OpenSUSE Hardware :: How To Add ESATA Disk To Running System?
Jul 31, 2010How can I add an eSATA disk to a running system? It is OK if connected before booting, but just not seen if hotplugged
View 1 Replies
ADVERTISEMENT
Ubuntu :: Internal Disk In A Running System Usb-booted System Does Not Result In The System Detecting The Disk
Feb 27, 2011My system decided to crash on me, hard. It was humming along happily for about 2 months and now doesn't boot. If I boot from hard-disk, I get grub. Launching the first kernel choice hangs. I thought maybe the install was corrupt, so I booted from usb install disk. The usb hdd didn't boot; something about an error trying to access /dev/sda . Unplugging the internal disk and plugging in the usb install disk does result in the system booting. Plugging in the internal disk in a running system usb-booted system does not result in the system detecting the disk.
How do I know if the disk is physically broken? This seems unlikely since it does manage to launch grub consistently. Or is this still possible? How can I try to mount whatever is left? The usb install disk doesn't even list the /dev/sd*. Any pointers on how to reformat the drive if it's not being mounted?
General :: Can't Use Esata Disk
Feb 8, 2011Every time I need to do something other then just boot up and use allready installed apps I run into trouble. Today a simpe task of connecting an esata drive was not at all possbile to handle. What ever i tried I got error msg. I tried to turn on the drive before boot. Still error.
View 9 Replies View RelatedGeneral :: Identify If A Disk Is SATA / ESATA?
Mar 9, 2010As we know in Linux both SATA and eSATA disks are enumerated on /dev/sd[x] path. Is there a way using which i can identify if the device is an internal SATA or eSATA?
View 1 Replies View RelatedUbuntu Installation :: Running 10.04 On Non Bootable ESata HD?
May 4, 2010I have a laptop (hp 8530w) with Vista and disk encryption software installed on the internal hard drive. As I cannot touch the internal hard drive, I would like to install and run Ubuntu from an external hard drive (500 hitachi in an enclosure with USB and eSata port). The idea being that when the drive is connected I run Ubuntu and when it is not the internal HDD is used to boot. I already installed Ubuntu 10.04 LTS on this external hard drive. I would like to run it using eSata interface and not USB as the former offers better performance. Unfortunately, as it turns out my BIOS does not allow me to boot directly from eSata disk. I can however boot from USB.
I thought it would be possible to install a boot loader on a USB stick and tell it somehow that Ubuntu is installed on the eSata disk and load the system from there.
I installed GRUB on a USB stick without grub.cfg. This allowed me to load GRUB and get to its shell. Here I discovered another issue. Using GRUB "ls" command the eSata drive is not listed - I can see the USB stick (hd0) and the internal drive (hd1) but no eSata drive. Not being an expert I don't know when in the boot process the eSata disk is detected. If I load Ubuntu completely from USB stick I can see it listed with "fdisk -l" command.
At this point, knowing that I can boot from USB, I'm wondering if there is any way to have a hybrid solution with USB stick storing only what's required to bootstrap Ubuntu, and then have everything else stored on and mounted to my external drive. Is there any other, better way (assuming I cannot do anything on the internal hard drive like repartitioning it, etc ...) to get to what I'm after? I know that I could boot and run Ubuntu using USB interface only but as I stated above I would like to use eSata as it offers better performance. I suppose I'm not the only one trying to do that. Unfortunately my web research did not reveal any solutions.
Hardware :: Adding A LVM Hard Disk To A System Already Running/using LVM?
Aug 9, 2010I have two systems, both having file systems running on LVM. System No 1 has 2 PATA HDD (40 and 80 GB) running linux on LVM. System 2 has a single SATA HDD (300 GB) which again uses LVM. What i was trying to do was to add the two HDD in system 1 to system 2, possibly with little or no data loss. So i connected the PATA drives from system 1 to system 2 and booted up. The system booted up to the openSUSE 11.3 splash screen and stopped after scanning the HDDs. Frankly i never expected openSUSE to try n auto mount the new drives. I think the problem was caused because both the systems had VG and LV of the same names. Can the volume group be renamed, maybe from a live CD or somthing?? System 2 is not boot able now.
View 5 Replies View RelatedOpenSUSE Install :: No Disk Seen When Booting The Disk In Another System?
Jan 2, 2010My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
CentOS 5 :: Build A Bootable System Image On An Attached Hard Disk On A Running Machine?
Feb 27, 2011I would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.
The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.
OpenSUSE Hardware :: 11.3 Does Not Recognize ESATA Drive
Jul 31, 2010I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. Note: /dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.I have a 200GB IDE drive, /dev/sda that I use as a data drive.Both drives are accessible to 11.2 and in use.I installed OpenSuse 11.3 on /dev/sda in partition sda1. The same results occur with 32 bit and 64 bit distribution. I have grub for 11.3 on the the sda1 partition and chainload to it from 11.2 grub.
The installed 11.3 system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not appear to exist.I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps it is support of eSATA drives or the IDE to eSATA adapter that has regressed?
OpenSUSE Install :: 11.3 Does Not Recognize ESATA Drive
Jul 30, 2010I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. I have a 200GB IDE drive, /dev/sda that I use as a data drive. Both drives are accessible to 11.2 and in use.
/Dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.
I chose to install OpenSuse 11.3 on /dev/sda in partition sda1. I've installed 32 bit and 64 bit with the same result. I put grub on the the sda1 partition and chainload to it from 11.2 grub. I'm cautious because OpenSuse can be troublesome during installation.
PROBLEM: The installed system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not exist!
I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps support of eSATA drives.
OpenSUSE Hardware :: Delay From Libata When Connecting ESATA?
Aug 12, 2010I get some errors in dmesg and a delay as libata probes and tries to negotiate with my eSATA enclosure.
Some backstory to this adventure:My mainboard is an MSI K9AGM2-L with the AMD SB600 chipset providing the AHCI SATA controller for four ports, two of which (#s 3 and 4) are available.
A Rosewill RCR-AK-IM5002 internal card reader (manufacturer page missing) provides a SATA-to-eSATA adaptor port.
I wish to use a SAMSUNG Spinpoint M7E HM641JI 640GB 2.5" SATA hard disk drive externally. First, I had a Vantec NST-260SU-BK 2.5" SATA to USB 2.0 and eSATA enclosure. As explained in this forum post, all seemed well at first. But even though I got absolutely no visible errors, I could see (through hash checking and byte-by-byte comparisons) that writing (copying) to the external disk was not happening correctly. After exchanging the enclosure several times, I finally noticed that the retailer had a different (generic) brand, so I got one of those instead. (The particular unit I got was missing its screws; had a protrusion in its casing that obstructed the circuit board's seating; and caused even my mainboard's firmware to lock up when it was probed, twice, on each boot. A replacement with the same model remedied those three issues.)
Now we come to the present. The Comkia MM-G3BK-SUE MobiMe G3 2.5" SATA to USB 2.0 and eSATA enclosure (manufacturer page missing) doesn't seem to exhibit the writing issue (yet) -- hurray! However, it causes libata to struggle for fifteen seconds or so trying to connect when it is plugged in. (It also causes openSUSE to stall while booting for that reason.) Here is the output from dmesg:
Code:
[ 127.732765] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 127.732770] ata4: irq_stat 0x00000040, connection status changed
[ 127.732774] ata4: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 127.732782] ata4: hard resetting link
[Code].....
OpenSUSE Hardware :: ESATA / HDD Docking Station And Power Management
Aug 26, 2011I want to "build" a new backup solution for my home LAN. I have 3 openSUSE machines at various versions and 1 File Server with openSUSE 11.4.My plan is to plug a eSATA or USB3 docking station on the file server and then take backups from the clients either via rsync or Amanda.Since the backup will not be a daily activity, I would like to have the option to run the backup during night, and automatically, BUT, without any action from my part. So, I would like to attach a large external HDD on the machine and then:Power on the docking station/HDD.Perform the backup from the Amanda Server or rsync scripts.Power off the docking station/HDD.Do you know any docking station that has a "linux" power management?If not, how do I power up/power down from console an eSATA or USB HDD?
View 2 Replies View RelatedOpenSUSE Hardware :: Additional Software To View External Esata Drive
Sep 5, 2011I attached an external hard drive to an esata port, when i go to my computer to open the drive, i right click and open in a new window i get install additional software, there is no application installed that can open files of this type block device(inode/blockdevice) di you want to install one install or not do i install the software? I authenticated in dolphin saw the files and folders then unmounted but should i install the software and is it safe or just unnecessary?
View 4 Replies View RelatedRed Hat :: Running IPmonitor To Monitor The Disk Usage On Our Servers - Running Df -h
Mar 19, 2010We are running IPmonitor to monitor the disk usage on our Linux servers. It does not seem to coincide with what is reported when running df -h. For example on a Red Hat 5.3 server - our IPmonitor shows that 85% is used on the /usr partition, however when I do a df -h on the server it shows that 91% is used. Why there would be a discrepancy? IPmonitor uses SNMP.
View 5 Replies View RelatedOpenSUSE :: HDD Working Continuously And System Running Hot
Feb 17, 2010With what software I can slow down my HDD. With Power Manager if i change from Performance to Aggressive Powersave my HDD still working all the time and it's hot all the time on my laptop.
View 1 Replies View RelatedOpenSUSE Hardware :: System Lock-up During Excessive Disk I/O
Aug 17, 2011At times, the disk I/O will go through the roof and cause the system to slow to a crawl. X becomes really slow and can go completely unresponsive, dropping all keyboard input, preventing me from restarting X. Sometimes I will switch to a virtual terminal to log in and run iotop to check what is using all the I/O, but it will be so I/O bound that the login times out. Sometimes I do manage to get in and can run iotop and then it is a matter of waiting 10 minutes or so for python to load up. Usually by this time, whatever was causing the slowdown has finished and so I don't even know what the problem is. Other times it never recovers (I once left it over night, since it was at the end of my work day and just went home)
This is my work computer so it is very inconvenient to have to wait for this I/O blockage or lose all my work rebooting. I thought it was due to swapping, so I disabled swap, but that hasn't helped. I'm running the cfq I/O scheduler, but I've tried both deadline and noop.
Also, is there a way to disable the login timeout so I can at least get logged in to the box from the console when this happens?
OpenSUSE Install :: Running 11.3 Live System On MacBook Air?
Jul 26, 2010I am too stupid to run a live Linux on a Macbook air. I used both, an openSUSE 11.3-KDE Live-CD and a Live-USB key and tried several boot options.
(i) I held down "C" to boot from CD → didn't work. It's an Apple CD drive but came with an older Macbook air a few years ago.
(ii) Found the bootmenu by holding down the option (ALT) key. Neither Live-CD nor Live-USB were shown. You can only choose the harddrive (and available wireless networks).
(iii) "Command-Shift-Option-Delete" to boot from an external drive didn't work either. I assume my USB key is an external drive, right?
I don't want to install openSUSE on the mac I just want to run a live system from time to time. Therefore I want to bypass Boot Camp or rEFIt and that's probably why I am stuck here. I wonder, if I really have to setup one of them to boot into a live system? The wiki article "openSUSE on a Mac" is under review right now.
OpenSUSE :: Disk Full With Temporary Files - System Goes Slower
Jan 24, 2010I am using OpenSuse 11.2 (64 bits) with KDE 4.3.1. My hard disk partition contains 3 areas : / + /home + swap. Frequently the / area is filling with, I suppose, temporary files until it is full (15 Go) and that in a very short time, typically about 5 mn. Then, these files are cleaned by the system, when disk space is needed I suppose. The point is that during this time, the system goes slower and slower until the "cleaning". That seems to occur only when Firefox (3.5.6) is running so I suppose that these files are temporary internet files.
View 9 Replies View RelatedOpenSUSE Install :: Reinstall System Without Formatting Hard Disk?
Aug 31, 2010I've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.
How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?
OpenSUSE Install :: Save Current System As A Bootable Disk?
Feb 7, 2011I would like to copy my system into a DVD that I can later use as a bootable disk. Having such a disk could be handy, as it would contain current software upgrades.
View 1 Replies View RelatedOpenSUSE :: Running Suse 11.3 64bit And OpenOffice 3.2.1.4 It Installed With The System?
Feb 5, 2011I am running Suse 11.3 64bit and OpenOffice 3.2.1.4 it installed with the system.OpenOffice's latest is 3.3 something, is there a repository that I can add to continuously update the program? Or do I need to completely remove the present program and install the latest from OpenOffice.org? It would appear that the one that came with the system was pieced together by the Suse team - do they update this at all?
View 7 Replies View RelatedOpenSUSE Install :: GUI Will Not Load - Insert System Disk And Press Enter
Jan 7, 2011Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies View RelatedOpenSUSE :: GParted File System Support / Running Programs As Root
Sep 27, 2010I have GParted installed, running openSUSE 11.3 with GNOME. When running GParted, it always grayed out most file system actions, supporting only hfs fully. This made no sense, as I had all the required packages installed for other file system support. However, I recently figured out how to get it to work. Using the installed menu button doesn't work, running "gnomesu /usr/sbin/gparted" doesn't work; to get it to work, I have to open up a terminal, type "su -" to log in as root, and then run gparted. The menu button and gnomesu both prompt for a password, so it should be running as root, but launching it through the root terminal is the only way to actually get it to work. Is one root different from another?
View 5 Replies View RelatedOpenSUSE Install :: Good Program To Make Disk Images To Reset System
Aug 20, 2010I have a lot of RAR files and ISO. Is there a program like Winrar which could open them in Linux? Cause now it only opens zip files . Also I would like to know what the best package manager is (I mean the easiest -used to use the Software Manager in Mint 9 Xfce).At last I would like to know if there is a good program to make disk images to reset the system.
View 9 Replies View RelatedUbuntu Installation :: 9.10 - Non-system Disk Or Disk Error With Manual Partitions
Apr 9, 2010This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
Software :: Install GRUB In The MBR Of The Only Bootable Disk In The System, But Load Configuration And Images From Another Disk?
Apr 29, 2011Is it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies View RelatedOpenSUSE Install :: Grub Error 18 - Unknown File System - Running From External Hard Drive
Jan 11, 2011It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
Ubuntu Installation :: Migrate Working Single Disk System To Existing RAID Array Using Disk UUIDs
Aug 1, 2010I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
Debian Installation :: Non-system Disk Or Disk Error ?
Jan 22, 2011After installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
General :: Non-System Disk Or Disk Error?
Oct 17, 2010I have windows and linux distros on my /dev/sda. I tried to install fedora 13, but after reboot I cannot boot up to any of installed systems. I'm getting: Non-System disk or disk errorreplace and striky any key when readyWhen I use ubuntu 10, boot from first hard disk, I'm able to get GNU GRUB version 1.98...nd boot up to any system. but without ubuntu in a cd-rom I'm getting this error.I tried: grub-install /dev/sdX in one of my installed linux distros, but without any success.
View 1 Replies View Related