I have chosen to use automatic login. But every now and then I am asked for username and password when the computer boots. When I do get automatically login the screen resolution is changed to 800 x 600 instead of 1280 x 1024. How do I get those two (resolution and log in) settings sticky?
Graphics: Nvidia GeForce FX 5200 (updated today!)
SuSE Linux 11.2
KDE 4.3.5
I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
i installed virtual box one week ago.i downloaded a rpm package named virtualbox-4.0.4-1.2.3.i586.rpm and installed it via yast and i have some problems with it.my problem is i can't make a guest os in currect screen resolution and i can't connect any device(flash drives) in virtual box.
View 8 Replies View RelatedI have installed in squeeze following some directions the nvidia restricted driver from the unstable repos.
everything worked fine, except that the applied resolution is not kept after every restart or login
I'm got ubunt-desktop running VirtualBox. I installed MS XP HOME on a virtual disk. so everything *works* .. but I'd be a lot happier to have the box opened up all the way to my Ubuntu top-and-bottom bars.
View 6 Replies View RelatedMy monitor is an old, low-res (800x600 resolution) flatscreen, and the loader keeps trying to set it for 1024x768.the initial setup and package selection screens ran fine. it was only after rebooting to the "Welcome" screen that the problems started. I found the "resolution= (800x600 for me) under "additional boot options", but I don't know how to use it.
View 3 Replies View RelatedSituation is that there are two users on a Linux server- say A and B.A has been operating a shell script that in turn makes use of and exe file.The script and exe both are owned by user A.My problem is that I want user B to make use of the script and exe in exactly the same way user A does.So I have set suid bit of the script, exe and all the library files that the exe uses.But the exe is still not executing from user B.I did a man of chmod on Linux server and it gave an indication that SUID is disabled on new Linux servers.Now the question is, is there any other command that can perform the same task as SUID did on Unix.
View 4 Replies View RelatedI have a dual boot system with Windows 7 and Ubuntu 10.10. I want to make my grub menu look good and have set a beautiful background image to it and set the resolution so it fits the screen. Is it any way to resize the actual menu to make it smaller without shrinking the background picture?
View 1 Replies View RelatedI recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View Relatedafter managing to install ubuntu onto a Samsung n220 netbook, when I boot up im presented with just a black screen. I have tried to follow the sticky [URL] but I am slightly lost. I can press CTRL ALT F1 and get a login prompt - tty1. The commands from the sticky do not seem to work or do anything, and certain ones listed come back with a "Command not found" error.
View 1 Replies View Relatedinstallation opensuse 11.3 and kde 4.4 after update to kde 4.6, work fine, but problem is login screen is low like 640x350...? i wanted to change from lowtion to high 1024x768?when i start opensuse and begin to login was low resolution and log in my user and it's low resolutiona dn i change screen from setting system (kde) after change high display is works fine and rebbot same low resolution for LOGIN MANAGER how i can change it??
View 1 Replies View RelatedDoes anyone else have a resource monitor appearing on their KDE desktop? My is in the upper-right corner, and lies on top of all other windows. I can work with windows beneath it alright, but it is always showing.
The resource monitor is always translucent, and appears to have some sort of vertical "thermometer"-style usage scale on its left side. Beside that are two scrolling graphs. The only text/label appears to be a percentage that matches the thermometer bar, but there is nothing to tell me what resources are being monitored. Regardless, I use other resource monitoring software and I do not want this one on my desktop.
Running new installation of 11.3 with KDE Desktop. I have sorted out text appearance and size thanks to pwabrahams in another thread but I have a big problem with screen size/resolution.
In previous installation of 11.1 on the same machine I was able to change the resolution of the graphics in order to fit the windows on the screen more comfortably. I used to use something like 1240 x 1048 but in the System Settings > Computer Administration > Display the resolution is set at 832 x 624 and no higher resolutions are offered.
I cannot find out the details of the embedded graphics controller (10 year old Dell PE6300 server) but the system information report it as ATI Mach64 GI with swrast (No 3D acceleration) version 7.8.2. I have spent several hours reading the many pages on graphics in this forum and have concluded that I should probably be using a legacy driver but have no idea how to change the driver. Of course if it were possible to increase the resolution to 1240 X 1048 without recourse to changing driver that might do it if I knew what setting to tweak.
TO the sticky: My wireless doesn't work - a primer on what I should do next Section 2 b) I guess it would be easier for the user if she/he would just use one command instead of /sbin/lspci and than /sbin/lspci -n and compare both outputs to find the right section that inhales the hexadecimal numeric IDs for the wireless LAN/wireless/WLAN/bluetooth/..What do you (all and especially the sticky's author, dear Larry Finger) think of alternatives like:
Code:
/sbin/lspci -nn
e.g.->
Code:
[...]
[Code]...
Can't set screen resolution 1024x768 permanently. There is no tools like sax2 which is in openSUSE 11.2. I am to set screen resolution to 1024x768 every time after loggin in.
View 3 Replies View RelatedI just installed Suse 11.3 64bit on a new build. My video card is a nvidia gt240. I am using the default drivers. My monitor is a NEC 17" LCD.
When I boot up the screen resolution defaults to 1280x1024. I can go to applications>configure desktop>display and set it to 1024x768, which is my resolution of choice, and it works until I reboot or log out and log back in, then it resets to 1280x1024.
I would like to make 1024x768 the default so I don't have to keep changing it. Is there a way to do this? The output of xrandr looks like this:
$~> xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
DVI-I-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0 +
1152x864 75.0
1024x768 75.1 70.1* 60.0
[Code]...
Is there something I can change to set a new default resolution?
Every time I reboot, my screen resolution goes back to 800x600. Is there a way to permanently set it to what I want?
I'm running OpenSuSE 11.2 using KDE.
I am installing 11.2 on an older machine, Athlon 2800+, GeForce 6800, 1 GB RAM. Install goes fine until try to reboot to the OS and just get massive garbage on the screen. Can't see anything just lines crossing the screen, it seems almost like the resolution is way off but don't know how to change that since I can't see anything. I tried two different install disks to make sure not the problem and got the same thing with both. I tried installing both KDE and GNOME on separate occasions and still same problem. I have used the same install disk to put this on an even older machine and that went fine. I do have windows 7 installed on another partition. I'm fairly new to linux but I'm learning.
View 9 Replies View RelatedSuffering from the expected error in detecting my video properly when installed 11.3.Have intel 915G onboard video. Up until 11.1 Opensuse struggled with loading this correctly. in 11.1 & 11.2 all was well. A couple of minor tweaks in sax2 and it worked perfectly. Now hat sax2 has gone I'm not sure how to make these minor tweaks.
My problem is I have been forced to a screen resolution of 1024X768 VGA Following the readme file adding nomodeset at boot fixes the problem but of course forces me back to an old video driver with pretty poor performance. Is there any way I can change the screen resolution and set the correct monitor - any GUI replacement for sax2? Krandrtray will only let me set a max res of 1024x768. I need to set res to 1280x1024
Opensuse 11.3 with latest updates
KDE desktop
Whatever resolution I choose, 1600x1200 is preferred, it is reset to a default of 1024x768 when I log out. I use the "Configure Desktop" option to set the resolution. I can find no other method to do so. The graphics adapter is an ATI hd3200. I have installed the fglrx driver. I cannot fine the "Control Center" for the driver. How do I make the selected resolution permanent?
My openSuse 11.2 GNOME desktop is very quick and snappy.However, when I play Gnometris, the controls are very sticky and unresponsive!I have a high end nVidia card, and a dual core AMD 64 bit CPU, 2G Ram.
View 2 Replies View RelatedI run openSUSE 11.2 on my notebook using VirtualBox 3.0.6_OSE r52128. Recently, I installed the guest additions on my Windows XP guest system (VBoxGuestAdditions_3.0.6.iso).
Before this installation I was able to use a screen resolution of 1024x768 in the guest system. Having installed the guest additions the best result I get is 800x600.
The resolution I'd like to get is 1280x800 which is the default setting of the host system. The graphic device used in my system is an Intel 965 GME/GLE.
Whenever I restart my system, the screen resolution has been reset to 1600 x 1200. I change it in "configure desktop" and it's ok for the session but it changes back on reboot. Also, the font sizes are too small for xterms. Sure, I can ctrl+ to increase but why should I have to do this each time I login? I noticed others seem to be having this problem. Is there an upgrade that will fix this? I'm using 11.2 and kde.
View 9 Replies View RelatedI recently installed 11.2 and am now trying to increase the maximum screen resolution.When I go to 'confifure desktop' > 'display' it will not let me increase the maxiumum screen resolution past 800X600.My nVidia 6150 LE drivers/kernal are installed, so I'm not sure quite what to do.
View 7 Replies View RelatedI am new to this forum and would very much appreciate some assistance with a problem I am experiencing. I've just made the move from Windows Vista back to Linux after about a three year break from it and I am having trouble configuring the correct screen res for my wide screen monitor.
Some basic info:
System: openSUSE 11.2
KDE: 4.3.5 (KDE 4.3.5)
Monitor: Acer P191W 1400x900
Graphics Card: NVIDIA geforce 6100 nforce 430
Everything appears stretched, wider than it should be. At first I couldn't figure out how to change the screen res in Control Panel as it's missing the Monitor option to amend anything. After some reading on another thread I managed to access it as su , sax2. It detects the correct Monitor Model but does not offer 1400x900 as a res option. I also tried selecting LCD instead of a make and then selected 1440x900 as there is no 1400 option but this doesn't help things either.
I am a complete rookie so any help at all will be great. I thought it might perhaps be a driver issue as when windows are moved on the screen or if I scroll down a web page such as this it leaves 'artifacts'. Has anyone else experienced similar problems?
I upgraded my opensuse from 11.2 to 11.3, but after it, I have several problem with it.
Firstly: My graphic card is intel hd4500 and motherboard chip's is intel G41. After upgrading, I understood suse 11.3 didn't have sax2. at a result. I have problem with graphic card driver and consequently can't change screen resolution, therefore after each restart, my resolution automatically fix to 1600x1200 but I would like to set it in 1280x1024? What can I do to change it permanently?
Secondly: I installed vmware workstation 6.5 and after it, I see a message that say vmware need to Kernel Header 2.6.34-12- desktop. I install kernel-syms, kernel-source, gcc and make but doesn't run yet. What happen for it?
It's looking like from the options on the grub CL that the highest I can go is 1280x1020x32bit. But it still does not fit my entire screen (23'' LED) if there is a way to make runlevel 3 1920x1080, I have a Nvidia GTX460. Also, whether or not I can do it, how do I save the settings, so I don't have to type it in at the bottom of the screen in the boot menu? How do I drop back to runlevel 3, when I'm in the x system (GUI)?
View 4 Replies View RelatedI am trying to change the default screen resolution in Run Level 3 to 640x480. I have tried changing the menu.1st file and the vga=0x301 mode sticks until the system begins to boot and then resets to a higher resolution. This system does not have X, or Sax2 so no go on those options. This is OpenSuse 11.3 x64.
View 6 Replies View RelatedIs it possible to scale my screen to a bigger size? I have a huge TV as a monitor and at 1920x1080 on linux it is a bit of a strain for my eyes. on windows they have a feature to do this. You can make the text and other items, such as icons, on your screen easier to see by making them larger. You can do this without changing the screen resolution of your monitor or laptop screen. This allows you to increase or decrease the size of text and other items on your screen while keeping your monitor or laptop set to its optimal resolution
View 8 Replies View Related