
I used to be able to mount my external hard drive's ntfs partition by simply clicking on it, but now I can't anymore... I know that the last time I've used it with windoze, I had to force shut the **** thing down 'cause it was frozen real good (pretty unusual right !?!).The thing is, with ubuntu it sees it and mounts it no problem.
View 2 Replies View Relatedi installed win7 ultimate on a 2TB HD and was hoping to dual-boot it with meerkat, i did a standard install and shrunk the partition using win7 disk management to leave 500GB for ubuntu.problem is ubuntu can't detect the existing win7 install, when selecting advanced setup it just shows one big unallocated partition.
i went back into win7 and extended the partition again, then booted into ubuntu live cd to see if maybe gparted would do the trick. gparted also cannot detect the existing win7 install and just displays unallocated 1.82TB.in terminal if i do 'sudo parted /dev/sda print' i get this message:
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.However, it does not have a valid fake msdos partition table, as it should.Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? ^C
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies View RelatedFor some reason when i write a file to my NTFS-partitioned external HDD the files seem to get severely partitioned. This only happens when writing to it from within Fedora.
Windows Vista doesn't seem to do this.
This image is a screenshot from MyDefrag.
On my other hard drive i have a 7GB file consisting of 1400 fragments.
i'm guessing this is too much fragmented, because it was a completely empty hard drive before it wrote the file.
What could have caused this please? and how can i solve this?
My main workstation incorporates a mixture of ext3, ext4, and NTFS partitions scattered across a number of hard drives. Several of the ext4 partitions are encrypted, and I intend to encrypt the rest of the Linux partitions in the near future.I run VMware workstation, with several Windows OS guests, including Win2K, WinXP and Win7. My Win7 VM is installed on a virtual hard disk, and that virtual hard disk is encrypted using VMware facilities.So this leaves me with a bunch of NTFS partitions that are not encrypted. These are physical partitions on a couple of different hard drives. The reason I have them is ancient and historical, and as I have upgraded my system over time I have maintained the architecture due to the extreme difficulty of rearranging Windows systems.I still need to maintain Win2K and WinXP support, and rearranging those virtual machines would represent a hideous nightmare for me; I really want to maintain the same hard drive partition architecture.But I want to encrypt the NTFS partitions, in a fashion that can be handled by any of the Windows operating systems, AND can be accessed for read and write from Linux.Is this possible? If not using Windows facilities (I don't think ntfs-3g handles encryption, and there are known backdoors in the Windows facilities anyway), is there any third party solution that would work? Would True Crypt do the job in a fashion that would permit access from all the various operating systems, as required? I do generally mount the NTFS partitions in whichever Windows VM is appropriate, then share them out via SMB, but there are circumstances (like when a VM is not running) where I will directly hit them from Linux. So, it is possible for me to contemplate a solution that only works from Windows, but this would cost me the ability to repair/modify those filesystems directly from Linux, which under certain circumstances (a malfunction of the VM, for instance) could be a problem.
View 2 Replies View RelatedI have a handful of openSUSE 11.4 machines that I allow users to use the GUI for web surfing and writing documents and I am meanwhile running scientific computing jobs in the background. Every now and then, someone clicks "shutdown", "reboot", or "hibernate" and ruins my afternoon.
I've searched Google and these forums for ways to prevent a normal user from shutting down the system, but so far haven't had any luck in finding a solution. I have found instructions for just about every other Linux OS, except openSUSE though. These machines are running LXDE, but my preferred solution wouldn't depend on the particular desktop solution in use.
I've got a Desktop System that Automounted Two NTFS partitions in F10 so I could declare them SAMBA Shares and have my other XP and Vista Machine Access them whether my dual boot machine ran XP or F10. Now I've switched to F11 and cannot get the NTFS Partitions to Automount at boot. If I browse with COMPUTER and let the system mount the NTFS partitions once it is running the mount command returns the following output:
[code]....
I believe I need to modify /etc/fstab but cannot get the syntax correct to save my life.
I am using jaunty. I have it installed in a 80 GB ext3 HDD. (This is sdb) I have another 500 GB. Its NTFS. (This is sda) It has 3 partitions. Download, Movies, Dump. They are probably sda1, sda2 and sda3 respectively. Few days ago when I was using intrepid, all three partitions were showing in the Places menu. But I was being able to mount Movies and Dump. Not the Download one. It was continuously saying 'unable to mount'. Now, after fresh installation of jaunty (not upgraded from intrepid) only Download partition is showing in the Places menu. There is no option for the other two partitions.
View 9 Replies View Relateduntil recently, they did fstab mount quite happily, but now, they don't
the error I get is:
Code:
Mountall mount /media/win7 [1089] terminated with status 21
My fstab has not changed but here it is:
Code:
/dev/fd0 /media/floppy0 vfat noauto 0 0
UUID=da252821-a30d-415b-84cb-adca92be5b72 / ext4 defaults 0 1
[Code]....
Oh if I make the windows drive the first avail, then it boots just fine.
On a Linux CD/DVD, there are compressed filesystem images for the live version for KDE or Gnome for example, but they have no extension, but they are clearly an image file ( compressed filesystem images for the live version before installation ) !!
I was wondering, How do I mount these compressed filesystem images, after I copy the ISO content of the CD/DVD on my system .... I want to edit some files or packages and make some changes, like if I want to customize a live version of gnome for example ! ... ( I know you might be tempted to tell me to use KIWI etc to customize etc ..... ) ... but I want to be able to mount the compressed file system image, then edit it for reading and writing while it is in a subdirectory on its own ... i want to open it ! ... is there a way to do this ??? ... these type of files have no extension ...
i can open this compressed filesystem image then to edit for read & write ... before I roll it back again ..... If and when I succeed .... what should I watch out for ? ... will the same compressed file image but slightly modified work again ?
PS. that same question could be kind of translated or be extended like : how do I use unionfs/squashfs programs on the command line to mount these image files with no extension for read & write mode ???
Using: Debian Lenny. I want to mount 2 NTFS partitions in my /etc/fstab file, so that I needn't manually mount them when I want to use them. One of the partitions is the primary partition on the same hard disk as my Debian /, /home, and /swap partitions. The other is a 2nd internal hard disk.
a) Should I use ntfs-3g instead of ntfs as the /etc/fstab filesystem? I want to be able to read and write to the partitions as a user and not just as root.
b) I have read on the forum that "mounting NTFS partitions through fstab is not a great idea" - I thought that any dangers of doing so were ancient history. Why would it not be a good idea?
c) Which options should I use?
d) If I use 'user' instead of 'users' so that one specific user (me) can use the partitions, how do I specify which user name? (The man page is annoyingly unclear about this).
I'v recently migrated from Ubuntu to Debian. however when attempting to browse one of my ntfs partitions I get the following error "Invalid mount option when attempting to mount the volume 'a' a is the name of the ntfs partition i'm trying to browse.I'm using Debian lenny
View 7 Replies View RelatedI need to my NTFS partitions mount automatically "at first" after login without any further intervention of user.
View 11 Replies View RelatedMy computer has 2 O.S.- WindowsXP and Fedora13, and also two 500GB Hard Disks. For HD1 Partition1 is NTFS, a few FAT partitions and last one is Fedora13. HD2 has 2 NTFS of equal size. Fedora13 always showed NTFS partitions on HD1 as 30GB HD, FAT partitions correctly and HD2 as a single 500GB HD with the contents of 1st partition of this HD i.e. contents of 2nd partition of HD2 were never shown in Fedora13. XP showed everything correctly. Recently XP is becoming hung on start up as 2nd HD is connected. But Fedora is showing as previousPl. suggest me the solution as I have a lot data on the 2nd partition of HD 2.
View 1 Replies View RelatedI have installed ubuntu on my notebook, and there are 4 partitons in the hdd, all are NTFS, only one is ext4.
the problem is i deleted some hidden folders(in ubuntu which are not hidden, such as recyclebin and file information table folders) in ntfs partitions, now i need to reinstall the windows 7 back, i have a doubt that even windows will ever recognize those partitions again?
On my laptop I have Windows and Ubuntu, and I use Ubuntu very often. How can I auto-mount the NTFS partitions once I run my Ubuntu without the need to manually ask to mount it and confirm with the root password each time and for each partition?
View 5 Replies View Relatedi want to mount at kubuntu startup some ntfs drives now, i have, on dolphin, to click the ntfs partitions to mount them and after doing that, this lines are included on /etc/mtab
/dev/sda1 /media/WD10EADS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdc3 /media/DATOS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sde1 /media/IPOD_HD-1 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdb1 /media/SAMSUNG401TB-1 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdd2 /media/SEAGATE-1 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
but when i add that lines to /etc/fstab and reboot, i can't access the ntfs drives. dolphin says than only "root" can mount /dev/sda1 on /media/WD10EADS (for example) i tried this too:
[Code]....
My friend has a 1TB external hard drive with two NTFS partitions and he wants to combine them into one. Is it possible to merge them together?
View 6 Replies View RelatedI have U1004 dual boot with MSW7 and sometimes want to mount those NTFS partitions for mostly reading operations. Ubuntu makes it easy by a single click in Nautilus. How to change this behavior and allow mount NTFS partitions with user's password only, like sudo behavior, for example? In addition, how to mount them read-only?
Note: I mount those NTFS partitions occasionally and there is nothing in fstab about it.
I am having a dual boot setup with Lucid Lynx and Windows 7. I want to automatically mount the NTFS partitions whenever I login to Lucid. I am looking for a graphical tool to set this up. Kindly suggest one.
View 3 Replies View RelatedHow can I hide NTFS partitions so that can't be mounted?I noticed when I'm working on Ubuntu that I can delete files on my Windows NTFS partition, I think that's a risk
View 5 Replies View Related
