Hardware :: Mount 1 GB SD Card But Not 4 GB SD Card?
Feb 24, 2010
i am using Fedora 12.
i have a 1 GB SD card and a 4 GB SD card.
Using a USB flash reader, when i plug in the 1 GB SD card, dmesg shows
Code:
usb 1-5: new high speed USB device using ehci_hcd and address 11
usb 1-5: New USB device found, idVendor=058f, idProduct=6331
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
[Code]....
(i was suspecting that it could be due to the 4 GB size being too large, but that's very unlikely, since i am able to mount a 16 GB micro SD card - through an Android phone though, not the USB reader.)
View 1 Replies
ADVERTISEMENT
Mar 9, 2011
I'm on slackware 13.1 using XFCE for my desktop manager. Out of the box, verything is configured to just mount any device by some name the system determine. If the device has no labels, it may just say "160GB" or "SD/MMC".
It was working fine but all of a sudden, my SD card started appearing with "1(LA" in place of something like "SD/MMC". I've tried rebooting, remounting but haven't figured out how to fix this.
View 5 Replies
View Related
Mar 31, 2011
How can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .
View 5 Replies
View Related
Sep 5, 2011
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
View 3 Replies
View Related
Dec 6, 2009
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
View 9 Replies
View Related
Jul 15, 2010
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
View 6 Replies
View Related
Aug 21, 2010
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies
View Related
Jan 23, 2011
I recently installed a startech PCI usb expansion card...All went well and all external devices connected show up without a hitch. However a day ago The card/devices just STOPPED. I rebooted and no avail. Rebooted a second time got a IRQ 19 failure error. Then on a third try It showed up and worked fine... This has happened twice. Here's my IRQ print after running cat /proc/interrupts
CPU0 CPU1
0: 132 3 IO-APIC-edge timer
1: 0 146 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
I am assuming that the second to the last entry is the pci usb card. Is there a way to home in more deriectly to find and troubleshot the problem and see if its module or IRQ?
View 1 Replies
View Related
Jun 15, 2010
I recently installed Xubuntu on my old P3 laptop (Compaq Armada E500 if anyone is familiar). The laptop is a bit old, so both wired and wireless networking is done via PCMCIA cards. I have 2 cards installed, one for each purpose. I can't find the dongle for the wired card right now, so I am trying to use the wireless card. I am able to find the network I want to connect to, and type in the password since the network is secured. It tries to connect but then pops up again asking for the password (I know it is correct). Is this card supported by linux/compatible? I tried finding drivers online but the sites that had drivers were down.
View 1 Replies
View Related
Jan 20, 2010
Looking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?
View 5 Replies
View Related
Mar 30, 2009
very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies
View Related
Jul 21, 2010
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
View 2 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Aug 4, 2011
I've recently purchased a Lenovo Ideapad z470, and installed Debian Wheezy amd64 on it first thing. I was pleased to find that almost everything worked "out of the box." The only problems were the hotkeys and the card reader. I don't care if the hotkeys ever work, but the non-working card reader is more aggravating than I anticipated. I would be most obliged if anyone could lend a hand.So, first things first, here's the output of uname -a:Linux cerulean 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64 GNU/LinuxHere's the syslog output upon inserting an sd card into reader:
Jul 25 22:19:45 cerulean kernel: [11472.262103] usb 1-1.3: new high speed USB device number 4 using ehci_hcd
Jul 25 22:19:45 cerulean kernel: [11472.354801] usb 1-1.3: New USB device found,
[code]....
View 6 Replies
View Related
Sep 19, 2010
I've got an Olympus 256MB xD picture card that I would like to have mounted on my SuSE. In windows, a few seconds after putting it into the slot on my Toshiba laptop, it is mounted as a drive. In my OpenSuSE 11.3 (KDE 4.4.4), nothing happens. Is there some software that I can get or some setting I have to tweak in order for it to be mounted?
View 1 Replies
View Related
Sep 16, 2010
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies
View Related
Jun 15, 2010
If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
View 4 Replies
View Related
Jul 17, 2010
My SD card is recognised by OS 11.3 if it is inserted at boot up. If I remove it and reinsert it, the devise monitor states 'no devices plugged in'. This is a problem that I have also had (and reported in these forums) with 11.0, 11.1, 11.2.Now I notice that there is a section for 'removable devices' in the system configuration. But even if I click the box 'enable automatic mounting of removable media' and the sub-box 'automatically mount removable media when attached' the SD card is not remounted, there remain 'no devices plugged in'.
View 9 Replies
View Related
May 28, 2011
I bought a micro sd card for my BB 9000 and having a lot of trouble with it. windows as it just doesn't work or maybe it is that the card i bought is faulty? Probably too late to get my money back from paypal now :0(. I did this
$ lsusb
Bus 002 Device 006: ID 0e8f:0021 GreenAsia Inc.
Bus 002 Device 005: ID 17a0:0001
Bus 002 Device 004: ID 04a9:2207 Canon, Inc. CanoScan 1220U
[Code]....
while the BB was connected. And you will see byt the attached pic that the sd card is not mounting. I can't see where the card is now. The file manager did list it but can't remember where. With all the other drives(i have 2 hard drives) but now i can't see it. There is some confusion as to wether the music that the BB software i used via windows put the music on the BB device or the card. Different things say different things. The filemanager on the BB suggests the files are on the card but when i go to add more files i get an error saying the device is full. The device can only hold 1gb of files including installed apps. I probably haven't mentioned everything here as this is doing my head in. I have been battling for weeks with it and i wish i had of known earlier that the card might be faulty so i could have got my money back.
View 2 Replies
View Related
Dec 2, 2010
I have a 4gb SDHC card that has been partitioned with an ext2, linux swap, and fat 32 partition that I use in an Android phone. After I partitioned it this way, which I have done more than once with no problems, it quit mounting or being recognized by Android, Linux, or Windows. Windows can tell there is something there but can't mount it, Debian and Android just say it's not there. I need to try to fix the partition table which gparted told me was corrupt the last time gparted could see it.
Code:
# dmesg |grep sdb
[ 7.361926] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[code]...
View 4 Replies
View Related
Dec 30, 2009
My soundcard (a Creative X-Fi Xtreme Music) is running with the unix-driver offered by Creative. But after a restart (without switching power off) I have to switch the sound device in xmms from ALSA to OSS. Also my tv card (an hybrid card from Hauppauge, WIN-TV HVR-1300) is only getting a signal after a restart, before there is no signal found. To get sound while watching tv I'm using one of the following lines, it seems to be random wich of them is working without error:
> sox -r 48000 -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
> sox -r 48000 -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp1
So it looks like a problem in loading the modules in correct order, but I'm not sure. Perhaps there is also a problem with my nvidia graphic card (see list below for the kind of card), that I have installed with the unix-drivers from nvidia's webpage. To solve this problem I'm now searching since september, when I got my new computer, including:
-graphics: Lead896 D3 X GTX260 Extreme+
-CPU: Intel Core2Duo E8500, 3166 MHz, FSB 775
-mainboard: Asus P5Q-E, P45 F G SA
[code].....
View 14 Replies
View Related
Dec 17, 2010
I am wondering if it would be possible to format an 8g SDHC card in a way that it will be able to be written to and read by an SD reader?
Reading about SDHC vs SD suggests that the only difference is the block/cluster/byte configurations. Is that true?
Could I format the 8g FAT32 SDHC with gparted to a 1g FAT16 partition with the rest of the space left un-formatted so an SD reader could handle it?
View 2 Replies
View Related
Mar 6, 2011
Recently I had to replace my Hauppauge HVR-1600 (it was doing everything I wanted it to do but after a few years burned out) and decided to get the HVR-2250. Before purchasing I checked the forums and noticed that there was quite a bit of support and most everyone managed to get it working so I thought it would be a good idea.
The problem I have now is that, though lspci shows the card as Multimedia controller: Philips Semiconductors Device 7164 (rev 81); however, when trying to setup mythtv-backend, the card does not show up under the "capture card" section. After a few hours of research, I came across this thread and it seemed to be general consensus that the method worked so I tried it. Still no luck.I ended up formatting, fresh install of Ubuntu 10.10 and then installed MythTV and still nothing. Not really sure where to go from here.
View 9 Replies
View Related
Feb 17, 2011
I have just purchased a HTPC - cheap purchase pre-built from ebay - ideal size - small box - not too out of place in the lounge.The HTPC has one rj45 connection built on to the mobo, with a wireless card + aerial in the back (wireless broadband) and I am going to take the dtv card out and replace it with anothe rj45 card.I intend to run ubuntu server 10.10 on the server and I intend to connect my sky broadband through the server to give me the security of a server based firewall and the security of the server as a whole.
View 5 Replies
View Related
Nov 22, 2010
I'm trying to get some photos off a Canon Powershot SX110IS that uses an SD card (right now there is a Gigaware 4GB one in it) but this computer does not have an SD card input, so I am trying to mount the device through USB. This has worked with a handful of other cameras I've used in the past.
When I connect the camera to the computer and power it on, I get
usb 1-5: USB disconnect, address 7
usb 1-5: new high speed USB device using ehci_hcd and address 8
usb 1-5: New USB device found, idVendor=04a9, idProduct=3192
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Canon Digital Camera
usb 1-5: Manufacturer: Canon Inc.
usb 1-5: SerialNumber: DA9C3D5C2D7F4E3EA806AA70BCDF3E28
So the kernel is at least aware of it. I tried letting thunar mount it, but it complains
thunar-volman: No property info.capabilities on device with
id /org/freedesktop/Hal/devices/usb_device_4a9_3192_DA9C3D5C2D7F4E3EA806AA70BCDF3E28.
I also tried letting dolphin automount it (yuck), but didn't get any messages about it. I checked the fdisk output and there was no ~4GB device, so I'm not sure that I can mount it manually.
Loaded modules:
asus_atk0110
ata_generic
ata_piix
atl1e
button
cdrom .....
View 13 Replies
View Related
Aug 13, 2011
I have a build-in card-reader in my notebook. When I insert a sd-card the card is mounted but as soon as I start copying the files to the harddrive, the sd-card will unmount and than mount again. Every time I start copying I have the unmount followed by a new mount. I tried with different sd-cards and I have the same problem. Card reader works fine on windows. But now I don't have windows anymore on this notebook so I need to use the card-reader on opensuse.
View 9 Replies
View Related
Jun 23, 2010
Found a raw device for my card when reading through the /proc/partition list but got a "no device" message when mounting the card - mount -t vfat /dev/sda1 /var/card though there is sda in the list.How to know if sda1 exists?
View 1 Replies
View Related
Apr 1, 2010
Actually i'm doing an ingenior training in SAGEM company, well i'm trying to develop an application which is able ti disturb the IP Network,my idea was is to mount 2 Network Interface Card (NIC) and make a bridge to pass the IP flow and to exploit the firewall Netfilter using iptables command.The application has to import a text file containing a binary array like this one:
0 1 0 : 0 corresponds to iptables -p ip ACCEPT
1 1 1 : 1 corresponds to iptables -p ip DROP
0 0 1
==> So the expected result is to have 5 ip datagrams dropped
My idea was: if 0 --> iptables -A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
if 1 --> iptables -A FORWARD -p ip -m limit --limit-burst 1 -j DROP
The problem was: After executing the application and parsing the text file,
with iptables -L -v: i have
Code:
-A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
-A FORWARD -p ip -m limit --limit-burst 1 -j DROP
-A FORWARD -p ip -m limit --limit-burst 1 -j ACCEPT
which is logic, but when i sniff with wireshark i find more packets are dropped(6,7 or 8 are dropped), like i had put more DROP rules. and sometimes i found the exact value(usually 5 dropped).
View 1 Replies
View Related
Mar 5, 2010
How to get Device ID CF Card or all information about CF card?
Info: I use USB card reader to connected CF card
View 3 Replies
View Related
Jun 12, 2011
I have opensuse 11.3 installed, and my motherboard has the intel i845 chipset,
one day windows had enough of the intel graphics chip and would not let me have anything but 640x480 pixels, well you cant do much with that so I put an ati card in and disabled the intenal graphics. windows was happy enough but suse could not boot - more specifically could not mount the root filesystem, saying it had errors (did a very quick fsck), could not find the journal, and I had a bad superblock. the "failsafe kernel" was no better. If I take the ati card out suse boots fine. however I do swap frequently between windows and linux and changing graphics cards between boots is somewhat irritating.
View 3 Replies
View Related
