OpenSUSE Install :: 11.3 - Screen Resolution Is Not Permanent
Jan 20, 2011
Opensuse 11.3 with latest updates
KDE desktop
Whatever resolution I choose, 1600x1200 is preferred, it is reset to a default of 1024x768 when I log out. I use the "Configure Desktop" option to set the resolution. I can find no other method to do so. The graphics adapter is an ATI hd3200. I have installed the fglrx driver. I cannot fine the "Control Center" for the driver. How do I make the selected resolution permanent?
I cannot get 1024x768 resolution permanently in my screen. When i go and adjust it in the kde personalize setting in the display menu everything seems to work. But after i reboot the system, the resolution again changes. Then i have to again configure it to 1024x768. Also i cannot find sax in openSUSE 11.3.
I recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
I am installing 11.2 on an older machine, Athlon 2800+, GeForce 6800, 1 GB RAM. Install goes fine until try to reboot to the OS and just get massive garbage on the screen. Can't see anything just lines crossing the screen, it seems almost like the resolution is way off but don't know how to change that since I can't see anything. I tried two different install disks to make sure not the problem and got the same thing with both. I tried installing both KDE and GNOME on separate occasions and still same problem. I have used the same install disk to put this on an even older machine and that went fine. I do have windows 7 installed on another partition. I'm fairly new to linux but I'm learning.
Suffering from the expected error in detecting my video properly when installed 11.3.Have intel 915G onboard video. Up until 11.1 Opensuse struggled with loading this correctly. in 11.1 & 11.2 all was well. A couple of minor tweaks in sax2 and it worked perfectly. Now hat sax2 has gone I'm not sure how to make these minor tweaks.
My problem is I have been forced to a screen resolution of 1024X768 VGA Following the readme file adding nomodeset at boot fixes the problem but of course forces me back to an old video driver with pretty poor performance. Is there any way I can change the screen resolution and set the correct monitor - any GUI replacement for sax2? Krandrtray will only let me set a max res of 1024x768. I need to set res to 1280x1024
installation opensuse 11.3 and kde 4.4 after update to kde 4.6, work fine, but problem is login screen is low like 640x350...? i wanted to change from lowtion to high 1024x768?when i start opensuse and begin to login was low resolution and log in my user and it's low resolutiona dn i change screen from setting system (kde) after change high display is works fine and rebbot same low resolution for LOGIN MANAGER how i can change it??
I am trying to change the default screen resolution in Run Level 3 to 640x480. I have tried changing the menu.1st file and the vga=0x301 mode sticks until the system begins to boot and then resets to a higher resolution. This system does not have X, or Sax2 so no go on those options. This is OpenSuse 11.3 x64.
Is it possible to scale my screen to a bigger size? I have a huge TV as a monitor and at 1920x1080 on linux it is a bit of a strain for my eyes. on windows they have a feature to do this. You can make the text and other items, such as icons, on your screen easier to see by making them larger. You can do this without changing the screen resolution of your monitor or laptop screen. This allows you to increase or decrease the size of text and other items on your screen while keeping your monitor or laptop set to its optimal resolution
I got my hands recently on openSUSE 10.2 (ppc) to put on my b&w powermac g3. i can boot from the cd and it gives me a text prompt and the choices install, rescue, and something to do with the network (which is whatever), and a not-very-helpful help option. so i type install, and my monitor says "input not supported." i figure, "ok, that's cool, i'll just plug in one of my old crt monitors 'cause it must be trying to use a resolution lower than my fancy-schmancy one supports." plug in the old one, restart, type "install," same thing. i'm not new to linux, but i don't really have any options with this prompt that any manner of googling or thread-hunting can uncover which allows me to specify the resolution at which the yast installer starts (or refresh rate, maybe that's it...) or lets me keep it in text mode through the installation. I tried typing "install textmode=1" which seems to do nothing special (same result as just "install") and just "textmode=1" (which is a fundamentally retarded approach, but what else am i supposed to do?). Once the operating system is installed and i can boot into a terminal, i figure can edit the xorg.config to use the resolution i want, but i can't very well install the system without seeing what i'm doing! It's just confusing 'cause it doesn't seem to like any display i give it.
Some month ago I installed openSUSE 11.1. It worked not bad, but I wanted to get the newes release of Firefox. So I did an upgrade to 11.2. Yast2 refused to work with an error message: unknown option -s (or similar). The regular updates didn't work also. Then I decided to do a new installation. Now I'm having a new problem: Display settings (Anzeige-Einstellungen) reports: Monitor unknown (Monitor unbekannt).
Possible resolution settings are: 800 x 600; 640 x 480; 400 x 300; 320 x 240; Possible refresh rates are: 60 Hz or 56 Hz @ 800 x 600 I need 1024 x 768 @ 76 Hz. In the previous installation it worked well. How I can teach openSUSE to run 1024 x 768 @ 76 Hz?
YAST2 Hardware information shows me in Monitor > Monitor > Resources > Resolution: High: 768; Vertical frequency: 76; Wide: 1024 The VGA controller is also correct shown in Display > 3d Blaster Savage 4
i changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
I tried out many distros on my desktop before experimenting with my oshiba Satellite A665 laptop with integrated intel graphics. Everything worked out as normal until I was testing Ubuntu on a live cd, I clicked install and it sent me back to the login screen before I had made an account. So I then chose to restart and it started glitching so I had to manually power off. Ever since then whichever distros I try to install, they face numerous errors. On Ubuntu and Peppermint they freeze on the 5 dots installation part and Linux Mint just has a permanent black screen. Even the current Peppermint OS (only distro i have)hangs on the 5 dots when trying to boot onto the computer. This has resulted me in a computer that cant do anything, i've tried the noquiet and nosplash options but they don't seem to work. I was thinking of installing Windows and maybe erasing the disk by installing another distro later?
I am trying to set up a permanent resolution in the xorg.conf file. At the moment whenever I reboot the machine the resolution defaults to auto. How I can change that to be constantly at 1600x1200?
Here is my xorg.conf file. Code: # nvidia-xconfig: version 1.0 (buildmeister@builder62) Wed May 27 01:58:49 PDT 2009 Section "ServerLayout" Identifier "Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "stylus" "SendCoreEvents" # Added InputDevice "eraser" "SendCoreEvents" # Added InputDevice "cursor" "SendCoreEvents" # Added InputDevice "pad" "SendCoreEvents" EndSection .....
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
Running new installation of 11.3 with KDE Desktop. I have sorted out text appearance and size thanks to pwabrahams in another thread but I have a big problem with screen size/resolution.
In previous installation of 11.1 on the same machine I was able to change the resolution of the graphics in order to fit the windows on the screen more comfortably. I used to use something like 1240 x 1048 but in the System Settings > Computer Administration > Display the resolution is set at 832 x 624 and no higher resolutions are offered.
I cannot find out the details of the embedded graphics controller (10 year old Dell PE6300 server) but the system information report it as ATI Mach64 GI with swrast (No 3D acceleration) version 7.8.2. I have spent several hours reading the many pages on graphics in this forum and have concluded that I should probably be using a legacy driver but have no idea how to change the driver. Of course if it were possible to increase the resolution to 1240 X 1048 without recourse to changing driver that might do it if I knew what setting to tweak.
I have chosen to use automatic login. But every now and then I am asked for username and password when the computer boots. When I do get automatically login the screen resolution is changed to 800 x 600 instead of 1280 x 1024. How do I get those two (resolution and log in) settings sticky?
Graphics: Nvidia GeForce FX 5200 (updated today!) SuSE Linux 11.2 KDE 4.3.5
Can't set screen resolution 1024x768 permanently. There is no tools like sax2 which is in openSUSE 11.2. I am to set screen resolution to 1024x768 every time after loggin in.
I just installed Suse 11.3 64bit on a new build. My video card is a nvidia gt240. I am using the default drivers. My monitor is a NEC 17" LCD.
When I boot up the screen resolution defaults to 1280x1024. I can go to applications>configure desktop>display and set it to 1024x768, which is my resolution of choice, and it works until I reboot or log out and log back in, then it resets to 1280x1024.
I would like to make 1024x768 the default so I don't have to keep changing it. Is there a way to do this? The output of xrandr looks like this:
$~> xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192 DVI-I-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0 + 1152x864 75.0 1024x768 75.1 70.1* 60.0
[Code]...
Is there something I can change to set a new default resolution?
Our Fedora 15 linux box have the following requirements:
1. Runlevel 3 1. Autologin as root for convenience 2. Run Xorg 3. Run xterm on display :0.0 4. Lauch our program on display :0.0
So we simply put step 2 ~ step 4 in the .bash_profile of root user:
# .bash_profile if [ -f "/.bahsrc ]; then .~/.bashrc fi export DISPLAY=:0.0 Xorg & sleep 3 # for some reason, we need this three seconds to make sure that xterm start up successfully xterm &
The problem is, if I issue "kill xterm", it flashes out some messages disappearing so quick that I can't even read, and then leave me with a black screen with a cross cursor at the center. The system seems to be crashed, even the numlock doesn't work. Since we execute xterm & during logging in, now I can crash my system simply by pressing ctrl + C ! That's disaster!
I run openSUSE 11.2 on my notebook using VirtualBox 3.0.6_OSE r52128. Recently, I installed the guest additions on my Windows XP guest system (VBoxGuestAdditions_3.0.6.iso). Before this installation I was able to use a screen resolution of 1024x768 in the guest system. Having installed the guest additions the best result I get is 800x600. The resolution I'd like to get is 1280x800 which is the default setting of the host system. The graphic device used in my system is an Intel 965 GME/GLE.
Whenever I restart my system, the screen resolution has been reset to 1600 x 1200. I change it in "configure desktop" and it's ok for the session but it changes back on reboot. Also, the font sizes are too small for xterms. Sure, I can ctrl+ to increase but why should I have to do this each time I login? I noticed others seem to be having this problem. Is there an upgrade that will fix this? I'm using 11.2 and kde.
i installed virtual box one week ago.i downloaded a rpm package named virtualbox-4.0.4-1.2.3.i586.rpm and installed it via yast and i have some problems with it.my problem is i can't make a guest os in currect screen resolution and i can't connect any device(flash drives) in virtual box.
I recently installed 11.2 and am now trying to increase the maximum screen resolution.When I go to 'confifure desktop' > 'display' it will not let me increase the maxiumum screen resolution past 800X600.My nVidia 6150 LE drivers/kernal are installed, so I'm not sure quite what to do.
I am new to this forum and would very much appreciate some assistance with a problem I am experiencing. I've just made the move from Windows Vista back to Linux after about a three year break from it and I am having trouble configuring the correct screen res for my wide screen monitor.
Everything appears stretched, wider than it should be. At first I couldn't figure out how to change the screen res in Control Panel as it's missing the Monitor option to amend anything. After some reading on another thread I managed to access it as su , sax2. It detects the correct Monitor Model but does not offer 1400x900 as a res option. I also tried selecting LCD instead of a make and then selected 1440x900 as there is no 1400 option but this doesn't help things either.
I am a complete rookie so any help at all will be great. I thought it might perhaps be a driver issue as when windows are moved on the screen or if I scroll down a web page such as this it leaves 'artifacts'. Has anyone else experienced similar problems?
I upgraded my opensuse from 11.2 to 11.3, but after it, I have several problem with it.
Firstly: My graphic card is intel hd4500 and motherboard chip's is intel G41. After upgrading, I understood suse 11.3 didn't have sax2. at a result. I have problem with graphic card driver and consequently can't change screen resolution, therefore after each restart, my resolution automatically fix to 1600x1200 but I would like to set it in 1280x1024? What can I do to change it permanently?
Secondly: I installed vmware workstation 6.5 and after it, I see a message that say vmware need to Kernel Header 2.6.34-12- desktop. I install kernel-syms, kernel-source, gcc and make but doesn't run yet. What happen for it?
It's looking like from the options on the grub CL that the highest I can go is 1280x1020x32bit. But it still does not fit my entire screen (23'' LED) if there is a way to make runlevel 3 1920x1080, I have a Nvidia GTX460. Also, whether or not I can do it, how do I save the settings, so I don't have to type it in at the bottom of the screen in the boot menu? How do I drop back to runlevel 3, when I'm in the x system (GUI)?
I'm a newbe to Debian & Linux but I am trying to get a base system installed on a small touchscreen computer without the Gnome environment. I am using Debian 5 but the resolution of the screen has not configured correctly with the command line screen appearing offset to the right.
When originally installing my resolution was a perfect 1440x900.
I then installed the Nvidia drivers with:
YUM install kmod-nvidia
This worked fine, I tried out Super Tux 2 to test it and I do indeed have 3D acceleration now. The only problem is my resolution has gone way down. The Nvidia software states its still 1440x900 but it definitely is not... And my monitor is down as (Not in front of it right now so can�t remember exactly) Generic or not detected... Is that what's causing the issue?
So to summarize, I have 3D hardware acceleration, the appropriate Nvidia drivers, it's just my resolution and the fact the Nvidia software is lying about it...
