OpenSUSE Hardware :: Installation Of SUSE 11.2 On A New SCSI Hard Drive?
Jan 22, 2010
I did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted.
I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive. However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message im given means I think it could be trying to fchk it.Do I need to do something more like remove /dev/sdd ?
View 3 Replies
ADVERTISEMENT
Feb 26, 2010
I came in this morning only to find that the Intel Core2 hyperthreading Dell machine is dead. It appears the processor is fried.
I have a new white-box X2 system that I will replace the dead Dell with. The X2 (AMD) does not have a hard-drive (HDD) so, I will simply put the SATA hard-drive into the PC.
Some of you may know how to do this, but I don't know where to begin after I get the Hard-drive in. (I know how to move a Windows configuration from one PC to another and handle it as it begins to blue screen (BSOD), but I don't have a clue with Linux)
This system was built with GRUB. At the very least, I expect the GRUB boot managet to surface on the display. But, what next....
I was testing an OpenSuse setup as a server. Nothing fancy and NO applications added. The only customization was the MB's LAN card and the display was set at 1024x768. I had 2 users, root and myself. What would you do? Is there some boot time options that I should follow?
View 9 Replies
View Related
Feb 6, 2010
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
View 9 Replies
View Related
Jan 25, 2010
After connecting, dmesg shows:
Code:
After that, there are no /dev/sd* entries. the hard drive works as expected on my windows box. how can i mount this drive?
View 7 Replies
View Related
Jun 15, 2011
I have a 1TB segate hard drive. I want to partition that hard drive for open suse for installation. What would you consider to be the best size method for partitioning?SwapPrimaryHomeRoot
View 1 Replies
View Related
Jun 15, 2011
I have a 1TB segate hard drive. I want to partition that hard drive for open suse for installation. What would you consider to be the best size method for partitioning?
View 4 Replies
View Related
Mar 15, 2011
I installed OpenSuse 11.4 (x86_64) a couple of days ago.One of my Drives a PC-DVD RAM (Creative) is not working. This worked under 11.3.The SCSI drive is connected to a PCI/SCSI adapter (AHA-2904).The message I see at boot is:ata_id[443]HDIO_GET_IDENTITY FAILED /dev/sr1I also see the message ata_piix not found, and can not find an option in the kernel
to provide this.This causes the system to wait a long time and slows down boot dramatically
View 2 Replies
View Related
Feb 17, 2009
I multiboot with Suse Linux 9.2 with kernel 2.6.8 & Windows XP on my hard drive. I want to know how can I remove grub boot loader from the MBR of my hard drive safely to keep Windows XP running with no problems?
View 2 Replies
View Related
Jan 23, 2010
My new motherboard came with two on-board harddrive raid controllers,for a possible total of 10 sata drives. Now that 1-terabyte drives are getting down to near $100, I never need to run out of space again.Except: last night I read that Suse Linux has 4 terabyte hard drive limit.Is that true? Is the limit per computer, per drive, or per controller?
View 3 Replies
View Related
Jul 9, 2010
My macbook pro stopped booting yesterday due to some file system corruption in the hard drive. I am able to access this drive through a linux live cd which I am using now but when I go to some folders it says "Could not enter folder /media/Macintosh HD/..." My question is how do I give myself the permissions to be able to access these files and transfer them to a network drive?
View 1 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Jul 9, 2010
My mac osx hard drive does not boot anymore and I would like to get my important files off before I reformat the hard drive. I have run into a bit of an obstacle -- there seems to be some permissions setting that are barring me from accessing the files I need to. I can see the Machintosh HD and can access some files. How do I change permissions for the entire drive and all it's directories?
View 13 Replies
View Related
Aug 17, 2010
I have a 250 gig usb hard drive, my bios allows me to boot from it. What I would like to do is install the above 2 o/s so I can dual boot from either one.
View 1 Replies
View Related
Feb 9, 2010
I downloaded x86-64 hybrid DVD and done everything according to instructions from Installation without CD - openSUSE.After booting from USB HDD, the first page took about 3 minutes to switch menu to the installation media option then afterwards the installation got stuck on Hard drive detection (probably 2 hours before i rebooted into windows 7). Installation scenario is:
Machine: Compaq presario C767TU
HDD: 320 GB with Windows 7 Ultimate on root partition, all other partitions NTFS
Free Space for Linux: 30 GB (Extended partition) currently having Mandriva 2010 with /swap 2GB, / 10GB,
[code]...
View 9 Replies
View Related
Aug 10, 2010
I dont want to wipe the whole drive, and i don't want to delete only particular files. I want to completely destroy all data in free space.I've found some articles about secure-delete package for linux that would allow erasing freespace with the command 'sfill,' but I can't find it in the repositories nor through google. This would be ideal but it seems maybe it's debian only.
View 2 Replies
View Related
Jun 26, 2010
The hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
View 1 Replies
View Related
Feb 4, 2010
Everything went wrong no sound, no scsi to scanner, printers, and kde only using failsafe. So, did a new install and still probskde stops half way through saying it there is no file in /lib/modules/2.6.31-5-0.1-desktop
Fixed prob by creating a copy of 2.6.31-8.0-desktop
kde only starts with x11failsafe
On failsafe boot (from GRUB) load of messages daying can not find disks then mess Doing Fastboot
At least I've got sound though printer still a prob
Any ideas how to fix the kde start up?
config
ASUS M4A78-E, AMD xenon III 550, 4GB mem
SUSE 11.2 standard KDE, network install
View 4 Replies
View Related
Jul 21, 2009
I made an image of a server(A). It did not work because It did not see /dev/sda. So I used another cd from indentical sever(B), cd which had work. Then mounted the nfs copy the image over. Server(B) had slightly older version of sles. And its not using lvm. But point is it had appropriate driver in the image cd.
Now situation is, This new image copied ever thing over.(I can mount it using LIVE CD). But When I boot up server it wont see vg volume group. I believe scsi driver is missing.After booting from LIVE CD I chroot in root used yast to add initrd modules, qla2xxx, mptbase, mptscsih(other server(B) had those). Still when I reboot it, it get stuck saying
Code:
No volume groups found
unable to find volume group
waitnit fot device /dev/vg1/root
to appear .... not found device nodes:
.....
......
.....
No root device found. exiting to /bin/sh
sh: cant access tty; job control turned off
View 1 Replies
View Related
Feb 17, 2015
Installing two scsi hard disks on a debian system.
It is a physical old HP machine (netserver lc2000) with a fresh debian wheezy 7.0.8 installed.
It has two scsi hdds (73GBs) that I don't know how to add to the system so I can partition, format, mount, etc.
This is what I have tried so far:
1. dmesg output
Code: Select all# dmesg | grep scsi
[ 2.173909] scsi0 : pata_serverworks
[ 2.174377] scsi1 : pata_serverworks
[ 2.417276] scsi 0:0:0:0: CD-ROM LITEON CD-ROM LTN485S JKF1 PQ: 0 ANSI: 5
[ 2.622195] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.623194] sr 0:0:0:0: Attached scsi CD-ROM sr0
[Code] ....
2. lsscsi output
-I installed lsscsi and here is the output:
Code: Select all# lsscsi --device
[0:0:0:0] cd/dvd LITEON CD-ROM LTN485S JKF1 /dev/sr0
[2:0:0:0] disk HP Net Mirror V1.0 /dev/sda
[2:2:0:0] disk HP 9.10GB C 80-P94N P94N -
[2:2:1:0] disk HP 9.10GB C 80-P94N P94N -
[Code] ....
3. force scsi scan
-I tried to use this command to force a rescan for the hdds, but nothing happened:
Code: Select allecho "- - -" > /sys/class/scsi_host/host3/scan
-no errors, but log says nothing
-tried the above with host0 - 4, same result
4. fdisk -l
Code: Select all# fdisk -l
Disk /dev/sda: 9098 MB, 9098887168 bytes
255 heads, 63 sectors/track, 1106 cylinders, total 17771264 sectors
Units = sectors of 1 * 512 = 512 bytes
[Code] ....
5. tried to specifically add one device but it didn't work:
Code: Select all# echo "scsi add-single-device 2 2 8 0" > /proc/scsi/scsi
-bash: /proc/scsi/scsi: No such file or directory
View 2 Replies
View Related
Mar 26, 2010
I am developing for a Linux based device for which the HOT PLUG option is deactivated. As part of optimizing the code, we also don't want to create device files for unused devices. We understand that both USB attached and fixec SCSI hard disks would create device files like /dev/sda,/dev/sda1 /dev/sdb, /dev/sdb1 etc. Is this understanding correct?
In the case of USB attached SCSI devices, would driver create this device file entry? How is it created? Can somebody please tell me how it is being created automatically. In case I attach a fixed SCSI hard disk before boot up(and create device file /dev/sda1), would USB SCSI device driver create device files starting from /dev/sdb, automatically.
View 4 Replies
View Related
Jan 19, 2011
I am running the latest suse release downloaded directly from their website. I ran the installation after buring the dvd and everything seemed to be working fine. after the installation i ran updates and used it for a little bit. When i shut it down that night and went to restart it I got an error that stated the OS wasnt there. I then went through the installation and everything and it retained the information from the installation before (web history etc.) but for some reason every time I reboot or shut it down the system is not able to read the startup information from the hard drive and will not come on without me re installing it.
View 9 Replies
View Related
Aug 5, 2009
the hard disc has two partitions, one is 156gb ntfs, currently with windows xp prof sp2, and I am trying to install linux to the second partition, also currently ntfs.I am not a total newbie (i used fedora 10 last semester and ubuntu the semester before that). I have tried installing ubuntu9.04, fedora 10, fedora 11, and opensuse11.1 to this computer, and every time the installation probes for hard disks it comes up with zip, unless I have my external disks connected. Otherwise "No hard disks were found for the installation. Please check your hardware!"with OK button.
I also tried with gparted to see if I could find the hard disk, and still had no luck. I googled my problem and found others with similar problem but no satisfactory solution.does anybody have any idea what could be wrong and how to fix it??
View 6 Replies
View Related
Jan 23, 2010
I wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Feb 15, 2010
i m facing same error in most of the HCL servers. the problem is that it throws error while booting and sometimes not throws error. the error is :-
Feb 13 13:17:25 fe13s kernel: Adapter 0: Bus A: The SCSI controller was reset due to SCSI BUS noise or an invalid signal. Check cables, termination, termpower, LVDS operation, etc.
Feb 13 13:17:30 fe13s kernel: Adapter 0: Bus B: The SCSI controller successfully recovered from a SCSI BUS issue. The issue may still be present on the BUS. Check cables, termination, termpower, LVDS operation, etc
Feb 13 13:29:15 fe13s kernel: Adapter 0: Bus B: The SCSI controller successfully recovered from a SCSI BUS issue. The issue may still be present on the BUS. Check cables, termination, termpower, LVDS operation, etc
code....
View 2 Replies
View Related
Apr 11, 2011
In my understanding, the way /proc/scsi/scsi gets populated, /proc/paritions also gets populated in the same fashion. i.e. the description for first entry of /proc/scsi/scsi can be seen in the first entry of /proc/partitions and same for rest.
So, With this assumption, in my project, I used to relate first entry of /proc/scsi/scsi with first entry of /proc/partitions to get its total size and same for all entries.
But, I observed some differences in following scenario, where
1) The first 4 entries in /proc/scsi/scsi are SAN luns attached to my system and for which the actual device names in /dev/ are sda,sdb,sdc and sdd.
2) The last 4 entries are the internal HDDs on same system. In /dev/, their respective device names are sde,sdf,sdg & sdh.
(Output attached at end of the thread)
But in /proc/partitions, the device order is different.
You can see their respective sizes in /proc/partition output as well.
So, my question is, in this particular scenario, I can't relate the first entry of /proc/scsi/scsi with first entry of /proc/partition. i.e. scsi0:00:00:00 is not /dev/sde, because it is actually /dev/sda.
It seems that my assumption is wrong in this scenario.
Is there any way or mechanism to figure out actual device name for an entry in /proc/scsi/scsi in /dev/ directory?
How can my application should relate /proc/scsi/scsi entries with their respective device names and sizes?
View 2 Replies
View Related
May 4, 2010
When I enter "cat /proc/scsi/scsi" I'm returned with "cat: /proc/scsi/scsi: No such file or directory". I've tried this on two different installs on two different machines.
View 6 Replies
View Related
May 29, 2010
I try to use a usb pen drive. The usb pen drive show up under computer but not like a drive in geparted. When I look in the log file I find the drive
Code:
May 29 10:11:46 CQ60 kernel: [ 112.942602] scsi 6:0:0:0: Direct-Access
USBest USB2FlashStorage 0.00 PQ: 0 ANSI: 2
I do not know what this mean but it looks like the drive show up like a scsi and not usb or? I need a clue to get it work like a normal usb device.
View 4 Replies
View Related
