Debian Multimedia :: SD Card In Canon Camera - USB Mount Disconnected
Nov 22, 2010
I'm trying to get some photos off a Canon Powershot SX110IS that uses an SD card (right now there is a Gigaware 4GB one in it) but this computer does not have an SD card input, so I am trying to mount the device through USB. This has worked with a handful of other cameras I've used in the past.
When I connect the camera to the computer and power it on, I get
usb 1-5: USB disconnect, address 7
usb 1-5: new high speed USB device using ehci_hcd and address 8
usb 1-5: New USB device found, idVendor=04a9, idProduct=3192
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Canon Digital Camera
usb 1-5: Manufacturer: Canon Inc.
usb 1-5: SerialNumber: DA9C3D5C2D7F4E3EA806AA70BCDF3E28
So the kernel is at least aware of it. I tried letting thunar mount it, but it complains
thunar-volman: No property info.capabilities on device with
id /org/freedesktop/Hal/devices/usb_device_4a9_3192_DA9C3D5C2D7F4E3EA806AA70BCDF3E28.
I also tried letting dolphin automount it (yuck), but didn't get any messages about it. I checked the fdisk output and there was no ~4GB device, so I'm not sure that I can mount it manually.
Loaded modules:
asus_atk0110
ata_generic
ata_piix
atl1e
button
cdrom .....
View 13 Replies
ADVERTISEMENT
Jan 18, 2011
I'm trying to get photos off my Canon PowerShot SD1100 IS but while Device Notifier pops up telling me I've attached a canon, and I can see it when I run lsusb, It's not actually being mounted anywhere, or creating a device for itself to be mounted with..I plug the camera in to the computer while it's still off, and I turn it off again before disconnecting (As I've heard this is the proper way to do this.) but I am still not getting a device. I've also tried the following advice (Although I'm obviously on openSUSE not Ubuntu).Ubuntu Forums - View Single Post - Unable to mount camera or import digital pictures.
View 9 Replies
View Related
Nov 11, 2010
I am a Ubuntu newbie (installed Ubuntu 10.04 LTS last week) with a camera problem. My Canon SD300 won't automount when I attach it by usb cable. It is visible to F-Spot and I can import pictures, it just doesn't automount. I saw other posts where no usb automounts were occurring. Not my problem. Memory sticks and external hard drives automount just fine. Only the camera is a problem child.
View 1 Replies
View Related
May 10, 2010
I'm currently running 10:04 and I'm looking for some sort of program to read my Canon DVD Camera to get the videos off the DVD's. Even in MS Windows I haven't been able to use it since I lost the included software.
View 2 Replies
View Related
Oct 17, 2010
Canon cameras used to come with a piece of software called remote capture for Windows and MacOS.
You plug in the camera via USB, and then the camera display is on your monitor. From there you can do everything your camera does, like taking pictures of video. Does anyone know if there is linux equivalent software that can do this?
I have found this software, but new cameras aren't supported.
[url]
I'm trying to make a stop motion movie.
View 1 Replies
View Related
Sep 3, 2010
i plug my camera into my laptop and it won't mount the camera's memory, when i plug the memory card directly to the laptop it mounts without problems.
1) a good DIVx/ wmv and DVD movies player?
2) audio/ mp3/ wav player
View 3 Replies
View Related
Jul 20, 2011
I have an Olympus D-560 ZOOM. I used to be able to download pictures from the camera with: SuSE, Fedora, early Ubuntu, etc. (I still can mount and download from my camera on these systems.) I now have Ubuntu 10.04LTS and no longer is my camera recognised. I cannot make sense of the forum threads on this topic, dating back to Ubuntu 8.0-something, that generally ramble on for endless pages without reaching a sensible conclusion (it's a bug, it's not a bug, it's because of gphoto2, it's a gvfs problem, etc.). So maybe there is a definitive answer why my camera that works on other linux will not work on Ubuntu, and maybe by now there is a real fix that does not involve me rebooting my laptop into an old linux distro.
`mount' shows the camera never gets automounted. Manually `mount /dev/sdb1 /media/camera' sometimes hangs and never completes, or sometimes answers immediately `mount: /dev/sdb1 is not a valid block device'. Output in /var/log is below.What's going on, and how can I fix it? I do not use, and I do not want to use, fstop, gphoto, gimp or any other specific software to access my camera (I have tried to download using these anyway and nothing works), I just want to mount the camera as though it were a flash drive in the same manner I have always done. Remember, this does not happen on other distros or early Ubuntu.Here is the relevant output notations in /var/log/messages and /var/log/syslog.
Jul 20 14:34:17 grace kernel: [12402.825779] usb 5-1: new full speed USB device using uhci_hcd and address 11
Jul 20 14:34:18 grace kernel: [12403.013923] usb 5-1: configuration #1 chosen from 1
[code]....
View 9 Replies
View Related
May 12, 2010
I have a Canon Powershot A470 digital camera and can't get to transfer the pictures from it on Ubuntu 10.04. When I had Ubuntu 9.04 I imported pictures from the same camera without any problems. I considered that the problem could be the camera itself or the USB cable, but I have just accessed my pictures from that camera using Windows Vista.
Basically, what I have tried is 1) connecting the USB cable to the camera and the computer; 2) set the command button to the playback position; 3) turn on the camera. Using Windows Vista, this series of procedures opens the camera folder (as a flash drive) on Windows Explorer and this is what used to happen when I was using Ubuntu 9.04. I expected this to happen using the Lucid Lynx, but I didn't get even close. I even opened the Home Folder to see if something new showed up there when I hooked up the camera and turned it on.
Since I'm new with Ubuntu (especially the Lucid Lynx), I don't know what I'm doing wrong. I have read that sometimes we have to mount devices in order to get them to communicate with the computer. Is this one of those cases? If so, how do I do it? Does anyone else have the same model of digital camera? How do you guys transfer the pictures to your Ubuntu-based system?
View 4 Replies
View Related
Aug 14, 2010
From time to time I do a bit of astrophotography and time lapse using a canon 350d. To do it properly I have to use a remote capture program on the laptop. This was never a problem on windows or the mac. Does anyone know of a way to control my camera on ubuntu 10.04 netbook edition?
I have installed gphoto2 and this allows a command line method but I dont like command lines for this kind of stuff, plus id like to see the image straight away. I have tried a couple of GUIs for gphoto but the only one which seems to have a capture option is digikam.... but the button is shaded out so I cant use it.
View 2 Replies
View Related
Jan 1, 2011
I have a Canon S95 digital camera that used to work just fine. I plugged it in, the device notifier showed a couple of actions for it, I chose digiKam and downloaded the photos. Now I tried to get new photos out of the device, but it's not showing in the device notifier any more. DigiKam shows "Canon Inc. Canon Digital Camera (auto-detected)" but doesn't do anything when selecting it.
In dmesg I see:
[ 988.197025] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 988.313730] usb 1-3: New USB device found, idVendor=04a9, idProduct=3212
[ 988.313734] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 988.313738] usb 1-3: Product: Canon Digital Camera
[ 988.313741] usb 1-3: Manufacturer: Canon Inc.
[ 988.313743] usb 1-3: SerialNumber: [number]
So it works but KDE doesn't seem to be able to notice it. I'm using openSuse 11.3 with KDE 4.6 RC1, and it might be that 4.6 betas/rc broke the functionality though I'm not sure.
View 5 Replies
View Related
May 15, 2010
I tryed to download the pics from my canon rebel xti but it doesnt work. I tipe /usr/sbin/lsusb on terminal, and it doen't shows up. Other USB stuff works fine. I tried with digikam, digital camera, and nautilus, and nothing works.
View 4 Replies
View Related
Aug 25, 2010
I did a search and found this link however I remember this being an issue almost two years ago when I installed Debian with a GUI. I have always used it for a server so I never realized this was still an issue until I got my new PC today and went to load Debian / Gnome on it. It showed I was disconnected however I was able to browse the web fine. It appears that so many people have complained about this problem andI am trying to understand if there is a work around and a fix in the near future
View 3 Replies
View Related
Jan 30, 2015
I have a ELRO C903ip.2 camera. I want to use it on zoneminder but am having trouble connecting. I have set a basic account of visitor with username and password both set as visitor.
The question is what is the syntax to the cameras ipaddress via http passing the u/n and p/w at the same time as part of the http string? I have tried the web page: [URL] .... to no avail, i must be missing something pretty obvious but just can't see it for looking.
View 2 Replies
View Related
Aug 4, 2011
I've recently purchased a Lenovo Ideapad z470, and installed Debian Wheezy amd64 on it first thing. I was pleased to find that almost everything worked "out of the box." The only problems were the hotkeys and the card reader. I don't care if the hotkeys ever work, but the non-working card reader is more aggravating than I anticipated. I would be most obliged if anyone could lend a hand.So, first things first, here's the output of uname -a:Linux cerulean 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64 GNU/LinuxHere's the syslog output upon inserting an sd card into reader:
Jul 25 22:19:45 cerulean kernel: [11472.262103] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
Jul 25 22:19:45 cerulean kernel: [11472.354801] usb 1-1.3: New USB device found,
[code]....
View 6 Replies
View Related
Sep 1, 2010
Sony DCS-W55 not working with Shotwell, i had no problem with Canon S80, but Sony gives out USB ptp class camera is there any way to mount USB ptp class camera on Ubuntu.
View 2 Replies
View Related
Jul 11, 2011
I have an old Intel webcam that doubles as a standalone digital camera. When I plug it in, Fedora automatically mounts the memory for the camera as a filesystem.However, because it is old and clunky, if I try to use its webcam functionality after this happens, it crashes internally and nothing ever happens.Even if I unmount the memory, still remains "crashed".I know that if the memory was never accessed, the webcam would work, as this is how it is on Windows, and also how it was in a previous release of Fedora, which didn't automount
View 2 Replies
View Related
Apr 5, 2011
I have a camera in my house and would like to monitor it on my computer under Linux, but I am having problems with Zoneminder.I have a capture card with chip 878A (properly working), but Zoneminder don't show any image or data from the card.I installed Zapping (television program for Gnome) and the camera/card works, presented as device /dev/video0.I followed the steps in the Zoneminder's Wiki, but unsuccessfully.
View 1 Replies
View Related
Dec 14, 2010
I have digital camera (Canon EOS 550d) which I connect to my computer using a USB cable. I can see that the camera file system is mounted under "~/.gvfs/gphoto2-XYZ" where XYZ seems to be a dynamic device dependent string that changes every time I connect the camera.The thing is: I need the mount position ALWAYS to stay the same, so my photo management program (Bibble) knows where to download the images from.I am not sure how to do this, but I guess there must be a way to configure GVFS/FUSE or whatever is responsible for mounting the camera to use a fixed mount point (like /media/camera or something).
View 2 Replies
View Related
Sep 20, 2010
Ubuntu 10.04. In order to get my photo application (digikam 1.2) to download photos off my digital camera/SD card I have had to configure Ubuntu not to 'mount' the usb connected camera when it is plugged into the pc. I can use digikam to download pictures off the camera/SD card into the pc. I'm having a problem when it comes to deleting the original pictures off the sd card/camera. Googling this problem it seems the issue is around Ubuntu only having read access to the SD card. It appears in windows world when an sd card is presented one has read/write access so things tend to 'work out of the box'.
In Linux/Ubuntu world I'm reading that digital cameras/SD cards do not (always?) work out of the box because you only have read access. If I close down digikam and launch nautilus I can see the camera/SD card but cannot write to it - I'm told I only have read access. I have also convinced my father-in-law to switch to Ubuntu but at the moment although he can download photos and view them I see no way of (ideally through digikam) of deleting the pictures off his camera/SD card.
View 9 Replies
View Related
Nov 2, 2010
I have this Lumix G2 camera from Panasonic. Problem is that I cannot put any files on cameras memory card from Ubuntu via usb. I need it to put firmware updates for the camera.
View 1 Replies
View Related
Nov 28, 2010
I've looked all over the internet for an answer to this problem. Maybe I am the only one experiencing it. I am running ubuntu 10.10 and have problems getting pictures from my camera using any photo program (f-spot, picasa, etc). When I plug in the camera, it shows up in "Places" and under "Computer", it even brings up f-spot or whatever I have set to open under media handling in the nautilus preferences, however, when f-spot or picasa open, the camera is listed, but there are no pictures detected. I have removed and re-installed f-spot and picasa with the same results. I believe I even removed the config files for them before re-installing them.
I can open the camera in nautilus and drag them to a folder from the card. If I remove the card from the camera and use a card reader I can import the photos using fspot, picasa or any other photo program. I just cant figure out why f-spot or picasa cant get them from the camera as they have in past verisons. This is not limited to one camera, it happens with a canon and a Nikon. I hope thats not too much info and is not too confusing. The camera(s) show up in lsusb.
View 2 Replies
View Related
May 19, 2011
In short: the files in 11.2 of the memory card from my camera were lower case, and in 11.4 they are upper case. Thus, F-spot uploads all the photos again, and I get two copies of each, one low case (old), another upper case (new), without the comments or rotations that I had made. How can I make the system automount it again in lower case? I knew the proper options to do this manually in fstab, but not via udev or whatever it uses.
[Code]...
View 9 Replies
View Related
Aug 17, 2010
It's never happened to me before, but i seem to have lost some pics when i changed batteries in my camera. is there any pos that they're still on the card and can be salvaged with some GNU/L sw?
View 1 Replies
View Related
Dec 4, 2010
I have a tv tuner card connected to a cctv camera for streaming, all works good in tvtime, cheese used to work but then I changed the resolution to a lower one and now it segfaults, purged reinstalled same issue, also I tried with mplayer, mencoder, mythtv (coludn't find any signal on the input) and camorama.
Code:
mplayer tv:// -tv driver=v4l2:input=1:channel=1:width=768:height=768:device=/dev/video0
And it displays lines through everything but I can see the messed up image, I believe this is due to the current input format being YVU420, I was able in another program to verify this by changing the input codec to yvuv i think it was, how do I change the in mplayer, mencoder, camorama has this bug too, how to change this setting ut codec in mplayer and mencoder, also canorama has this issue, but I can actually see everything, b/w and with lines through it. I am just trying to record video to AVI.
View 3 Replies
View Related
Sep 29, 2010
I have tried putting the SDHC card in before switching on laptop, after, unmounting and remounting several times... on the odd occasion (1/10?) it reads fine, but more often than not, i can see thumbnails of all the images but on opening the file it comes out wrong...either most of the image is a grey block - so can see a tiny bit of sky then its as if it hasn't rendered the whole image...or, the image is striped horizontally, with as if a film negative has been shredded and then misaligned with the colours going wrong...is there an update, something to install to fix this? ETA: - its not the card which works perfect on other laptops and its not the card reader it opens fine in windows 7 on the same computer.
View 10 Replies
View Related
May 4, 2010
My laptop has squeeze and custom 2.6.34-rc5 kernel. This kernel is there from April 20 onwards. Today I am seeing random connect/disconnect of my usb keyboard. In the last 2 hours it got disconnected at least around 10-12 times.
[ 3136.872084] usb 2-1: USB disconnect, address 51
[ 3137.184066] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3137.712085] usb 2-1: new low speed USB device using uhci_hcd and address 52
[ 3137.888161] usb 2-1: New USB device found, idVendor=0603, idProduct=00f2
[ 3137.888172] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3137.888181] usb 2-1: Product: USB Keyboard
[ 3137.888188] usb 2-1: Manufacturer: NOVATEK
[ 3137.907637] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input87
[ 3137.908369] generic-usb 0003:0603:00F2.0050: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 3137.945505] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input88
[ 3137.946956] generic-usb 0003:0603:00F2.0051: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1/input1
View 2 Replies
View Related
Jul 18, 2010
Whenever I disconnect the LAN cable from my Linux box or reset the router the IP doesn't seem to get renewed and so I'm unable to SSH into it or connected to the webservices it is running.When it boots up it gets an IP fine from DHCP on the router but once the system is up and something changes like the router reboots or cable is disconnected, then this is when the problem occurs.sometimes if you go back to the actual Linux box in my loft and open a terminal and runcd /etc/init.d/./networking restartthis will cause it to get a new IP from the DHCP server but this isn't very convinient and a bit haphazard.
View 6 Replies
View Related
Sep 6, 2010
I've been using banshee for a couple weeks. And it's worked great up until now. This happened one other time, and I reinstalled ubuntu, and it worked fine. Now it's not working again. What's happening is, I plug my ipod in, and banshee recognizes it. But when I try to put music onto it, it says it's syncing, and then I disconnect, and the music isn't on there. I updated podsleuth, but that didn't seem to help.
View 1 Replies
View Related
Jul 17, 2011
I was looking to iphone and i was surprised the quality of such tiny camera.
Is there any alternative camera for my laptop to have similar or much better then the one in iphone? So that i can use it from my laptop, but have very sharp HD quality with maximum megapixel + highest frame per second.
View 1 Replies
View Related
Jul 5, 2011
How to enable wifi? I downloaded and installed Debian 6.00 and as I couldn't get online with my Tenda USB Wireless Adapter. I downloaded Debian 6.00 again, this time the CD Net Install version with Firmware included. However, the added firmware version of Debian does not find my wireless either. My wireless adopter is shown as Bus 001 Device 003: ID 148f:3072 Ralink Technology, Corp. RT3072 Wireless Adapter. There is a Network Icon in the Panel which when clicked shows "Create New Wireless Network". I have put in my ISP related network and my password and rebooted, but all I get is the message on my desktop:
"The Network Connection has been disconnected."
That isn't very polite, is it? Who has disconnected it and why remains a mystery to everyone except the culprit(s). I think I must have missed a basic step in the Wifi Enabling process. I checked the Use Permissions and everything is fine there, as User I have permissions to use modems and do networking and so forth. Also I should like to try "modprobe" but I see the package isn't in Synaptic Package Manager.
View 7 Replies
View Related
