OpenSUSE Install :: 11.2 Boot But Not Giving Up?
Jan 3, 2010
Cut the windows cord 6 months ago, and was up and running 11.1 almost perfectly. The only problem was the 3D desktop wasn't running, so I decided to upgrade to 11.2 . That appears to have been a mistake for two reasons, 1) the 3D graphics weren't running because I was only using the motherboard for graphics and 2) the upgrade doesn't like the onboard ATI graphics or the new ATI card that I've since bought.
Initially I was only getting a black screen, then after running the install repair it wouldn't boot at all.Bought the new video card, and tried some bad advice before trying to boot and disabled the onboard video to see if it would recognize the new card, then I was flying blind with no video. After removing the boards battery and resetting the bios jumper, I was able to boot with limited sucess, and I ran the repair tool several more times but was still unable to get to a command prompt.
I've now done a clean install with the new video card and now I can get to a command prompt but the boot is still being interupted. With some help I've also been able to run Yasta from the command prompt and install the latest (last weekend) updates.I get to runlevel 5 and it shows maximum number of X display failures reached.I'm using an AMD Athlon 64 X2 on a Biostar TA780G motherboard. I believe the motherboard uses an ATI chip and the new video card is a Sapphire HD 2400 with an ATI chip.
View 5 Replies
ADVERTISEMENT
Nov 20, 2009
I've been trying to burn Suse 11.2 to a DVD now for a couple of days but I keep running into trouble. When verifying a disk after burning Suse on it it keeps giving me errors. I've tried Nero and ImgBurn, different burners, different ISOs, different burning speeds (downloaded via torrent and http) but it keeps giving me the verification error.
The only thing I haven't tried is a different brand of DVDs but until now I've never had any problems with this brand.
View 9 Replies
View Related
Jun 1, 2010
I am using centos 5.System does not boot up. It gives a code 0078.
View 3 Replies
View Related
Jun 10, 2010
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
View 1 Replies
View Related
May 11, 2011
I am using emacs for editing. The problem is that it is giving me a lot of artifacts on the screen. Like the cursor movement leave black marks all over the screen. Cursor is sometimes not visible after movement. If I use highlighting current line then it also leaves artifacts.
View 7 Replies
View Related
May 29, 2011
I have an USB drive and I made a share with samba and accessed it from windows computer. I've been using openSUSE 11.3 with no problems.
Recently, I've installed openSUSE 11.4. Now I can't write to my USB Disk through samba.
It is formatted as ntfs.
samba log tells a lot of things.... for eg.:
Code:
[2011/05/30 11:46:54.148085, 2] smbd/trans2.c:5531(smb_set_file_dosmode)
smb_set_file_dosmode: file_set_dosmode of 1 failed (Permission denied)
[2011/05/30 11:46:54.148163, 3] smbd/error.c:80(error_packet_set)
[Code]....
View 9 Replies
View Related
Apr 29, 2010
I have a tar file but when I try to install it is giving error. Here's what I did.
Code:
tar xjvf live.tar.bz2
cd live
./configure
bash: ./configure: No such file or directory
I have build-essential installed
View 2 Replies
View Related
Aug 4, 2010
Is there any way to install .deb packages without giving root access?That it, I have root access, but I dont to give root access to the .deb package.This is for instance to install the .deb of SipderOak online backup took, or to install the .deb of openofficeWhenver available, I compile from sources, but sometimes only the .deb is available.
View 13 Replies
View Related
Aug 4, 2010
Is there any way to install .deb packages without giving root access?That it, I have root access, but I dont to give root access to the .deb package.This is for instance to install the .deb of SipderOak online backup took, or to install the .deb of openoffice.Whenver available, I compile from sources, but sometimes only the .deb is available.
View 14 Replies
View Related
Nov 24, 2008
I have a problem with the NTLM proxy we use in school. YAST proxy configuration won't work, it just says authentication error. We have to login with the user in DOMAINuser style and a password, in Firefox it works.
View 6 Replies
View Related
Jul 25, 2011
I have a problem with trying to connect to VPN over linux. From OSX and Windows the VPN connection goes through fine. It was working flawlessly, for the last one month I never used the laptop or the VPN, however after booting recently 1 week ago the VPN always show as timedout. Some details about the vpn / pptp connection details:
[Code]....
View 8 Replies
View Related
Mar 13, 2011
i have just updated to openSuSE 11.4 [64 bit]; rkhunter is giving these Warnings :
Warning: User 'rtkit' has been added to the passwd file.
Warning: User 'pulse' has been added to the passwd file.
Warning: User 'statd' has been added to the passwd file.
Warning: Changes found in the group file for group 'audio': User 'pulse' has been added to the group
Warning: Group 'rtkit' has been added to the group file.
Warning: Group 'pulse' has been added to the group file.
Warning: Group 'pulse-access' has been added to the group file.
Warning: Suspicious file types found in /dev: /dev/shm/initrd_exports.sh: ASCII text
Warning: Hidden directory found: /dev/.sysconfig
Warning: Hidden directory found: /dev/.mount
Do these look Normal, Are these False-Positives??
View 4 Replies
View Related
Apr 30, 2011
I'm running a hybrid graphics card (AMD Radeon HD 6630m) so naturally I'd like to have full functionality between the two.
Here's what I've done so far:
Downloaded the .run file from AMD's website
Built packages for both AMD and Intel side of the card
Unpackaged said packages
I used ATI Catalyst's GUI to install (in hindsight terminal might have been better and more informative) and it is now saying
After installation of the generated package, it is important to save your X Window configuration file, and then run 'aticonfig --initial' (in a console window) to complete the basic configuration, please run aticonfig from a console window or AMD CCC:LE from the Desktop Manager Menu
So how and why do i save my X Window config and when I give the aticonfig command it says no adapters detected
View 9 Replies
View Related
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
Nov 23, 2010
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
View 9 Replies
View Related
Nov 4, 2010
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies
View Related
Jan 4, 2010
does anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
View 4 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
Sep 29, 2010
I have a Dell laptop with Windows XP installed, and for various reasons (Help: I borked my WindowsXP boot when installing OpenSUSE 11.3) I can not install a GRUB boot loader to the first hard drive (hd0).
I currently have a second hard drive in this laptop with a perfectly working OpenSUSE 11.3 instance, but no way to boot into it. I remember back in ancient times, a common option with Linux distros was to create a boot floppy to boot into Linux rather than installing GRUB or LILO to MBR. Since this laptop doesn't have a floppy drive I'd like to do the same thing with a USB stick. Is there any way to install GRUB (or something similar) to a USB stick? What I am not asking here is whether I can put a full, bootable Linux instance on a USB drive - I only want a boot loader on USB that launches to the appropriate mount point on (hd1).
View 6 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Jan 31, 2010
I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
View 4 Replies
View Related
Jun 24, 2010
I'm new to OpenSuse and also fairly new to Linux in general. I installed OpenSuse 11.2 on a secondary machine and I really like it. However, during booting it stops somewhere half way, giving me only a black page but with a functioning cursor arrow. I can't do anything with it though. I re-booted in recovery mood and managed to boot up as root using the command 'startx'. How can I get back to "my own" log-in from here, with my own settings etc? There's obviously something missing during boot-up but where do I look?
View 5 Replies
View Related
Aug 5, 2010
I have been having a problem with my 11.1 recently, in that it gets stuck at a point in the boot process that tells me "INIT cannot execute /bin/sh" then it says "INIT: id 1 is respawning too fast please wait 5 minutes" and tells me there are no more preocesses in this runlevel and repeats this no matter how long I wait. Since I couldnt find any information on fixing that, I decided to just upgrade to 11.3 with a boot disc. Now my computer wont recognize the disc to boot from it and still gets stuck at the same screen.
View 3 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Jul 4, 2011
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
View 3 Replies
View Related
Sep 5, 2010
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies
View Related
Jul 18, 2011
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
View 9 Replies
View Related
Aug 31, 2011
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Jul 21, 2010
It would be convenient if i could simply install 11.3 along side my Ubuntu distro. I see yast enables me to reduce my sda1 and create a new partition, (sda3) However it offers to mount sda3 in /usr ? Could you offer me any advice please? My objective is to be able to select which distro from the grub menu.
View 9 Replies
View Related
