General :: Install Dual Boot Without Cd Drive Or Bootable USB On XP System?
Apr 16, 2011
My Toshiba Satellite 5205-S705 laptop with Win XP Home sp3 has a non-working cd drive, is riddled with viruses, and isn't capable of booting to a USB drive. (please no comments about paperweights etc., it's all I have!) I want to install a Linux dual-boot version that is heavy on antivirus scanning support. Since I can't boot to an .iso disk, is there any other way to do this? I can transfer files to it via USB thumbdrive or download via Internet.
I just got a new hard drive and need to transfer my dual boot window 7/Ubuntu 10.10 onto the new hard drive and be bootable. Is there an easy was to do this?
Have older system, self-built around 2000 or so. My plan is to optimize the system for speed and utility, upgrade the OS from W2000 Pro to XP Pro, and include dual boot so as to install some version/distro (?) of Linux to learn on. Present system: X86 based (32 bit), using a P4, 1.8 GHz/400 MHz fsb, with 512mb of DDR RAM installed, can upgrade to 2 gigs total.Shuttle MV42 motherboard, including onboard video and sound (S3 Graphics ProSavage DDR P4M266/VIA 8751/8233 chipset, VIA AC'97 Audio Controller, 2.2 compliant)
If I should decide to use the available 160 gig drive as a dual boot system, in order to install both XP and some version of Linux, how should I set it up? How many partitions will XP and Linux need or work with best? How much space for each OS? What file systems? Should I format/partition it with the existing W2000 OS? What comes first, the chicken or the egg? (XP or Linux?) I have read somewhere that it matters which OS is installed first, due to boot records being overwritten by successive OS installs. I plan to keep W2000 on the first HDD at least until I move my files over to XP. Will I need to switch the master/slave designations after installing XP and Linux on the new drive, since I will want to boot from that drive?
I'm trying to get a dual boot system. [URL] So i'm just following it. But but when i try to load Linux from the NTLDR i just get this error: BootPart 2.60 Bootsector (c) 1993-2005 Gilles Vollant [URL] Loading new partition Bootsector from C.H. Cannot load from harddisk. Insert Systemdisk and press any key.
I used to know how to access and rw other linux drives and do the fstab magic. For some reason I've lost my touch. I just want the drive to automount and have full access. I don't need a beginners tutorial on mkdir and fdisk -l. Is there a foolproof way to get my drives to do what I want? I dual boot fedora and ubuntu, but have the same issues on both.
I have an Intel Core2 Duo system that I want to upgrade from Fedora 12 to Fedora 14. I have downloaded the DVD iso for Fedora 14, however, I do not want to burn a DVD for installation, and would like to be able to perform the upgrade from a USB flash drive. Where can I find information that will explain how to make a bootable flash drive that can install Fedora 14?
I just recently installed ubuntu 9.10 in my upstairs computer. It is a single boot system.Downstairs I have a dual boot system. I have windows vista and ubuntu 9.10 installed. It worked fine. I wanted to make this a single boot system and uninstall ubuntu 9.10. I cannot get rid of the grub bootloade
I have a laptop with a small (dual boot) hard drive. It is a dual boot with Windows XP and Open Suse 11.1. I want to remove Suse Linux but keep the Windows side. I need to keep that Windows drive just the way it is. I have OpenSUSE 11.2 installed in another laptop and want to keep them separate. I don't want to damage the proprietary program on the windows side. My challenge is I do not have aa Windows install CD, I do have the recovery disk that came with the Laptop, but this DOES NOT include the Proprietary program I want to keep. Is there a way to remove Linux from this dual boot drive without erasing Windows?
I've been wanting to start using Linux for years now and after doing some research on which distro to use, I've decided to give it a try with openSUSE and ordered a DVD copy from Novel last night. Needless to say, I'm a newbie to Linux. I'm building a new computer with two identical hard drives and I'd like to install openSUSE and XP on them and hence make a dual boot system. This is also going to be my first time setting up a dual boot. So, while I'm waiting for the openSUSE DVD to arrive, how to actually set it all up?
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured while installing GRUB ver 0.97 (640k lower/3072k upper memory) [minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename] grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5) Error 25 disk read error grub> quit
I have a 160Gig and a 40 Gig drive.I would like to install the system on the 160 Gig, and use the 40 Gig drive as a storage for backups or whatever.It appears in the installation process that I am required to use a mount point, which would then turn the drive over to the root system, which would not allow it to be totally available to me.I just want to format it to ext3 filing system.Coffeecat, if you are out there and see this, strange things are happening to the 40 Gig drive - it says it is using 2 gig, but it is totally empty of all system files, hidden files, trash, etc. and it is being imaged in the media folder in root. I believe I have messed this install up to the point of no return and think I should go ahead and start over.
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
I wish to add more OS to my dual boot system with suse (sda) and windows7 (sda). The plan is to add Linux Mint(sda), PC BSD (sda), Fedora (sdb) and Solaris (sdb). I wish to remove grub2 from mint and install grub legacy, not sure whether it will work or not. I will be reinstalling grub from suse dvd. It gives me a free hand for adding boot entries. I wish to know whether I can remove grub2 and install grub legacy. In grub2 all boot related folders are stored in more than 1 place like /boot and /etc and subfolders.
I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
finally got mostly everything fixed on my opensuse 11.3. 11.3 is my only os on my laptop right now and I want to be able to dual boot with backtrack4. I used to have bt3 but it was on a usb loading up with winxp. Anyway, I've downloaded the iso image and after hours of forum reading I figured out how to mount the iso image. Doing so allows me just to look at the files. Is there an install file somewhere I'm missing?
Also, couldn't ever figure out how to partition my drive to make room for bt4. Tried downloading gparted and failed. Tried using the expert partitioner program that came with this system but it won't allow me to create another partition. Couldn't ever find a reason why. Will bt4 allow me to create a partition upon installation? How do I install?
Installed ubuntu 10.4 over previous ubuntu on Intel 945G. After installation and reboot the system does not boot: "no bootable device - insert boot disk and press any key".
Installation was done from USB-stick, prepared by UNETBOOTin. I have two HD's, one used for system + storage, another one just for storage. I manually deleted previous system partitions of previous ubuntu install in system HD. The system HD had about 1/3 of free and unallocated space for system partitions, which ubuntu installer created during the installation.
I tried to reinstall grub from bootable USB-stick and it succeeded but it did not help. The system is still not bootable.
I have used ubuntu for years and never happened something like this. Am I missing something or is ubuntu missing something???
HW failure is ofcourse possible but I am quite skeptical about it because Live ubuntu from USB-stick works well.
I am currently rebuilding a couple laptops and a desktop to dual boot Windows and Suse 11.2. Windows is installed on partition 1. On the laptops, the build goes fine and dual boot with grub is OK. No issues. But on the desktop, the exact same build (after all the on-line updates, etc) fails with "Operating system not found" on the final (and first) boot. It seems that the Suse 11.2 build is somehow resetting the active partition and the boot does not see grub or Windows. When I reset partition #1 back to "active, only Windows loads. So I guess I need to fix this by reinstalling grub. Or use the Windows boot loader.
(1) Where is grub located on my system?
(2) What partiton is the Linux master Boot record If I wanted to use the Windows boot loader and do the following command to grab the 512 bytes I need:
dd if=/dev/sna? of=grub.bin bs=512 count=1
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
I just installed SUSE 11.2 as dual-boot with WinXP on an older system that has a 160GB PATA drive and a 500GB SATA RAID drive. I left about 80GB on the PATA drive unpartitioned to accommodate SUSE. During the initial installation attempt, SUSE was determined to install on the RAID drive instead of the PATA drive, so I disabled the SATA drivers in the BIOS to force the installation on the PATA drive. This was successful, but now there is no access to the RAID drive from SUSE because there is no driver and it is not mounted. I reactivated the SATA drivers in the BIOS and the RAID drive reappeared in WinXP with everything intact. The SATA drives now appear in SUSE under Hardware Information as "/dev/sdb" and "/dev/sdc" and the listed driver is "sata_sil".
So how do I get the RAID drivers installed in SUSE and then mount the drive so it can be browsed/modified from Dolphin? I would also like to be able to browse/change this drive from other computers on my home network through samba, just like with WinXP.
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
So heres the thread i had a while back ( url) that had you guys help me setup the pretty standard dual boot of Win 7 and Ubuntu. I have 2 hard drives, main one (640gig) and backup (80gb). I have Win7 installed on the 640 and ubuntu on the 80.
So i have tried installing the SP1 twice today and it has failed. When i click on details on why it failed, it says: url
I can only imagine that this has to do with my Dual Boot. Is there anything i can do or am i stuck? I THINK that my grub and master boot and all that was on the second hard drive and it is the first drive in line to boot up...so i thought i wouldnt have any issues. Not totally sure though.
Im tempted to just remove Ubuntu, its cool to say i have it, but i honestly havent loaded up onto it more than 5 times since i installed it. When you have windows already...its near impossible to want to get onto a free OS that doesnt have the codecs or programs and im not familiar with it. If it was all i had though, (aka didnt own Windows) then obviously it would be my main OS and im sure id love it and have is customized and perfect.
I am having 320G of HDD , on the HD i m having 40G free space when i m trying to install rhel5.4 in the free part it is showing me this error
Could not allocate partitions as primary partitions: Partitioning failed: Could not allocate partitions as primary partitions.Not enough space left to create partition for /boot.
I have a machine with 2 hard drives, one with Vista installed and the other empty, ready to host an Ubuntu installation. I want my system to dual boot. When I boot via the Ubuntu 10.10 CD I am presented with two choices : install Linux to SCSI1 (0,0,0) (sda) using the entire disk, or to SCSI2 (0,0,0) (sdb) with 50% of the disk designated as Files and the other 50% designated as Ubuntu. Which one do I choose?
I've decided that I want to use another, smaller, hard drive for my OS and I'd like to clone /dev/sda onto /dev/sdc. I want it to be an exact clone except my partition for my "/home" will be smaller (since there's not room for it). I was gonna try with dd but I'm not sure if I should build the partition table and use dd-command on one partition at the time? Will this then include GRUB boot loader and will it be working properly?
Do I have to clone the disk completely for it to boot properly? I'm not sure how or where GRUB places itself on disks as you install it. Can I perhaps copy the partitions one by one and then install GRUB from CD afterwards? Should I leave some unallocated space somewhere in between the partitions as I build and clone them?
I have my old laptop TravelMate 2413NLMi 1GB RAM. My Cd drive works not well on most of the CDs. I don't know how it picks Win2K3 cd but in that also it gives problem. After some break it picks it up. Installed win 2K3 server successfully from CD Drive. That Cd is old and very good quality. Later I downloaded ubuntu iso 32 /64 both when I heard about dual boot via wubi. I wrote the ubuntu-10.10-desktop-i386 iso on 2 CDs with fastest and slowest speed both on my new laptop but that Cds not worked in the old laptop cd drive. Also my laptop not support USB as boot device in boot sequence. So USB install via usb creator cannot work. I also verified that Iso are fine by installing on someone else's desktop PC. Those cds work well there.
Back to my laptop: Then I copied all Cd content in a folder on desktop of Win2K3 with the help of my new laptop CD drive and usb drive I have. I run the Wubi on the desktop of Win2k3. It run successfully and in the end asked me to reboot. I rebooted. I got the 'Ubuntu' option on booting. I selected and came into it. After that ubuntu splash screen came and then following message displayed on screen
The Error: mount: mounting /dev/loop1 on //filesystem.squashfs failed: Input/Output error
I got it this is due to the dead/faulty cd drive which ubuntu not able to mount. Now tell me how to install ubuntu further with the UI. Is there some special command to do this going in Grub pressing 'ESC' because the already specified modes have some commands on pressing 'e' there. Some way if I can use iso in that environment copying from USB. I need commands for that. I want to see ubuntu in action. I used lot of my bandwidth to download this iso files but still not able to see it in action.
