Ubuntu :: Dual Boot System - Two Choices Presented For Install?
Nov 26, 2010
I have a machine with 2 hard drives, one with Vista installed and the other empty, ready to host an Ubuntu installation. I want my system to dual boot. When I boot via the Ubuntu 10.10 CD I am presented with two choices : install Linux to SCSI1 (0,0,0) (sda) using the entire disk, or to SCSI2 (0,0,0) (sdb) with 50% of the disk designated as Files and the other 50% designated as Ubuntu. Which one do I choose?
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured while installing GRUB ver 0.97 (640k lower/3072k upper memory) [minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename] grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5) Error 25 disk read error grub> quit
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
So heres the thread i had a while back ( url) that had you guys help me setup the pretty standard dual boot of Win 7 and Ubuntu. I have 2 hard drives, main one (640gig) and backup (80gb). I have Win7 installed on the 640 and ubuntu on the 80.
So i have tried installing the SP1 twice today and it has failed. When i click on details on why it failed, it says: url
I can only imagine that this has to do with my Dual Boot. Is there anything i can do or am i stuck? I THINK that my grub and master boot and all that was on the second hard drive and it is the first drive in line to boot up...so i thought i wouldnt have any issues. Not totally sure though.
Im tempted to just remove Ubuntu, its cool to say i have it, but i honestly havent loaded up onto it more than 5 times since i installed it. When you have windows already...its near impossible to want to get onto a free OS that doesnt have the codecs or programs and im not familiar with it. If it was all i had though, (aka didnt own Windows) then obviously it would be my main OS and im sure id love it and have is customized and perfect.
I wish to add more OS to my dual boot system with suse (sda) and windows7 (sda). The plan is to add Linux Mint(sda), PC BSD (sda), Fedora (sdb) and Solaris (sdb). I wish to remove grub2 from mint and install grub legacy, not sure whether it will work or not. I will be reinstalling grub from suse dvd. It gives me a free hand for adding boot entries. I wish to know whether I can remove grub2 and install grub legacy. In grub2 all boot related folders are stored in more than 1 place like /boot and /etc and subfolders.
I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
I have just downloaded Ubuntu 11.04 and am trying to install it on a dual boot system with Windows Vista. I get as far as "Allocate drive space" but there are no partitions to choose from. I currently have Windows and Linux Mint on the hard drive and want to install Ubuntu in the same partition as Mint to overwrite it.
I am currently rebuilding a couple laptops and a desktop to dual boot Windows and Suse 11.2. Windows is installed on partition 1. On the laptops, the build goes fine and dual boot with grub is OK. No issues. But on the desktop, the exact same build (after all the on-line updates, etc) fails with "Operating system not found" on the final (and first) boot. It seems that the Suse 11.2 build is somehow resetting the active partition and the boot does not see grub or Windows. When I reset partition #1 back to "active, only Windows loads. So I guess I need to fix this by reinstalling grub. Or use the Windows boot loader.
(1) Where is grub located on my system?
(2) What partiton is the Linux master Boot record If I wanted to use the Windows boot loader and do the following command to grab the 512 bytes I need:
dd if=/dev/sna? of=grub.bin bs=512 count=1
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
I just installed SUSE 11.2 as dual-boot with WinXP on an older system that has a 160GB PATA drive and a 500GB SATA RAID drive. I left about 80GB on the PATA drive unpartitioned to accommodate SUSE. During the initial installation attempt, SUSE was determined to install on the RAID drive instead of the PATA drive, so I disabled the SATA drivers in the BIOS to force the installation on the PATA drive. This was successful, but now there is no access to the RAID drive from SUSE because there is no driver and it is not mounted. I reactivated the SATA drivers in the BIOS and the RAID drive reappeared in WinXP with everything intact. The SATA drives now appear in SUSE under Hardware Information as "/dev/sdb" and "/dev/sdc" and the listed driver is "sata_sil".
So how do I get the RAID drivers installed in SUSE and then mount the drive so it can be browsed/modified from Dolphin? I would also like to be able to browse/change this drive from other computers on my home network through samba, just like with WinXP.
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
I am having 320G of HDD , on the HD i m having 40G free space when i m trying to install rhel5.4 in the free part it is showing me this error
Could not allocate partitions as primary partitions: Partitioning failed: Could not allocate partitions as primary partitions.Not enough space left to create partition for /boot.
My Toshiba Satellite 5205-S705 laptop with Win XP Home sp3 has a non-working cd drive, is riddled with viruses, and isn't capable of booting to a USB drive. (please no comments about paperweights etc., it's all I have!) I want to install a Linux dual-boot version that is heavy on antivirus scanning support. Since I can't boot to an .iso disk, is there any other way to do this? I can transfer files to it via USB thumbdrive or download via Internet.
I would like to recover my grub installation in a dual boot system. if there is an easy way to recover grub using flash disk? If yes is your suggestion opensuse developed? (currently running 11.3) . It would be nice also to have some gui just to make things easier. If not I assume that then the only option is the boot from dvd. Is that right?
I have a dual boot laptop with OpenSUSE and Ubuntu. The boot loader used is Ubuntus Grub that came with the Ubuntu installation.
I have done a zypper dup and upgraded to OpenSUSE 11.4. When I reboot my system I can no longer boot into OpenSUSE, Grub says something about a missing kernel.
I think I understand whats wrong here; the OpenSUSE entry in Grubs table hasn't been updated with the changes brought in by the zypper dup (new kernel i guess).
I'm I correct to assume this? How do I fix the problem? Booting into Ubuntu I tried to find /boot/grub/menu.lst to examine it by I cannot find it. I know Ubuntu use a newer version of Grub, does it have a different file layout?
I was wondering if it were possible to have a dual boot system (XP and Debian) where when you press, say F7, you will boot into windows or if your press F6 you will boot into Linux. I have a monitor that doesn't support the initial start-up graphics
I just recently installed ubuntu 9.10 in my upstairs computer. It is a single boot system.Downstairs I have a dual boot system. I have windows vista and ubuntu 9.10 installed. It worked fine. I wanted to make this a single boot system and uninstall ubuntu 9.10. I cannot get rid of the grub bootloade
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
ubuntu 10.10 dual booting with xp. everything works fine but my bootup choices of ubuntu 10.10 or ubuntu recovery mode have now trebled i.e are repeated three times on boot list, with windows still as one choice at the bottom of the list. is this normal? is something wrong and do i need to do anything?
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
When I first installed Ubuntu as a dual-boot (about 18 months ago), I had problems booting to XP, which were eventually solved for me in this thread, which set Windows to boot Ubuntu, rather than the other way round.
I've just had to do a fresh install of Maverick, following a major problem, and I'm back to being unable to boot XP. The error is different from before and I don't want to start guessing at what to do about it and screwing things up still further.
The GRUB menu lists Ubuntu first, then Windows XP. If I choose XP, it takes me to my previous boot menu, with Windows as the first option. However, selecting this gives me
Code: Windows could not start because the following file is missing or corrupt: <Windows root>system32 toskml.exe
Please re-install a copy of the above file. Windows and Ubuntu are on separate hard drives. XP was fine until I re-installed Ubuntu.
it was on instructions from "She-who-must-be-obeyed"'s orders. I had to install XP Pro onto an unused partition of my hd to dual boot with Ubuntu 9.10. It was an uneventful installation as those things go when dealing with a microshaft product, but after massaging out the bugs with XP, there was no option upon restart to boot to anything but XP. The machine just automatically booted to XP.
Now, here's where I feel even more the fool: during the XP install, a screen passed by saying something about changing the accessibility to the Ubuntu partitions, but that it could "easily" be changed somehow once XP was fully installed...I didn't write it down. I know, I know... I'm not worthy of it, but, please, if there's someone out there who knows what's going on with this, please pity this old fool and offer up any advice you may have.
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
I'm trying to install phpmyadmin and I mistakenly marked SSL configuration which I don't use. I then uninstalled the app but every time I install it uses the same configuration. How can I force the install to start from scratch and give me the initial install choices?
I have a dual boot system with OS X and Ubuntu on a mac pro. I would like to set up two harddrives in a software RAID 0 configuration. I was going to set up the drives in OS X using the Disk utility, but then I was wondering whether Ubuntu would be able to read it, and how you would go about setting it up.
I have a computer that I use for practically everything. In the same room I have a second computer that I use purely for trialing Linux distributions, It currently has Debian, gNewSense and Kubuntu on it with Grub to choose between. This computer has no keyboard / mouse / monitor, but it has directly wired ethernet to the home network. Is there any way I can set it to be remotely controlled from before / during grub so I can choose from the other computer which to run? I realise I can just crawl behind the desk and unplug the keyboard / mouse / monitor, but I don't particularly want to every time I reboot into a different distro. I also realise that remote access during boot is a security risk so is there a way of allowing only one MAC address to do the controlling?
I have a dual boot: XP and Ubuntu. When I load XP I have an IP address (shown in ipconfig /all) and www.whatismyip.com of 144.82.192.154 When I load Ubuntu I have an IP address (shown in ifconfig and www.whatismyip.com) of 144.82.193.37 These IP addresses seem to be static since I have an Ethernet connection. I have rebooted several times and get the same addresses in XP and Ubuntu. Why are they different?
I want to uninstall Ubuntu from my machine, but I didn't find any direct instructions on how to do so.I dual boot Windows 7 and Ubuntu 10.04 64-bit,with Windows 7 installed first.
