OpenSUSE Hardware :: Scsi DVD RAM Not Working On SuSE 11.4?
Mar 15, 2011
I installed OpenSuse 11.4 (x86_64) a couple of days ago.One of my Drives a PC-DVD RAM (Creative) is not working. This worked under 11.3.The SCSI drive is connected to a PCI/SCSI adapter (AHA-2904).The message I see at boot is:ata_id[443]HDIO_GET_IDENTITY FAILED /dev/sr1I also see the message ata_piix not found, and can not find an option in the kernel
to provide this.This causes the system to wait a long time and slows down boot dramatically
View 2 Replies
ADVERTISEMENT
Jan 22, 2010
I did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted.
I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive. However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message im given means I think it could be trying to fchk it.Do I need to do something more like remove /dev/sdd ?
View 3 Replies
View Related
Feb 4, 2010
Everything went wrong no sound, no scsi to scanner, printers, and kde only using failsafe. So, did a new install and still probskde stops half way through saying it there is no file in /lib/modules/2.6.31-5-0.1-desktop
Fixed prob by creating a copy of 2.6.31-8.0-desktop
kde only starts with x11failsafe
On failsafe boot (from GRUB) load of messages daying can not find disks then mess Doing Fastboot
At least I've got sound though printer still a prob
Any ideas how to fix the kde start up?
config
ASUS M4A78-E, AMD xenon III 550, 4GB mem
SUSE 11.2 standard KDE, network install
View 4 Replies
View Related
Jul 21, 2009
I made an image of a server(A). It did not work because It did not see /dev/sda. So I used another cd from indentical sever(B), cd which had work. Then mounted the nfs copy the image over. Server(B) had slightly older version of sles. And its not using lvm. But point is it had appropriate driver in the image cd.
Now situation is, This new image copied ever thing over.(I can mount it using LIVE CD). But When I boot up server it wont see vg volume group. I believe scsi driver is missing.After booting from LIVE CD I chroot in root used yast to add initrd modules, qla2xxx, mptbase, mptscsih(other server(B) had those). Still when I reboot it, it get stuck saying
Code:
No volume groups found
unable to find volume group
waitnit fot device /dev/vg1/root
to appear .... not found device nodes:
.....
......
.....
No root device found. exiting to /bin/sh
sh: cant access tty; job control turned off
View 1 Replies
View Related
Feb 15, 2010
i m facing same error in most of the HCL servers. the problem is that it throws error while booting and sometimes not throws error. the error is :-
Feb 13 13:17:25 fe13s kernel: Adapter 0: Bus A: The SCSI controller was reset due to SCSI BUS noise or an invalid signal. Check cables, termination, termpower, LVDS operation, etc.
Feb 13 13:17:30 fe13s kernel: Adapter 0: Bus B: The SCSI controller successfully recovered from a SCSI BUS issue. The issue may still be present on the BUS. Check cables, termination, termpower, LVDS operation, etc
Feb 13 13:29:15 fe13s kernel: Adapter 0: Bus B: The SCSI controller successfully recovered from a SCSI BUS issue. The issue may still be present on the BUS. Check cables, termination, termpower, LVDS operation, etc
code....
View 2 Replies
View Related
Apr 11, 2011
In my understanding, the way /proc/scsi/scsi gets populated, /proc/paritions also gets populated in the same fashion. i.e. the description for first entry of /proc/scsi/scsi can be seen in the first entry of /proc/partitions and same for rest.
So, With this assumption, in my project, I used to relate first entry of /proc/scsi/scsi with first entry of /proc/partitions to get its total size and same for all entries.
But, I observed some differences in following scenario, where
1) The first 4 entries in /proc/scsi/scsi are SAN luns attached to my system and for which the actual device names in /dev/ are sda,sdb,sdc and sdd.
2) The last 4 entries are the internal HDDs on same system. In /dev/, their respective device names are sde,sdf,sdg & sdh.
(Output attached at end of the thread)
But in /proc/partitions, the device order is different.
You can see their respective sizes in /proc/partition output as well.
So, my question is, in this particular scenario, I can't relate the first entry of /proc/scsi/scsi with first entry of /proc/partition. i.e. scsi0:00:00:00 is not /dev/sde, because it is actually /dev/sda.
It seems that my assumption is wrong in this scenario.
Is there any way or mechanism to figure out actual device name for an entry in /proc/scsi/scsi in /dev/ directory?
How can my application should relate /proc/scsi/scsi entries with their respective device names and sizes?
View 2 Replies
View Related
May 4, 2010
When I enter "cat /proc/scsi/scsi" I'm returned with "cat: /proc/scsi/scsi: No such file or directory". I've tried this on two different installs on two different machines.
View 6 Replies
View Related
Jun 23, 2011
Some of our workstations have LTO's attached and they seem to drop off every now and again, the only thing which picks them up again (besides a reboot) is the famous rescan-scsi-bus script from here
The thing is that I'd like non-root users to be able to run this script, which in turn needs root to /proc/scsi/scsi
View 2 Replies
View Related
Apr 9, 2010
I'v not seen any security or any other updates,including firefox for many months(since January or earlier. Is there anything wrong?
View 9 Replies
View Related
Feb 23, 2011
I tried to compile with latex (pdflatex) some beamer presentations and I getpdflatex astrosiesta0411.texwarning: kpathsea: configuration file texmf.cnf not found in these directories:usr/share/texmf/web2c.This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/openSUSE)I am not a latex expert, but in yast I noticed that suse 11.3 is now installing texlive (I have also the texlive-bin bin-latex latex and latex-doc installed) while my old 9.2 where everything worked had tetex.I found that there is no directory web2c in /usr/share/texmf, but there is one in /usr/lib/texmf/.I also found that /usr/share/texmf/README says:And yet another: texmf-dist should be distribution-independent, so that,in theory, it could be used by distributions other than TeX Live. So,no web2c/kpathsea-specific files.
View 9 Replies
View Related
Jun 2, 2010
I am with a customer who has Suse 10.1 in production environment and connected to the internet.For now I want to install denyhosts on this machine since I see lots of failed login attempts outside office hours.However when I do: python setup.py install I get the message File "setup.py", line 4, in ?from distutils.core import setupmportError: No module named distutils.coreI don't know how to solve this. I have added a repository to install distutils.core but could not find it
View 1 Replies
View Related
Nov 6, 2010
I have a Rosewill RNX-N150pc wireless card that's been working great with Suse 11.2. But with 11.3, it's able to scan for my wireless network, and I see RX/TX packets moving, but DHCP isn't able to get an address. I've tried the 2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0 and 010_07_16_RT3062_Linux_STA_v2.4.0.0 drivers from the Rosewill site, and the rt3562sta-kmp-desktop-2.4.0.0_k2.6.34.0_12-1.1.i586.rpm package from Suse, all with the same result. I've even tried forcing an IP address on the interface with 'ifconfig', so my current guess is that the WPA-PSK security isn't working.
[Code]...
View 6 Replies
View Related
Oct 23, 2010
Suse 11.0 nvidia software repository not working when the updater is run, and it gives an error message which indicates it must be out dated and no longer used. Here is the site in my repository for nvidia; [URL], I did try to add a new nvidia repository site with that Yast tool, but I could not get it to fully work. The new one I did find was as a ftp type, not [URL]. With this older Suse 11.0, and kernel 2.6.25.20-0.7-pae, then is it true that there may not be any more nvidia display driver updates available.? So then I should just remove that nvidia repository from the list, and be okay if the kernel does not update too much newer version, right ?
View 4 Replies
View Related
Aug 28, 2011
the contact between the pencil and the tablet-drawing-surface does not result in activation. The only way get the pen drawing is by pushing the middle button on the tablet (there are a row of buttons in one side of tablet).By drawning in this rather awkward way a lot of unstable behavior is detected (freezing, drop outs etc.). The same problem occurred in ubuntu 10.10 with linux 2.6.37, in 11.4 with 2.6.38 and 2.6.39 it was gone. I believe that the problem might by in the kernel! In openSUSE i have this kernels 2.6.37.6 , 2.6.39.2 and 3.0.3.2. non of them seems to have the solution that makes the Hanwang work well.. Is it some kind of patch that are missing in openSUSE or is something not set up correct?
View 6 Replies
View Related
May 14, 2010
i hav a system which is never connected to internet. I had installed opensuse 11.1 from dvd.But the media files r not working. I had installed gstreamer all sets. And tried to install codecs using a .ypm file i downloaded from the opensuse server but not working without internet. I can download any files in other system and copy it to my system.
View 3 Replies
View Related
Mar 15, 2011
I installed OpenSuse 11.4 (x86_64) a couple of days ago.One of my Drives a PC-DVD RAM (Creative) is not working. This worked under 11.3.The SCSI drive is connected to a PCI/SCSI adapter (AHA-2904).The message I see at boot is: ata_id[443]HDIO_GET_IDENTITY FAILED /dev/sr1I also see the message ata_piix not found, and can not find an option in the kernel
to provide this.his causes the system to wait a long time and slows down boot dramatically
View 1 Replies
View Related
Mar 5, 2010
What would be the preferred method to establish a remote desktop session from one 11.2 machine to another 11.2 machine in the same location? No firewalls, local connection only. I've looked at VNC, RDP with xrdp, have not been able to establish a session to desktop. I would rather not use desktop sharing if possible, don't want invitations involved. Want something similar to hitting from Windows with VNC3and taking over the established desktop session. This is in my house, no security risks involved
View 9 Replies
View Related
Jun 25, 2009
I have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies
View Related
Feb 14, 2010
I have openSuse 11.2 on my Omnibook 6100. I have a netgear wg511 v2 wireless pcmcia card. I used ndiswrapper to install the drivers for this card. Ndiswrapper shows the driver installed properly and shows the card is present but the card will not even power on. What could be the cause of this and how do I fix it?
View 4 Replies
View Related
Oct 4, 2010
I use Termlite from SCO as my terminal emulator. It works on SUSe 9.3 but i can not get it working on 11.3. How do I enable the networking for this in SUSE 11.3.
View 1 Replies
View Related
Mar 6, 2011
I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies
View Related
Jan 3, 2011
Iam newbi to SUSE, I installed java in my SUSE linux Server edition, So i want to set the path in linux,So i created .bash_profile in in /root path using touch and added the path as "JAVA_PATH". When restart my linux the above command is not working and it show unknown command "JAVA_PATH", I can't able to boot in GUI mode, I can boot only in terminal mode, How to delete the file (.bash_profile in /root) ? And how to add java path in SUSE
Note: Before all the commands are working fine
View 3 Replies
View Related
Aug 3, 2010
Few months ago I had updated my OpenSuse 11.2 to new kernel but I broke it so never got to fix it. Now I've upgraded it to 11.3 and its working really well. Really happy with the KDE interface. Not missing Windows 7 at all (dual booting). I've got almost everything working and in fact got a lot more apps than Windows. For example 2 or 3 different versions of MSN Messenger!
I've got couple of minor issues. Firstly, my Logitech Webcam isn't getting detected by OpenSuse. When I open up the Cheese app it doesn't detect any cam.
Secondly, is there a Yahoo Messenger available for Linux? I've got some family/friends who use MSN and others Yahoo. I need webcam functionality in Yahoo Messenger.
View 1 Replies
View Related
Nov 12, 2010
I'm running Suse 11.3 fresh install, works fineBut I'm trying to make work a wusb54gv2, ndiswrapper -i works fineI'm using lastest ndiswrapper versionit seems tha options -m -ma -e maybe others don't workwhen doing ndiswrpper -l
goldf-fish:/ # ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
wusb54gv2 : driver installed
[code]...
View 20 Replies
View Related
May 8, 2010
I'm running vanilla SuSE 11.1 on a vanilla server with Webmin 1.51 and Apache 2.2.
For a month now, I've been trying to get virtual hosts to work with Webmin without success. When I browse for the second site, I continually come up with the default host site.
just forget Webmin and modify the httpd.conf file directly. That defeats the purpose of trying to use Webmin.
View 9 Replies
View Related
Jan 27, 2010
After installing Suse 10.0 I'm unable to get my network card working. Also the volume control in the task bar in not working. Using Yast I tried configuring network card. The exact card is not on the list provided by Suse. Is this the problem & how do I fix it?
View 2 Replies
View Related
Nov 24, 2009
It is me again. I have succeded and make video and audio working in Skype but I cant make Microphone working at all. Tried some info I found on the web but no way.
View 7 Replies
View Related
Aug 23, 2010
Just installed opensuse 11.2 (64-bit version) and I have a problem with the Mplayer browser plugin. Basically it comes up OK, I get the MPlayer plugin splash screen and controls exactly as expected, it downloads the media successfully (or at least looks like it does) but then doesn't play, it just reports "Stopped".
Mplayer itself works fine, it's just the browser that doesn't.
System info:
OpenSuse 11.2 (64-bit)
kernel-desktop 2.6.31.5-0.1.1-x86_64
MozillaFirefox 3.5.11-0.1.1-x86_64
mplayer 1.0rc4_r31930-1.pm.3.1-x86_64 (from packman repo)
mplayerplug-in 3.55+cvs20100124-0.pm.1.1-x86_64 (from packman repo)
View 2 Replies
View Related
Feb 3, 2009
I have been using openSuse 10.3 on my laptop since 6 months now. Only last week i came to know about this bootable kde suse : http://news.opensuse.org/2009/01/09/...-opensuse-111/
When i was done succesfully booting from the usb stick, and came back to my good old suse10.3 on my laptop, i found out that the system sound has suddenly stopped working. My sound is coming with my usb stick, but not with my native os.
View 5 Replies
View Related
Aug 2, 2010
I'm having issue with trying to put the 11.3 DVD iso to a USB pendrive...I've verified the ISO md5sum matches, formatted the pendrive to FAT32, unmounted and finally done:
# isohybrid openSUSE-11.3-DVD-x86_64.iso
# dd if=/path/to/iso/openSUSE-11.3-DVD-x86_64.iso of=/dev/sdX bs=4M;sync
Everything appears to work fine, but once I try to boot I geterror saying no installation CD/DVD is not found and is asking for software installation repository, so I select the media as hard drive since if I select cd/dvd drive, the messag "no repository found"...then I select the USB drive (sdc1 4.2GB, iso9660, openSUSE-DVD) then it asks for "enter the source directory"...I'm not certain what to enter there, so I just point to the root directory "/" and installation continues...followed by "no new driver updates found"....so GUI starts up again...it loads kernel modules, to confirm "usb-storage"...then a message "the partitioning on disk /dev/sdc is not readable by the portioning tool parted,...." I click OK...finally I get stuck on
View 2 Replies
View Related
