Ubuntu Installation :: System Freezes On Boot Up In 10.04?
Aug 27, 2010
Im running desktop dual boot system with two hard drives, one with Windows XP and the other with Ubuntu. Ive had no problems with this until now when I upgraded from Hardy to Lucid. Now I have problems with the system freezing on boot up.
Sometimes it will boot just fine, and at other times it will freeze before the login screen appears. When it does freeze, there are flashing lights on the keyboard and the floppy disk light (yes, its an old computer) is lit constantly. The only thing I can do is switch the computer off and hope it will boot up properly the next time.
When I did the upgrade there were a couple of files where the program asked if I wanted to keep the custom file or overwrite it with the maintainers file and I chose to keep the custom one. I THINK one of them might have been GRUB, but Im not sure.
Has anyone had a similar experience and were you able to cure it? I have seen a thread where people have had the system freeze on them, but Im not sure its QUITE the same thing.
Ive also done a clean install with Lucid on my laptop and have had no problems. The laptop is only running Ubuntu.
Im also wondering if reinstalling Grub on my desktop would solve the problem.
a. If so, would it still show both operating systems?
b. How do you do it?
View 2 Replies
ADVERTISEMENT
Dec 4, 2010
I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
View 3 Replies
View Related
Sep 1, 2011
After a hardware freeze, my system boots directly into the Ubuntu screen with 5 dots and hangs. Booting into recovery mode loads the tools menu then freezes before I select anything. The system still boots and runs windows 7 from the same hard disk just fine. I've booted a live cd and run file system check on my ext4 partition and it says it's clean. I can mount the volumes and read the data, just can't get the os to boot.Any suggestions before I backup and reformat?
View 1 Replies
View Related
Jul 17, 2011
Every once in a while when I turn on my computer it freezes on the purple screen after the screen where you choose the operating system. When this happens the keyboard doesn't work and I have to hold the power button. Also I think this might be connected to the problem I had when I was running ubuntu from the live cd, which was freezing after choosing the option of "trying" the OS before installing. I'm using an HP Dv7-3112sa and am running the default 64bit ubuntu from the website.
View 6 Replies
View Related
Sep 7, 2010
I love opensuse as it's much snappier than MINT. But my system 11.3 is freezing while booting. I pressed ESC during splash and can see messages on the screen. The last message is ATA3 Exception EMASK. I have uploaded the /var/boot.msg here klogd 1.4.1, log source = ksys - Suse Freeze - CuQAd3dg - Pastebin. There are no other log files!
My system:
Intel Core2duo
Mother board Intel DG31PR
Intel integrated graphics G33
3 GB DDR2 RAM
250 GB SATA2 Hard drive
View 7 Replies
View Related
Jul 6, 2010
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
View 9 Replies
View Related
Dec 7, 2010
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies
View Related
Mar 14, 2010
After successfully upgrading from 8.04 to 8.1 (where even my wireless worked for the first time) I got a system freeze when I tried to upgrade to 9.04.
I suspect the graphics driver but don't know how to upgrade without X running. After booting in generic mode (kernel 2.6.28-1 I can log in the shell but am lost without the GUI.
View 2 Replies
View Related
May 9, 2010
I had Ubuntu 9.10 .. upgraded to 10.04 LTS... i dunno if its the ati driver or what but when im on wine the games runs fine for a couple of minutes.. 5 to 10 maybe and then the whole system freezes.. cant close cant do anything... the mouse moves though .. and the sound keeps looping, thats if i use OGG on wine insted of ALSA... This looks like it should be on the wine segment but i dont think so... I mentioned wine cuz ATM wine is all i got on this pc as for games.... im downloading urban terror to see if it freezes too...
I remember that right after i finished installing ubuntu 9.10 i upgraded it right away to 10.04 without having the ati drivers installed, after the installation finished... the boot up logo from ubuntu with purple background was at its normal size as usual... But once i installed the drivers.. the ubuntu boot up logo or whatever its called went all BIG like if it was using another resolution, though once it finishes loading, the resolution goes back to normal when in login screen and desktop.
HOw do i remove the drivers completely? do i have to restart after removing them so i can install new drivers? should i use propietary drivers from amd site or the one found by system--- hardware drivers??? why cant i find envy at synaptics?
View 1 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
May 11, 2011
I have been a happy Ubuntu user for several years. But I am stuck with version 9.10 because of a persistent problem with random lockups with both mouse and keyboard. A search on the forums both within and without the Ubuntu community shows that a lot of other people have this same problem. There have been a lot of suggestions given and I have tried everything I could find, but without success. I have tried clean installs of vs. 10.04, 10.10, and 11.04 but all have the same problem.
The computer will work fine for a few minutes to a few hours and then just lock up. The only way out is a hard reset. Someone suggested that the latest versions of Ubuntu have a problem with some of the newer Intel chipsets, but I don't know enough to be able to say one way or the other. I am running an ASUS P7P55D motherboard with a 4 core Intel i5 processor and an Nvidia graphics card. I have tried the latest version of the bios for the P7P55D but that hasn't helped either. Vs 9.10 is no longer supported and I am being left behind.
View 5 Replies
View Related
Feb 24, 2010
My system freezes every time I install "Drapes",why?
View 4 Replies
View Related
Feb 5, 2011
I was running 10.04 with no problems. Upgraded. I may or may not have lost power before the upgrade was finished. Now my system locks out the keyboard and mouse on the login screen...nocapslock light or anything, but I know it's still running because the clock at the bottom increments once per minute. Booting safemode does not help, it simply hangs at some point on the scrolling black screen instead.I can boot 9.04, which is still installed on another partition, just fine.Is there any way I can boot to a terminal and try running apt-get again, to see if I can fix whatever's wrong?
View 1 Replies
View Related
Sep 4, 2010
I've just done a clean install of 10.4.1 onto a Compaq Pressario Desktop, which earlier had 8.04, upgraded online to 10.04.1.Repartitioned and installed from an iso disc, checked for Md5sum.All seemed to go as per text book, but when the system starts there is a momentary error message"no suitable mode""no command terminal found"It then proceeds to show the default purple hazy background, but stops there, with no other parts of the normal desktop, icons etc .After about three minutes, it goes black, and if I then hit the enter key, or move the mouse, it displays the log in window and asks for my password.I enter this, and again it reverts to the purple haze.This cycle repeats.I've checked the boot order to boot from the hdd first, so I'm stumped as to what to try next, apart from going through the whole install process again
View 9 Replies
View Related
Jan 27, 2010
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
View 1 Replies
View Related
Nov 1, 2010
I have tried 4 times now to install but it keeps freezing. I wiped my hdd with a tool from UBCD and im starting fresh with a full install of Ubuntu 10.10.I'm installing from a LiveCD. Should I format the hdd in some way before install?
View 5 Replies
View Related
May 27, 2011
I tried installing F14 and F15 but display resulted in freezing. The display would work upto "Check Media/Skip Test" for media during installation and the system freezes immediately after that. So I did a VNC installation from another system. But the initiation of X would always result in hanging of the box. After googling and trying various solutions, I found a ray of hope in one solution which suggested adding "vesafb:mtrr,ywrap vga=0x318" to the kernel arguments. This resulted in displaying successfully the boot-time flash (Fedora logo being filled with white color) during booting. But "startx" or "inittab 5" result in hanging of the system.
The following is the relevant information:
I see 5 monitors and 5 cards!
Code:
# lspci | grep ATI
09:0c.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
09:0d.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
Code:
# cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
Screen 4 "Screen4" RightOf "Screen3"
Screen 5 "Screen5" RightOf "Screen4"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection .....
View 2 Replies
View Related
Jan 11, 2010
I have been getting squashfs errors in the live usb created by various means(unetbootin,usbcreater,pendrive linux software).
There seems to be no error in my media or my hw. I have tried both 32 and 64 bit versions and the md5 sums of both match with the hashes given online. I havent yet tested with a compact disk, but i am sure the hw is working fine (it just booted 9.04 from usb..)
I have tried a few boot options [URL] to no avail. Also by turning off the quiet mode during boot, I see that the a few errors are "Unable to read from /dev/sdb" which should be the usb drive itself.
I will try a CD now, but my cd drive is not working. I hope to get a usb drive and boot from it.
View 2 Replies
View Related
Aug 23, 2010
Linux newb here. I was looking for a lightweight distro that I really like and Lubuntu was it. I installed in on all three of my comps with out issues and my old Dell desktop(512mb ram) is flying now. Way faster than XP even right after a fresh install of both on the same desktop. On my fourth install, my girlfriends old toshiba laptop, it installed fine. After the restart and reboot it gets to the Lubuntu logo with the 5 dots under it. It gets through 4 of the dots then freezes. I left it for 20 minutes and it was stuck.
I tried booting from cd again and check disc for defects. It said it found 2 files with errors, press any key to reboot. Which I did and it just booted right back into the freeze. Maybe since I have to manually make it boot from cd every time it was wanting to boot back into the CD after the disc check, I'm not sure. I tried burning a new iso on a slower speed, same thing for a total of 3 reinstalls with the same effect. The only thing different about this install compared to my others is:
A) I had to flash the bios from windows before I started to even get the damn thing to be able to boot from CD
B) I decided to just wipe XP and install Lubuntu on the whole drive.
View 9 Replies
View Related
Sep 1, 2011
I am attempting to boot Ubuntu off of a USB drive. The USB drive was created via the USB creator in the .iso file dowloaded from Ubuntu. But for some reason when I go into my BIOS and boot from the USB drive, it spits out one line of syslinux and copyright information ending in "et al" and then a flashing cursor but doesn't go any further. I would provide a screenshot but that isnt an option at the moment with not being able to get past the first line of booting. Also, I have never used Ubuntu as this is my first attempt at running it and it is obviously not going the best.
View 1 Replies
View Related
Jun 24, 2009
I upgraded from FC10 to FC11 yesterday.I had no problems using FC11 after I looked into the bootloader (not intuitive - Ha!).Tried to boot up this morning; and things seemed to work well until I tried to call up Firefox (added a few themes yesterday).The window pops open; but the computer freezes on the spot with an alarm (generic "beep", w/o the finishing "p").Tried it with Epiphany; and I get the same results with the exception of actually getting to the Home Page.Yum works for the most part - I reinstalled Firefox (no effect); but couldn't reinstall epiphany (keeps saying "there is no such package - did you mean 'epiphany'". No typos on my part - go figure). Doing Software/Package Updates (via System Menu) freezes the box as well.Did it with the system monitor on. It doesn't appear to be related to CPU Usage.
Had a FC10 liveUSB and used it for awhile (e.g. to check out the forums). After giving my ISP some grief about downloading speed, immediately received a note from their Abuse Department, saying that my machine had been infected with a virus and had been sending spam emails (post upgrade to FC11).
View 14 Replies
View Related
May 22, 2010
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
View 9 Replies
View Related
Dec 8, 2010
Ok, so I just finished correcting my driver issue with my wireless card when I'm struck with another problem....after gaining access to the net and updating my packages, ubuntu fails to boot up. It freezes at the boot screen where it runs the 5 orange dots with the ubuntu logo.
View 1 Replies
View Related
Mar 25, 2011
I'm having difficulty upgrading from 6.06lts to 10.10.
I have downloaded and burnt a cd, however it freezes on any option from the boot menu. I've tried the various options to no avail.
So i then tried a frugal install using unetbootin however when I try bootin through that using the 10.10 iso it comes up with this
Code:
My computer cannot boot from a usb. I have tried.
View 9 Replies
View Related
Jun 28, 2010
I am trying to install ubuntu netbook edition on my Acer aspire one D150. I have tried to do this before with version 9 with no luck so I waited until 10 to see if the problem goes away; apparently it has not. I put the ubuntu install files onto a USB stick according to the instructions from ubuntu here for windows (I have windows xp on the netbook now).
When I shut the PC down and turn it back on with the USB key inserted, the laptop just seems to hang at the ACER splashscreen. This screen is where I could press F2 for setup or F12 for boot order; the buttons do not respond, the USB key appears inactive. Again, it just seems to hang. I've waited for as long as letting it run all night to see if it goes anywhere by the morning with no luck.
View 2 Replies
View Related
May 26, 2011
tried to install 11.04 using wubi and wouldnt work so created a boot disk and did it that way: the boot disk loads but it freezes after the loading dots
View 6 Replies
View Related
Aug 16, 2011
When I installed Kubuntu 11.04 using Wubi it did not load the Ubiquity installer like it normally does. Instead the boot screen (image attached so you know what I mean) remains displayed for the entire installation. The installation works fine once installed but I was wondering if this is normal or not?
View 2 Replies
View Related
Jun 8, 2015
I am attempting to get Debian+Mate running on my laptop, with no success. I have not yet used Linux, but I do wish to climb out of the Window, and the Live session seems ideal to get a feel for Debian before finally abandoning Windows.
I got the Debian+Mate ISO file from the Debian website, and created a bootable USB stick. (Note : I have done this several times, getting new ISOs, and using Unetbootin, Universal USB Installer, and Linux Live installer; the result is always the same.)
When I boot the USB drive, all appears good at first. I get to the Debian (or Mate?) screen which is a pale jade green with a white squiggle in the middle region, with a panel at the top; this shows at left three options - applications, places, and system; and at right the correct time, a sound symbol,the wifi symbol, and a battery indicator. At the left of the screen in vertical arrangement there are 4 icons labelled computer, users home, install Debian Sid, and trash. On the bottom panel, at left there is a "button" for "click to hide all windows & show desktop", and at right 4 squares for workspaces.
There are also (temporary) windows that inform me that the battery is no good (I run on mains), and that there is no wifi connection established. These windows disappear in a minute or so.
The cursor moves ok. The only actions that it creates are the information drop-down texts that tell me what the headings mean - e.g. no connections when I hover the cursor above the wifi connections symbol.
But whatever I attempt to do - selecting any of the options - nothing happens. Everything except the cursor appears to be dead.
The machine that I am using is an old laptop that I use as a second computer. It has a SIS Mirage 3 graphics engine, which I gather may be a problem. I also tried the same procedure with my fairly modern ASUS laptop (NVidia graphics) with exactly the same results; it seems that NVidia graphics may also be problematic, judging from some posts on the web. I have also tried Debian+Cinnamon, again with the same outcome.
View 5 Replies
View Related
Aug 2, 2010
I have a debian system that's freezing in the boot sequence at "Setting system clock".Several sites I looked at recommended changing the init scripts to disallow hardware access to the clock. But, I can't boot! Is there a parameter I can pass to the kernel at boot so that it will skip init scripts?
View 2 Replies
View Related
May 22, 2010
I'm trying to install ubuntu from a disk I got with a Ubuntu manual magazine, but once I choose the install option, the logo glows for a couple minutes then freezes and nothing happens. The same happens for running it without installation. Does anyone know what I should do? I'm currently downloading it onto a USB stick to attempt to boot it from that.
View 4 Replies
View Related
