SUSE / Novell :: SCSI Drivers - Getting Stuck At No Volume Groups Found
Jul 21, 2009
I made an image of a server(A). It did not work because It did not see /dev/sda. So I used another cd from indentical sever(B), cd which had work. Then mounted the nfs copy the image over. Server(B) had slightly older version of sles. And its not using lvm. But point is it had appropriate driver in the image cd.
Now situation is, This new image copied ever thing over.(I can mount it using LIVE CD). But When I boot up server it wont see vg volume group. I believe scsi driver is missing.After booting from LIVE CD I chroot in root used yast to add initrd modules, qla2xxx, mptbase, mptscsih(other server(B) had those). Still when I reboot it, it get stuck saying
Code:
No volume groups found
unable to find volume group
waitnit fot device /dev/vg1/root
to appear .... not found device nodes:
.....
......
.....
No root device found. exiting to /bin/sh
sh: cant access tty; job control turned off
View 1 Replies
ADVERTISEMENT
Apr 8, 2009
Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"
View 2 Replies
View Related
Feb 4, 2010
Everything went wrong no sound, no scsi to scanner, printers, and kde only using failsafe. So, did a new install and still probskde stops half way through saying it there is no file in /lib/modules/2.6.31-5-0.1-desktop
Fixed prob by creating a copy of 2.6.31-8.0-desktop
kde only starts with x11failsafe
On failsafe boot (from GRUB) load of messages daying can not find disks then mess Doing Fastboot
At least I've got sound though printer still a prob
Any ideas how to fix the kde start up?
config
ASUS M4A78-E, AMD xenon III 550, 4GB mem
SUSE 11.2 standard KDE, network install
View 4 Replies
View Related
Mar 20, 2011
I just imaged my RHEL 4 system that was running on a Dell Poweredge 2950 server using Acronis software and I restored the image to a VmWare virtual machine.
Dell Poweredge 2950 - RAID 5
VmWare - using ESX 4.0
OS - Red Hat Enterprise Linux 4 ES Update 5 x64
kernel - 2.6.9-55.0.9.ELsmp
I'm getting the following when I try to boot on the new virtual machine. I'm thinking it has to do with the fact that it's new hardware and it's having trouble either finding the right drivers or pointing to the correct place.
"No Volume Groups found
Volume Group "Volgroup00" not found
ERROR: /bin/lvm exited abnormally! (pid505)
mount: error 6 mounting ext3
mount: error 2 mounting none
switchroot: mount failed: 22
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init!"
I was able to boot into Linux rescue mode using the boot CD. Then I typed:
#chroot /mnt/sysimage
Here's all the info from the commands I typed:
#ldd /bin/bash
libtermcap.so.2 => /lib64/libtermcap.so.2
libdl.so.2 => /lib64/libdl.so.2
libc.so.6 => /lib64/tls/libc.so.6
/lib64/ld-linux-x86-64.so.2
#uname -a
Linux localhost.localdomain 2.6.9-89.EL x86_64
#df -h ....
I've tried the following:
1. mkinitrd -v -f /boot/initrd-2.6.9-55.0.9.EL.img 2.6.9-55.0.9.EL
2. modified the device.map to point to /dev/sda3
3. changed the SCSI controller in Vmware to use BusLogic instead of LSI Logic. (didn't work because I'm running 64 bit.. gave me an error message)
4. grub-install --recheck /dev/sda
5. tried booting to differerent OS versions (i.e. 2.6.9-55.0.6, etc.). I tried all of the versions listed in the boot menu.
None of these worked.
View 2 Replies
View Related
May 5, 2011
I'm working on a kickstart install to automate a lot of monotony doing installs. When i use the kickstart install i get an error on boot saying "File based locking initialization failed" "no volume groups found". Then it proceeds to boot up with no issues and appears to work just fine. Below is the section of my ks.cfg for creating the partitions: %include /tmp/partition.cfg is included where the partition info usually occurs. The user is prompted in the pre script for how large they would like the partitions to be and then the script below creates the included file with partition info
[code]...
View 3 Replies
View Related
Apr 6, 2010
is it possible to extend a mirrored veritas volume which has two SAN LUNs each one in a seperate EMC storage box.
i need to add diska -> EMC box1
and diskb -> EMC box 2
then i need to increase the size of the mirrored volume.
View 1 Replies
View Related
Aug 5, 2010
Complete n00b here. I am running openSUSE 11.3 and trying to load drivers for a network card. When I try to make install, I am getting this error:
Code:
Makefile:69: *** Linux kernel source not found in any of these locations:
Makefile:70:
Makefile:71: *** Install the appropriate kernel development package, e.g.
Makefile:72: *** kernel-devel, for building kernel modules and try again.
How do I install the kernel-devel?
View 4 Replies
View Related
Apr 30, 2010
It seems to be related to some kind of gcc library missing, but I went into YAST and I've installed the kernel sources, headers, devel, and a bunch of other things I found in various forums. I consistently get an error message about GLIBC_2.11 not found, even if I just do gcc -v. Contents of config.log:
[code]....
View 12 Replies
View Related
Oct 12, 2010
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies
View Related
Sep 7, 2010
i ran into a problem when i installed mplayer on suse 11.1 from source, it works just fine BUT it has no GUI.When i try to use the command "gmplayer", it returns 'bash: gmplayer: command not found
View 3 Replies
View Related
Jul 2, 2011
Adding a kernel parameter to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nodmraid" (not 100% it should go there grub2 is new to me, but that is another story) I noticed the following error when running update-grub.
ERROR: ddf1: wrong # of devices in RAID set "ddf1_Series1" [1/2] on /dev/sdb No volume groups found
Now I have not a clue where it is getting ddf1_Series1 from.sdf1 is part of a RAID1 group that has mdadm RAID1 > luks > LVM
md6 : active raid1 sdi1[1] sdf1[0]
1465135936 blocks [2/2] [UU]
bitmap: 0/175 pages [0KB], 4096KB chunk
Errors bug me.. as I am new to grub2 was wondering if anyone has an insight into the error / where to investigate Still reading the grub2 / grub manuals.
View 3 Replies
View Related
Oct 31, 2010
We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.
We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:
We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.
View 4 Replies
View Related
Jul 20, 2010
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
View 4 Replies
View Related
Nov 18, 2010
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies
View Related
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Sep 8, 2010
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies
View Related
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
View Related
Nov 4, 2010
I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies
View Related
Aug 23, 2010
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
View 2 Replies
View Related
Feb 1, 2010
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
View 3 Replies
View Related
Oct 13, 2010
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies
View Related
Jul 19, 2010
New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies
View Related
Feb 4, 2010
The software use to work well here, but now I got this when I try to run it
sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory
But I can not find it.
I also tried
cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0
but this does not work neither.
View 4 Replies
View Related
Jan 22, 2010
I'm new to LVM. I use Red Hat and CentOS 5. I'm setting up a database server and I want to setup the local drives for performance. My plan is to have three storage locations, 1st for Linux, 2nd for the application, and 3rd for the data files. Each location will be appropriately redundant. The OS and application drives will be local. Because my goal is to dedicate one spindle for the OS and another for the application, is there a best practice that would say I should create two LVM volume groups.
Each with one logical volume associated with one of the physical partitions or one LVM volume group with two logical volumes each associated with one of the physical partitions? I've read that a physical disk can only belong to one volume group. So if I want to add 70GB to both logical volumes, I could add a single 140GB drive to a single volume group and then add half to each logical volume. If I have two volume groups, I would need to add two additional disks. I may be missing an obvious consideration or be missing a basic concept of LVM.
View 11 Replies
View Related
Apr 28, 2009
I've been using LVMs on some of my Linux servers for years without fully "getting" them. Doing a lot of things by rote. As I setup a new RAID though, I realize I don't have to be so rigid. I inherited a mission critical server with five independent disks
Code:
/dev/sdb1 /usr1
/dev/sdc1 /usr2
/dev/sdd1 /usr3
/dev/sde1 /usr4
/dev/sdf1 /usr5
I've bought an external RAID5 box that I plan to migrate the data to and was planning on this layout.
Code:
Method 1
VGLogVol
/dev/sdb1/usr1 -> usr1disk1
/dev/sdc1/usr2 ->usr2disk1
/dev/sdd1/usr3 ->usr3disk1
/dev/sde1/usr4 ->usr4disk1
/dev/sdf1/usr5 ->usr5disk1
Mainly because the 1 to 1 correspondence is easy for me to understand, and what I'm used to. But I realize it doesn't have to be that way, and I could have one VG with all the LVMs as parts of it, i.e.
Code:
Method 2
VGLogVol
/dev/sdb1/usr1 -> arrayusr1
/dev/sdc1/usr2 ->arrayusr2
/dev/sdd1/usr3 ->arrayusr3
/dev/sde1/usr4 ->arrayusr4
/dev/sdf1/usr5 ->arrayusr5
Is there any advantage to one way over the other? Would using one VG with multiple LVs be kind of like "putting all my eggs in one basket"? Do more VGs and LVs introduce unwanted overhead into the LV Mgr that should be frowned upon? If both methods are equal, I go with the method1. Just more clear to me. But now that I understand the second, I could go that way, if there's a compelling reason.
View 5 Replies
View Related
Jul 1, 2009
I'm experimenting on a new 5.7TB raid we got for one of our servers before it goes into production. I'm carving the space up into Volume Groups and Logical Volumes. Below is some sample output:
[root@server newhome]# vgdisplay
--- Volume group ---
VG Name extraid_sdd1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 2
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 1.82 TB
PE Size 4.00 MB
Total PE 476804
Alloc PE / Size 476804 / 1.82 TB
Free PE / Size 0 / 0
VG UUID LJPJVE-fekS-crS8-uugk-l13z-0NG0-FWv3M3
--- Volume group --
VG Name extraid_sdb1
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 2
Act PV 2
VG Size 3.64 TB
PE Size 4.00 MB
Total PE 953608
Alloc PE / Size 953608 / 3.64 TB
Free PE / Size 0 / 0
VG UUID kzlLN4-PyrX-LYUS-h1Tc-1S9F-jVV0-XU5tcK
Because I created this, I know that the second 3.64tb Volume Group, extraid_sdb1, is composed of two physical volumes, /dev/sdb1 and /dev/sdc1, each one 1.82TB in size. My question is, if I hadn't made this and had to work backward, how could I discover that info? I can see that the second VG is composed of 2 PVs by the "Cur PV" line. But if I didn't know that they are my /dev/sdb1 and /dev/sdc1, how could I break that out, as well as their sizes? If it matters, this system is running FC6.
View 1 Replies
View Related
Mar 15, 2011
I installed OpenSuse 11.4 (x86_64) a couple of days ago.One of my Drives a PC-DVD RAM (Creative) is not working. This worked under 11.3.The SCSI drive is connected to a PCI/SCSI adapter (AHA-2904).The message I see at boot is:ata_id[443]HDIO_GET_IDENTITY FAILED /dev/sr1I also see the message ata_piix not found, and can not find an option in the kernel
to provide this.This causes the system to wait a long time and slows down boot dramatically
View 2 Replies
View Related
Jul 30, 2009
I have couple hard drives from different linux distro's. on the hdd's are logical volumes created. what i want to do is to backup the data from those hdd's. but when I connect some of them and boot up the system it
gives me an error that there are volume group duplicated and it list the UUID. My host system is centos 5. What is the best solution to rename those volume groups or to mount the drives from other systems, so the data will not get lost?
View 2 Replies
View Related
Oct 21, 2010
I am very new to LVM, as well as not especially experienced at linux, and have some questions about how lvm works. A few months back I set up a server running FC10 and tried creating Logical Groups during the the initial setup. We've realized that we are not using all the available space on the physical drive, and I realized that for some reason (I'm thinking this might have been the default?), we initially created two Logical Groups (VolGroup00 and VolGroup01) and it appears two Logical volumes in each (LogVol00 and LogVol01). LogVol00 in VolGroup00 is mapped to /, and the other Group was actually unused. I figure that it would be simplest to just use all this space mapped to /, so I thought the thing to do would be to simply merge VolGroup01 to VolGroup00. I tried this:
[root@office mapper]# vgmerge VolGroup00 VolGroup01
Logical volumes in "VolGroup01" must be inactive
So after a bit of research, I tried this:
[root@office mapper]# vgchange -a n VolGroup01
Can't deactivate volume group "VolGroup01" with 1 open logical volume(s)
So apparently There's an open volume, but I don't know how to go about closing it. I removed the LogVol00 from that group, but LogVol01 won't budge.
[root@office mapper]# lvremove VolGroup01
Can't remove open logical volume "LogVol01"
So how do I go about closing this Volume? At one point, there was some output that told me LogVol01 was being used as swap space. How do I handle that?
View 4 Replies
View Related
Apr 26, 2010
How to create multiple Logical Groups out of a single Physical Volume? Here is the Physical Volume I have created:
Code:
# pvdisplay
--- Physical volume ---
PV Name /dev/sda9
VG Name myVG1
PV Size 54.88 MB / not usable 2.88 MB
Allocatable yes
PE Size (KByte) 4096
Total PE 13
Free PE 11
Allocated PE 2
PV UUID bon4Ao-vmgC-aP1h-EC9X-w3tN-YXNu-0N2dAw
This is how I am creating a Logical Group out of the above Physical Volume:
Code:
# vgcreate myVG1 -s 4m /dev/sda9
Display:
Code:
# vgdisplay
--- Volume group ---
VG Name myVG1
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 5
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 52.00 MB
PE Size 4.00 MB
Total PE 13
Alloc PE / Size 2 / 8.00 MB
Free PE / Size 11 / 44.00 MB
VG UUID O6ljYC-bflz-EUTd-nf34-8gYe-Fh39-Bh3cOg
But I am unable to create one more Logical Group out of this Physical Volume. Can we accomplish it? Or do we always extend our current Logical Group to utilize the available space of a Physical Volume?
View 2 Replies
View Related
