I have a tar file but when I try to install it is giving error. Here's what I did.
Code:
tar xjvf live.tar.bz2
cd live
./configure
bash: ./configure: No such file or directory
I have build-essential installed
my web host runs a linux server, and when i try to load a file in my browser (which i have uploaded in my web space) with non latin words it gives a 404 error (file not found). for example i have uploaded mydomain.com/νεο.html the word "νεο" is non latin. so when i try to reach this document from my browser i get the error.
I ahve configured MRTG to generate bandwidth utilization graphs of Network devices.
I ahve configured 30 Network device ( Cisco Switches and Routers), For most of the devices MRTG is working fine but for some devices it is not able to generate log file and giving the following error:
I have a bash script giving me the following error:
[Code]...
When I run it I am getting: ./svnup: line 61: syntax error: unexpected end of file Can't for the life of me figure out what is wrong. It's a script to export the latest revision from SVN to the web root folder and archive the previous version, basically.
I'm trying to setup a small network between my old and new laptops to transfer my personal data. They are now linked with a crossover cable and they see each other.The old one has a dual-boot setup with WinXp and Ubuntu 9.10.The new one with Win7 and Ubuntu 9.10.I tried samba but it was very slow even using Windows in both computers: maximum transfer rates were about 1,5 Mib/sec.I tried SSH using ubuntu on both pcs and it is reliable and much faster, 5 Mib/sec. But I wanted more...I installed the NFS server on the old one and exported the NTFS partition where my data resides with sync and ro options.
I installed the NFS client on the new one and i'm able to mount the remote partition.Now, when I transfer my files I get very high speed, more than 10 Mib/sec but after a while I get a "Stale NFS file handler" error but I really didn't touch any file in the old pc and the connection is always up.Searching on the web I found that NFS had some troubles exporting NTFS partitions in the past but should be fully compatible with them since the last versions of ubuntu.
I have changed nothing about the configuration of my checkgmail except for the icons. And yet, whenever I click on the subject of an email, it gives me a 404 error. When I use the links (delete, spam, archive, mark read) it does what it is supposed to do, but it does not allow me to view the content of a message. Does anybody have any idea of what could be causing this strange behavior? Gnome. 10.04. x64.
I have a Ubuntu 10.04 desktop VM that is running torrent software, and it is saving the files to a samba share (which is actually the host it is running on). I have also tested from another Ubuntu box on the network and it experiences the same problem.
The problem I am having is that any torrent client on a Ubuntu machine or VM can't save to the samba share, but a WinXP torrent client can download the same torrent and save to the share with no problem.
I created a public share, and the problem seems to be that I cannot edit files after I create them. It seems that samba is ignoring the create mask and creating files as rw-r--r-- instead of rw-rw-rw-
I even tried adding the "unix extensions = yes" option and that didn't seem to work either.
Code: [global] # map any unknown username to nobody so login succeeds, don't forget to run: # smbpasswd -an nobody # so that it will work!
I have been looking for a while now, but I keep getting 403's for maps but not for files... So if you go to http://gmod.ws/ you get the error but if you go to http://gmod.ws/index.php you don't.I don't see where the problem is.We're running a CentOS 5.5 box.
I'm trying to connect to a webdav server with very poor luck. My preference would be to mount it to my file system, but simply connecting with Cadaver would be fine too.
I've tried:
Code: mparks@mparks:~$ sudo mount -t davfs https://<host>:<port>/<path> /media/webdrives/<mount-dir> [sudo] password for mparks: Please enter the username to authenticate with server
I have an ipod shufle 2nd gen, and I have seemed to upset the format. I tried to format it in nautilus, and it gave me the: 'fat 32 format not supported' error.
now ubuntu won't recognize it, and the ipod shuffle is giving me a broken software error. I have a backup of the ipod shuffle, but how do I get ubuntu to recognize it so I can format it properly?
I am trying to learn it, understand it, and maybe even become proficient with it (one day... ). After trying a few different flavors, I settled on Fedora XFCE, and installed v14 (i686) in a dual boot setting with Windows. I am running it on an HP laptop.I have had an issue ever since I installed a rather large list of updates a few days ago. One of which was a Linux kernel update to 2.6.35.6-45.fc14.i686 (not really sure if that is significant, but I noticed the issue after selecting this kernel version in the boot menu). Now, anytime I try to add software, or run the update utility I get the error message:Quote:You have failed to provide correct authentication. Please check any passwords or account settings.
More Details:Failed to obtain authentication.There was no dialog to provide my password. I do understand there are alternatives to installing and updating software using yum, and I have been doing that a bit, however I would really like to understand why I am receiving this error. I have seen a few related posts as well as a some similar issues in a bug report, and testing session:bugzilla.redhat.com - 638344General a similar gpk-application issuecannot use Add/Remove software through VNCMy questions are:Is this a bug with one of the updates I downloaded?Is there a way to revert the changes from that update, or do I need to reinstall Fedora?Is this an issue with the User account I created? Is there a general set of options I should enable for myself as the primary user?
I have prepared a script which will login to each server and search for a keyword.I want output on same machine from where m running script.When i try to run command on any machine.. It works well.
I am having a weird problem here. The open programs are closing secretly without giving any indication or issuing error. For example I open couple terminal and some minutes later I look at my screen, boom they are not there anymore. This issue is not just limited to terminals, other gui apps suffer from the same thing. Does anyone know if any program or service would do such a thing?. I am scratching my head here to figure out why that is the case It just started happening today.
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
I had my server going pretty good. Two sites being hosted. Wilmingtoncoc and Mikealrhughes. Last night we had Thunderstorms and Tornadoes come through. While I was out Tornado chasing. We lost power here for an instant and back on. When I came in the server was off. So I booted it back up. The mikealrhughes site is still working good. The Wilmingtoncoc site is giving me a Database read error, it is a WordPress site. Also I can't log into the Server using SSH. Where do I start to repair the problem? Do I reinstall SSH if so what is the command I use? Then how do I solve the WordPRess Database problem? Also when I try and issue a command from the Server with sudo in front of it I get an error message that says - sudo: must be setuid root - whatever that means. I couldn't find that in any of the books I have.
I am trying to setup ipv6 lan network.using Ubuntu 10.04 as DNS server.Able to resolve domain names from dns server itself but can't resolve from client machine (backtrack5). I have tried to flush iptables but still no effect; dig gives servfail error.I can ping both machines from one another.
I installed SLES 11 SP1 jeOS on my system. It is booting up properly. But when I tried to boot it up with "TrustedGrub", it comes up up to login level. When I given the login name and password, it shows an error "Error in service module".Then i couldn't login.
Today, I finished assembling my dream computer. I can boot it into the BIOS, and I checked that everything was working correctly through there. Anyway, I attempted to transfer the hard drive from this computer to that one. This computer is a Dell (blech) Optiplex GX280 with an Intel processor and integrated graphics. The new one has an AMD Phenom II processor with an ATI card and an ASRock motherboard (drastically different machines, I know...) When I try to boot, GRUB gives me an error message that says something like:
Code: blah whatever cannot find /dev/disk/by-uuid/372de761-9577-48be-ba19-c6b2890cb229 Did I do something wrong installing the hard drive? Or is this a problem that is going to happen no matter how hard I try to make it not happen? If the second is true, will it help if I wipe the disk and reinstall Ubuntu on the new computer?
P.S. I know similar threads about transferring hard disks have been posted, but no thread has mentioned this error.
Wvdial give me this error PHP Code: --> WvDial: Internet dialer version 1.60--> Warning: section [Dialer Defaults] does not exist in wvdial.conf. --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory
I have a problem with the NTLM proxy we use in school. YAST proxy configuration won't work, it just says authentication error. We have to login with the user in DOMAINuser style and a password, in Firefox it works.
recently my HP Pavilion's Western Digital (WD2500JS) HDD has begun failing (bluescreens, slow, etc...). I was able to attach it to another computer using a IDE to USB adapter and save my personal files (pics, music, etc...), so the drive has not yet completely died. So I bought a SATA Seagate Barracuda 500GB HDD and wanted to use my restore discs that HP made me purchase off of them to reinstall my Windows Vista Home Premium Edition, which OF COURSE didn't work. So after researching a bit I found the best idea would be to make and Image copy of the original HDD and put it on the new one. So I tried using Clonezilla which ran in an endless loop giving error after error for hours while trying to image the disk. Fortunately my work has a ImageMASSter 4004i which is a piece of hardware that does a direct, drive to drive image from the Master drive to the destination drive.
But unfortunately this didn't work either. It was telling me that their was an error within the destination drive, something like "0x84 URMWT Sequencer failed to complete". Does the drive need to be completely empty?Should I reformat it before I try this (if so which FS?)? I plugged it into my laptop with USB to SATA adapter and was unable to mount it (this was after I had it in the Imaging Hardware Device, not sure if that could have screwed something up). The strange thing is that the last couple of days the new drive did work, I was using it for temporary storage of some files.
I had Skype debian_2.2.0.35-1_amd64 on my Debian 2.6.32-5 amd64 and it was working without any problem. After re-installing my gnome desktop environment, my skype stopped working. I tried to re-install it. I found out it re-installs without any error but it doesn't launch and gives me "segmentation fault" error on terminal. I purged skype, deleted the .skype folder and installed it again with no luck. when I try to re-install skype via software center it says: "Sorry, 'skype' is not available for this type of computer (amd64)." what should I do to have the skype working on my system again?
I am having a 1 gb of mysqldump. When i try to restore this dump file, it is giving error " ERROR 1153 (08S01) at line 289: Got a packet bigger than 'max_allowed_packet' bytes". And with this i am not able to restore the database. mysqld version is 5.0.77.