It seems I cannot mount and unmount a USB Drive, it gives me the following error:
Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/DAVE-1
I have changed FSTAB, and now it looks like this:
proc/procprocdefaults00
sysfs/syssysfsnoauto00
usbfs /proc/bus/usb usbfs auto,user 00
devpts/dev/ptsdevptsmode=0620,gid=500
code....
I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
First of all: it's been more than 12 years ago since I worked with Linux, and a lot has changed in the meantime. But I considered it a challenge to install Ubuntu 9.10 and lateron upgraded to 10.04 LTS without any troubles, until now:
Except my main partition ("/") all other partitions fail to mount. All NTFS partitions from my other OS and also 2 other linux ext4 partitions I've made are not accessible anymore. and, what bothers me the most: I deleted those 2 new linux partitions in the meantime because I couldn't access them initially because Root was the owner (Duh! root is standard disabled in Ubuntu, right?). After an attempt to try to automount all partitions following the help guides I got now big grey errors on my splashscreen while booting, telling that an error occured with e.g. /media/Backup because it is missing or it cannot be mounted, with 3 options below: waiting, skipping or using a command prompt to solve this. I always choose Skip for safety.
Now if I want to see the content of all my other partitions I got a popup telling me unable to mount e.g. /media/Downloads and the message included:
[Code]....
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
I get the following message when trying to access my 1tb usb drive "Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sdr1': Permission denied Failed to mount '/dev/sdr1': Permission denied Please check '/dev/sdr1' and the ntfs-3g binary permissions, and the mounting user ID.More explanation is provided at [URL].. Really wierd thing is Linux Mint Debian reads it just fine
View 1 Replies View RelatedI have been running a live version on a 8 gig stick. Played nice for a couple of months but now when I try to access the native ntfs file system, I get the following error message.... Error mounting: mount exited with exit code 21: mount: according to mtab, /dev/sda6 is already mounted on /media/c
View 1 Replies View RelatedMy computer has been acting quite strange lately. It's been taking longer to boot, and my sound doesn't play anymore (Only a high pitched sound is heard, and no hardware for sound is detected). Just recently, my Windows 7 Partition returned the error of Disk Error Occured. Press CTRL+ALT+DEL to restart.
Any way I can fix my whole issue, I think my desktop is starting to die on me :O (And its only about 7 months old T_T)
my windows xp system has recently been messed up, everytime i boot, i see the windows logo and then it reboots so i decided to liveboot ubuntu in order to recover the important files on my hard drive and then reboot. Problem is when i try to click on my "500GB Filesystem" I get this message.Unable to mount 500GB FilesystemError mounting: mount exited with code 13:ntfs_attr_pread_i:ntfs_pread failed:/input/output error Failed to read NTFS $Bitmap:Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk/f on Windows then reboot into Windows twice.The usage of the /f parameter is very important! If the device is SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/directory(e.g./dev/mapper/nividia_eahaabcc1). Please see the 'dmraid' documentationfor more details
View 1 Replies View Relatedusing 'ntfs-config' to make ntfs partitions mount on bootup so that I can access my data partition from Ubuntu. The first time I installed ntfs-config it would not run. I uninstalled and reinstalled it and then it ran, but it didn't seem to be responding very well. I attempted to tick the partition I wanted and set it to be writeable. After I closed the app ALL my ntfs partitions were mounted, even the windows and system reserved partitions, and when I attempted to unmount them I got the following error:
Unable to unmount Data
Error unmounting: unmount exited with exit code 1:
helper failed with
unmount /dev/mapper/isw_dfjjdefcdi_RAID5p4 is not mounted (according to mtab)
I tried rebooting. I tried uninstalling ntfs-config, then reinstalling it (now it wont run again). So I'm at a loss as to what to do. I simply want my data partition mounted on boot up and writable, not the others.
Accidentally the usb plug on my WD "My Book" got halfway unplugged and I didn't notice it. when I rebooted it, it wouldn't read the drive. I tried using G Parted to repair it but no success, it just runs forever accessing the drive and never finishes. (I left it running an entire weekend and it didn't finish) the drive is formated ext3.
When I try to mount the drive in Ubuntu 9.10 it gives this error message:
Strangely if I boot into Windows and use the ext driver I can access the drive just fine. is this something I can fix? if needed I can use Windows to do any repairs.
I slipped on my expansion drive cable and it disconnected quickly, when I reconnected I got this error: Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
View 1 Replies View RelatedI am a beginner in ubuntu and only recently did i install Ubuntu 10.10 using Wubi. I am dual booting along with Windows 7 64bit. Before I got to know of Wubi, I created a free 20GB partition for installing linux. But since it was of no use, I decided to extend another partition adding this 20GB space. The problem now is that I am getting the following error while trying to access the partition.
"Error mounting: mount exited with exit code 12: Failed to read last sector (605949951): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
or the partition table is corrupt (partition is smaller than NTFS),
or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sda5': Invalid argument
The device '/dev/sda5' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?"
These are the results after running sudo fdisk -l /dev/sda:
"Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x76c4009c
Device Boot Start End Blocks Id System
/dev/sda1 1 1 992+ 42 SFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 1 13 102400 42 SFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13 6528 52326400 42 SFS
Partition 3 does not end on cylinder boundary.
/dev/sda4 6528 42717 290694144 42 SFS
Today I was trying to make a LiveUSB for Fedora 15 with UNetbootin and when I inserted my USB stick, it blinked and then this error appeared:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
I have a build-in card-reader in my notebook. When I insert a sd-card the card is mounted but as soon as I start copying the files to the harddrive, the sd-card will unmount and than mount again. Every time I start copying I have the unmount followed by a new mount. I tried with different sd-cards and I have the same problem. Card reader works fine on windows. But now I don't have windows anymore on this notebook so I need to use the card-reader on opensuse.
View 9 Replies View Relatedwhen i want copy something from dvd my debian squeeze is total slow cpu ussage is 100% and write 2.2 mb/s and musick is stop and play. This same is on burning cd /dvd the device buffer is an about 10-15% this dvd is Pionier 116D on windows xp work perfect. I try benchmark dvd form gnome-disk-utility but i got Error benchmarking: helper exited with exit code 1: Device /dev/sr0 is too slow to benchmark
[Code]....
( everything works on debian lenny on the old kernel 2.6.26 ) I instaling a few kernel and compiling 2.6.35.7 with .config file form ubuntu on finaly didn't help
I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies View Relatedi'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
View 4 Replies View Relatedi have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur."mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host"
View 1 Replies View RelatedI have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
My system has stopped to boot at all...
Code: Select alldone.
Setting parameters of disc: (none).
Setting preliminary keymap...done.
Activating swap...done.
Checking root file system...fsck from util-linux-ng 2.17.2
[Code] ....
An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed, then the system restarted. The fsck should be performed in maintenance mode with the root filesystem mounted in read-only mode. ... failed!
The root filesystem is currently mounted in read-only mode. A maintenance shell will now be started. After performing system maintenance, press CONTROL-D to terminate the maintenance shell and restart the system. ... (warning).
Give root password for maintenance
(or type Control-D to continue): _
For now, I just don't know what I should to do next to my system has started to work again...
i am trying to install ubuntu from an SD card, i can run it from the card, and everything works fine, all but the install. i get to step 3 of 6. when pressing forward i get an error message ubiquity.components.partman failed exit code 141
View 1 Replies View RelatedI am re-installing Ubuntu onto my desktop PC which has Windows 7, openSUSE 11.2 and Fedora Core 12. First I tried Ubuntu 9.10. Near the end of the installation the machine reboots and the monitor shows the following message:
"Ubiquity.components.partman failed - Exit code 10. Further info in /var/log/syslog"
Tried again with Ubuntu 10.04 beta2 with same problem.
How can I view and read /var/log/syslog if Ubuntu fails to be installed and therefore I cannot access this log?
I'm in the process of building a new Fedora machine. I use the machine for a VMWare server, the file server for the house as well as a Linux desktop for work.My current machine has a single 1.5GB hard drive. The new machine will have a mirrored RAID drive(2TB). I'm also contemplating using a smaller 250GB drive for the OS installation. I would then divide up the 2TB drive into /home and /var/lib/vmware partitions where the bulk of the data would reside.The goal is to be able to unmount the /home and /var/lib/vmware partitions when I need to upgrade the OS version with the data intact and remount them once the new install is complete.
The goal is to keep the family network file shares and my Virtual machines intact while reinstalling the new Fedora OS from scratch. In theory it should work. I just want to mak an (in)sanity check to ensure it will work in practice.
When I insert an SD card in the reader, slackware creates a mount point and mounts my card volumes. On unmounting the volumes, the mount point vanishes. How do I achieve this manually?When I attempt to mount a volume using the mount command, the mount point folder must exist and the folder does not vanish on umount. Is there a way to create a mount point if it does not exist? and ensure that the folders vanish on umounting?
View 2 Replies View RelatedI am unable to mount partition in ubuntu 10.04. Icons for different partitions are not coming within "Places". Every time I have to manually mount the partition or CD or DVD and manually unmount it. Seldom it shows the partition icons within Places>Computer. Then the partitions are getting mounted upon double clicking its partition-icon. But I fail to unmount the partition as it throws the error "media/partition_name is not in the fstab (and you are not root)."
View 9 Replies View Relatedi use Ntfs 3g for auto mounting my windows partition. but for some reason i want to get it unmounted on boot.but when i get into the NTFS config tool i cant figure that out.
View 2 Replies View Relatedim trying to get a network setup i followed the instruction via gentoo wiki samba what i have done
[Code]...
then i did chmod 777 to the shared folders on both machines went into nautilus it sees the folder but it will not mount the folder showing the error msg:"unable to mount location failed to mount windows share" ive been searching unbuntu forums opensuseforums and google for an answer to this issue but as of right now anything that i have tried to do has failed and nothing seems to be working.
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View Related