I'm on slackware 13.1 using XFCE for my desktop manager. Out of the box, verything is configured to just mount any device by some name the system determine. If the device has no labels, it may just say "160GB" or "SD/MMC".
It was working fine but all of a sudden, my SD card started appearing with "1(LA" in place of something like "SD/MMC". I've tried rebooting, remounting but haven't figured out how to fix this.
I also have had the garbled screen problem when I exit X. I have fresh Slackware 13.1 64 bit install. I have no xorg.config file. The install process installed an xorg.config.vesa instead. Within X, everything is fine. I have the correct screen resolution and all software works great. Within the xorg.config.vesa file my monitor and graphics card have been identified correctly. When the problem first occurred, I experimented by renaming xorg.config.vesa to bad.xorg.config.vesa and using my backed up xorg.config from my previous installation of 13.1, 32 bit version.
When X started, it complained the xorg.config was not found. So, I deleted the xorg.conf, renamed bad.xorg.config.vesa back to it original name and rebooted. Then, everything worked fine except when I exit X I now am put into a huge font - I'd guess somewhere abouts 768x640, or less. It is no longer garbled. If I reboot, text mode comes up as it should with 1048 resolution and the penguin graphic sits on top. Then, X is still fine to work with, and kconsole works fine within X, but when I exit x I am always put back into this graphics free humongous font.
i am using Fedora 12.
i have a 1 GB SD card and a 4 GB SD card.
Using a USB flash reader, when i plug in the 1 GB SD card, dmesg shows
Code:
usb 1-5: new high speed USB device using ehci_hcd and address 11
usb 1-5: New USB device found, idVendor=058f, idProduct=6331
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
[Code]....
(i was suspecting that it could be due to the 4 GB size being too large, but that's very unlikely, since i am able to mount a 16 GB micro SD card - through an Android phone though, not the USB reader.)
I was just given a dell mini 9. Joy a new toy The SSD has failed, so I installed Slackware -current to a 2GiB SD card. Everything is working fine except I'm worried about killing the flash drive due to excessive read-writes. Not being concerned with persistent storage, I've mounted a couple of dir's to ramfs -
[Code]....
I'd love to mount the entire drive as read only. Then certain directories that need written to as ramfs. However this mini 9 only has 512MiB, and I'm affraid I'll quickly run out of space. I am not using swap. ramfs and tmpfs are new concepts to me. I did a little research, but was hoping for some user input on their experiences.
I am trying to get this new install configured.
I searched for a previous thread but didn't really see one.
My image previews are trashed.
How is this repaired?
I'm having with playing some mp3 files. When using Totem or Rhythmbox, after some time (it may be 10 seconds or a couple of minutes), the sound gets garbled, sped up by approximately 5% and in higher pitch. If I exit the player and play the file again, the problem is gone (until it comes again, not much time from that). That affects audio from some video files. Also, there is a quick scratchy noise at the very beginning of playback, as well as with sound preview on mouseover in Nautilus.
Other players don't have that issue (SMPlayer, mpg123...) My PCM volume is not 100% and setting it to lower values doesn't work. The problems are more noticeable if I do something that uses hard disk (installing software, for example.) They weren't present in 9.04 nor 9.10.
I've recently purchased a Lenovo Ideapad z470, and installed Debian Wheezy amd64 on it first thing. I was pleased to find that almost everything worked "out of the box." The only problems were the hotkeys and the card reader. I don't care if the hotkeys ever work, but the non-working card reader is more aggravating than I anticipated. I would be most obliged if anyone could lend a hand.So, first things first, here's the output of uname -a:Linux cerulean 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64 GNU/LinuxHere's the syslog output upon inserting an sd card into reader:
Jul 25 22:19:45 cerulean kernel: [11472.262103] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
Jul 25 22:19:45 cerulean kernel: [11472.354801] usb 1-1.3: New USB device found,
[code]....
I've got an Olympus 256MB xD picture card that I would like to have mounted on my SuSE. In windows, a few seconds after putting it into the slot on my Toshiba laptop, it is mounted as a drive. In my OpenSuSE 11.3 (KDE 4.4.4), nothing happens. Is there some software that I can get or some setting I have to tweak in order for it to be mounted?
View 1 Replies View RelatedI just installed the LXDE on minimal (netinstall) Lenny. On Iceweasel and chrome Korean email comes out garbled and unreadable.
View 2 Replies View RelatedI had received ununtu HH CD, which I loaded few times in few machine without problem (CD is ok). But in a perticular machine ubuntu HH, makes the screen garbled during installation and after installation at login prompt, but screen is just OK before the login prompt. This is happening in one machine and when i tried to load ubuntu 9 and fedora core in this machine, all goes fine (installation and use) means machine is reasonably ok. As I load edubuntu on HH, hence this ubuntu loading is important for me.
View 1 Replies View Relatedi moved a computer from a house into another which has a printer, i hooked it all including the printer(through USB) it seems whenever i turn on the computer, just getting to the grub menu, the printer prints 3 pages with garbled messages things in | are me explaining the sysmbol
page 1
USBC RUT
page 2
[code]....
I am trying to use screen captures in compiz but they are garbled and unusable. I am running ubuntu 9.10 on a dell latitude D520. I attached a copy of one of the screen shots.
View 1 Replies View RelatedThe clock applet and indicator applet in Gnome garble up from time to time. I have 2 Ubuntu installations at home and several others at work, some 32-bit and some 64-bit, all exhibiting the same issue occasionally. I think it's a bug in the Gnome panel. In the attached screenshot you can see an example of how the time in the clock applet is garbled up.
It's not always the clock that is affected, some other times it's the login name, the weather, or the shutdown button... Worst case, the shutdown button becomes totally invisible preventing me to log off (workaround: use the three-fingered salute).
my ubuntu with flash 10.2 oftentimes gives my a garbled text and images on websites here and there this is what happens on this tv website [URL] it happens on many other websites, this is just an example Kernel 2.6.38-2 running on 64bit ubuntu 10.10
View 2 Replies View RelatedI run slackware 13.0 with firefox 3.5.2. The sound works great for the most part. But sometimes after the browser has been open for more than a few hours, and after a few hulu and ..... visits, I start up another movie and the sound is all jarbled and echoy. So I just 'pkill firefox' Run firefox and restore the sessions and everything is back to normal. Seems like it's just a firefox bug.
View 2 Replies View RelatedMy SD card is recognised by OS 11.3 if it is inserted at boot up. If I remove it and reinsert it, the devise monitor states 'no devices plugged in'. This is a problem that I have also had (and reported in these forums) with 11.0, 11.1, 11.2.Now I notice that there is a section for 'removable devices' in the system configuration. But even if I click the box 'enable automatic mounting of removable media' and the sub-box 'automatically mount removable media when attached' the SD card is not remounted, there remain 'no devices plugged in'.
View 9 Replies View RelatedI bought a micro sd card for my BB 9000 and having a lot of trouble with it. windows as it just doesn't work or maybe it is that the card i bought is faulty? Probably too late to get my money back from paypal now :0(. I did this
$ lsusb
Bus 002 Device 006: ID 0e8f:0021 GreenAsia Inc.
Bus 002 Device 005: ID 17a0:0001
Bus 002 Device 004: ID 04a9:2207 Canon, Inc. CanoScan 1220U
[Code]....
while the BB was connected. And you will see byt the attached pic that the sd card is not mounting. I can't see where the card is now. The file manager did list it but can't remember where. With all the other drives(i have 2 hard drives) but now i can't see it. There is some confusion as to wether the music that the BB software i used via windows put the music on the BB device or the card. Different things say different things. The filemanager on the BB suggests the files are on the card but when i go to add more files i get an error saying the device is full. The device can only hold 1gb of files including installed apps. I probably haven't mentioned everything here as this is doing my head in. I have been battling for weeks with it and i wish i had of known earlier that the card might be faulty so i could have got my money back.
I have a 4gb SDHC card that has been partitioned with an ext2, linux swap, and fat 32 partition that I use in an Android phone. After I partitioned it this way, which I have done more than once with no problems, it quit mounting or being recognized by Android, Linux, or Windows. Windows can tell there is something there but can't mount it, Debian and Android just say it's not there. I need to try to fix the partition table which gparted told me was corrupt the last time gparted could see it.
Code:
# dmesg |grep sdb
[ 7.361926] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[code]...
After applying the latest round of updates last night, I turned on my laptop this AM (ATI X1300 Mobility graphics running the default drivers), selected the latest kernel in GRUB, and waited to log in....only problem is that instead of seeing a normal loading screen (Blue with Fedora icon filling in), I instead get a black screen mostly covered in multicolored rectangles. I don't believe there was a graphics driver update, so I'm rather confused as to what went wrong/how to procede. I can still boot using a previous kernel.
View 1 Replies View RelatedI am running OpenSuse 11.2 64 - I have vmware Player and Vbox loaded and working fine - I have XP running in each VM - I have a Creative Live cam and was accessing it in each of the VM's, because I can't access it in Suse. This worked very well until recently. I received updates for Suse, one of which was a kernel update - I installed and rebooted. All of a sudden my time to boot took for ever - however - once up and running every thing seemed fine. After a few boots the system started booting normally and the video from my live cam in both VM's is garbled and and essentially not working right.
Video seems to work correctly in all other areas - I removed the creative software and reinstalled in each of my VM's No change. One last thing - I recently (a week or so before my problems) installed an Nvidia video card. I previously used on board video (also Nvidia) I had no problems either in the VM's or Suse until the kernel update. I have removed Vbox and reloaded and set it up (/etc/init.d/vboxdrv setup) problem still there.
My OS is:Linux 2.6.31.12-0.2-desktop x86_64
New Video is: G96[GeForce 9500 GT] Driver - nvidia
Whenever I log in, the upper right hand corner is garbled, and there are small white rectangles. If I log out and log back in, the problem is fixed. Could someone please help me fix this?
View 4 Replies View RelatedI used Ubuntu 9 (Karmic Koala) for some time with no problems. When I upgraded to Ubuntu 10 (Lucid Lynx) I ran into graphics issues.After I log in, the screen scrambles (a purple/green mess)--impossible to decipher anything, although I can get out by marking the spot on the screen to click for a restart, so Linux is working behind the scenes.If I start in recovery mode with basic graphics, I have no problems at all (other than limited functionality). If I start the old 2.6.31-22 kernel, I see a bunch of "unmountable" errors in the startup script, but I can use Linux normally with no apparent problems. I'm running an IBM ThinkPad A30 with ATI Mobility graphics. Just to reiterate, the screen looks fine until I log in, at which point it goes bonkers. I've tried lowering the resolution, to no avail. I'm not running any proprietary drivers. What do I need to change in order to fix this?
View 2 Replies View RelatedSo this also happened to me when trying to install an old version of Ubuntu (hardy I believe). I have a Sun Netra X1 that I am trying to install the latest stable Debian Sparc64 port on. I'm doing a TFTP boot, and am able to get the kernel to load. However, once the kernel loads the installer, the screen gets garbled (attached is a screenshot from my console session) This server has no graphics card, so I have to install using the serial console. I don't recall having this issue when I installed the last stable version. Any ideas what's going on or how to fix it? I even passed the option "DEBIAN_FRONTEND=text" to the kernel, but it didn't seem to do anything.
View 2 Replies View RelatedI've noticed in the past week or so that any time I print something from Firefox I wind up with a pile of paper that has either nothing on it, is a mess of graphics characters, or a combination of the two. No other applications seem to have problems printing. I can successfully print from gedit, OOWriter, OOCalc, as well as other browsers (well, I'm not 100% certain of Opera yet). Output from LaTeX/dvips and even an old handcrafted PostScript file can be printed correctly with "lpr". I've tried printing to a file from all the browsers on my system and they all produce output viewable with "gv" except Firefox. So... I suspect that something's gotten horribly misconfigured in my FF settings.
Q: What does one do to go back to FF defaults without blowing away the entire browser configuration? I'm not keen on losing all the browser settings if I can possibly avoid it. Especially bookmarks and stored passwords (though those could be written down, I guess, and re-saved). This problem started with FF 3.5.4 (if memory serves) that I had gotten from OpenSUSE's download site. Today I uninstalled that and grabbed a copy of the 3.6.3 tar archive and installed that. It didn't help so I suspect it's a configuration problem that 3.6.3 has inherited from the old settings.
One thing I will try as soon as I can is to login into the system as a different user and see if that account is able to print correctly from FF. I will post the results as soon as I attempt that. I was looking around in the "about:config" page and noticed that there are definitions for ancient print queues that no longer exist on our network. I can see no way to remove these. Is there a way to remove these unneeded configuration settings?
I'm trying to get some photos off a Canon Powershot SX110IS that uses an SD card (right now there is a Gigaware 4GB one in it) but this computer does not have an SD card input, so I am trying to mount the device through USB. This has worked with a handful of other cameras I've used in the past.
When I connect the camera to the computer and power it on, I get
usb 1-5: USB disconnect, address 7
usb 1-5: new high speed USB device using ehci_hcd and address 8
usb 1-5: New USB device found, idVendor=04a9, idProduct=3192
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Canon Digital Camera
usb 1-5: Manufacturer: Canon Inc.
usb 1-5: SerialNumber: DA9C3D5C2D7F4E3EA806AA70BCDF3E28
So the kernel is at least aware of it. I tried letting thunar mount it, but it complains
thunar-volman: No property info.capabilities on device with
id /org/freedesktop/Hal/devices/usb_device_4a9_3192_DA9C3D5C2D7F4E3EA806AA70BCDF3E28.
I also tried letting dolphin automount it (yuck), but didn't get any messages about it. I checked the fdisk output and there was no ~4GB device, so I'm not sure that I can mount it manually.
Loaded modules:
asus_atk0110
ata_generic
ata_piix
atl1e
button
cdrom .....
I have a build-in card-reader in my notebook. When I insert a sd-card the card is mounted but as soon as I start copying the files to the harddrive, the sd-card will unmount and than mount again. Every time I start copying I have the unmount followed by a new mount. I tried with different sd-cards and I have the same problem. Card reader works fine on windows. But now I don't have windows anymore on this notebook so I need to use the card-reader on opensuse.
View 9 Replies View RelatedFound a raw device for my card when reading through the /proc/partition list but got a "no device" message when mounting the card - mount -t vfat /dev/sda1 /var/card though there is sda in the list.How to know if sda1 exists?
View 1 Replies View RelatedActually i'm doing an ingenior training in SAGEM company, well i'm trying to develop an application which is able ti disturb the IP Network,my idea was is to mount 2 Network Interface Card (NIC) and make a bridge to pass the IP flow and to exploit the firewall Netfilter using iptables command.The application has to import a text file containing a binary array like this one:
0 1 0 : 0 corresponds to iptables -p ip ACCEPT
1 1 1 : 1 corresponds to iptables -p ip DROP
0 0 1
==> So the expected result is to have 5 ip datagrams dropped
My idea was: if 0 --> iptables -A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
if 1 --> iptables -A FORWARD -p ip -m limit --limit-burst 1 -j DROP
The problem was: After executing the application and parsing the text file,
with iptables -L -v: i have
Code:
-A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
-A FORWARD -p ip -m limit --limit-burst 1 -j DROP
-A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
which is logic, but when i sniff with wireshark i find more packets are dropped(6,7 or 8 are dropped), like i had put more DROP rules. and sometimes i found the exact value(usually 5 dropped).
I print something with cups-pdf. The pdf appears, it LOOKS as it should, BUT if i actually select text from the pdf viewer and try to paste it somewhere, i get messed up characters (sometimes no characters). So this means that searching too is out of the question i guess.
Why is this happening? I dont know if its a ghostscript issue because on Windows there are several gs based pdf printers and those create perfectly searchable pdfs. Is this a cups/cups-pdf specific issue?
PS Printing through the "Print to file" dialog creates good pdfs but i dont know how to replicate that via command line.
I just switched from xp on a HP s7613w (gforce 6150 le) to ubuntu 9-10. I can not see anything over 800x600 to select unless i enable the nvida drivers. There are three choices and i have tried them all, After i activate them it will let me select the 1024x768 that i need but the screen is garbled. There will be garbled text till i run the curser over the text then it will stratin up. The buttons on a page will move down and to the right a little bit when i put the cursor over them. When i uninstall the nvida drivers everything goes back to 800x600 and the screen is fine. My monitor is a Sceptre X20 is that helps. I am new to linux so please use easy to follow instructions if you can help me. I tried pc linux and it did the same thing. I like this version better so i am going to try to get it to work.
View 7 Replies View Related
