OpenSUSE Hardware :: ESATA / HDD Docking Station And Power Management
Aug 26, 2011
I want to "build" a new backup solution for my home LAN. I have 3 openSUSE machines at various versions and 1 File Server with openSUSE 11.4.My plan is to plug a eSATA or USB3 docking station on the file server and then take backups from the clients either via rsync or Amanda.Since the backup will not be a daily activity, I would like to have the option to run the backup during night, and automatically, BUT, without any action from my part. So, I would like to attach a large external HDD on the machine and then:Power on the docking station/HDD.Perform the backup from the Amanda Server or rsync scripts.Power off the docking station/HDD.Do you know any docking station that has a "linux" power management?If not, how do I power up/power down from console an eSATA or USB HDD?
View 2 Replies
ADVERTISEMENT
Nov 11, 2010
I use a Dell advanced port replicator at home and in the office. Each is connected to a second monitor. In neither place does the monitor actually receive a signal even though the monitor seems to be detected correctly in display settings. The function-F8 key does not have any visible effect.
Oh, almost forgot. At work once when I preparing to shut down the second monitor popped on for a few seconds though it was at the wrong resolution.
View 6 Replies
View Related
Mar 24, 2011
I have been using Linux and Ubuntu only since the last two months on my (2006) Sony Vaio VGN A617S laptop which is going pretty well on Ubuntu 10.10. When installing Ubuntu audio did get installed alright, and the speakers on the laptop itself are working well even now with the right drivers (snd-hda-intel) for the Realtek ALC260 soundcard.
My problem is when laptop is docked to the A/V docking station (I have seen it referred as a port replicator as well - the model number is VGP-PRAV2), with its two external speakers. And these were not on when Ubuntu was being installed. What is interesting is the headphones jack on the laptop does work when the docking station does not.
I have been trying hard and have already tried quite a few things I saw to be related issues, like:
a) adjustments to some IEC958 in alsamixer
b) using a custom mod for the ALC260 card
View 1 Replies
View Related
Jan 9, 2016
Recently (in 2015) our Debian systems started not to recognize HDDs connected via an external docking station.
On my computer I run: (uname -a)
* Linux violin 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) x86_64 GNU/Linux
* If I connect to a flashdrive to the USB2 port, it is recognized as sd* (messages are also written to dmesg/syslog)
* If I connect the USB3 connector of the external docking station with an 1TB WD SATA docked, to this USB2 port (the external docking station has its own power supply, so I do not expect to have a problem with the current, the drive spins up and is spinning), there is nothing in the dmesg/syslog, and no new items under /dev/sd* or lsusb or similar tools.
* If I connect the same external docking station with the same disk via eSATA on a different computer it is recognized. That computer runs the same debian. If I connect through its USB2 port it does not work either.
* I also tried another docking station and USB cable.
View 7 Replies
View Related
Aug 6, 2015
While using Debian Jessie with Gnome 3 and Nautilus file manager, my Startech HDD docking station will not auto mount and can only be mounted using commandline while in root. Previous GNU/Linux distros, such as Ubuntu 14.04, this device auto mounted without issue. All other devices, such as USB HDD, and USB pen drives, auto mount without any problems.
"Initailize Startech device with a 120GB 2.5" SATA HDD Fujitsu drive"
udev creates two block devices
Code: Select all begins with:
brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
brw------- 1 root root 8, 65 Aug 6 10:12 /dev/sde1
changes to:
brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
brw-rw---- 1 root disk 8, 65 Aug 6 10:12 /dev/sde1
dmesg produces the following results:
Code: Select all[ 179.127724] scsi 6:0:0:0: Direct-Access FUJITSU MHW2120BJ G2 0000 PQ: 0 ANSI: 2 CCS
[ 179.128513] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 179.129393] sd 6:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 179.130379] sd 6:0:0:0: [sde] Write Protect is off
[ 179.130388] sd 6:0:0:0: [sde] Mode Sense: 28 00 00 00
[ 179.131903] sd 6:0:0:0: [sde] No Caching mode page found
[Code] ....
Between the thirty second and the fifteen second wait, the block device "/dev/sde1" receives the "disk" group and read/write attributes, however, the drive is still not auto mounted and can only be manually mounted via root. The block device "/dev/sde" remains with the "root" group and read/write attributes are accessible for "root" user only.
How to correct this issue to allow auto mounting?
View 1 Replies
View Related
Mar 24, 2011
I have been using Linux and Ubuntu only since the last two months on my (2006) Sony Vaio VGN A617S laptop which is going pretty well on Ubuntu 10.10. When installing Ubuntu audio did get installed alright, and the speakers on the laptop itself are working well even now with the right drivers (snd-hda-intel) for the Realtek ALC260 soundcard.
My problem is when laptop is docked to the A/V docking station (I have seen it referred as a port replicator as well - the model number is VGP-PRAV2), with its two external speakers. And these were not on when Ubuntu was being installed. What is interesting is the headphones jack on the laptop does work when the docking station does not. I have been trying hard and have already tried quite a few things I saw to be related issues, like:
a) adjustments to some IEC958 in alsamixer
b) using a custom mod for the ALC260 card
View 6 Replies
View Related
Jun 6, 2011
I recently upgraded to Natty (11.04). Looks great but: I can't use it when my laptop (dell latitude E6410) is plugged in my dell docking station. It seems like the attached monitor (DVI) does not get signal input and hence turn to sleep mode.I can say that Ubuntu is still running fine when I unplug it from the docking station.I am using the NVidia driver 270.41.06 (installed as a third party driver by the install process).I can successfully connect and configure an external monitor thru the VGA port.
View 1 Replies
View Related
Feb 21, 2011
I have HP Compaq 6530b laptop running Debian Wheezy AMD64. I have a docking station with a monitor supporting 1680x1050 resolution and the laptop monitor with 1440x900. The video is integrated Intel mobile series 4.Both monitors are identified and working OK. When I use the laptop monitor standalone it runs at the native resolution. When connected to the docking station I can choose dual monitors with both using their native resolutions and the desktop spread on both of them (with the laptop monitor being primary and containing the taskbar and icons). If I choose to mirror the display it sets itself to a lower resolution of 1280x1024 that is supported by both monitors.
The problem is that I want to use one monitor at a time. If I close the lid of the laptop it turns off both monitors instead of using the docking station. When the lid is closed I want the bigger docking station monitor to be primary and working at native resolution and if I open the laptop or remove the laptop from the docking station to use the laptop monitor at it's native resolution.I had Debian Lenny I386 before and it was operating as expected but I made a clean install of Wheezy amd64 and I don't know how to configure it.I don't have xorg.conf file so I don't know where it takes the settings from.
View 3 Replies
View Related
May 18, 2011
I have a Dell E6250 for work and a docking station with dual DVI going to two Dell 1908FPc. It looks like I can only configure two monitors and after I enable dual head support, X11 crashes. I can use Function+F8 to switch between them, but I cannot figure out how to get both monitors on at once. i.e. I close the lid of the laptop to use the dual monitors.
[Code]....
View 1 Replies
View Related
Aug 25, 2010
I have an HP EliteBook 8540p laptop with associated docking station. It is running Ubuntu 10.04. Until now I have been successfully running TwinView with the nvidia-195.36.24 drivers - using the built-in LCD screen and an external LCD monitor, connected via an analog VGA cable.I've changed the screen over to a larger resolution Philips LCD, and it works fine over VGA.
However the image is not as sharp as I'm used to with other monitors, so I'm trying to get it working over the DVI port on the laptop docking station.However I have been quite unsuccessful in getting a picture to appear on the external monitor - Xorg is able to read the EDID information from the monitor, and according to Xorg.0.log has absolutely no problems with finding a valid mode and choosing this monitor as "DFP-1", alongside "DFP-0" (laptop display). But no matter what I do I can't get a picture. Xorg.0.log has no errors.
I have unsuccessfully tried: various combinations of xorg.conf options to set "ConnectedMonitor", "CustomEDID" with a EDID .bin downloaded over VGA, etc.a colleague has the exact same laptop and monitor, and has it running fine. However using his xorg.conf still produces no picture.nvidia-settings - tried lots of things a different DVI-connected monitorIt's as if the DVI port is fully functional in every way but its output is somehow disabled. I've also tried other monitors, they don't work either, yet do with a VGA cable.
EDIT: I have checked the DVI cable anything else in terms of enabling a DVI port.
View 1 Replies
View Related
Mar 21, 2010
I have selected to power down the monitor after 30 minutes, and suspend the computer after an hour. It does not work. With Beagle not running (more below), the monitor powers down after 30 minutes as expected. But then later (probably after an hour?) it powers up again and stays that way. Not exactly what I envisioned.I have removed Beagle from the set of running processes. The process list ("ps ax") shows Beagle as a serious consumer of CPU time, far more than any other process. (At termination it was at 500:00; the next most hungry process was /usr/bin/Xorg at 10:00. Most barely get over 0:01.) It introduces these problems:
1. after some amount of system idle time (it is about 5 - 10 minutes) Beagle starts consuming vast wodges of CPU time. I have dual core AMD 5200; both CPUs run up to about 70% usage until I do anything, like move the mouse. Then the usage drops back to the usual 5 - 10%.
2. When Beagle is thrashing the CPUs, the power management monitor thinks the system is busy. And powers down nothing.
View 4 Replies
View Related
Sep 29, 2010
I've attached a UPS to my server through USB. and sure enough up came a tab in Power Management Preferences for the UPS -- great.
There are power low options as follows:
"When UPS power is low"
"When UPS power is critically low"
The UPS sends a message to the computer when a threshold you set in the UPS is reached, in my case 25% of battery left.
The obvious guess is that this warning from the UPS is the "When UPS power is low" however, I don't know. It's just a guess.
Looking further at the data I can get from the UPS the battery data is as follows:
battery.charge: 100
battery.charge.low: 25
battery.charge.warning: 50
battery.runtime: 760
[Code]....
However, again, that's just a guess from what would make sense.
So my first question is, is there a way to know this information, and is there a place were these critical points are set, or are they all from the UPS. I'm guess there are some settings somewhere because not all UPSs are going to be able to supply this information. Some may only supply a battery level or some just a warning message so there must be some configuration for this somewhere.
My 2nd question is a probably a little harder to know the answer to. After getting this to work I wanted the added functionality of nut so I installed it and got it working and it uses the On UPS Power panel as far as I can tell.
Through all the nut documentation it talks about powering down on once the battery level reaches the critical point (I assume that is "When UPS power is critically low"). I don't see anywhere however where it mentions handling "When UPS power is low" so now the question comes up, will it have any effect at all with nut installed, i.e. what will happen?
Of course I can just "pull the plug" and start finding this stuff out but Linux is all about having the information and "knowing" (assuming all works as it should) I am asking to find out where this information would be -- and become smarter for it
View 5 Replies
View Related
May 22, 2011
I've got openSUSE 11.4 64 bit system with stable 2.6.38 kernel and KDE 4.6.3. Problem is that when I want to change some settings in the power management (like brightness, screen energy saving time-off, display dim), they doesn't seem to save, even after the X restart and full reboot. It's seems like screen energy saving is set permanently for couple of minutes, don't matter what time do i set, it just discards my settings, even they are correctly viewed in the gui.
View 9 Replies
View Related
Apr 2, 2010
I've just installed openSuSE 11.2, and I need to disable the feature that causes the laptop to suspend when you close the lid (and it's plugged in to the wall). I've already done this for my user profile, and I've attempted to do it for the root profile, as well, but when the GDM login screen is shown, the laptop still suspends when you close the lid.
View 3 Replies
View Related
Apr 20, 2010
After I have installed the Education package I cannot put my HP Pavilion laptop to sleep mode. I opened the Power Management and I can see the red light next to "CPU can be turn off". Also, when I close laptop lid it doesn't go to "Suspend to RAM" mode it still spin the fan.
View 2 Replies
View Related
Jan 6, 2010
I want to disable display power management.
I tried to achieve this by disabling 'Enable display power management' checkbox in the 'Configure Desktop -> Display -> Power Control' KDE configuration dialog. That didn`t help and display still goes into standby mode after some period of inactivity. Also, I tried to disable dpms functionality by calling 'xset -dpms'. That didn`t help too. Note that 'xset dpms force standby'
View 9 Replies
View Related
Jan 19, 2011
I am trying to reduce my uptime of my servers. I would like to have a way to bring the systems down during off hours, an come back online during first use. I know about WOL (wake on lan) found in the bios, but it seems as if the OS is missing something to complete the configuration.Are there any good docs (of which I havent found any yet, which is why I ask) on this topic? How about best practices to assist in power management?
View 5 Replies
View Related
Aug 15, 2011
Just found my PC with screen fully lit a good half-hour after leaving it. Went into "system settings" and checked the power-management settings and, as I expected, there were no management profiles. "Here we go again" I thought and logged off and then back on again. Checked the settings and there was "performance", the only one available. As usual in this situation, I'd tried "restore default profiles" and there were none.
Why does this profile keep getting lost in this manner? Where is it (and defaults if any?) supposed to be stored?
Graham Davis, Bracknell, Berks.
openSUSE 11.4 (32-bit); KDE 4.7.0; AMD Phenom II X2 550 Processor;
Video: nVidia GeForce 210; Sound: ATI SBx00 Azalia (Intel HDA);
Wireless: BCM4306
View 3 Replies
View Related
Jul 31, 2009
I've got a rather annoying problem with OpenSUSE 11.1 x86_64, I can't turn off the display power management! I've tried from the KDE 3 and 4 settings as well as GNOME, and finally YaST2. There's nothing in monitor's controls (the buttons on the monitor itself). The actual GUI controls in KDE/GNOME/YaST2 work (as opposed to being grayed out or disabled) and the system doesn't complain when I hit apply/OK, but every time I disable display power management, I wait about 15 minutes and sure enough, the screen blanks. I've checked and made sure the screen saver is disabled, I've looked for a setting to change in the YaST2 sysconfig editor and the kernel settings app, but can't seem to find anything. The only other thing I can think of is to try the acpi=off kernel boot option. I'd rather not resort to that. Anyone know if there is some super secret hidden setting somewhere that might be overriding everything else? Could this be some sort of ACPI incompatibility issue?
View 2 Replies
View Related
Sep 14, 2009
I am a brand new user coming from the MS environment. My impression of openSUSE is that it is like moving into a new house that is well built but the rooms are full of half-constructed self-assembly furniture and appliances without any specific instructions. Nor is it clear which does what and whether all are needed or not. There is a town hall down the road where fellow homeowners gather to discuss what each has managed to deduce about putting their own furniture together. The town hall has a sort of library where thousands of pieces of paper with instructions are stored in an ad-hoc filing system
My latest problem is that I have created a screensaver via the "Configure Desktop" application and set "Enable display power management" and set some timeouts.However, I seem to be asked for a password to unlock the screen when I come back to my computer. I have spent 2 hours trying to find the place where I can disable screen password locking but to no avail. I am perplexed and frustrated at how such an obvious function is so ****ed hard to configure. This is the impression I am getting of Linux in general - it is novice user-hostile and badly organised.
View 9 Replies
View Related
May 28, 2010
I run V11.1 on a minimalised install on a stick with TWM, no KDE at all but I cant get rid of the screen shutdown after about 20 minutes. Also I have several other boxes with v11.1 with KDE and still cant get rid of these screen shut downs.I dont believe this is coming from the bios in these machines. they are all Intel D945 MBs with some sort of Nvidea cards.
My app normal runs with no user mouse or input and is pocessor intensive.I would like to retain the power shutdown and reboot capability from comand line.I realise its not as simple as pulling symlinks of of the init levels in the new complicated distros, but I was suprised the non kde twm install still shuts down the screen.So I want a low level level fix that will remove anything kicked off by init that will derate the system performance or turn off the screen.
View 4 Replies
View Related
May 28, 2010
On the last release, I had this app installed where I could pick my power profile. I could use power conservatively, and performance would suffer a bit, but longer batt life,or I could have it automatically detect, or I could have the apps use all the power they want and then some. I'm looking to reinstall that app. What was the name of it?I can't remember, and so far, can't find.
View 2 Replies
View Related
Jan 27, 2010
Alright this is not a huge issue but a rather annoying one. I hook my laptop up to my lcd to watch movies all of the time. The problem is though I have selected and reselected many times for the screen to not power off after so many minutes of inactivity. But for some reason it doesnt work. If i set it to an 1 it still like every 5 minutes turns off my screen. Im running 9.10 on a toshiba satellite with an intel graphics card.
View 2 Replies
View Related
May 15, 2010
I have a laptop with 10.04 installed. When it is plugged in with AC Power, the screen fades black after a few minutes and locks up after about 10 minutes (shows a dialog for passwd when back).This gets really annoying when listening a movie or just reading text.System->Preferences->Power Management is set to "never" for everything.gconf-editor->apps->gnome-power-management is set to "0" for everything finishing with *_ac.
View 1 Replies
View Related
Sep 22, 2010
I am wanting to completely disable Power Management, can I do it through the GUI? I am a former OpenSuSE user & am use to YaST. So it is a little hard finding ways to edit some settings.
View 2 Replies
View Related
Oct 12, 2010
I just did a fresh installation of Kubuntu 10.10 on a laptop last night, which has a 1.6GHz Intel Core Duo CPU.
I was very disappointed to find that there appears to be no way to configure CPU frequency scaling in the System Settings. There were options for this in 10.04.
I prefer to have the CPU running at maximum speed when running on A/C. In Maverick, however, I have had to resort to installing cpufreq-utils, and setting the CPU cores to 'performance' from the command line.
I like this laptop a lot, but even many simple games run sluggishly if the CPU cores are not set to run at max GHz. (As a matter of fact, this machine is much more sluggish even with CPU cores running at maximum in 10.10 than was the case in 10.04.)
I wonder why such an important option would have been removed from the power management settings?
View 4 Replies
View Related
Dec 25, 2010
when i get the Graphics device driver on, then the power management not work. it can not change the CPU frequencies, and it can not change the LCD backlight and save the change. I try a lot, install laptop-mode-tools,and change thd setting, it still not work...
ubuntu 10.04.1
linux 2.6.32-27-generic
i5 460m CPU
ATI HD5470
View 2 Replies
View Related
May 30, 2011
Ok, I am running a file server that can be accessed throughout the house. I was able to successfully wake from suspend and it works beautifully. Now what I need the computer to do is go to sleep after lets say 30 minutes of inactivity so that I never have to touch the computer and it will use minimal power until I need it.
Anyhow, I tried to set the settings in Power management and the only thing that happens is the display turns off. the suspend on the desktop works fine, I can type in sudo pm-suspend and that works fine. but the computer just wont go to suspend automatically by way of the power manager.
I have tried changing the /etc/pm/config.d/00sleep_module to say SLEEP_MODULE="uswsusp", but that only made the computer go into some crazy linux mode that I had to reboot from. I had to change SLEEP_MODULE="kernel" (actually, I left it blank as it is the default).
I also turned off my screensaver so there wouldn't be any confusion from that.
I also ran cat /var/log/pm-powersave.log and I got a long list with the following being one of the main texts that kept repeating. "/usr/lib/pm-utils/power.d/sched-powersave false:**sched policy powersave OFF"
View 1 Replies
View Related
Jun 16, 2011
I'm fairly used to working with Fluxbox.There,if I want to let myself suspend the computer, all I have to do is add something like Code:[exec] (suspend) {sudo /usr/sbin/pm-suspend}to my .fluxbox/menu and it works like a charm, after having added me to the sudoers. I nstalled openbox earlier today because I was having some font rendering issues in flux and I've been trying to find a way to add something similar to my menu without success. I added this to .config/openbox/menu.xml:
Code:
<item label="suspend">
<action name="Execute">
[code]....
View 4 Replies
View Related
Apr 17, 2010
I've got a new netbook - Dell Inspiron mini 1011. I have installed slackware 13 on it. According to dell's website its battery should last up to 9 hours:Quote:Mini 10 offers up to 9.5 hours of battery life1 to keep you on the go.I understand that it depends on a variety of factors and these are just testing estimations that will probably never be achieved IRL.For 95% of the time I don't run X on it. Just emacs (gnus), nethack, elinks. If I do run X, it's fluxbox. The average battery time is 2hrs - 2.5hrs. I understand that Slackware 13 is not designed specifically for netbooks, but 2hrs is way off the 9-hour estimation. Either the battery is faulty, or it's the power management issue. Before I deal with the battery, I'd like to ask you for some suggestions on improving the power management. The acpi and acpid are installed on the system. Are there any packages that would improve the battery performance? Or perhaps some config options?I believe that recompiling the kernel would improve it, wouldn't it? What options I'd have to set/unset?P.S.Unfortunately, once I checked the netbook is ok, I removed WinXP that came with it, so can't compare with it.
View 14 Replies
View Related
