I've got an Olympus 256MB xD picture card that I would like to have mounted on my SuSE. In windows, a few seconds after putting it into the slot on my Toshiba laptop, it is mounted as a drive. In my OpenSuSE 11.3 (KDE 4.4.4), nothing happens. Is there some software that I can get or some setting I have to tweak in order for it to be mounted?
View 1 RepliesWhen I hover over an open programme which is on the task bar I get a pop up, but instead of a picture of the actually programme I get a grey box like this
View 3 Replies View RelatedWhen I insert the xD card into the built-in 5 in 1 card reader of my laptop it doesn't work. An SD card for example does work with this reader, so it is not a "faulty hardware" problem we are talking about right now, and neither is a "HW is not recognized" kind of a problem. My card reader is seen as a
Code:0f:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)in the lspci output.I use debian testing with a 2.6.32-trunk kernel (what is this "trunk" here anyway?)I know this isn't a unique problem and with a cheap external USB powered card reader (I have one) this whole thing can be worked around, but still.
My SD card is recognised by OS 11.3 if it is inserted at boot up. If I remove it and reinsert it, the devise monitor states 'no devices plugged in'. This is a problem that I have also had (and reported in these forums) with 11.0, 11.1, 11.2.Now I notice that there is a section for 'removable devices' in the system configuration. But even if I click the box 'enable automatic mounting of removable media' and the sub-box 'automatically mount removable media when attached' the SD card is not remounted, there remain 'no devices plugged in'.
View 9 Replies View RelatedI have a build-in card-reader in my notebook. When I insert a sd-card the card is mounted but as soon as I start copying the files to the harddrive, the sd-card will unmount and than mount again. Every time I start copying I have the unmount followed by a new mount. I tried with different sd-cards and I have the same problem. Card reader works fine on windows. But now I don't have windows anymore on this notebook so I need to use the card-reader on opensuse.
View 9 Replies View RelatedI'm trying to use Pinta Image Editor but I cannot find an option to preview the image, in a viewable size, before I work on it.
what to do in this situation? Prefferably it would be nice to view all the pictures as thumbnails.
I have opensuse 11.3 installed, and my motherboard has the intel i845 chipset,
one day windows had enough of the intel graphics chip and would not let me have anything but 640x480 pixels, well you cant do much with that so I put an ati card in and disabled the intenal graphics. windows was happy enough but suse could not boot - more specifically could not mount the root filesystem, saying it had errors (did a very quick fsck), could not find the journal, and I had a bad superblock. the "failsafe kernel" was no better. If I take the ati card out suse boots fine. however I do swap frequently between windows and linux and changing graphics cards between boots is somewhat irritating.
i had just edited a picture in digikam that was going to be my new desktop wallpaper.when i went into system/preferences/appearance to make the new change it would not show the new picture that i had just edited as a choice to change my new wallpaper to. then i tried closing the appearance box and it would not close.then i shut down and restarted and when i bring up the appearance box it does not let me click on anything within.also can't close it.seems like other applications are working normally.
View 9 Replies View RelatedI got a digital picture key chain and it comes with windows software. I plugged it in and it's detected as a read only usb storage, so I can't upload any pictures in it
View 3 Replies View RelatedWhen I open Dolphin to view my pictures all the icons are that of a "hot air balloon". How can I change these to show the actual picture of the file like M$ does?
View 3 Replies View RelatedI have the 64bit version of SuSe 11.2 installed on my PC. For some reason it cannot read a Jessops photo cd which reads ok on a windows pc or any other cd with photos on it, it has no problem reading other cds with program files on them.
View 9 Replies View Relatedi am using Fedora 12.
i have a 1 GB SD card and a 4 GB SD card.
Using a USB flash reader, when i plug in the 1 GB SD card, dmesg shows
Code:
usb 1-5: new high speed USB device using ehci_hcd and address 11
usb 1-5: New USB device found, idVendor=058f, idProduct=6331
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
[Code]....
(i was suspecting that it could be due to the 4 GB size being too large, but that's very unlikely, since i am able to mount a 16 GB micro SD card - through an Android phone though, not the USB reader.)
I am running Opensuse 11.3, KDE 64 bit. I have a nvidia GeForce 9400 GT graphic card.Somehow Dolphin and Firefox cannot show picture preview.It comes out like this; ImageBam - Fast, Free Image Hosting and Photo Sharing ImageBam - Fast, Free Image Hosting and Photo Sharing.
View 9 Replies View RelatedI am running 11_4, KDE4.7 I loaded CinePaint cinepaint-0.25-3.10.x86_64.rpm from the multimedia:color_management/openSUSE_11.4 repo. It opens, but crashes if I try to load a jpg for edit or try to create a new picture.
View 8 Replies View RelatedWhen i stream on sites like ....., megaupload etc. it's fine However when i try to put it into full screen the picture is all funny looking I just installed suse on my others computers and one of them seem to be only having this problem.
View 9 Replies View RelatedI added an entry to grub's menu.lst and reran grub (grub-install hd0) and now my background is gone and the entries just show up like on a normal console.
I searched the forums and I couldn't find anything. Does anybody know why this happened and how to fix it?
I have not changed anything in menu.lst except for adding the new OS.
I have Dell Vostro 3300 with Intel HD integrated graphic card and Samsung SyncMaster 2343BW external monitor.
This is the output of xrandr:
It runs on 2048x1152 full resolution, however, the picture on the monitor is blurry, it vibrates and looks like old TV with interlacing.
I tried to disable output to LVDS screen on laptop using xrandr but it doesn't help/
Previously I had HP laptop with integrated Intel and OpenSuse 11.0 and the external screen worked normally.
How this can be done? I already have the necessary codecs installed and have kde 4.2.
View 9 Replies View RelatedIt seems I cannot mount and unmount a USB Drive, it gives me the following error:
Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/DAVE-1
I have changed FSTAB, and now it looks like this:
proc/procprocdefaults00
sysfs/syssysfsnoauto00
usbfs /proc/bus/usb usbfs auto,user 00
devpts/dev/ptsdevptsmode=0620,gid=500
code....
I've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
On SUSE 11.2 when a CD or DVD is automounted (in the /media directory) it appears that the mount point chosen for the disk always has extra blanks at the end of the mount.
For example, if the label on the CD was DISK-001, the mount point chosen by SUSE is
/media/DISK-001 /
In 11.1 (and earlier) the mount point would have been
/media/DISK-001/
I'm assuming that the trailing blanks are filling in unused or blank chars at the end of the CD label.
Is there any way to change this annoying behavior? I much prefer NOT to have trailing blanks in the mount point.
I'm on slackware 13.1 using XFCE for my desktop manager. Out of the box, verything is configured to just mount any device by some name the system determine. If the device has no labels, it may just say "160GB" or "SD/MMC".
It was working fine but all of a sudden, my SD card started appearing with "1(LA" in place of something like "SD/MMC". I've tried rebooting, remounting but haven't figured out how to fix this.
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
I've recently purchased a Lenovo Ideapad z470, and installed Debian Wheezy amd64 on it first thing. I was pleased to find that almost everything worked "out of the box." The only problems were the hotkeys and the card reader. I don't care if the hotkeys ever work, but the non-working card reader is more aggravating than I anticipated. I would be most obliged if anyone could lend a hand.So, first things first, here's the output of uname -a:Linux cerulean 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64 GNU/LinuxHere's the syslog output upon inserting an sd card into reader:
Jul 25 22:19:45 cerulean kernel: [11472.262103] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
Jul 25 22:19:45 cerulean kernel: [11472.354801] usb 1-1.3: New USB device found,
[code]....
I bought a micro sd card for my BB 9000 and having a lot of trouble with it. windows as it just doesn't work or maybe it is that the card i bought is faulty? Probably too late to get my money back from paypal now :0(. I did this
$ lsusb
Bus 002 Device 006: ID 0e8f:0021 GreenAsia Inc.
Bus 002 Device 005: ID 17a0:0001
Bus 002 Device 004: ID 04a9:2207 Canon, Inc. CanoScan 1220U
[Code]....
while the BB was connected. And you will see byt the attached pic that the sd card is not mounting. I can't see where the card is now. The file manager did list it but can't remember where. With all the other drives(i have 2 hard drives) but now i can't see it. There is some confusion as to wether the music that the BB software i used via windows put the music on the BB device or the card. Different things say different things. The filemanager on the BB suggests the files are on the card but when i go to add more files i get an error saying the device is full. The device can only hold 1gb of files including installed apps. I probably haven't mentioned everything here as this is doing my head in. I have been battling for weeks with it and i wish i had of known earlier that the card might be faulty so i could have got my money back.
I have a 4gb SDHC card that has been partitioned with an ext2, linux swap, and fat 32 partition that I use in an Android phone. After I partitioned it this way, which I have done more than once with no problems, it quit mounting or being recognized by Android, Linux, or Windows. Windows can tell there is something there but can't mount it, Debian and Android just say it's not there. I need to try to fix the partition table which gparted told me was corrupt the last time gparted could see it.
Code:
# dmesg |grep sdb
[ 7.361926] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[code]...
I'm trying to get some photos off a Canon Powershot SX110IS that uses an SD card (right now there is a Gigaware 4GB one in it) but this computer does not have an SD card input, so I am trying to mount the device through USB. This has worked with a handful of other cameras I've used in the past.
When I connect the camera to the computer and power it on, I get
usb 1-5: USB disconnect, address 7
usb 1-5: new high speed USB device using ehci_hcd and address 8
usb 1-5: New USB device found, idVendor=04a9, idProduct=3192
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Canon Digital Camera
usb 1-5: Manufacturer: Canon Inc.
usb 1-5: SerialNumber: DA9C3D5C2D7F4E3EA806AA70BCDF3E28
So the kernel is at least aware of it. I tried letting thunar mount it, but it complains
thunar-volman: No property info.capabilities on device with
id /org/freedesktop/Hal/devices/usb_device_4a9_3192_DA9C3D5C2D7F4E3EA806AA70BCDF3E28.
I also tried letting dolphin automount it (yuck), but didn't get any messages about it. I checked the fdisk output and there was no ~4GB device, so I'm not sure that I can mount it manually.
Loaded modules:
asus_atk0110
ata_generic
ata_piix
atl1e
button
cdrom .....
Found a raw device for my card when reading through the /proc/partition list but got a "no device" message when mounting the card - mount -t vfat /dev/sda1 /var/card though there is sda in the list.How to know if sda1 exists?
View 1 Replies View RelatedActually i'm doing an ingenior training in SAGEM company, well i'm trying to develop an application which is able ti disturb the IP Network,my idea was is to mount 2 Network Interface Card (NIC) and make a bridge to pass the IP flow and to exploit the firewall Netfilter using iptables command.The application has to import a text file containing a binary array like this one:
0 1 0 : 0 corresponds to iptables -p ip ACCEPT
1 1 1 : 1 corresponds to iptables -p ip DROP
0 0 1
==> So the expected result is to have 5 ip datagrams dropped
My idea was: if 0 --> iptables -A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
if 1 --> iptables -A FORWARD -p ip -m limit --limit-burst 1 -j DROP
The problem was: After executing the application and parsing the text file,
with iptables -L -v: i have
Code:
-A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
-A FORWARD -p ip -m limit --limit-burst 1 -j DROP
-A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
which is logic, but when i sniff with wireshark i find more packets are dropped(6,7 or 8 are dropped), like i had put more DROP rules. and sometimes i found the exact value(usually 5 dropped).
For the last day I haven't been able to automount my USB flash drives! Here's a list of my devices:
Code:
~> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]....