OpenSUSE Wireless :: Sticky: Numeric IDs In One Step?

Apr 5, 2011

TO the sticky: My wireless doesn't work - a primer on what I should do next Section 2 b) I guess it would be easier for the user if she/he would just use one command instead of /sbin/lspci and than /sbin/lspci -n and compare both outputs to find the right section that inhales the hexadecimal numeric IDs for the wireless LAN/wireless/WLAN/bluetooth/..What do you (all and especially the sticky's author, dear Larry Finger) think of alternatives like:

Code:
/sbin/lspci -nn
e.g.->
Code:
[...]

[Code]...

View 8 Replies


ADVERTISEMENT

OpenSUSE Wireless :: Followed Sticky Post On Wireless Not Working Till Got Confused?

May 24, 2011

i read the sticky post on here about how to try and get my wireless card working.

i have installed opensuse 11.4
i followed step 1 of post and got following: /usr/bin/lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[code]...

View 9 Replies View Related

OpenSUSE Wireless :: Getting Wireless To Work, Stuck On Step 5?

Feb 15, 2010

been beating my head against the wall.

hope@linux-vp98:~> sudo /usr/sbin/iwlist scan
root's password:
lo Interface doesn't support scanning.

[code]....

View 9 Replies View Related

OpenSUSE Wireless :: No Wireless In 11.2 - Troubleshooting Failure At "ifconfig" Test Step?

Mar 6, 2010

I've gone through the trouble-shooting procedure discussed in the "lwfinger" stickies. My results are shown below. Output of all test steps looks fine until I run "ifconfig" - no valid IP address is reported. My access point works fine with other devices (including an existing 11.1 install).My detailed trouble-shooting output is shown below.

TROUBLE-SHOOTING SUMMARY
- wpa_supplicant software is installed
- network controller data are identified by "lspci" commands (no switch, -v, -n), including:

[code]...

View 9 Replies View Related

General :: Sticky Situation Bcos Of Sticky Bit

Feb 21, 2011

Situation is that there are two users on a Linux server- say A and B.A has been operating a shell script that in turn makes use of and exe file.The script and exe both are owned by user A.My problem is that I want user B to make use of the script and exe in exactly the same way user A does.So I have set suid bit of the script, exe and all the library files that the exe uses.But the exe is still not executing from user B.I did a man of chmod on Linux server and it gave an indication that SUID is disabled on new Linux servers.Now the question is, is there any other command that can perform the same task as SUID did on Unix.

View 4 Replies View Related

Ubuntu Installation :: Step By Step Procedure About Installing Free Adobe Flex SDK?

Feb 13, 2011

step by step procedure of how to install Free Adobe Flex SDK in Ubuntu 10.04.

View 1 Replies View Related

Fedora Networking :: Couldn't Find Any Step-by-step Installation Guides For NM

Jan 23, 2010

My son's desktop has Fedora 12 and a wireless card. Everything worked for a long time until one fine day the network management just disappeared from both System/Preferences menu and the panel on top.I can run a Live CD with Fedora 12 on that machine and it immediately connects to our home wireless network. Booting from hard drive has no sign of NM. Trying to run 'yum install NetworkManager-gnome' does nothing because there is no connection. Running the same command as a LiveUser from CD does seem to install everything (but where to???), no errors reported, and still the is no network functionality upon reboot from the hard drive, even when plugging to LAN with a cable.It seems that I need NetworkManager in order to go online in order to install NetworkManager.I have other computers at home that work fine, I was able to download a couple of archives with NM, but I am new to Linux and have no idea what to do with those files.I could not find any step-by-step installation guides for NM, especially when the computer has no connection at all.

View 8 Replies View Related

Fedora Networking :: Step By Step Guide To Folder Sharing Inside LAN

Jun 26, 2011

Recent refugee from Ubuntu here. Fedora fan for one month.I have two computers that access the Internet through a router. They are assigned IPs dynamically by the router's DHCP. I need each computer to be able to "see" some shared folder on the other one, with RW permissions to that folder and its content.I want to use Nautilus to access those folders from each computer.

Tried NFS, Samba, gnome-user-share to no avail.

Willing to kill Fedora's firewall forever in order to ease folder sharing.Can some kind and knowledgeable person try a step by step setup guide for this? As an 8-year Linux user I am not afraid of command line interfaces.

View 9 Replies View Related

Ubuntu :: Step-by-step Installation Including Registering Environment Variable?

Jul 18, 2010

I'm an absolute beginner trying to sue Linux. I just installed Ubuntu Linux Netbook Remix 10.04 LTS and everything's fine. I just wanted to have Java in my Ubuntu. I downloaded JDK from Sun website. There are 2 files

jdk-6u21-linux-i586.bin
jdk-6u21-linux-i586-rpm.bin

I searched the web for instructions on how to install but I just get confused. Can anyone provide me with step-by-step installation including registering environment variable ?

View 1 Replies View Related

General :: Step To Step Approach To Platform Called Mean A Self Explanatory Article

Jun 6, 2011

i would want someone who would like to assist me as i start to use linux because i am naive to this platform. Also want a step to step approach to this platform called linux i mean a self explanatory article or tutorial

View 8 Replies View Related

Networking :: Document - Website For Creating MRTG With CentOS 5.5 Step By Step?

Apr 4, 2011

Are there any document or website for creating MRTG with CentOS 5.5 step by step?

View 1 Replies View Related

General :: Step By Step To Reinstall Vsftpd On Ubuntu 10.0.4 (32bit)

May 21, 2011

i installed rtorrent using the script in the rtorrent forum it installed webmin and vsftpd.vsftpd shows connection refused tried everything open port 990 in iptable disable selinux but not working someone tell me step by step to reinstall vsftpd on ubuntu 10.0.4 (32bit)

View 1 Replies View Related

Server :: Step By Step Procedure For Adding A PLUGIN In Cacti?

Sep 7, 2010

mention an example step by step procedure for adding a PLUGIN in Cacti. And also mention what does a PLUGIN serve in Cacti ? I am a newbie to cacti please consider my silly questions.

View 1 Replies View Related

Ubuntu Networking :: Cannot Find One Comprehensive Step-by-step?

Sep 4, 2010

I have read a bajillion tutorials and have gotten nowhere. This is my first Linux box, and it has been nothing but headaches. i'm pretty handy around computers, I took a Unix class, and I used Dos as a kid, but i'm just having so much trouble with this.I just want to remotely control my Ubuntu box from my windows laptop over my home network. That's it. I cannot find one comprehensive step-by-step tutorial that will show me how to do this. Everything I find assumes I know at least something about linux, and I don't.

I have Putty, realvnc and tightvnc viewer installed on my laptop.I have open-ssh and vx11 somethingorotherinstalled on the Ubuntu box. I have also allowed remote connections on Ubuntu from system>preferences. I am getting very frustrated and would really appreciate someone giving me some help. So far I HAVE been able to remotely control the box through one method. Through the GUI on ubuntu I went to: System>Preferences>network connections

and set the server to static IP, then I was able to use real VNC viewer from my windows machine to connect to the IP I set (192.168.0.11) but I couldn't get there through servername.local or whatever it said. The problem witht his solution is that the Ubuntu box then couldn't connect to the internet (which I need it to do.) someone please please please direct me to the information I need for this simple task. I just need to remotely control the desktop, the reason I wanted to use vnc through ssh so that I can leave the ubuntu box headless. Using just VNC I was having problems when the box was rebooted (had to log in before I could remotely control it... something about a security key ring?)

View 7 Replies View Related

Ubuntu :: Step By Step Process Of Installing Octave?

Feb 18, 2011

can anyone explain me step by step process of installing octave on ubuntu 10.04?

View 1 Replies View Related

Red Hat / Fedora :: Step By Step For Setting Up Virtualization In Rhel?

Jun 28, 2010

For a testing purpose iin our environment we need to setup a Linux based virtual machines.For that i come to know there is a option in RHEL using xen or kvm.can anyone provide me the detailed step by step for setting up virtualization in rhel?Also i have few doubts like, is redhat subscription needed for achieve this?also there is a possible to do vmotion thing which is in vmware,can we do that with rhel virtualization without rhel subscription.

View 8 Replies View Related

General :: Configure An Apache Server Step By Step?

Feb 7, 2010

i am using rhel5. can anybody tell how to configure an apache server step by step

View 1 Replies View Related

Server :: Step By Step Configuration For Enabling SNMP

Sep 29, 2010

I am using redhat linux enterprises edition 5. Please some help to enable SNMP on linux box.Please tell me step by step configuration for enabling SNMP.

View 3 Replies View Related

Software :: Step By Step Document For DNS & Sendmail Configuration?

Mar 15, 2010

step by step document for DNS & Sendmail configuration

View 2 Replies View Related

OpenSUSE :: Sticky Resource Monitor In KDE?

Aug 7, 2010

Does anyone else have a resource monitor appearing on their KDE desktop? My is in the upper-right corner, and lies on top of all other windows. I can work with windows beneath it alright, but it is always showing.

The resource monitor is always translucent, and appears to have some sort of vertical "thermometer"-style usage scale on its left side. Beside that are two scrolling graphs. The only text/label appears to be a percentage that matches the thermometer bar, but there is nothing to tell me what resources are being monitored. Regardless, I use other resource monitoring software and I do not want this one on my desktop.

View 8 Replies View Related

OpenSUSE :: How To Make Screen Resolution Sticky

Mar 6, 2010

I have chosen to use automatic login. But every now and then I am asked for username and password when the computer boots. When I do get automatically login the screen resolution is changed to 800 x 600 instead of 1280 x 1024. How do I get those two (resolution and log in) settings sticky?

Graphics: Nvidia GeForce FX 5200 (updated today!)
SuSE Linux 11.2
KDE 4.3.5

View 3 Replies View Related

Fedora :: Step By Step For Setting Up Multiseat Of F14?

Nov 22, 2010

Currently, I am setting up multi seat system with Fedora 14 but after hours of searching, i'm still running into some issues. I have managed to edit and get the xorg.conf file working although im still having problems.

I want to set up the multi seat so that 1 server with 2 graphics hards connects to two monitors and have their own sessions. I have got the xsessions working although you can move the mouse across 1 screen to the other. Is there any resources as to step by step for setting up multiseat of fedora 14? Are there any main issues regarding custom.conf?

View 2 Replies View Related

Ubuntu :: Step By Step Instuctions For Thttpd?

Dec 18, 2010

I am trying to setup thttpd on my ubuntu 10.04 system. I run ubuntu in a vm and would like to be able to turn on and off a simple web server as I please. I have been having lots of trouble trying to find a guide on how to setup and run thttpd. I have looked at the author of thttpd's homepage as well as this guide, and yet I cannot get it to work. Basically I have it installed and don't know how to start or configure it so that it starts. Current code

Code:
user@ubuntu:~$ sudo apt-get install thttpd
[sudo] password for user:
Reading package lists... Done
Building dependency tree

[Code]...

View 1 Replies View Related

General :: How To Make A Desktop Step By Step

Mar 23, 2011

Now I am using fedora14 for a long time. I want to know how to make a Linux desktop. I just want to download a linux kernel source, then compile it, then add softwares step by step, Last I want to get a desktop linux with X11.

View 5 Replies View Related

General :: Step By Step Way To Install Driver?

Jul 13, 2010

i had problem on installing my nvidia gforce 8600m gt driver on fc12,now i have installed fc13,could any one show me a step by step way to install the driver?i don't want to confront with that black screen one more time,as i understand if we download the driver from the nvidia website there would be a relationship between the kernel version and the driver,if so what is it?how should we understand which driver is for which kernel?my kernel is,2.6.33.3-85.fc13.i686.PAE[with 2 gb ram]which way is better?to get driver via repos and yum or the nvidia website?

View 6 Replies View Related

Server :: Configure Dsn In Redhat 5.4 Step By Step?

Jan 27, 2010

how to configure dsn server in redhat linux 5.4 step by step

View 1 Replies View Related

OpenSUSE :: When Play Gnometris / Controls Are Very Sticky And Unresponsive

Mar 2, 2010

My openSuse 11.2 GNOME desktop is very quick and snappy.However, when I play Gnometris, the controls are very sticky and unresponsive!I have a high end nVidia card, and a dual core AMD 64 bit CPU, 2G Ram.

View 2 Replies View Related

OpenSUSE :: GCC C++ Compiler Installation - Repositories In The Application Sticky Only Applied To Installations Through 11.3

Apr 18, 2011

I am looking to install a c++ compiler. I run 11.4, and was told to look in the Software Manager for easy installation. I have no repositories installed, as the repositories in the Application sticky only applied to Suse installations through 11.3. I found the package "gcc45-c++" (Version Number 4.5.1_20...208-9.8) when I searched the Software Manager. I proceeded to install it, and had no problems, but when I looked in "applications", the compiler was not there. I'm aware that I may be revealing some great ignorance here, so I'll ask, should gcc appear? If not, how do I execute the program?

View 9 Replies View Related

OpenSUSE :: Numeric/arrayobject.h:No Such File Or Directory

Feb 7, 2010

Opensuse 11.2 x86-64
python-numpy 1.3.0-22.1
python-numpy-devel 1.3.0-22.1

The Numerical Python (numpy) is installed.

Numeric/arrayobject.h:No such file or directory

View 3 Replies View Related

General :: Install Dns Step By Step

Jul 15, 2010

how to install dns step by step

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved