I would like to copy my system into a DVD that I can later use as a bootable disk. Having such a disk could be handy, as it would contain current software upgrades.
View 1 RepliesIs it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies View RelatedIve been running VirtualBox with a windows XP installation for some time, on an opensuse 11.0 host for some time. Recently, however ive been having issues with suse, and want to take my virtual XP and make it a primary bootable physical partition, on a second disk
I know it can be done, but im not finding how exactly.
What ive tried so far. I've taken VBoxManage terminal tool and converted the VDI to a .img file, and tried to move that to my second physical disk, but it didnt work at all.
After some thinking, I booted to acronis true image within my virtual machine, and cloned the C:/ drive of windows over to my second hard drive. That got me further, but doesn't boot fully. Comes up to windows xp logo, and black screen boot loops.
Ive heard about using vditool to create a .raw file, and then go from there, but im at a loss to find vdi tool
How can i move my virtual machine to a physical, bootable partition on a second drive?
Here is what I would like to pursue: I would aim to create a USB drive which a system can boot from if needed. However, this system would not be the generic Lucid 10.04 iso, it would have specific packages that my current system has. Also, it would start up and run with my current system settings if possible.
I did look into Reconstructor, but it doesn't appear that that would have the capibility of changing the default settings to match my current system's settings. Also, it looked like there wasn't a way to upload a list of current packages of my system (I would have to manually select each package, taking quite a while). So is there any way to make a bootable USB matching my current system? Or is reconstructor the closest thing to that kind of customiz-ability?
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
we have a Win NT4 system used for an important application used at two places. At one place it has gone bad. I want to create an image from good system and restore it at the second location. Is it possible to do this using "clonwzilla live cd"? Does it harm the good system? Can I save the created image to an USB drive?
View 3 Replies View RelatedI would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.
The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.
I am trying to port the current Fedora4 system to the CentOS5 on a new hard disk. Actually, the Fedora4 system is constantly being hacked due to my lazy update. So i prefer a fresh install of CentOS5. I am not clear what files need copy and what does not need for ease and for avoiding possible backdoors.
View 5 Replies View RelatedI've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.
How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?
Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies View RelatedI have a lot of RAR files and ISO. Is there a program like Winrar which could open them in Linux? Cause now it only opens zip files . Also I would like to know what the best package manager is (I mean the easiest -used to use the Software Manager in Mint 9 Xfce).At last I would like to know if there is a good program to make disk images to reset the system.
View 9 Replies View RelatedMy Toshiba Satellite 5205-S705 laptop with Win XP Home sp3 has a non-working cd drive, is riddled with viruses, and isn't capable of booting to a USB drive. (please no comments about paperweights etc., it's all I have!) I want to install a Linux dual-boot version that is heavy on antivirus scanning support. Since I can't boot to an .iso disk, is there any other way to do this? I can transfer files to it via USB thumbdrive or download via Internet.
View 9 Replies View RelatedThere is something that I am not getting here. I get the following when I try to start my XP virtual box stuff. I take it that I actually need an XP disk to do this?
FATAL: No bootable medium found! System halted.
Here is a capture of what I have setup for XP virtual.
Uploaded with ImageShack.us
My system decided to crash on me, hard. It was humming along happily for about 2 months and now doesn't boot. If I boot from hard-disk, I get grub. Launching the first kernel choice hangs. I thought maybe the install was corrupt, so I booted from usb install disk. The usb hdd didn't boot; something about an error trying to access /dev/sda . Unplugging the internal disk and plugging in the usb install disk does result in the system booting. Plugging in the internal disk in a running system usb-booted system does not result in the system detecting the disk.
How do I know if the disk is physically broken? This seems unlikely since it does manage to launch grub consistently. Or is this still possible? How can I try to mount whatever is left? The usb install disk doesn't even list the /dev/sd*. Any pointers on how to reformat the drive if it's not being mounted?
Is there any (command line) utility that can just take current mounted disk settings and write that to fstab?
View 2 Replies View RelatedI got a hard drive with an image of an older redhat OS that i need to do some work with. The hard drive isnt bootable but i need to get into it somehow. I am not even close to an expert on these kinds of things, but i will provide the information that ive got.
fdisk -ul
Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 63 149838254 74919096 83 Linux
/dev/sda2 149838255 156296384 3229065 5 Extended
[Code]....
The simplest way the occurs to me to do this is to virtualize the OS on it. So i installed hypervisor from yast, but (i think) it requires an image of the OS to virtualize it, not some partitions on a hard drive. Is there an easy way around this?
I'm unable to boot into a gparted cd to make modifications to my partition table. I've only noticed it since grub took over the duty of boot manager after installing openSUSE 11.3. Are there any other utilities that I can use either from within openSUSE or boot to, to do the same thing?
View 3 Replies View RelatedIs there a way to get a list of all packages installed since install (that are currently on the system) and upon re-install run an application that will automatically install those packages. This would save greatly on initialisation time (the re-set up afterwards). Essentially, I want to re-install and/or move to another machine and want to the new install to reflect the system as it currently stands.
View 2 Replies View RelatedI want to install SLES11 with my usb key but I couldn't to make it bootable. Because my server are only a cdrom drive, not dvd... I read the following document : SuSE install from USB drive - openSUSE but it doesn't run! So I can mount/umount the usb and linux could see him:
Code:
mount /dev/sda /mnt/usb
but the fsck.vfat doesn't run :
Code:
fsck.vfat /dev/sda1 open /dev/sda1:No such file or directory
Downloaded openSUSE-11.2-DVD-x86_64.iso Burned on a DVD and used to make an install op a Dell laptop Everything went okay. Now I like to make a install on a ASUS UL20A laptop without an optical drive Placed the iso on a USB stick with dd command The stick can be read by openSUSE 11.2 machine NOT by WIN 7 machine I tried to make the USB stick with Win32DiskImager.exe
View 9 Replies View RelatedI understand that one can easily make a bootable USB from a live CD installer. But instead of burning a DVD, I'd like to make a bootable USB from the oss 11.3 DVD iso file. Note: I just want to make a bootable USB, not to install 11.3 on USB. ( There are many reasons to do that, e.g., USB is much easier to carry, and also reuse later for new versions. ) But it seems there is no instruction to do that.
View 9 Replies View RelatedI need some help to set up a bootable USB stick. I have an USB stick, 3.7 gigs big, on which I want to put the OpenSuse Live CD iso, but somehow I am stuck... I have formatted the stick and I have set the boot flag in KDE partitionmanager. Then I have put the .iso on it, using Unetbootin. When I now try to boot it, I get the message
Code:
could not find Kernel boot image: gfxboot
Is maybe the boot flag not set, despite the partitionmanager shows it set? Can I set it also afterwards, after I have installed the .iso on the stick (I tried this already, did not change anything)? Or is there something wrong with the .iso?
Using imagewriter, I was wondering if it's possible to store backup files on it. I have a 8GB usb drive but the imagewriter uses less 2GB to write the iso to it.
View 1 Replies View RelatedI work for a small business that wants a semi-proprietary (branded) os, I've quickly assembled the needed os in susestudio, I now need to alter a lot of images, what's the best way to unpack and repack into a bootable iso?
View 1 Replies View RelatedHow Do I Create Bootable USB Installation For NetBook ?
I am going mad!
I am trying to make a bootable USB installation
so I can try OpenSUSE 11.2 on my NetBook with no CD/DVD drive.
I've Google'd for hours and tried different things
but I can not make a bootable USB of OpenSUSE 11.2.
I am running Ubuntu 10.04 now on my main desktop
and Ubuntu 10.04 now on the NetBook,
but have access to a Windows XP computer too...
The thread's title is very eloquent:I have a Windows 7 ISO image and I would like to "burn" it on a bootable USB pen in order to install it on a netbook.Obviously I am on openSUSE, and all I read so far was instructions to burn an opensuse or any linux distros (the "dd" tales)
View 2 Replies View RelatedI'd like to do a complete backup of my laptop, convert it to ISO, and then create a bootable flash drive with it. I'd like to be able to totally restore, or run (like in Live mode) the image.
View 6 Replies View RelatedI was thinking of trying out the UEFI support that HP has in my laptop BIOS in the next few days. My reasons is that I get a custom boot logo... and (hopefully) a better boot-speed. What is the current state of affairs with the openSuSE UEFI/EFI install support on a empty hdd for x86_64 does anyone know? (badly worded I apologize) This may seem naive but I have struggled to answer this with most posts being about Mac's for obvious reasons.
Specifically, Do I have to have any custom knowledge on formatting the HDD with a GPT partitions or does the installer do this for you? Secondly, How well does the UEFI bootloader tie in with the config tools in YaST2? (I would like to have UEFI but if it turns into some headache in setting up the boot area by hand each time the kernel updates I will forget it.) I can safely say this will be a machine with only openSuSE installed as an OS, no need for any others or any dual-boot problems. This isn't overly urgent and I will dedicate (at least) a whole weekend to tweaking once I buy a new disk and install openSuSE on it. If nobody knows then I will dive in head first and report how I find it and any problems (and severity).
I am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?
View 4 Replies View RelatedI downloaded the latest version of OpenSuse 11.2 Live KDE, I am using VirtualBox to run it, I completed the whole installation. Then, there comes the problem, whatever I do in OpenSuse works, but when I shut down OpenSuse and boot it later, nothing has saved since last time. Example, I tried to create a File.txt on the desktop, then shut down OpenSuse properly. When I boot it again 5 minutes later, the File.txt is not there anymore. I even installed Apache2, and when I came back, i wasn't installed anymore
View 2 Replies View Related