OpenSUSE Network :: X11 Forwarding - Windows Client Works But It's Doesn't - Cannot Connect To X Server
Jan 20, 2010
I have x11 forwarding enabled in /etc/ssh/sshd_config on a suse 11.2 32 bit box running kde I can open x apps on a windows machine using xming and putty just fine, but when I boot the same machine into suse 11.2 64 bit using kde and try using konsole I get: cannot connect to x server
The command I'm using to log in is: ssh -X -l username host I doubt the problem is with the server I'm logging into or it wouldn't work in windows, not really sure what to look for as I've never had a problem using x11 forwarding from a linux client before only windows ones
View 7 Replies
ADVERTISEMENT
May 22, 2011
until 2 weeks ago I had o.S11.3 on both my Siemens and Asus laptops. I have installed NX No Machine. ( I know it's not open source,I am using the free version). With commandline ( root) /usr/NX/bin/nxclient I was able to connect to the other machines. I got Qt: Locales not supported on X server, the NX menu popped up and I was able to connect by inserting resp codes. After fresh install of o.S.11.4 on the ASUS the commandline (root) answers:
xlib: connection to":0.0" refused by server
xlib: No protocol specified
nxclient: cannot connect to X server:0.0
The ASUS can still be reached from the other machines (one with o.S.11.3,the third one with o.S.11.2 ) SSH ( Lan)connections are all working forth and back between the machines, even to and from Win XP, however only from Win 7 on the ASUS, but that's a Win7problem. Comparing the installed xorg-x11- server-extra : on o.S. 11.3 Additional X servers ( Xmdx,Xephir,Xnest,Xvfb ) ,on o.S.11.4 the Xvfb is missing, might that be the reason?
View 1 Replies
View Related
Jan 28, 2010
So a while back I was able to mount a directory from my OpenSuse server as a NFS on an Esxi server. After restarting the Esxi server, the NFS became inactive and I was unable to remount it. The error given was that the Esxi client was unable to connect to the Suse server. I was looking into the showmount -a command on the Suse server and it showed the mount point on the Esxi server. Could this be causing the Suse server to reject new attempts to mount the directory? What else can I try to fix this problem? Also I should note that both servers can ping each other.
View 2 Replies
View Related
Mar 26, 2010
we have here a few openSUSE-machines (some 11.1 and 11.2) which mounts their /home from a NFS-Server and imports the users via NIS. I now wanted to use X-Forwarding via SSH, but that doesn't work with NIS-Users.On my machine I use Gnome and my XAUTHORITY-Variable points to /var/run/gdm/auth-for-bup_deg-E3TMSz/database
Why isn't the default ~/.Xauthority-File used for my cookies? What do I have to change to get X-Forwarding in my Setup running?
View 1 Replies
View Related
Jan 12, 2011
With SUSE-9 I used pptpconfig to connect to a Windows VPN Server.With openSUSE-11.3 I created a VPN Network Connection,however I have no idea how to start the network connection.
View 1 Replies
View Related
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
May 9, 2010
using konqueror/dolphin to connect to my desktop and the connection is okay.fish://userone@192.168.1.101:12345 out of curiosity, in konsole typedssh userone@192.168.1.101:12345 and got and error messagessh: Could not resolve hostname 192.168.1.101:12345: Name or service not known Googled and got more confused
View 6 Replies
View Related
Sep 2, 2011
I am unable to connect to a WEP-protected network. the Network manager log shows either a DHCP timeout, or a failure to associate. (attached below).Changing to WPA is not an option, as the network is not controlled by me. This is with the rt61pci driver for a Ralink 2500 series chipset.(Rosewill RNX-G300EX card)Manually forcing an IP does not result in a connection either. This is with the latest OpenSuSE 11.4, all patches applied. Router is a D-Link DIR-613, and I know the passphrase I'm using is correct because it connects both on my Android (what else?) phone, and my lappy when I boot XP.
Sep 2 11:12:02 Core2Duo-2400 NetworkManager[2160]: <info> (wlan0): supplicant connection state: associating -> associated
Sep 2 11:12:02 Core2Duo-2400 NetworkManager[2160]: <info> (wlan0): supplicant connection
[code]....
View 7 Replies
View Related
Apr 9, 2010
I have an internal network behind a server <10.0.0.1> connected to the internet that NATs my ip <10.17.11.88> only. NAT is not allowed to any other ip addresses. When I use Transmission Bittorrent client to download torrents, The thing is that this 10.20.0.244 is not my machine and doesn't have access to the internet at all. What is happening here? Can anyone help me?
View 8 Replies
View Related
Oct 5, 2010
I recently donwloaded boinc and every time I launch I get this error "cannot connect to core client." I went through the guides and opened port 31416 in external zone, am I doing this right? The guide said to put it in the DMZ, what's the difference?
View 3 Replies
View Related
Sep 15, 2009
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
View 1 Replies
View Related
Sep 1, 2010
I'm setting up an LTSP server using Ubuntu 10.4 64bit, and PXE connecting with thin clients using Atheros cards. The ltsp environment is 32bit.
Unfortunately I get an error message with "No interfaces found! Aborting..." and a kernel panic early during PXE boot.
After an enormous amount of investigation, I've narrowed it down to (probably) being the fact that the ltsp chroot environment doesn't have the correct driver for my network card (I believe it's atl1c). The correct driver IS available in Ubuntu, though, as I can successfully boot the thin client from both 64bit and 32bit live CDs and bring up the network interface.
how can I install the correct driver in the PXE environment?
View 2 Replies
View Related
May 23, 2010
How do you configure the firewall to allow external web access (it's a LAMP server) and internal access for samba shares ?
View 6 Replies
View Related
Feb 24, 2010
I am not exactly newbie with GNU/Linux, but definitely new to SSH/NX stuffs. I followed the below tutorials for installing FreeNX so that I can access my desktop like TeamViewer in windows.
https:[url]....
https:[url].....
But I don't see the folder NX like the one mentioned here.Then edit the file /usr/NX/etc/server.cfg
I don't see a folder called NX to proceed. Also when I use nomachine client to connect from Windows, it couldn't connect and I get the below errors.
nxssh: <host-name>: no address associated with name.
how to make connect to freenx server from windows using nomachine client?
View 1 Replies
View Related
Jun 29, 2010
I would like to know how to install a webmail server and a suitable client to help connect to it that is compatible with both windows and linux ubuntu.
View 1 Replies
View Related
Jan 16, 2010
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
View 8 Replies
View Related
Mar 20, 2010
I have reinstall my server. I think everything was okey. But i can not connect my server with NX Client.
View 3 Replies
View Related
May 12, 2011
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies
View Related
Dec 7, 2009
If I forward port 5764 to port 80 to my VOIP device, I can nmap and get a proper connection. If I forward port 5764 to port 22 to my server, it comes up filtered. It even happens if I try forwarding port 80 to my server. So I'm sure it has something to do with my server, but I'm not sure.Here's my Linksys iptables:
Code:
:wanin - [0:0]
-A FORWARD -i vlan1 -j wanin
[code]....
View 2 Replies
View Related
Aug 18, 2010
I'd like to have my Samba client update Windows DNS then join in domain. Computer join in domain but DNS not update.
OS: OpenSUSE 11.3
Try after join in domain:
net ads dns register -d 3
[2010/08/18 20:47:17, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
[2010/08/18 20:47:17, 3] param/loadparm.c:4929(init_globals)
Initialising global parameters
[2010/08/18 20:47:17, 2] param/loadparm.c:4788(max_open_files)
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2010/08/18 20:47:17.871064, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2010/08/18 20:47:17.874091, 3] param/loadparm.c:7842(do_section)
Processing section "[global]" .....
Windows Workstation update DNS this domain. DNS mydomain.ru resolved.
View 1 Replies
View Related
Feb 23, 2010
I have already windows 2003 server with active directory, with 200 + user accounts and each user has allocated a specific disk quota. Now i want to install suse on client side so that it can do all same things as windows clients does(active directory login and disk quota). I have downloaded 11.2 suse linux and installed all samba required pakages and also joined the windows domain (2003 server). how can i access my user space located on win 2003 server from my linux client machine.
View 3 Replies
View Related
Mar 30, 2011
I'm not able to connect to my university's internet facilities under openSUSE 11.4. I have been able to connect in the past and I am still able to connect in Windows 7.When I try to connect to the university WiFi, a valid IP address is assigned to me and the gateway address appears to be correct, so I don't see a problem in the DHCP negotations. Same with my university's Ethernet: I get a valid IP address, but I can't connect to the internet.When I browse to any site with Chromium/Chrome/ Firefox/lynx/curl, the page is stuck at "Sending request". I have tried disabling my firewall - that didn't solve anything.I don't know what else I can try and the campus' network administrators are puzzled. How can I resolve my issue?
View 7 Replies
View Related
Jun 5, 2011
i was wondering if any of you have installed frostwire, because i managed to install frostwire from a fedora rpm package, it runs but doesn't connect to network, it says something like this "frostwire cannot find a network please check your firewall settings and restart again"
View 1 Replies
View Related
Jan 15, 2010
I installed a new 11.2 and now my huawei e1692 works (thanks to huawei e1692 don't work -
openSUSE Forums).
kde=Versione 4.3.4 (KDE 4.3.4) "release 2"
kernel=2.6.31.5-0.1-desktop
[code]...
View 4 Replies
View Related
Nov 7, 2010
I have done a fresh install of the OS and I am having wifi trouble. I am failing in connecting to an access point that Windows works fine with on the same machine. As far as I can tell it is connecting but not getting an IP address via DHCP. when running ifup it says its backgrounding getting an ip address.
View 9 Replies
View Related
Oct 5, 2010
i'm experiencing some weird behaviour: I have a server running ubuntu 10.04 and two Apple laptops in my home network. Sometimes after booting up the server doesn't connect to the wireless network, but instead "kills" the connection of the laptops. (The network then isn't available for about two minutes - it's showing but it can't connect) On the server the network interface is up, but not associated.
Sometimes the interface isn't configured properly (iwconfig isn't showing an entry) - but in this case the behaviour obviously isn't showing. some information about my system:
Ubuntu Version: Server 10.04x64
Wireless Card: Netgear WG311v3 with marvell chipset
Driver: ndiswrapper+mrv8335x64
View 4 Replies
View Related
Mar 27, 2011
I have 2 different networks: the first one is gateway machine (eth0), and the second is a private machine (eth1). So, I've configured the iptables and forwarding stuff and when I try to ping google.com on the gateway machine, it works, while it doesn't work on the private network. Note: I am using VmWare 7. I need your quick assistance about this issue.
View 2 Replies
View Related
Jun 30, 2010
i'm using opensuse 11.3 and can't connect to the internet, my eth0 interface (which would be my modem i suppose) is found and when i "activate" it with ifup eth0, it gets stuck waiting for data (says so in ifstatus). If i try with knetworkmanager it is also stuck and doesn't connect to eth0. If i try to make it connect at boot, it doesn't work either.
I think the problem might be that in windows xp my modem has a "limited connection" but i can connect with my pppoe password anyway, but opensuse won't let me connect until it finds eth0 is working correctly which it never will because of how the internet company configures the modems i think. I don't know with which command i could "force" the pppoe connection even without a good connection to the modem, maybe that would work. But on the other hand, with other distros i can connect just fine so i don't know really.
View 1 Replies
View Related
Oct 11, 2010
I installed SLES 10.2 with SAMBA 3.5.5.43 to retire our old Microsoft Windows 2000 Server and save some money. All was fine until last week when our chief asked to me to set password expiration for all clients. This morning, all users cannot logon because, when they logon, windows asks to change password and then it gives error error "Access Denied".
[code]...
View 1 Replies
View Related
Dec 27, 2010
Background:I have a small PC104 running opensuse 11.1. I'm writing a small client/server application for debugging purposes using mono and WCF. All the client does is make a request for information every 100ms.Problem:After about 20 requests the server quits responding to the client. Even if the client is running on the same machine. I've run the exact code on another laptop running opensuse as well as a laptop running windows and everything works great. Hopefully that closes the option that it is a code, mono, or opensuse flaw.Is there a kernel option or a network option that anyone knows about that might cause this sort of behavior?
View 3 Replies
View Related
