OpenSUSE Hardware :: Additional Software To View External Esata Drive
Sep 5, 2011
I attached an external hard drive to an esata port, when i go to my computer to open the drive, i right click and open in a new window i get install additional software, there is no application installed that can open files of this type block device(inode/blockdevice) di you want to install one install or not do i install the software? I authenticated in dolphin saw the files and folders then unmounted but should i install the software and is it safe or just unnecessary?
View 4 Replies
ADVERTISEMENT
Mar 19, 2010
If I wanted to install Ubuntu to an external eSATA drive, how would I do that and not screw up the GRUB install on my primary internal drive? I'm guessing I would want to tell that eSATA installation to install its GRUB to the first partition on that drive rather than on my primary internal, but then.... how would I get there from the GRUB on my primary drive?I guess my problem is that the eSATA drive is not always powered up, and I'm not sure what GRUB (on the primary internal drive) would do if there was an entry pointing to a drive that wasn't there (because it's not turned on)
View 1 Replies
View Related
May 15, 2010
I have an eSata external hard drive connected to my desktop running Ubuntu 10.04 LTS. I searched around for some info on how to mount an eSata external hard drive and was not successful. Most of the posts were talking about stuff after the drive has been mounted.
View 4 Replies
View Related
Jun 16, 2010
I have an external hard drive that connects through an expansion card with eSATA on it. It was partitioned and formatted as NTFS in Windows but isn't recognized in Ubuntu 10.04.
View 1 Replies
View Related
Jul 31, 2010
I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. Note: /dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.I have a 200GB IDE drive, /dev/sda that I use as a data drive.Both drives are accessible to 11.2 and in use.I installed OpenSuse 11.3 on /dev/sda in partition sda1. The same results occur with 32 bit and 64 bit distribution. I have grub for 11.3 on the the sda1 partition and chainload to it from 11.2 grub.
The installed 11.3 system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not appear to exist.I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps it is support of eSATA drives or the IDE to eSATA adapter that has regressed?
View 9 Replies
View Related
Jul 30, 2010
I have a working installation of OpenSuse 11.2 on a 300GB eSATA drive, /dev/sdb. I have a 200GB IDE drive, /dev/sda that I use as a data drive. Both drives are accessible to 11.2 and in use.
/Dev/sdb is actually an IDE drive with an eSata adapter since my mother board only has one IDE ribbon input that I use for /dev/sda and the DVDRW drive.
I chose to install OpenSuse 11.3 on /dev/sda in partition sda1. I've installed 32 bit and 64 bit with the same result. I put grub on the the sda1 partition and chainload to it from 11.2 grub. I'm cautious because OpenSuse can be troublesome during installation.
PROBLEM: The installed system will not recognize the second drive /dev/sdb or any of its partitions. It does not show up on /var/log/messages -- it does not exist!
I believe this problem is with 11.3 because 11.2 recognizes both disks. Perhaps support of eSATA drives.
View 9 Replies
View Related
Dec 2, 2010
I have an external eSATA hard drive that has been working fine for months for backing up (I had been rsync'ing to it every night). For my configuration, see [URL]
I can no longer mount the drive with eSATA (doesn't even recognize it). It was mounted on /dev/sdb1. The drive also has a USB ... I tried that and it mounts fine.
So, my data is ok, but I want to resume nightly backups (via eSATA).
Here is some output:
fstab (2 lines below 'cause I swap HDD's between my dock and offsite storage):
Code:
proc /proc proc defaults 0 0
UUID=228d6ffc-c50e-425d-a768-fcb9c22d8383 / ext3 relatime,errors=remount-ro 0 1
UUID=aa75b03b-5037-4b0b-b73b-0c1f017c89dd none swap sw
[Code].....
View 9 Replies
View Related
Feb 21, 2010
My Motherboard has 4 SATA ports on it, Is there a way short of buying an expensive RAID card to add more SATA drives and do a software raid still? What about getting an external 8-bay eSATA enclosure and putting drives in it? Will the OS see this and software raid? (linux)
View 2 Replies
View Related
Apr 16, 2010
Not sure if this goes here or the hardware section. I've added another sata drive to my system formatted to Ext4, but i have to put in my password for root priveliges (spell?) to access it. I can understand from a security point of view about the password, but there is no way to create new folders or even copy/paste data to it, as the options are not available with the right/click mouse.My external USB drive requires no password, and i can do all the usual functions with it, but not so with the internal sata drive. Is there a way to enable the internal drive for 'normal' operations.
View 2 Replies
View Related
Apr 24, 2011
I have an HP laptop with Ubuntu 10.10. Is there a way to view the CPU temperature without needing additional hardware?
View 9 Replies
View Related
Dec 6, 2009
I have external hard drive which I used to connect via eSATA. I have edited fstab and it looks like that now: UUID=35C595D5738A319A /media/DATA ntfs auto,user,exec,suid,rw 0 0 The problem is that I can't unmount it as normal user, when do that, receive: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=35C595D5738A319A from /media/DATA
View 2 Replies
View Related
Jan 1, 2015
I want to know if it is possible to boot Debian from an external disk connected to an esata port which is plugged in as an expresscard.
A laptop I run Linux Mint on has an expresscard adapter which I plan purchase an esata card for. This would provide 2 esata ports.
I will have another harddrive with Debian installed.
I will then use an external enclosure to connect the Debian drive to the esata port.
I would then add a custom grub entry to point to the drive connected via esata over the expresscard adapter.
The expresscard requires drivers : [URL] ....
Does the environment of the initial grub screen have the necessary drivers to boot from the drive attached over the esata? Is there a way to load them?
Another solution mentions using kexec (first comment under question) : [URL] ....
This seems to require the drivers having been loaded too.
View 0 Replies
View Related
Mar 5, 2009
I am new to Fedora 10 and encountered the following problem. I installed FC10 on an external eSATA hard drive (sdb) on my laptop which already has some other Linux distros on sda. I used a DVD that came with the Fedora 10 Bible, so I can assume that the DVD had no problems. The installation went OK and I got no error messages. I added the following lines to the menu.lst file of the distro that I use to boot all my distros.
title Fedora 10
root (hd1,1)
kernel /boot/vmlinuz-2.6.27.15-170.2.24.fc10.i686 ro root=/dev/sdb2 rhgb quiet
initrd /boot/initrd-2.6.27.15-170.2.24.fc10.i686.img
When I boot Fedora, the blue bar at the bottom of the screen goes half-way, then gives me the error message: "mount: could not find filesystem '/dev/root' "
View 5 Replies
View Related
Mar 17, 2009
This machine has two internal HDDs which are dedicated to Vista (ergh). For various reasons, I elected to use an external drive for the installation of Linux. When I installed Fedora, I didn't have an eSATA cable, so I installed it via USB. if I change the boot device so it boots off the USB drive, the machine apparently remaps the drive to BIOS drive 0. However, when Linux boots, it'll still be considered sdc. So far so good. However, when I plug in the eSATA cable and try to boot Linux that way, the machine will boot off the internal sda because the only available option is "Internal Hard Drive." (And yes, the eSATA is working properly.)
I obviously need to install GRUB on the first drive, and it will then let me choose between Vista and Linux. I've done this kind of thing before on other machines and haven't had to much of a problem. However, running 'grub-install /dev/sda' resulted simply in blowing away my Vista boot loader, and a Grub installation that would hang at a black screen. Which of course then resulted in a plethora of pain trying to fix it with Microsoft's deliberately pathetic engineering.What did I do wrong there? And incidentally, the external hard drive isn't always going to be hooked up, so I don't want to be dependent on it to get into Vista.
View 3 Replies
View Related
Jul 7, 2010
Anyone got any experience with eSATA cards and drives under RHEL4? I've got a client with two RHEL4 boxes that want to add eSATA cards and drives for backup purposes.
They really need to automount like a USB drive does, would RHEL4 automount eSATA?
View 5 Replies
View Related
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
Aug 12, 2010
I'm trying to copy files from my external hard drive to the desktop and instead of the usual copy or move to options, I get a widget menu! How do I correct this so I can copy files?I'm running opensuse 11.3 KDE 64bit
View 5 Replies
View Related
May 18, 2010
I've got an USB-to-IDE hard disk drive enclosure to revive an old IDE harddrive. I installed the drive and connected it to my pc running opensuse 11.2. Unfortunately the drive wasn't recognised, so I couldn't access it. This is the output of dmesg:
Code:
May 18 18:53:57 advo kernel: [81051.520117] usb 1-4: new high speed USB device using ehci_hcd and address 10
May 18 18:53:58 advo kernel: [81053.041979] usb 1-4: New USB device found, idVendor=058f, idProduct=6391
May 18 18:53:58 advo kernel: [81053.042107] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 18 18:53:58 advo kernel: [81053.042208] usb 1-4: Product: USB TO IDE Bridge
[Code].....
View 9 Replies
View Related
Apr 14, 2010
I'm running openSUSE 11.1 32-bit and I'm trying to use my external USB DVD-RW drive. I've tried loading two 11.1 discs in the drive and both of them fail.After putting the dvd in the drive I mount with::mount/dev /scd0 /media/cdrom
and it comes back with:mount: wrong fs type, bad option, bad superblock on /dev/sr0, missing codepage or helper program, or other error.In some cases useful info is found in syslog - try dmesg | tail or so.Second question is can I use this external USB DVD-RW drive to install linux from, or does it have to be an internal drive? If so is there anything special I need to do to get it to look at the drive during boot. I take it this is dependant on a BIOS setting. This is all assuming of course I can get my dvd's to read.
View 9 Replies
View Related
Nov 11, 2010
How to mirror an additional hard drive in Red Hat?
View 2 Replies
View Related
Jul 31, 2010
How can I add an eSATA disk to a running system? It is OK if connected before booting, but just not seen if hotplugged
View 1 Replies
View Related
Aug 12, 2010
I get some errors in dmesg and a delay as libata probes and tries to negotiate with my eSATA enclosure.
Some backstory to this adventure:My mainboard is an MSI K9AGM2-L with the AMD SB600 chipset providing the AHCI SATA controller for four ports, two of which (#s 3 and 4) are available.
A Rosewill RCR-AK-IM5002 internal card reader (manufacturer page missing) provides a SATA-to-eSATA adaptor port.
I wish to use a SAMSUNG Spinpoint M7E HM641JI 640GB 2.5" SATA hard disk drive externally. First, I had a Vantec NST-260SU-BK 2.5" SATA to USB 2.0 and eSATA enclosure. As explained in this forum post, all seemed well at first. But even though I got absolutely no visible errors, I could see (through hash checking and byte-by-byte comparisons) that writing (copying) to the external disk was not happening correctly. After exchanging the enclosure several times, I finally noticed that the retailer had a different (generic) brand, so I got one of those instead. (The particular unit I got was missing its screws; had a protrusion in its casing that obstructed the circuit board's seating; and caused even my mainboard's firmware to lock up when it was probed, twice, on each boot. A replacement with the same model remedied those three issues.)
Now we come to the present. The Comkia MM-G3BK-SUE MobiMe G3 2.5" SATA to USB 2.0 and eSATA enclosure (manufacturer page missing) doesn't seem to exhibit the writing issue (yet) -- hurray! However, it causes libata to struggle for fifteen seconds or so trying to connect when it is plugged in. (It also causes openSUSE to stall while booting for that reason.) Here is the output from dmesg:
Code:
[ 127.732765] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[ 127.732770] ata4: irq_stat 0x00000040, connection status changed
[ 127.732774] ata4: SError: { PHYRdyChg CommWake 10B8B DevExch }
[ 127.732782] ata4: hard resetting link
[Code].....
View 1 Replies
View Related
Apr 12, 2010
My external disk does not appear as mounted on the desktop (It's e-Sata and NTFS, samsung 1.36 Tera bytes ) There's nothing in /media, nor it appears on the desktop as mounted. What can i do to be able to use it?
[code]...
View 9 Replies
View Related
Feb 14, 2011
When I plug my USB drive in, the kernel sees it and I can mount it manually. However, it won't automount. I've done plenty of google searches but nothing I've tried has worked for 'GNOME, SUSE 11.3.' I am not sure if it is a permissions problem, configuration problem, a kernel automount, HID, or USB problem.
uname -a (stock SUSE desktop kernel):
Code:
Linux linux-hez9 2.6.34.7-0.7-desktop #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 i686 i686 i386 GNU/Linux
Here is the output from /var/log/messages:
Code:
Feb 14 15:47:09 linux-hez9 kernel: [16258.620213] usb 1-1: new high speed USB device using ehci_hcd and address 6
Feb 14 15:47:09 linux-hez9 kernel: [16258.749549] usb 1-1: New USB device found, idVendor=1058, idProduct=1023
Feb 14 15:47:09 linux-hez9 kernel: [16258.749553] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 .....
View 9 Replies
View Related
May 13, 2011
What is the best way to password protect an external drive? After searching I found a few programs which seem to perform what I want to do.
View 5 Replies
View Related
Sep 14, 2011
So I've got a weird issue with my usb external drive. It's a generic enclosure in to which I've mounted a toshiba IDE drive. It appears as "Generic USB to IDE bridge".Said drive works fine on every machine I try to use it on, but NOT my laptop. Oh, it will appear in LSUSB, and in dmesg, (sometimes it appears, but the partitions do not, e.g. I see sdc, but not sdc1 and sdc2).
However, on any attempt to access it (it mounts fine too), Dolphin hangs (and so does most of KDE). I assume a disk sleep is the problem. Unplugging the drive resolves the hang. ages later, the drive will copy bits of data in small spurts, until it hangs for some more time. After a while, I see an ACHI/USB reset message in the system logs, and the drive resumes copying for some more time.
The drive is bus powered, but it doesn't matter if I use one/both USB connectors, and like I said, it works fine on my desktop, which also has SuSE 11.4 on it. Any ideas what's going on? Sorry if I left out some info, I wanted to get this out and let you folks stew over it while I'm running some errands.
View 9 Replies
View Related
Jan 6, 2010
I have a large external drive, which I connect to my laptop via a PCMCIA card - the machine is old and does not have USB 2.0 built in, so I use the PCMCIA card for that.
I am thinking of the following setup, and hope you can give me some tips on whether or not that would be a sound solution:
- designate a boot partition on the laptop's internal hard drive, which could store kernels
- make up a linux partition (or more than one) to use as root for any distribution on the external drive
- keep /home as separate partition on the external drive
My goal in mind is to be able to boot more than one Linux partition from the external drive. I can't make it through USB boot because the PCMCIA card is not recognized before a kernel module is loaded, and I can't use the internal USB 1.1 port for the external drive.
Do you think this is the way to go? Currently, I only have my /home partition mounted off the external drive.
View 5 Replies
View Related
Jun 12, 2011
What I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
View 9 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Mar 10, 2011
I have a Dell XPS 420 with a 500gb SATA drive on which Windows Vista is installed. I also have an additional hard drive that I wish to install for an Ubuntu installation. Is it possible to create a dual boot system with Windows on the original HD and Ubuntu on the newly installed HD?
Simply put, my computer will have 2 hard drives. The original hard drive has Windows installed. I would like for the second drive to contain the Ubuntu install so that the only thing changed on the original drive is the MBR (I suppose that's how it would work).
View 4 Replies
View Related
