Ubuntu :: 11.04 System Freezes During Boot
Sep 1, 2011
After a hardware freeze, my system boots directly into the Ubuntu screen with 5 dots and hangs. Booting into recovery mode loads the tools menu then freezes before I select anything. The system still boots and runs windows 7 from the same hard disk just fine. I've booted a live cd and run file system check on my ext4 partition and it says it's clean. I can mount the volumes and read the data, just can't get the os to boot.Any suggestions before I backup and reformat?
View 1 Replies
ADVERTISEMENT
Aug 27, 2010
Im running desktop dual boot system with two hard drives, one with Windows XP and the other with Ubuntu. Ive had no problems with this until now when I upgraded from Hardy to Lucid. Now I have problems with the system freezing on boot up.
Sometimes it will boot just fine, and at other times it will freeze before the login screen appears. When it does freeze, there are flashing lights on the keyboard and the floppy disk light (yes, its an old computer) is lit constantly. The only thing I can do is switch the computer off and hope it will boot up properly the next time.
When I did the upgrade there were a couple of files where the program asked if I wanted to keep the custom file or overwrite it with the maintainers file and I chose to keep the custom one. I THINK one of them might have been GRUB, but Im not sure.
Has anyone had a similar experience and were you able to cure it? I have seen a thread where people have had the system freeze on them, but Im not sure its QUITE the same thing.
Ive also done a clean install with Lucid on my laptop and have had no problems. The laptop is only running Ubuntu.
Im also wondering if reinstalling Grub on my desktop would solve the problem.
a. If so, would it still show both operating systems?
b. How do you do it?
View 2 Replies
View Related
Jul 17, 2011
Every once in a while when I turn on my computer it freezes on the purple screen after the screen where you choose the operating system. When this happens the keyboard doesn't work and I have to hold the power button. Also I think this might be connected to the problem I had when I was running ubuntu from the live cd, which was freezing after choosing the option of "trying" the OS before installing. I'm using an HP Dv7-3112sa and am running the default 64bit ubuntu from the website.
View 6 Replies
View Related
Sep 7, 2010
I love opensuse as it's much snappier than MINT. But my system 11.3 is freezing while booting. I pressed ESC during splash and can see messages on the screen. The last message is ATA3 Exception EMASK. I have uploaded the /var/boot.msg here klogd 1.4.1, log source = ksys - Suse Freeze - CuQAd3dg - Pastebin. There are no other log files!
My system:
Intel Core2duo
Mother board Intel DG31PR
Intel integrated graphics G33
3 GB DDR2 RAM
250 GB SATA2 Hard drive
View 7 Replies
View Related
Jul 6, 2010
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
View 9 Replies
View Related
Dec 7, 2010
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Dec 4, 2010
I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
View 3 Replies
View Related
Aug 2, 2010
I have a debian system that's freezing in the boot sequence at "Setting system clock".Several sites I looked at recommended changing the init scripts to disallow hardware access to the clock. But, I can't boot! Is there a parameter I can pass to the kernel at boot so that it will skip init scripts?
View 2 Replies
View Related
Sep 14, 2010
I have set up a server with Ubuntu 10.4. It always worked fine with 32-bit inside VMware. But on the production machine with 64-bit, it wasn't working well by now. I could now reliably trace the problem down to the "ubuntu-desktop" package. I have installed it (without the recommends) so all its depends are also installed. But as soon as that package is on the system, it freezes at boot time, on the page where CPU freq modules or AppArmor stuff is started. My server is an Intel Core i7, so it lists 8 CPUs for cpufreq. They're normally all listed in a line on their own, but when the system freezes here, the output is broken already. Sometimes it says that cupsd is started, or "Checking quotas", sometimes it stops after "CPU4", sometimes it prints out the lines "CPU0" to "CPU4", then "CPU7" in the same line followed by "[OK]". The system won't react on anything from then on except a hard reset.
As soon as I remove the package "ubuntu-desktop" (chrooted into the system from the rescue system), the OS on disk boots normally into the GUI logon. No problem at all anymore.
It took me a few days to figure out why it wasn't working. I first suspected quota, then a kernel upgrade. But the system booted well after each change on their own. Just as I installed all the graphical stuff, it stopped booting.
What's happening there? What am I supposed to to now? I need the desktop environment and the machine must be working by Saturday. Although the description of ubuntu-desktop says that I should not uninstall it because it's used for update management, I could now install it to get all its depends, and then immediately uninstall it to make the system boot up again. Is that a good idea? Shouldn't it be working without such hacks?
View 3 Replies
View Related
Apr 4, 2016
Happens on Jessie AMD64 with mate, I can't go to a tty to kill mate system monitor, mouse stop working, keyboard stop working. I tried changing the theme, and now it freeze opening mate system monitor.
View 0 Replies
View Related
Jun 6, 2010
I've trouble with booting up xubuntu koala:
When switching to the x11-login, the computer freezes during the change of the screen-resolution. Even switching to a console (ctrl+alt+F1/F2/F3...), ctrl+alt+del or pushing the power-button is not possible. After switching off the PC manually, it won't boot at all and freezes directly after switching on again (at bios-time).
Turning the PC off and on again helps - everything is okay afterwards. This doesn't happen always but it is annoying. Sometimes I have to try this procedure 5 o6 times until I can use the computer. Which of the thousand of log-files is the right one to look in? I am using Xubuntu and a Ati Radeon Xpress Graphics card, along with an AMD64 and the 64-Bit-Version of Xubuntu.
View 1 Replies
View Related
Sep 2, 2010
Ever since I made the switch to Ubuntu I have had a problem getting back to the X Windows environment from Virtual Terminals. Control+Alt+F1~6 work fine but when I try Control+Alt+F7 my screen freezes.
I have been trying to find a solution to this problem but it doesn't seem to be affecting many other users. Not sure if it matters, but I'm running 64-bit Lucid Lynx.
View 1 Replies
View Related
Jul 7, 2011
I'm now on 11.04 (64 bit on a desktop), but had the problem on 10 as well. I get the occasional complete system freeze. There is nothing in the logs indicating a problem and it is not the graphics card, as I cannot ssh in from another machine. It sometimes happens after three days of running and sometimes after 20 hours.
View 3 Replies
View Related
Jan 1, 2010
I've got an odd problem and was wondering if anyone had any insight. I'm on Ubuntu 9.10 on a Gateway E-100M and everything works great except for firefox. My machine will hard freeze about once a day when using firefox. The whole OS -- no mouse movement, no keyboard response, etc.I've switched to Chrome for weeks and I get no issues at all. I switched back to firefox and it hard froze within the first hour or so. I know it's unusual that an individual program would freeze the whole OS rather than just crash, but it seems to be a fairly consistent pattern.
View 2 Replies
View Related
Jan 18, 2010
I recently re-installed ubuntu to fix my freezing problem, but with no success. disc has no errors. I cleaned the disc and the cd drive, the cd burner has a problem installing while the dvd drive does fine. The computer is a HP Visualize X-class workstation with dual 1000mhz pentium 3s, 2 gigs ecc ram and a ATI AllinWonder 9700 pro @ 2x agp(wish was higher), on-board sound. So my problems are:
1) It randomly freezes within 24 hours regardless of who is logged in or if effects are on or what the load is. mouse is frozen too, completely unresponsive even ctrl alt f1.
2) My sound is screwy. its supported by alsa but i have to play with the volume to get sound and lots of times there are audio errors, it sounds like its robo-trippin. I have tried the sound guide.
3) Desktop effects only work with the user that logs in first. If I try to activate them when I switch users it searches for drivers then says it cant be enabled. not a priority.
Window xp works okay but the graphics drivers are giving me problems so i decide to do a dual boot.
I think I am going to put in a different video card. maybe its not all there, it got hot once when the fan died, put in a replacement and it worked but i see lines moving down the screen when there are blacks.
View 2 Replies
View Related
Mar 14, 2010
After successfully upgrading from 8.04 to 8.1 (where even my wireless worked for the first time) I got a system freeze when I tried to upgrade to 9.04.
I suspect the graphics driver but don't know how to upgrade without X running. After booting in generic mode (kernel 2.6.28-1 I can log in the shell but am lost without the GUI.
View 2 Replies
View Related
Mar 16, 2010
Don't know if this is a coincidence, but the other day we had a power cut and my laptop went off. When I tried to reboot it got to the ubuntu start up screen, but when it tries to get to the "desk top" screen it all goes blue and black flashes. I have XP and Vista on the same machine and these both start up ok
View 2 Replies
View Related
May 9, 2010
I had Ubuntu 9.10 .. upgraded to 10.04 LTS... i dunno if its the ati driver or what but when im on wine the games runs fine for a couple of minutes.. 5 to 10 maybe and then the whole system freezes.. cant close cant do anything... the mouse moves though .. and the sound keeps looping, thats if i use OGG on wine insted of ALSA... This looks like it should be on the wine segment but i dont think so... I mentioned wine cuz ATM wine is all i got on this pc as for games.... im downloading urban terror to see if it freezes too...
I remember that right after i finished installing ubuntu 9.10 i upgraded it right away to 10.04 without having the ati drivers installed, after the installation finished... the boot up logo from ubuntu with purple background was at its normal size as usual... But once i installed the drivers.. the ubuntu boot up logo or whatever its called went all BIG like if it was using another resolution, though once it finishes loading, the resolution goes back to normal when in login screen and desktop.
HOw do i remove the drivers completely? do i have to restart after removing them so i can install new drivers? should i use propietary drivers from amd site or the one found by system--- hardware drivers??? why cant i find envy at synaptics?
View 1 Replies
View Related
Sep 23, 2010
When I click certain links, such as the one below, Firefox consistently crashes.
The bigger problem is that when it does, everything grinds to a halt, and I have to press the machine's power button.
Is there a way to kill processes when the system locks up? This is on Ubuntu 10.04 Lucid Lynx, using GNOME.
Link to 2 MB PNG file (MAY CRASH YOUR BROWSER)
View 9 Replies
View Related
Sep 27, 2010
I am using Ubuntu Lucid and have a problem with firefox (V 3.6.10). It often causes the whole system to freeze nearly every time I access skypoker.com, sometimes straight away, and sometimes within a few seconds or a few minutes. The whole system becomes unresponsive, with only the mouse being able to move (not click). I haven't seen this problem occur with any other sites. This problem does not seem to occur when I use google chrome, but it does with Konqueror. Control + Alt + F1 is unresponsive, along with every other keyboard stroke or mouse click and the only way I can do anything is to restart the computer with the power button.
View 4 Replies
View Related
Jan 28, 2011
I am running Ubuntu 10.10 on a Lenovo Thinkpad T61p with 2GB RAM. When I was on Ubuntu 10.04, one day suddenly Azureus hung at the 'loading plugin' screen as it begins. I had to hard reboot my system and it(Azureus) never worked after that so I removed it. Then after a couple of months same thing happened with Adobe Acrobat reader. As soon as I opened any pdf and started to scroll, it hung. System didn't respond and had to hard reboot. I moved to foxit reader Then I upgraded to 10.10 and now mplayer hangs occasionally if I try to switch it to full screen. System stops responding totallyn Where to begin debugging from ? I can't figure out any pattern or any way to reproduce it. I haven't tried Acrobat reader and Azureus on 10.10
View 9 Replies
View Related
Mar 7, 2011
Is there something similar to the windows TSR thing in Linux? (terminate & stay resident)
The reason I ask is that after replacing my HD and reinstalling Maverick I've noticed the PC freezing up afew times. It seems that memory gets used up and then doesnt free up after the application is closed. The last couple of times this happened today I was doing
1. Copying a number of photos from my flash drive to the HD
2. Burnt a disk with Brasero.
After doing this it froze and I had to crash the system and reboot. I don't remeber this happening before.
Apart from this memory problem it's working OK I think. My system specs are below
Code:
mbdb@M2000:~$ sudo lshw
m2000
description: Notebook
product: Presario M2000 (EK823EA#ABU)
vendor: Hewlett-Packard
[Code].....
View 9 Replies
View Related
May 21, 2011
Beginning on the release day for Firefox 4, my system has been encountering hard freezes (no responsiveness to any key entry and only way to restart is by hitting the reset button). I had installed firefox 4 with no issue, but once it was open, it kept freezing my system. Some addons weren't supported anyways, so I uninstalled it and got back my 3.6. At the time I was using rtorrent, but within minutes of using it since the firefox install, my entire system freezes up.
Naturally I suspect HDD or RAM, but both have been extensively tested. Next I began browsing forums and found some tricks like turning off IPv6 or changing settings via HDPARM, but none have made any difference. I have moved on to using Transmission, and the problem still exists, but it occurs much less frequently.
I have also since then noticed that transfers of files from my 500GB OS/Torrent drive to my RAID 5 array and vice versa moves at 2-4MBytes/s, much too slow. So next I set up my torrent client to download directly to my RAID array, and lo and behold no freezes! Also, while transfering data the system moves at an absolute CRAWL, as in browser windows turning gray, saying that they have stopped responding, etc. I ran a fsck on my 500GB drive, which instantly told me my file system was clean. I'm at my whit's end here! I hate re-posting on a topic, but I feel like I've tried everything!
System Info:
Ubuntu 10.04 32-bit
Kernel 2.6.32-29-generic-pae
AMD Athlon 4450e
1GB RAM, 2.5GB Swap
Gigabyte GA-MA74GM-S2 Motherboard
[Code]...
View 9 Replies
View Related
Aug 1, 2011
We use Ubuntu 10.10 (32 bit) as a backup server.
The machine is quite ild but still working well.
All works very good but every few days it is crashed and freez.
I do not know what real happeny since i do not work on it, but tring to ping it fail and the monitor is blank.
What can I do?
Which log is relevant?
View 5 Replies
View Related
Oct 18, 2009
I'm running Ubuntu 9.04 side-by-side with Windows XP.
Today, all of a sudden my system kept freezing up, forcing me to manually power-down my computer. Well, I tried picking an earlier kernel to boot from and, sure enough, there was no longer a problem.
View 3 Replies
View Related
Jan 11, 2010
I am having audio problem on hp laptop having ubuntu 8.04 The problem is system freezes after opening any application which uses audio. I have tried <code> wget -O alsa-info.sh [URL] && bash ./alsa-info.sh</code> and it gave me [URL]
View 1 Replies
View Related
Jul 25, 2010
I'm building a new system, and yesterday I tried to install kubuntu, but could only get it running using the nolapic option (noapic is not nescessary, and noapic without nolapic won't work). Now I have the system installed but can only get it running using nolapic and therefore without SMP (which is a no go for most people, including me).
When I try to boot without nolapic, the system goes just fine through loading the kernel and kubuntu (that is, until the end of kubuntu's loading screen), but when it's done with loading it displays the login screen and freezes completely. No input or activity whatsoever. Sysrq keys seem not to work either.
I've searched for similar problems but had little luck so far. I'm using a ga-p55m-ud2 mobo, core i3 530 (2 cores with HT) and an HD5770 (if this is relevant at all). I was hoping some of you experienced users could suggest some kind of workaround to the problem (maybe the kernel is configuring the lapics towards a lockup?) or instruct me as to how could I know what the system was doing right before stopping, in order to locate more specifically what's the problem.
I've never used linux as my main operating system (trying to migrate to it now), but I have some notion of it, even though I don't quite know how everything works, so I might not be familiar with some commands or parts of the system operation.
View 1 Replies
View Related
Sep 10, 2010
I'm using ubuntu 10.04 and it worked fine but recently I'm getting the following message -
(process:343) GLib_Warning** : getpwuid_r(): failed due to unknown user id(0).
This message comes with a black screen and then no key stroke works and everything totally freezes. then I've to force restart using power switch. This message appears when I'm using internet. I'm using pppoe broadband connection. Without internet it works fine. I'm getting the same prob in Linux Mint 9. I've googled for this problem and almost everywhere it is said that this message appears in booting time and after a few moments everything becomes quite ok but my problem doesn't match with them. I don't get this message in booting time. I get this message when I'm on internet.
View 8 Replies
View Related
Oct 16, 2010
On Ubuntu 10.04 when there are more than just one user logged in, if one of users logs off system hangs with a black screen.
After I reboot the machine and log in again, just after GDM login screen I get a window with a message about PowerMeter crash, with suggestion to 'cancel' and 'log off'. Only 'Log off' works, i.e. I'm successfully logged in.
Last entries from system.log before system freeze are:
Code:
View 9 Replies
View Related
