It would be convenient if i could simply install 11.3 along side my Ubuntu distro. I see yast enables me to reduce my sda1 and create a new partition, (sda3) However it offers to mount sda3 in /usr ? Could you offer me any advice please? My objective is to be able to select which distro from the grub menu.
View 9 Replies
have been trying to setup a dual boot system with ubuntu and XP running side by side on my Thinkpad T41.tried it a few times and always causes the same problem. i have 40 gig HDD, on which i create a 13 gig NTFS partition and leave the rest as free space. then install XP on the NTFS partition. no problems.
then i boot from the ubuntu disk (9.10 Karmic) and install using the "use free space" option at the partition section. ubuntu installs ok, and boots fine from GRUB 2.0. BUT when i select the XP option from GRUB's list, it starts to boot XP, i get the standard XP loading screen for three seconds and then it crashes to a blue screen critical problem, and restarts the system. when i then boot from the xp cd and go into recovery mode CHKDSK will not recognise the disk, and DISKPART shows one HDD at 35 gig which it cannot access.
this means i cant run FIXBOOT and get my xp install running again. every time i do this process it produces the same problem. tried at first with xp installed on whole HDD, and reducing the xp partition size. killed XP. then tried ubuntu first and xp second - but this caused the same inaccessible disk problem - xp would not recognise the partitions and would not install. so i slipstreamed my XP install disk to SP2 hoping this would make it recognise the partitions, but no luck there. so had to format all and repartition the 13 gig NTFS for xp. installed xp again without difficulty but ubuntu install killed my xp in the same way.
It used to be a sysadmin/yast setting wherein you configured the display.It is now done under "personal settings"-->"display" meaning ordinary users can set their own preferences. That's really nice and all, but I'd rather it be sysadmin-only than have to go through several minutes of futzing around with it every blasted time I login. So, how can I make side-by-side permanent either for myself or for all the people who use my system (just me)? Thank you.
This module is only for configuring systems with a single desktop spread across multiple monitors. You do not appear to have this configuration.Since I obviously do and since I can get the desktops to spread across the monitors (after futzing for several minutes).
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedI have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies View RelatedI'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
I recently built a new rig and wanted to make it dual boot with W7 & OS 11.2. I installed W7 and partitioned my drive with 30 gigs I anticipated using for the 11.2 install. OpenSuse will not recognize it or allow any changes to that hard drive.
View 9 Replies View RelatedBeen trying this by the guess and error method for days.I know about the "Swerdna" post but it is way to difficult for me.I do this every other output from Microsoft, so it is very difficult to rememberwhat transpired. Bedsides it changes with each new distro.I'm tempted to use the VM program that Dedoimodo recommended but I don't knowhow it handles Email and urls. If they are permanent or not.
Setup:
HD1 - Vista - sda
HD2 - Opensuse 11.2 - No boot to MBR - sdb
[code]....
i have a toshiba laptop running Windows 7 64 bit and i would like to install openSUSE 11.3 64 bit on it. I downloaded the DVD version and would like to know how i should do it.
View 1 Replies View Relatedhow to do it with vista or XP. I want to have dual boot with the partition i already got working on SUSE, the rest I want to have ti in Windows.
View 9 Replies View RelatedRunning openSUSE 13.1, and want to dual boot with Slackware to satisfy a long-held curiosity. However, I'm not sure how to proceed with partitioning; at the moment I have about 20gb for openSUSE root, a swap partition and the rest of the 320gb disk is home. Do I just need to add a root partition for Slackware, or are things more complicated than that?
View 1 Replies View RelatedMy main os, albeit only because of gaming, is windows 7, and I was looking to dual boot with 11.3. I couldn't find any documentation of this, so here it goes: Does the executable on the 11.3 disk install opensuse like wubi does ubuntu?
View 9 Replies View RelatedI've been googling and couldn't find solution to my problem. In the past I was able to get around dual boot with Win XP but that Win 7 seems to be more resistant to dual boot. I have a Toshiba Portege T110 that came with Win 7 home edition. I parted the hdd using gparted and put Linux on extended partition. It was OK up till then. After installing Opensuse 11.3 and installing Grub in extended partition, grub came up but when I chose windows, I got error from windows boot manager saying it couldn't find winload.exe. I tried to manipulate the grub by typing:
rootnoverify (hd0,1)
makeactive
chainloader +1
boot
That didn't work at all. So I reinstalled Win 7. After Win 7 back up, I again tried to fix grub by doing this:
find /boot/grub/menu.lst (this gives hd0,5)
root (hd0,5)
setup(hd0)
quit
After rebooting, grub came back but when I tried to access win 7, I again got the black screen saying my winload.exe is missing. I'm reinstalling my win 7 for the 2nd time now. But I'd still like to get the dual boot with Opensuse 11.3 to work. What have I done wrong? Should I put grub in MBR or the mount point / ? or should it be left alone in extended partition? And how do I move grub to different place?
I am trying to dual boot windows 7 and openSuse. I have shrunk my main partition and it is now unallocated. When running the DVD at the disc section I got the message Delete partition /dev/sda1 (199.00MB) This is my windows system partition (NTFS)
Delete windows partion /dev/sda2 (261.49GB) This is my main partition C: (NTFS) (Don't want to delete this Resize impossible due to inconsistent fs. Try checking fs under windows. Delete windows partition /dev/sda3 (16.31GB)This is my recovery partition.(NTFS) I also don't want to delete this. Resize impossible due to inconsistent fs. Try checking fs under windows. Delete partition /dev/sda4 (103.34MB) HP tools (FAT32) (Not sure about this, but would rather keep it.
Create swap volume /dev/sda1 (2.01GB)
Create root volume /dev/sda2 (20GB with ext4)
create volume /dev/sda3 (276.08GB for /home)
I also pressed created partition and clicked on the unallocated space but I got an error telling me that I either didn't have enough space or hadn't selected enough partitions. (The unallocated space was 20GB)
I have a netbook with windows 7 installed and want to put Fedora 13 on also. Im not new to computers per se but new to linux. I did install Ubuntu 10.04 but didnt like it that much. I have tried Fedora 13 on my usb pen before installing and found it much nicer to use than Ubuntu.I do have an external dvdrw to install this if its easier.My query is..How do i dual boot this? I tried but every option i see isnt the option i want. I dont want to chose "use free space" as this will take all the rst of the 250gb hard drive i have and leave me nothing for windows. IF i partitioned the hard drive in half, how would i do
View 14 Replies View RelatedHave 2 HDDs, ubuntu 804 is on primary, xp is on secondary. using grub boot loader which defaults to xp.
xp install has crapped out and needs reinstalling. any caveats i should be aware of?
My thoughts were that i should just stick the xp cd in, boot her up, reformat secondary, install xp and everything would be fine?
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies View RelatedI have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
ere's my issue I've got an 80GB SATA drive and a 320GB IDE drive, I've already installed Windows 7 on the SATA drive. 80 is too small (in my opinion) to dual boot openSuse and Windows 7. Can someone explain me how to use a partition from the 320 IDE to install openSuse, and how to setup grub so I wouldn't have any problems booting to Windows?
View 4 Replies View RelatedI Need instructions on how to create a dual boot with Windows 7 already installed ...
View 2 Replies View RelatedI am new to linux. I tried and failed. I need some help on Creating patitions (I think it is root, swap and home).I have HP laptop with WIndows 7 installed. I have shrink the volume to allow Linux installation. I have three partitions, first one is windows boot - about 100MB. Second one is about 110GB and it has windows 7. Third one is UNALLOCATED space of 110GB that I intended for Suse.
Now I am going to install the Suse. The unallocated spaces should be "primary" or "extended"? Also, should I divided this new partition in to three partition? If does, what are sizes for each? I want to learn Linux so I will able to look for better job. This is the first time I ever look into linux and confused.
I have a laptop with a small (dual boot) hard drive. It is a dual boot with Windows XP and Open Suse 11.1. I want to remove Suse Linux but keep the Windows side. I need to keep that Windows drive just the way it is. I have OpenSUSE 11.2 installed in another laptop and want to keep them separate. I don't want to damage the proprietary program on the windows side. My challenge is I do not have aa Windows install CD, I do have the recovery disk that came with the Laptop, but this DOES NOT include the Proprietary program I want to keep. Is there a way to remove Linux from this dual boot drive without erasing Windows?
View 9 Replies View RelatedIt's time to update 10.1 in a box that dual boots (GRUB .97) with Win2003. A compete overwrite of 10.1 with 11.2 is the plan. I want to move to ext4 as well and am looking for the least painful, most productive method to achieve this. I'm done with 10.1 and enjoyed using it, but it is time to advance. Here is what I have to work with:
Code:
# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda10 ext3 20G 7.5G 12G 41% /
udev tmpfs 1014M 192K 1013M 1% /dev
[code]....
My initial experience with 10.1 installer recommendations were not favorable, probably because i'm used to windows and weak on Linux. This leads me to the query, should I: use the 11.2 install disk and trust it's (and mine) ability to tweak to my specs of overwriting 10.1? - or - gpart the appropriate partitions and the 11.2 installer fills in the blanks?
I've been wanting to start using Linux for years now and after doing some research on which distro to use, I've decided to give it a try with openSUSE and ordered a DVD copy from Novel last night. Needless to say, I'm a newbie to Linux. I'm building a new computer with two identical hard drives and I'd like to install openSUSE and XP on them and hence make a dual boot system. This is also going to be my first time setting up a dual boot. So, while I'm waiting for the openSUSE DVD to arrive, how to actually set it all up?
View 6 Replies View RelatedI wish to add more OS to my dual boot system with suse (sda) and windows7 (sda). The plan is to add Linux Mint(sda), PC BSD (sda), Fedora (sdb) and Solaris (sdb). I wish to remove grub2 from mint and install grub legacy, not sure whether it will work or not. I will be reinstalling grub from suse dvd. It gives me a free hand for adding boot entries. I wish to know whether I can remove grub2 and install grub legacy. In grub2 all boot related folders are stored in more than 1 place like /boot and /etc and subfolders.
View 9 Replies View RelatedI have just installed OPENSUSE 11.3 from a CD to a computer running WIN XP. The installation completed and I got to a desktop. I then shut down. When I restarted the computer with the installation CD removed from the drive, I got the message "missing operating system". I ran the installation again, and have left it running. As near as I can tell, the WIN Partition is still intact, but I'm afraid to shut it down for fear I once again will not be able to access either system.
View 4 Replies View RelatedYesterday (Sept. 28) I managed to install openSuSE 11.3 on my Toshiba Satellite Pro C650 laptop, side-by-side with Windows 7 which was pre-installed. In brief I'd like to report the problems I had encountered up to yesterday.
1. Upon inserting the DVD and after the start of the installation the system would take me to non-GUI (Text) Mode and would finally respond with the message: "No repository found."
2. After that I tried to install openSuSE 11.2 and 11.1. There, although the installation went through smoothly, I had to deal with a new problem; when I selected to boot Windows 7 from the grub menu the system responded with the message:
rootnoverify (hd0,1)
chainload +1
BOOTMGR is missing
Upon booting the computer from the DVD with the Linux OS and before I hit ENTER I changed the Kernel by hitting F5 (or whatever key corresponds to Kernel at the bottom of screen) to "Failsafe mode". That did the job. The installation started and ended smoothly. Oh! one other thing I did is to edit the preselected disk partition and delete the swap partition since the disk has to have four and not five partitions.After that, I became root and edited "/boot/grub/menu.lst" file to correct the "(hd0,1)" for the Windows 1 to "(hd0,0)" since it is the first OS.
I am very much excited to try out openSUSE 11.3.. But i am very much afraid of losing my data in windows partitions without knowing the exact procedure to install it..here are my existing partition list... Please have a look at it and suggest me..
c : 40 GB
d: 120 GB
e: 140 GB
f: 140 GB
and i have some free space of 28 GB.It is unallocated.I want to install openSUSE into this free space.Now please tell me whether i can proceed with the default disk configurations given at the install time or do i have to modify and adjust the partitions or do i have to create partitions for the available free space.
